Abstract: This paper presents an experimental case using sensory thermography to describe temperatures behavior on median nerve once an activity of repetitive motion was done. Thermography is a noninvasive technique without biological hazard and not harm at all times and has been applied in many experiments to seek for temperature patterns that help to understand diseases like cancer and cumulative trauma disorders (CTD’s). An infrared sensory thermography technology was developed to execute this study. Three women in good shape were selected for the repetitive motion tests for 4 days, two right-handed women and 1 left handed woman, two sensory thermographers were put on both median nerve wrists to get measures. The evaluation time was of 3 hours 30 minutes in a controlled temperature, 20 minutes of stabilization time at the beginning and end of the operation. Temperatures distributions are statistically evaluated and showed similar temperature patterns behavior.
Abstract: A method has been developed for preparing load
models for power flow and stability. The load modeling
(LOADMOD) computer software transforms data on load class mix,
composition, and characteristics into the from required for
commonly–used power flow and transient stability simulation
programs. Typical default data have been developed for load
composition and characteristics. This paper defines LOADMOD
software and describes the dynamic and static load modeling
techniques used in this software and results of initial testing for
BAKHTAR power system.
Abstract: This paper presents the cepstral and trispectral
analysis of a speech signal produced by normal men, men with
defective audition (deaf, deep deaf) and others affected by
tracheotomy, the trispectral analysis based on parametric methods
(Autoregressive AR) using the fourth order cumulant. These
analyses are used to detect and compare the pitches and the formants
of corresponding voiced sounds (vowel \a\, \i\ and \u\). The first
results appear promising, since- it seems after several experimentsthere
is no deformation of the spectrum as one could have supposed
it at the beginning, however these pathologies influenced the two
characteristics:
The defective audition influences to the formants contrary to the
tracheotomy, which influences the fundamental frequency (pitch).
Abstract: The purpose of determining impact significance is to
place value on impacts. Environmental impact assessment review is a
process that judges whether impact significance is acceptable or not in
accordance with the scientific facts regarding environmental,
ecological and socio-economical impacts described in environmental
impact statements (EIS) or environmental impact assessment reports
(EIAR). The first aim of this paper is to summarize the criteria of
significance evaluation from the past review results and accordingly
utilize fuzzy logic to incorporate these criteria into scientific facts. The
second aim is to employ data mining technique to construct an EIS or
EIAR prediction model for reviewing results which can assist
developers to prepare and revise better environmental management
plans in advance. The validity of the previous prediction model
proposed by authors in 2009 is 92.7%. The enhanced validity in this
study can attain 100.0%.
Abstract: The full length mitochondrial small subunit ribosomal
(mt-rns) gene has been characterized for Ophiostoma novo-ulmi
subspecies americana. The gene was also characterized for
Ophiostoma ulmi and a group II intron was noted in the mt-rns gene
of O. ulmi. The insertion in the mt-rns gene is at position S952 and it
is a group IIB1 intron that encodes a double motif LAGLIDADG
homing endonuclease from an open reading frame located within a
loop of domain III. Secondary structure models for the mt-rns RNA
of O. novo-ulmi subsp. americana and O. ulmi were generated to
place the intron within the context of the ribosomal RNA. The in vivo
splicing of the O.ul-mS952 group II intron was confirmed with
reverse transcription-PCR. A survey of 182 strains of Dutch Elm
Diseases causing agents showed that the mS952 intron was absent in
what is considered to be the more aggressive species O. novo-ulmi
but present in strains of the less aggressive O. ulmi. This observation
suggests that the O.ul-mS952 intron can be used as a PCR-based
molecular marker to discriminate between O. ulmi and O. novo-ulmi
subsp. americana.
Abstract: In this paper, a vision based system has been used for
controlling an industrial 3P Cartesian robot. The vision system will
recognize the target and control the robot by obtaining images from
environment and processing them. At the first stage, images from
environment are changed to a grayscale mode then it can diverse and
identify objects and noises by using a threshold objects which are
stored in different frames and then the main object will be
recognized. This will control the robot to achieve the target. A vision
system can be an appropriate tool for measuring errors of a robot in a
situation where the experimental test is conducted for a 3P robot.
Finally, the international standard ANSI/RIA R15.05-2 is used for
evaluating the path-related characteristics of the robot. To evaluate
the performance of the proposed method experimental test is carried
out.
Abstract: Pulse width modulation (PWM) techniques have been
the subject of intensive research for different industrial and power
sector applications. A large variety of methods, different in concept
and performance, have been newly developed and described. This
paper analyzes the comparative merits of Sinusoidal Pulse Width
Modulation (SPWM) and Space Vector Pulse Width Modulation
(SVPWM) techniques and the suitability of these techniques in a
Shunt Active Filter (SAF). The objective is to select the scheme that
offers effective utilization of DC bus voltage and also harmonic
reduction at the input side. The effectiveness of the PWM techniques
is tested in the SAF configuration with a non linear load. The
performance of the SAF with the SPWM and (SVPWM) techniques
are compared with respect to the THD in source current. The study
reveals that in the context of closed loop SAF control with the
SVPWM technique there is only a minor improvement in THD. The
utilization of the DC bus with SVPWM is also not significant
compared to that with SPWM because of the non sinusoidal
modulating signal from the controller in SAF configuration.
Abstract: Risk Assessment Tool (RAT) is an expert system that
assesses, monitors, and gives preliminary treatments automatically
based on the project plan. In this paper, a review was taken out for
the current project time management risk assessment tools for SME
software development projects, analyze risk assessment parameters,
conditions, scenarios, and finally propose risk assessment tool (RAT)
model to assess, treat, and monitor risks. An implementation prototype
system is developed to validate the model.
Abstract: Road rage is an increasingly prevalent expression of
aggression in our society. Its dangers are apparent and understanding
its causes may shed light on preventative measures. This study
involved a fifteen-minute survey administered to 147 undergraduate
students at a North Eastern suburban university. The survey
consisted of a demographics section, questions regarding financial
investment in respondents- vehicles, experience driving, habits of
driving, experiences witnessing role models driving, and an
evaluation of road rage behavior using the Driving Vengeance
Questionnaire. The study found no significant differences in driving
aggression between respondents who were financially invested in
their vehicle compared to those who were not, or between
respondents who drove in heavy traffic hours compared to those who
did not, suggesting internal factors correlate with aggressive driving
habits. The study also found significant differences in driving
aggression between males versus females, those with more points on
their license versus fewer points, and those who witnessed parents
driving aggressively very often versus rarely or never. Additional
studies can investigate how witnessing parents driving aggressively
is related to future driving behaviors.
Abstract: Sampling and analysis of leachate from Bhalaswa
landfill and groundwater samples from nearby locations, clearly
indicated the likely contamination of groundwater due to landfill
leachate. The results of simulation studies carried out for the
migration of Chloride from landfill shows that the simulation results
are in consonance with the observed concentration of Chloride in the
vicinity of landfill facility. The solid waste disposal system presently
being practiced in Delhi consists of mere dumping of wastes
generated, at three locations Bhalaswa, Ghazipur, and Okhla without
any regard to proper care for the protection of surrounding
environment. Bhalaswa landfill site in Delhi, which is being operated
as a dump site, is expected to become cause of serious groundwater
pollution in its vicinity. The leachate from Bhalaswa landfill was
found to be having a high concentration of chlorides, as well as DOC,
COD. The present study was undertaken to determine the likely
concentrations of principle contaminants in the groundwater over a
period of time due to the discharge of such contaminants from
landfill leachates to the underlying groundwater. The observed
concentration of chlorides in the groundwater within 75m of the
radius of landfill facility was found to be in consonance with the
simulated concentration of chloride in groundwater considering one
dimensional transport model, with finite mass of contaminant source.
Governing equation of contaminant transport involving advection and
diffusion-dispersion was solved in matlab7.0 using finite difference
method.
Abstract: In many sensor network applications, sensor nodes are deployed in open environments, and hence are vulnerable to physical attacks, potentially compromising the node's cryptographic keys. False sensing report can be injected through compromised nodes, which can lead to not only false alarms but also the depletion of limited energy resource in battery powered networks. Ye et al. proposed a statistical en-route filtering scheme (SEF) to detect such false reports during the forwarding process. In this scheme, the choice of a security threshold value is important since it trades off detection power and overhead. In this paper, we propose a fuzzy logic for determining a security threshold value in the SEF based sensor networks. The fuzzy logic determines a security threshold by considering the number of partitions in a global key pool, the number of compromised partitions, and the energy level of nodes. The fuzzy based threshold value can conserve energy, while it provides sufficient detection power.
Abstract: An increasingly dynamic and complex environment poses huge challenges to production enterprises, especially with regards to logistics. The Logistic Operating Curve Theory, developed at the Institute of Production Systems and Logistics (IFA) of the Leibniz University of Hanover, is a recognized approach to describing logistic interactions, nevertheless, it reaches its limits when it comes to the dynamic aspects. In order to facilitate a timely and optimal Logistic Positioning a method is developed for quickly and reliably identifying dynamic processing states.
Abstract: A new chelating resin is prepared by coupling
Amberlite XAD-4 with 1-amino-2-naphthole through an azo spacer.
The resulting sorbent has been characterized by FT-IR, elemental
analysis and thermogravimetric analysis (TGA) and studied for
preconcentrating of Cu (II) using flame atomic absorption
spectrometry (FAAS) for metal monitoring. The optimum pH value
for sorption of the copper ions was 6.5. The resin was subjected to
evaluation through batch binding of mentioned metal ion.
Quantitative desorption occurs instantaneously with 0.5 M HNO3.
The sorption capacity was found 4.8 mmol.g-1 of resin for Cu (II) in
the aqueous solution. The chelating resin can be reused for 10 cycles
of sorption-desorption without any significant change in sorption
capacity. A recovery of 99% was obtained the metal ions with 0.5 M
HNO3 as eluting agent. The method was applied for metal ions
determination from industrial waste water sample.
Abstract: This manuscript presents, palmprint recognition by
combining different texture extraction approaches with high accuracy.
The Region of Interest (ROI) is decomposed into different frequencytime
sub-bands by wavelet transform up-to two levels and only the
approximate image of two levels is selected, which is known as
Approximate Image ROI (AIROI). This AIROI has information of
principal lines of the palm. The Competitive Index is used as the
features of the palmprint, in which six Gabor filters of different
orientations convolve with the palmprint image to extract the orientation
information from the image. The winner-take-all strategy
is used to select dominant orientation for each pixel, which is
known as Competitive Index. Further, PCA is applied to select highly
uncorrelated Competitive Index features, to reduce the dimensions of
the feature vector, and to project the features on Eigen space. The
similarity of two palmprints is measured by the Euclidean distance
metrics. The algorithm is tested on Hong Kong PolyU palmprint
database. Different AIROI of different wavelet filter families are also
tested with the Competitive Index and PCA. AIROI of db7 wavelet
filter achievs Equal Error Rate (EER) of 0.0152% and Genuine
Acceptance Rate (GAR) of 99.67% on the palm database of Hong
Kong PolyU.
Abstract: This paper introduces a technique for simulating a
single-server exponential queuing system. The technique called the
Q-Simulator is a computer program which can simulate the effect of
traffic intensity on all system average quantities given the arrival
and/or service rates. The Q-Simulator has three phases namely: the
formula based method, the uncontrolled simulation, and the
controlled simulation. The Q-Simulator generates graphs (crystal
solutions) for all results of the simulation or calculation and can be
used to estimate desirable average quantities such as waiting times,
queue lengths, etc.
Abstract: The recent development of Information and Communication Technology (ICT) enables new ways of "democratic" decision-making such as a page-ranking system, which estimates the importance of a web page based on indirect trust on that page shared by diverse group of unorganized individuals. These kinds of "democracy" have not been acclaimed yet in the world of real politics. On the other hand, a large amount of data about personal relations including trust, norms of reciprocity, and networks of civic engagement has been accumulated in a computer-readable form by computer systems (e.g., social networking systems). We can use these relations as a new type of social capital to construct a new democratic decision-making system based on a delegation network. In this paper, we propose an effective decision-making support system, which is based on empowering someone's vote whom you trust. For this purpose, we propose two new techniques: the first is for estimating entire vote distribution from a small number of votes, and the second is for estimating active voter choice to promote voting using a delegation network. We show that these techniques could increase the voting ratio and credibility of the whole decision by agent-based simulations.
Abstract: The dramatic effect of information technology on
society is undeniable. In education, it is evident in the use of terms
like active learning, blended learning, electronic learning and mobile
learning (ubiquitous learning). This study explores the perceptions of
54 learners in a higher education institution regarding the use of
mobile devices in a third year module. Using semi-structured
interviews, it was found that mobile devices had a positive impact on
learner motivation, engagement and enjoyment. It also improved the
consistency of learning material, and the convenience and flexibility
(anywhere, anytime) of learning. User-interfacelimitation, bandwidth
and cognitive overload, however, were of concern. The use of cloud
based resources like Youtube and Google Docs, through mobile
devices, positively influenced learner perceptions, making them
prosumers (both consumers and producers) of education content.
Abstract: This paper presents a numerical investigation of the
unsteady flow around an American 19th century vertical-axis
windmill: the Stevens & Jolly rotor, patented on April 16, 1895. The
computational approach used is based on solving the complete
transient Reynolds-Averaged Navier-Stokes (t-RANS) equations: a
full campaign of numerical simulation has been performed using the
k-ω SST turbulence model. Flow field characteristics have been
investigated for several values of tip speed ratio and for a constant
unperturbed free-stream wind velocity of 6 m/s, enabling the study of
some unsteady flow phenomena in the rotor wake. Finally, the global
power generated from the windmill has been determined for each
simulated angular velocity, allowing the calculation of the rotor
power-curve.
Abstract: Increasing concerns over climate change have limited
the liberal usage of available energy technology options. India faces
a formidable challenge to meet its energy needs and provide adequate
energy of desired quality in various forms to users in sustainable
manner at reasonable costs. In this paper, work carried out with an
objective to study the role of various energy technology options
under different scenarios namely base line scenario, high nuclear
scenario, high renewable scenario, low growth and high growth rate
scenario. The study has been carried out using Model for Energy
Supply Strategy Alternatives and their General Environmental
Impacts (MESSAGE) model which evaluates the alternative energy
supply strategies with user defined constraints on fuel availability,
environmental regulations etc. The projected electricity demand, at
the end of study period i.e. 2035 is 500490 MWYr. The model
predicted the share of the demand by Thermal: 428170 MWYr,
Hydro: 40320 MWYr, Nuclear: 14000 MWYr, Wind: 18000 MWYr
in the base line scenario. Coal remains the dominant fuel for
production of electricity during the study period. However, the
import dependency of coal increased during the study period. In
baseline scenario the cumulative carbon dioxide emissions upto 2035
are about 11,000 million tones of CO2. In the scenario of high nuclear
capacity the carbon dioxide emissions reduced by 10 % when nuclear
energy share increased to 9 % compared to 3 % in baseline scenario.
Similarly aggressive use of renewables reduces 4 % of carbon
dioxide emissions.
Abstract: This paper deals with the synthesis of fuzzy controller
applied to a permanent magnet synchronous machine (PMSM) with a
guaranteed H∞ performance. To design this fuzzy controller,
nonlinear model of the PMSM is approximated by Takagi-Sugeno
fuzzy model (T-S fuzzy model), then the so-called parallel
distributed compensation (PDC) is employed. Next, we derive the
property of the H∞ norm. The latter is cast in terms of linear matrix
inequalities (LMI-s) while minimizing the H∞ norm of the transfer
function between the disturbance and the error ( ) ev T . The
experimental and simulations results were conducted on a permanent
magnet synchronous machine to illustrate the effects of the fuzzy
modelling and the controller design via the PDC.