Abstract: Software and applications are subjected to serious and damaging security threats, these threats are increasing as a result of increased number of potential vulnerabilities. Security testing is an indispensable process to validate software security requirements and to identify security related vulnerabilities. In this paper we analyze and compare different available vulnerabilities testing techniques based on a pre defined criteria using analytical hierarchy process (AHP). We have selected five testing techniques which includes Source code analysis, Fault code injection, Robustness, Stress and Penetration testing techniques. These testing techniques have been evaluated against five criteria which include cost, thoroughness, Ease of use, effectiveness and efficiency. The outcome of the study is helpful for researchers, testers and developers to understand effectiveness of each technique in its respective domain. Also the study helps to compare the inner working of testing techniques against a selected criterion to achieve optimum testing results.
Abstract: Supplier selection, in real situation, is affected by
several qualitative and quantitative factors and is one of the most
important activities of purchasing department. Since at the time of
evaluating suppliers against the criteria or factors, decision makers
(DMS) do not have precise, exact and complete information, supplier
selection becomes more difficult. In this case, Grey theory helps us
to deal with this problem of uncertainty. Here, we apply Technique
for Order Preference by Similarity to Ideal Solution (TOPSIS)
method to evaluate and select the best supplier by using interval
fuzzy numbers. Through this article, we compare TOPSIS with some
other approaches and afterward demonstrate that the concept of
TOPSIS is very important for ranking and selecting right supplier.
Abstract: Single nucleotide polymorphisms (SNPs) hold much promise as a basis for disease-gene association. However, research is limited by the cost of genotyping the tremendous number of SNPs. Therefore, it is important to identify a small subset of informative SNPs, the so-called tag SNPs. This subset consists of selected SNPs of the genotypes, and accurately represents the rest of the SNPs. Furthermore, an effective evaluation method is needed to evaluate prediction accuracy of a set of tag SNPs. In this paper, a genetic algorithm (GA) is applied to tag SNP problems, and the K-nearest neighbor (K-NN) serves as a prediction method of tag SNP selection. The experimental data used was taken from the HapMap project; it consists of genotype data rather than haplotype data. The proposed method consistently identified tag SNPs with considerably better prediction accuracy than methods from the literature. At the same time, the number of tag SNPs identified was smaller than the number of tag SNPs in the other methods. The run time of the proposed method was much shorter than the run time of the SVM/STSA method when the same accuracy was reached.
Abstract: Not many studies have been undertaken on shareholder activism in emerging economies, including Malaysia. Shareholder activism in emerging economies is on the rise. This paper seeks to comprehend the elements of this activism that are unique to Malaysia, specifically with respect to how the agency problem is controlled through shareholder activism in improving corporate governance practices within target companies. Through shareholder activism, shareholders make contact with a target company to voice their dissatisfaction, suggestions, or recommendations. This paper utilises agency theory to explain institutional shareholder activism. This theory has been extensively used within literature on corporate governance with regards to shareholder activism. The effectiveness of shareholder activism in improving corporate governance will be examined as well. This research provides a further understanding of shareholder activism in emerging economies, such as Malaysia; this research also has the potential to enhance shareholder activism and corporate governance practices in general.
Abstract: Service identification is one of the main activities in
the modeling of a service-oriented solution, and therefore errors
made during identification can flow down through detailed design
and implementation activities that may necessitate multiple
iterations, especially in building composite applications. Different
strategies exist for how to identify candidate services that each of
them has its own benefits and trade offs. The approach presented in
this paper proposes a selective identification of services approach,
based on in depth business process analysis coupled with use cases
and existing assets analysis and goal service modeling. This article
clearly emphasizes the key activities need for the analysis and
service identification to build a optimized service oriented
architecture. In contrast to other approaches this article mentions
some best practices and steps, wherever appropriate, to point out the
vagueness involved in service identification.
Abstract: This paper presents a pulse doubling technique in a 12-pulse ac-dc converter which supplies direct torque controlled motor drives (DTCIMD-s) in order to have better power quality conditions at the point of common coupling. The proposed technique increases the number of rectification pulses without significant changes in the installations and yields in harmonic reduction in both ac and dc sides. The 12-pulse rectified output voltage is accomplished via two paralleled six-pulse ac-dc converters each of them consisting of three-phase diode bridge rectifier. An autotransformer is designed to supply the rectifiers. The design procedure of magnetics is in a way such that makes it suitable for retrofit applications where a six-pulse diode bridge rectifier is being utilized. Independent operation of paralleled diode-bridge rectifiers, i.e. dc-ripple re-injection methodology, requires a Zero Sequence Blocking Transformer (ZSBT). Finally, a tapped interphase reactor is connected at the output of ZSBT to double the pulse numbers of output voltage up to 24 pulses. The aforementioned structure improves power quality criteria at ac mains and makes them consistent with the IEEE-519 standard requirements for varying loads. Furthermore, near unity power factor is obtained for a wide range of DTCIMD operation. A comparison is made between 6- pulse, 12-pulse, and proposed converters from view point of power quality indices. Results show that input current total harmonic distortion (THD) is less than 5% for the proposed topology at various loads.
Abstract: The brain MR imaging-based clinical research and analysis system were specifically built and the development for a large-scale data was targeted. We used the general clinical data available for building large-scale data. Registration period for the selection of the lesion ROI and the region growing algorithm was used and the Mesh-warp algorithm for matching was implemented. The accuracy of the matching errors was modified individually. Also, the large ROI research data can accumulate by our developed compression method. In this way, the correctly decision criteria to the research result was suggested. The experimental groups were age, sex, MR type, patient ID and smoking which can easily be queries. The result data was visualized of the overlapped images by a color table. Its data was calculated by the statistical package. The evaluation for the utilization of this system in the chronic ischemic damage in the area has done from patients with the acute cerebral infarction. This is the cause of neurologic disability index location in the center portion of the lateral ventricle facing. The corona radiate was found in the position. Finally, the system reliability was measured both inter-user and intra-user registering correlation.
Abstract: Various intelligences and inspirations have been
adopted into the iterative searching process called as meta-heuristics.
They intelligently perform the exploration and exploitation in the
solution domain space aiming to efficiently seek near optimal
solutions. In this work, the bee algorithm, inspired by the natural
foraging behaviour of honey bees, was adapted to find the near
optimal solutions of the transportation management system, dynamic
multi-zone dispatching. This problem prepares for an uncertainty and
changing customers- demand. In striving to remain competitive,
transportation system should therefore be flexible in order to cope
with the changes of customers- demand in terms of in-bound and outbound
goods and technological innovations. To remain higher service
level but lower cost management via the minimal imbalance scenario,
the rearrangement penalty of the area, in each zone, including time
periods are also included. However, the performance of the algorithm
depends on the appropriate parameters- setting and need to be
determined and analysed before its implementation. BEE parameters
are determined through the linear constrained response surface
optimisation or LCRSOM and weighted centroid modified simplex
methods or WCMSM. Experimental results were analysed in terms
of best solutions found so far, mean and standard deviation on the
imbalance values including the convergence of the solutions
obtained. It was found that the results obtained from the LCRSOM
were better than those using the WCMSM. However, the average
execution time of experimental run using the LCRSOM was longer
than those using the WCMSM. Finally a recommendation of proper
level settings of BEE parameters for some selected problem sizes is
given as a guideline for future applications.
Abstract: In this article, our objective is the analysis of the resolution of non-linear differential systems by combining Newton and Continuation (N-C) method. The iterative numerical methods converge where the initial condition is chosen close to the exact solution. The question of choosing the initial condition is answered by N-C method.
Abstract: In this paper, we consider an iteration process for
approximating common fixed points of two asymptotically quasinonexpansive
mappings and we prove some strong and weak convergence
theorems for such mappings in uniformly convex Banach
spaces.
Abstract: Healthcare providers sometimes use the power of
humor as a treatment and therapy for buffering mental health or easing
mental disorders because humor can provide relief from distress and
conflict. Humor is also very suitable for advertising because of similar
benefits. This study carefully examines humor's widespread use in
advertising and identifies relationships among humor mechanisms,
female depictions, and product types. The purpose is to conceptualize
how humor theories can be used not only to successfully define a
product as fitting within one of four color categories of the product
color matrix, but also to identify compelling contemporary female
depictions through humor in ads. The results can offer an idealization
for marketing managers and consumers to help them understand how
female role depictions can be effectively used with humor in ads. The
four propositions developed herein are derived from related literature,
through the identification of marketing strategy formulations that
achieve product memory enhancement by adopting humor
mechanisms properly matched with female role depictions.
Abstract: A new strategy of control is formulated for chaos synchronization of non-identical chaotic systems with different orders using the Borne and Gentina practical criterion associated with the Benrejeb canonical arrow form matrix, to drift the stability property of dynamic complex systems. The designed controller ensures that the state variables of controlled chaotic slave systems globally synchronize with the state variables of the master systems, respectively. Numerical simulations are performed to illustrate the efficiency of the proposed method.
Abstract: Shippers are concentrating on the core competency to
stay competitive and outsourcing the logistic activities to the third
party who is expert in this field. This third party logistics (3PL) is
drawing the due attention at government, industrial, academicians
and practitioner-s levels. If the logistics cost in India can be brought
down from the current level of 13% of GDP to 9% (level in the U.S.),
the savings would be around Rs 3 lakh crore approximately per
annum. But the problem with the shippers is to select the suitable
3PL provider. Various criteria for selection of 3PL have been listed
in the literature which are discussed in the present literature review.
Every shipper will select the criteria suitable to its own requirement
which have to be dynamically reviewed time to time so as to fit in the
ever changing environment.
Abstract: In this paper, we establish several oscillation criteria for the nonlinear second-order damped delay dynamic equation r(t)|xΔ(t)|β-1xΔ(t)Δ + p(t)|xΔσ(t)|β-1xΔσ(t) + q(t)f(x(τ (t))) = 0 on an arbitrary time scale T, where β > 0 is a constant. Our results generalize and improve some known results in which β > 0 is a quotient of odd positive integers. Some examples are given to illustrate our main results.
Abstract: This study aims to identify processes, current
situations, and issues of recycling systems for four home appliances,
namely, air conditioners, television receivers, refrigerators, and
washing machines, among e-wastes in China and Japan for
understanding and comparison of their characteristics. In accordance
with results of a literature search, review of information disclosed
online, and questionnaire survey conducted, conclusions of the study
boil down to:
(1)The results show that in Japan most of the home appliances
mentioned above have been collected through home appliance
recycling tickets, resulting in an issue of “requiring some effort" in
treatment and recycling stages, and most plants have contracted out
their e-waste recycling.
(2)It is found out that advantages of the recycling system in Japan
include easiness to monitor concrete data and thorough
environmental friendliness ensured while its disadvantages include
illegal dumping and export. It becomes apparent that advantages of
the recycling system in China include a high reuse rate, low
treatment cost, and fewer illegal dumping while its disadvantages
include less safe reused products, environmental pollution caused by
e-waste treatment, illegal import, and difficulty in obtaining data.
Abstract: Equal Channel Angular Pressing (ECAP) is currently
being widely investigated because of its potential to produce ultrafine
grained microstructures in metals and alloys. A sound
knowledge of the plastic deformation and strain distribution is
necessary for understanding the relationships between strain
inhomogeneity and die geometry. Considerable research has been
reported on finite element analysis of this process, assuming threedimensional
plane strain condition. However, the two-dimensional
models are not suitable due to the geometry of the dies, especially in
cylindrical ones. In the present work, three-dimensional simulation of
ECAP process was carried out for six outer corner radii (sharp to 10
mm in steps of 2 mm), with channel angle 105¶Çü▒, for strain hardening
aluminium alloy (AA 6101) using ABAQUS/Standard software.
Strain inhomogeneity is presented and discussed for all cases. Pattern
of strain variation along selected radial lines in the body of the workpiece
is presented. It is found from the results that the outer corner
has a significant influence on the strain distribution in the body of
work-piece. Based on inhomogeneity and average strain criteria,
there is an optimum outer corner radius.
Abstract: Architecture education was based on apprenticeship
models and its nature has not changed much during long period but
the Source of changes was its evaluation process and system. It is
undeniable that art and architecture education is completely based on
transmitting knowledge from instructor to students. In contrast to
other majors this transmitting is by iteration and practice and studio
masters try to control the design process and improving skills in the
form of supervision and criticizing. Also the evaluation will end by
giving marks to students- achievements. Therefore the importance of
the evaluation and assessment role is obvious and it is not irrelevant
to say that if we want to know about the architecture education
system, we must first study its assessment procedures. The evolution
of these changes in western countries has literate and documented
well. However it seems that this procedure has unregarded in
Malaysia and there is a severe lack of research and documentation in
this area. Malaysia as an under developing and multicultural country
which is involved different races and cultures is a proper origin for
scrutinizing and understanding the evaluation systems and
acceptability amount of current implemented models to keep the
evaluation and assessment procedure abreast with needs of different
generations, cultures and even genders. This paper attempts to
answer the questions of how evaluation and assessments are
performed and how students perceive this evaluation system in the
context Malaysia. The main advantage of this work is that it
contributes in international debate on evaluation model.
Abstract: Super resolution (SR) technologies are now being
applied to video to improve resolution. Some TV sets are now
equipped with SR functions. However, it is not known if super
resolution image reconstruction (SRR) for TV really works or not.
Super resolution with non-linear signal processing (SRNL) has
recently been proposed. SRR and SRNL are the only methods for
processing video signals in real time. The results from subjective
assessments of SSR and SRNL are described in this paper. SRR video
was produced in simulations with quarter precision motion vectors and
100 iterations. These are ideal conditions for SRR. We found that the
image quality of SRNL is better than that of SRR even though SRR
was processed under ideal conditions.
Abstract: As the latest advancement and trend in IT field, Green
& Smart IT has attracted more and more attentions from researchers.
This study focuses on the development of assessing tools which can be
used for evaluating Green & Smart IT level within an organization. In
order to achieve meaningful results, a comprehensive review of
relevant literature was performed in advance, then, Delphi survey and
other processes were also employed to develop the assessment tools
for Green & Smart IT level. Two rounds of Delphi questionnaire
survey were conducted with 20 IT experts in public sector. The results
reveal that the top five weighted KPIs to evaluate maturity of Green &
Smart IT were: (1) electronic execution of business process; (2)
shutdown of unused IT devices; (3) virtualization of severs; (4)
automation of constant temperature and humidity; and (5) introduction
of smart-work system. Finally, these tools were applied to case study
of a public research institute in Korea. The findings presented in this
study provide organizations with useful implications for the
introduction and promotion of Green & Smart IT in the future
Abstract: The concept of housing affordability is a contested
issue, but a pressing and widespread problem for many countries.
Simple ratio measures based on housing expenditure and income are
habitually used to defined and assess housing affordability. However,
conceptualising and measuring affordability in this manner focuses
only on financial attributes and fails to deal with wider issues such as
housing quality, location and access to services and facilities.
The research is based on the notion that the housing affordability
problem encompasses more than the financial costs of housing and a
households ability to meet such costs and must address larger issues
such as social and environmental sustainability and the welfare of
households. Therefore, the need arises for a broad and more
encompassing set of attributes by which housing affordability can be
assessed. This paper presents a system of criteria by which the
affordability of different housing locations could be assessed in a
comprehensive and sustainable manner. Moreover, the paper explores
the way in which such criteria could be measured.