Abstract: Novel Coconut oil nanofluids of various concentrations have been prepared through ultrasonically assisted sol-gel method. The structural and morphological properties of the copper oxide nanoparticle have been analyzed with respectively and it revealed the monoclinic end-centered structure of crystallite and shuttle like flake morphology of agglomerates. Ultrasonic studies have been made for the nanofluids at different temperatures. The molecular interactions responsible for the changes in acoustical parameter with respect to concentration and temperature are discussed.
Abstract: Coriander is an annual and herbaceous plant, belong to
the apiaceae family. This plant is cultivated world widely. It is well
known for having medicinal properties. The aim of this experiment
was to study seed quality of species grown in Kermanshah
conditions. The experiment was carried out in research farm, Campus
of Agriculture and Natural Resources, Razi University, Kermanshah,
Iran. Coriander (local type) was grown in late spring May (5th and
20th) and Jun (4th and 19th), and plant density (10, 30, 50 and 70
plants m-2) in 2009. The experimental plots were laid out in a
factorial according to a randomized complete block design with three
replications. The fruits were harvest between 83.5 – 106.5 days after
sowing. The essential oil and oil content was extracted by Clevenger
and Soxhlet apparatuses, respectively. Results showed that delay at
planting date increased the oil content. Also, with the increase at
plant density was decreased oil content and essential oil.
Abstract: Natural pozzolan (NP) is one of the potential
prehistoric alternative binders in the construction industry. It has
been investigated as cement replacement in ordinary concrete by
several researchers for many purposes. Various supplementary
cementitious materials (SCMs) such as fly ash, limestone dust and
silica fume are widely used in the production of SCC; however,
limited studies to address the effect of NP on the properties of SCC
are documented. The current research is composed of different SCC
paste and concrete mixtures containing different replacement levels
of local NP as an alternative SCM. The effect of volume of paste
containing different amounts of local NP related to W/B ratio and
cement content on SCC fresh properties was assessed. The variations
in the fresh properties of SCC paste and concrete represented by
slump flow (flowability) and the flow rate were determined and
discussed. The results indicated that the flow properties of SCC paste
and concrete mixtures, at their optimized superplasticizer dosages,
were affected by the binder content of local NP and the total volume
fraction of SCC paste.
Abstract: Processes of plant breeding, testing and licensing of new varieties, patent protection in seed production, relations in trade and protection of copyright are dependent on identification, differentiation and characterization of plant genotypes. Therefore, we focused our research on utilization of wheat storage proteins as genetic markers suitable not only for differentiation of individual genotypes, but also for identification and characterization of their considerable properties. We analyzed a collection of 102 genotypes of bread wheat (Triticum aestivum L.), 41 genotypes of spelt wheat (Triticum spelta L.), and 35 genotypes of durum wheat (Triticum durum Desf.), in this study. Our results show, that genotypes of bread wheat and durum wheat were homogenous and single line, but spelt wheat genotypes were heterogenous. We observed variability of HMW-GS composition according to environmental factors and level of breeding and predict technological quality on the basis of Glu-score calculation.
Abstract: In this paper processes including large deformations of a rubber with hyperelastic material behavior are simulated by the RKPM method. Due to the loss of kronecker delta properties in the mesh less shape functions, the imposition of essential boundary conditions consumes significant CPU time in mesh free computations. In this work transformation method is used for imposition of essential boundary conditions. A RKPM material shape function is used in this analysis. The support of the material shape functions covers the same set of particles during material deformation and hence the transformation matrix is formed only once at the initial stages. A computer program in MATLAB is developed for simulations.
Abstract: Facial features are frequently used to represent local
properties of a human face image in computer vision applications. In
this paper, we present a fast algorithm that can extract the facial
features online such that they can give a satisfying representation of a
face image. It includes one step for a coarse detection of each facial
feature by AdaBoost and another one to increase the accuracy of the
found points by Active Shape Models (ASM) in the regions of interest.
The resulted facial features are evaluated by matching with artificial
face models in the applications of physiognomy. The distance measure
between the features and those in the fate models from the database is
carried out by means of the Hausdorff distance. In the experiment, the
proposed method shows the efficient performance in facial feature
extractions and online system of physiognomy.
Abstract: Square pipes (pipes with square cross sections) are
being used for various industrial objectives, such as machine
structure components and housing/building elements. The utilization
of them is extending rapidly and widely. Hence, the out-put of those
pipes is increasing and new application fields are continually
developing.
Due to various demands in recent time, the products have to
satisfy difficult specifications with high accuracy in dimensions. The
reshaping process design of pipes with square cross sections;
however, is performed by trial and error and based on expert-s
experience.
In this paper, a computer-aided simulation is developed based on
the 2-D elastic-plastic method with consideration of the shear
deformation to analyze the reshaping process. Effect of various
parameters such as diameter of the circular pipe and mechanical
properties of metal on product dimension and quality can be
evaluated by using this simulation. Moreover, design of reshaping
process include determination of shrinkage of cross section,
necessary number of stands, radius of rolls and height of pipe at each
stand, are investigated. Further, it is shown that there are good
agreements between the results of the design method and the
experimental results.
Abstract: Malate dehydrogenase-glutamate oxaloacetate
aminotransferase (MDh-GOAT) enzyme complex (the EC) was
isolated and purified from wheat and rise, their some main physicchemical
properties were studied. Michael-s constants of the EC
MDh-GOAT to malate, glutamate and NAD were investigated. This
kinetic results show a high relationship to glutamate. Taking into
account important role of the the EC in catabolism of glutamate – the
central amino acid of a nitric exchange, there is a sharp necessity of
deeper studying of this enzyme complex. Therefore the basic purpose
of the work is studying the basic physical and chemical properties of
this enzyme complex discovered by us, which would be very
important for understanding the mechanisms of reaction catalyzed by
the EC.
Abstract: This paper presents the study of hardness profile of spur gear heated by induction heating process in function of the machine parameters, such as the power (kW), the heating time (s) and the generator frequency (kHz). The global work is realized by 3D finite-element simulation applied to the process by coupling and resolving the electromagnetic field and the heat transfer problems, and it was performed in three distinguished steps. First, a Comsol 3D model was built using an adequate formulation and taking into account the material properties and the machine parameters. Second, the convergence study was conducted to optimize the mesh. Then, the surface temperatures and the case depths were deeply analyzed in function of the initial current density and the heating time in medium frequency (MF) and high frequency (HF) heating modes and the edge effect were studied. Finally, the simulations results are validated using experimental tests.
Abstract: The aluminum bronze matrix alumina composites using hot press and resin infiltration were investigated to study their porosities, hardness, bending strengths, and microstructures. The experiment results show that the hardness of the sintered composites with the decrease of porosity increases. The composites without and with resin infiltration have about HRF 42-61 of about 34-40% of porosity and about HRF 62-83 of about 30-36% of porosity, respectively. Besides, the alumina composites contain a more amount of iron and nickel powders would cause a lower bending strength due to forming some weaker bonding among the iron, nickel, copper, aluminum under this hot pressing of shorter time.
Abstract: Analytical solution of the first-order and third-order
shear deformation theories are developed to study the free vibration
behavior of simply supported functionally graded plates. The
material properties of plate are assumed to be graded in the thickness
direction as a power law distribution of volume fraction of the
constituents. The governing equations of functionally graded plates
are established by applying the Hamilton's principle and are solved
by using the Navier solution method. The influence of side-tothickness
ratio and constituent of volume fraction on the natural
frequencies are studied. The results are validated with the known
data in the literature.
Abstract: The paper proposes an approach using genetic algorithm for computing the region based image similarity. The image is denoted using a set of segmented regions reflecting color and texture properties of an image. An image is associated with a family of image features corresponding to the regions. The resemblance of two images is then defined as the overall similarity between two families of image features, and quantified by a similarity measure, which integrates properties of all the regions in the images. A genetic algorithm is applied to decide the most plausible matching. The performance of the proposed method is illustrated using examples from an image database of general-purpose images, and is shown to produce good results.
Abstract: In this paper back-propagation artificial neural network
(BPANN) is employed to predict the deformation of the upsetting
process. To prepare a training set for BPANN, some finite element
simulations were carried out. The input data for the artificial neural
network are a set of parameters generated randomly (aspect ratio d/h,
material properties, temperature and coefficient of friction). The
output data are the coefficient of polynomial that fitted on barreling
curves. Neural network was trained using barreling curves generated
by finite element simulations of the upsetting and the corresponding
material parameters. This technique was tested for three different
specimens and can be successfully employed to predict the
deformation of the upsetting process
Abstract: The mechanical and tribological properties in WC-Co
coatings are strongly affected by hardness and elasticity
specifications. The results revealed the effect of spraying distance on
microhardness and elasticity modulus of coatings. The metallurgical
studies have been made on coated samples using optical microscopy,
scanning electron microscopy (SEM).
Abstract: In cancer progress, the optical properties of tissues
like absorption and scattering coefficient change, so by these
changes, we can trace the progress of cancer, even it can be applied
for pre-detection of cancer. In this paper, we investigate the effects of
changes of optical properties on light penetrated into tissues. The
diffusion equation is widely used to simulate light propagation into
biological tissues. In this study, the boundary integral method (BIM)
is used to solve the diffusion equation. We illustrate that the changes
of optical properties can modified the reflectance or penetrating light.
Abstract: In this paper we examine some properties of suborbital graphs for the congruence subgroup r 0 (N) . Then we give necessary and sufficient conditions for graphs to have triangels.
Abstract: In this article we explore the application of a formal
proof system to verification problems in cryptography. Cryptographic
properties concerning correctness or security of some cryptographic
algorithms are of great interest. Beside some basic lemmata, we
explore an implementation of a complex function that is used in
cryptography. More precisely, we describe formal properties of this
implementation that we computer prove. We describe formalized
probability distributions (σ-algebras, probability spaces and conditional
probabilities). These are given in the formal language of the
formal proof system Isabelle/HOL. Moreover, we computer prove
Bayes- Formula. Besides, we describe an application of the presented
formalized probability distributions to cryptography. Furthermore,
this article shows that computer proofs of complex cryptographic
functions are possible by presenting an implementation of the Miller-
Rabin primality test that admits formal verification. Our achievements
are a step towards computer verification of cryptographic primitives.
They describe a basis for computer verification in cryptography.
Computer verification can be applied to further problems in cryptographic
research, if the corresponding basic mathematical knowledge
is available in a database.
Abstract: This paper reports the fatigue crack growth behaviour
of gas tungsten arc, electron beam and laser beam welded Ti-6Al-4V
titanium alloy. Centre cracked tensile specimens were prepared to
evaluate the fatigue crack growth behaviour. A 100kN servo
hydraulic controlled fatigue testing machine was used under constant
amplitude uniaxial tensile load (stress ratio of 0.1 and frequency of
10 Hz). Crack growth curves were plotted and crack growth
parameters (exponent and intercept) were evaluated. Critical and
threshold stress intensity factor ranges were also evaluated. Fatigue
crack growth behaviour of welds was correlated with mechanical
properties and microstructural characteristics of welds. Of the three
joints, the joint fabricated by laser beam welding exhibited higher
fatigue crack growth resistance due to the presence of fine lamellar
microstructure in the weld metal.
Abstract: Land degradation is of concern in many countries. People more and more must address the problems associated with the degradation of soil properties due to man. Increasingly, organic soil amendments, such as compost are being examined for their potential use in soil restoration and for preventing soil erosion. In the Czech Republic, compost is the most used to improve soil structure and increase the content of soil organic matter. Land reclamation / restoration is one of the ways to evaluate industrially produced compost because Czech farmers are not willing to use compost as organic fertilizer. The most common use of reclamation substrates in the Czech Republic is for the rehabilitation of landfills and contaminated sites.
This paper deals with the influence of reclamation substrates (RS) with different proportions of compost and sand on selected soil properties–chemical characteristics, nitrogen bioavailability, leaching of mineral nitrogen, respiration activity and plant biomass production. Chemical properties vary proportionally with addition of compost and sand to the control variant (topsoil). The highest differences between the variants were recorded in leaching of mineral nitrogen (varies from 1.36mg dm-3 in C to 9.09mg dm-3). Addition of compost to soil improves conditions for plant growth in comparison with soil alone. However, too high addition of compost may have adverse effects on plant growth. In addition, high proportion of compost increases leaching of mineral N. Therefore, mixture of 70% of soil with 10% of compost and 20% of sand may be recommended as optimal composition of RS.
Abstract: In this paper, the order, size and degree of the nodes
of the isomorphic fuzzy graphs are discussed. Isomorphism between
fuzzy graphs is proved to be an equivalence relation. Some properties
of self complementary and self weak complementary fuzzy graphs
are discussed.