Abstract: Fractional Fourier Transform is a generalization of the
classical Fourier Transform. The Fractional Fourier span in general
depends on the amplitude and phase functions of the signal and varies
with the transform order. However, with the development of the
Fractional Fourier filter banks, it is advantageous in some cases to
have different transform orders for different filter banks to achieve
better decorrelation of the windowed and overlapped time signal. We
present an expression that is useful for finding the perturbation in the
Fractional Fourier span due to the erroneous transform order and the
possible variation in the window shape and length. The expression is
based on the dependency of the time-Fractional Fourier span
Uncertainty on the amplitude and phase function of the signal. We
also show with the help of the developed expression that the
perturbation of span has a varying degree of sensitivity for varying
degree of transform order and the window coefficients.
Abstract: In this paper, we analyze and test a scheme for the
estimation of electrical fundamental frequency signals from the
harmonic load current and voltage signals.
The scheme was based on using two different Multi Layer
Artificial Neural Networks (ML-ANN) one for the current and the
other for the voltage.
This study also analyzes and tests the effect of choosing the
optimum artificial neural networks- sizes which determine the quality
and accuracy of the estimation of electrical fundamental frequency
signals.
The simulink tool box of the Matlab program for the simulation of
the test system and the test of the neural networks has been used.
Abstract: As the demand and prices of various petroleum products have been on the rise in recent years, there is a growing need for alternative fuels. Biodiesel, which consists of alkyl monoesters of fatty acids from vegetable oils and animal fats, is considered as an alternative to petroleum diesel. Biodiesel has comparable performance with that of diesel and has lower brake specific fuel consumption than diesel with significant reduction in emissions of CO, hydrocarbons (HC) and smoke with however, a slight increase in NOx emissions. This paper analyzes the effect of cooled exhaust gas recirculation in the combustion characteristics of a direct injection compression ignition engine using biodiesel blended fuel as opposed to the conventional system. The combustion parameters such as cylinder pressure, heat release rate, delay period and peak pressure were analyzed at various loads. The maximum cylinder pressure reduces as the fraction of biodiesel increases in the blend the maximum rate of pressure rise was found to be higher for diesel at higher engine loads.
Abstract: Huge losses in apple production are caused by pathogens that cannot be seen shortly after harvest. After-harvest thermotherapy treatments can considerably improve control of storage diseases on apples and become an alternative to chemical pesticides. In the years 2010-2012 carried out research in this area. Apples of 'Topaz' cultivar were harvested at optimal maturity time for long storage and subject to water bath treatment at 45, 50, 52, 55°C for 60, 120, 180 and 240 seconds. The control was untreated fruits. After 12 and 24 weeks and during so called simulated trade turnover the fruits were checked for their condition and the originators of diseases were determined by using the standard phytopathological methods. The most common originator of 'Topaz' apple infection during storage were the fungi of genus Gloeosporium. In this paper it was proven that for effective protection of 'Topaz' apples against diseases, thermotherapy by using water treatments at temperature range of 50-52°C is quite sufficient.
Abstract: The manufacturing transmission line tower parts has
being generated hazardous waste which is required proper disposal
of waste for protection of land pollution. Manufacturing Process in
the manufacturing of steel angle, plates, pipes, channels are passes
through conventional, semi automatic and CNC machines for
cutting, marking, punching, drilling, notching, bending operations.
All fabricated material Coated with thin layer of Zinc in Galvanizing
plant where molten zinc is used for coating. Prior to Galvanizing,
chemical like 33% concentrated HCl Acid, ammonium chloride and
d-oil being used for pretreatment of iron. The bath of water with
sodium dichromate is used for cooling and protection of the
galvanized steel. For the heating purpose the furnace oil burners are
used. These above process the Zinc dross, Zinc ash, ETP sludge and
waste pickled acid generated as hazardous waste. The RPG has
made captive secured land fill site, since 1997 since then it was
using for disposal of hazardous waste after completion of SLF
(Secured land fill) site. The RPG has raised height from ground
level then now it is being used for disposal of waste as he designed
the SLF after in creasing height of from GL it is functional without
leach ate or adverse impacts in the environment.
Abstract: A new strategy for oriented immobilization of proteins was proposed. The strategy contains two steps. The first step is to search for a docking site away from the active site on the protein surface. The second step is trying to find a ligand that is able to grasp the targeted site of the protein. To avoid ligand binding to the active site of protein, the targeted docking site is selected to own opposite charges to those near the active site. To enhance the ligand-protein binding, both hydrophobic and electrostatic interactions need to be included. The targeted docking site should therefore contain hydrophobic amino acids. The ligand is then selected through the help of molecular docking simulations. The enzyme α-amylase derived from Aspergillus oryzae (TAKA) was taken as an example for oriented immobilization. The active site of TAKA is surrounded by negatively charged amino acids. All the possible hydrophobic sites on the surface of TAKA were evaluated by the free energy estimation through benzene docking. A hydrophobic site on the opposite side of TAKA-s active site was found to be positive in net charges. A possible ligand, 3,3-,4,4- – Biphenyltetra- carboxylic acid (BPTA), was found to catch TAKA by the designated docking site. Then, the BPTA molecules were grafted onto silica gels and measured the affinity of TAKA adsorption and the specific activity of thereby immobilized enzymes. It was found that TAKA had a dissociation constant as low as 7.0×10-6 M toward the ligand BPTA on silica gel. The increase in ionic strength has little effect on the adsorption of TAKA, which indicated the existence of hydrophobic interaction between ligands and proteins. The specific activity of the immobilized TAKA was compared with the randomly adsorbed TAKA on primary amine containing silica gel. It was found that the orderly immobilized TAKA owns a specific activity twice as high as the one randomly adsorbed by ionic interaction.
Abstract: This paper presents a model for the characterization
and selection of beeswaxes for use as base substitute tissue for the
manufacture of objects suitable for external radiotherapy using
megavoltage photon beams. The model of characterization was
divided into three distinct stages: 1) verification of aspects related to
the origin of the beeswax, the bee species, the flora in the vicinity of
the beehives and procedures to detect adulterations; 2) evaluation of
physical and chemical properties; and 3) evaluation of beam
attenuation capacity. The chemical composition of the beeswax
evaluated in this study was similar to other simulators commonly
used in radiotherapy. The behavior of the mass attenuation coefficient
in the radiotherapy energy range was comparable to other simulators.
The proposed model is efficient and enables convenient assessment
of the use of any particular beeswax as a base substitute tissue for
radiotherapy.
Abstract: Employing a recently introduced unified adaptive filter
theory, we show how the performance of a large number of important
adaptive filter algorithms can be predicted within a general framework
in nonstationary environment. This approach is based on energy conservation
arguments and does not need to assume a Gaussian or white
distribution for the regressors. This general performance analysis can
be used to evaluate the mean square performance of the Least Mean
Square (LMS) algorithm, its normalized version (NLMS), the family
of Affine Projection Algorithms (APA), the Recursive Least Squares
(RLS), the Data-Reusing LMS (DR-LMS), its normalized version
(NDR-LMS), the Block Least Mean Squares (BLMS), the Block
Normalized LMS (BNLMS), the Transform Domain Adaptive Filters
(TDAF) and the Subband Adaptive Filters (SAF) in nonstationary
environment. Also, we establish the general expressions for the
steady-state excess mean square in this environment for all these
adaptive algorithms. Finally, we demonstrate through simulations that
these results are useful in predicting the adaptive filter performance.
Abstract: Global Positioning System (GPS) technology is widely used today in the areas of geodesy and topography as well as in aeronautics mainly for military purposes. Due to the military usage of GPS, full access and use of this technology is being denied to the civilian user who must then work with a less accurate version. In this paper we focus on the estimation of the receiver coordinates ( X, Y, Z ) and its clock bias ( δtr ) of a fixed point based on pseudorange measurements of a single GPS receiver. Utilizing the instantaneous coordinates of just 4 satellites and their clock offsets, by taking into account the atmospheric delays, we are able to derive a set of pseudorange equations. The estimation of the four unknowns ( X, Y, Z , δtr ) is achieved by introducing an extended Kalman filter that processes, off-line, all the data collected from the receiver. Higher performance of position accuracy is attained by appropriate tuning of the filter noise parameters and by including other forms of biases.
Abstract: Sleep stage scoring is the process of classifying the
stage of the sleep in which the subject is in. Sleep is classified into
two states based on the constellation of physiological parameters.
The two states are the non-rapid eye movement (NREM) and the
rapid eye movement (REM). The NREM sleep is also classified into
four stages (1-4). These states and the state wakefulness are
distinguished from each other based on the brain activity. In this
work, a classification method for automated sleep stage scoring
based on a single EEG recording using wavelet packet decomposition
was implemented. Thirty two ploysomnographic recording from the
MIT-BIH database were used for training and validation of the
proposed method. A single EEG recording was extracted and
smoothed using Savitzky-Golay filter. Wavelet packets
decomposition up to the fourth level based on 20th order Daubechies
filter was used to extract features from the EEG signal. A features
vector of 54 features was formed. It was reduced to a size of 25 using
the gain ratio method and fed into a classifier of regression trees. The
regression trees were trained using 67% of the records available. The
records for training were selected based on cross validation of the
records. The remaining of the records was used for testing the
classifier. The overall correct rate of the proposed method was found
to be around 75%, which is acceptable compared to the techniques in
the literature.
Abstract: In power systems, protective relays must filter their
inputs to remove undesirable quantities and retain signal quantities of
interest. This job must be performed accurate and fast. A new
method for filtering the undesirable components such as DC and
harmonic components associated with the fundamental system
signals. The method is s based on a dynamic filtering algorithm. The
filtering algorithm has many advantages over some other classical
methods. It can be used as dynamic on-line filter without the need of
parameters readjusting as in the case of classic filters. The proposed
filter is tested using different signals. Effects of number of samples
and sampling window size are discussed. Results obtained are
presented and discussed to show the algorithm capabilities.
Abstract: In developing countries located in monsoon areas like
Thailand where rainwater is currently of no value for urban dwellers
due to easily access to piped water supply at each household, studies
in rainwater harvesting for domestic use are of low interest. However
it is needed to undertake research to find out appropriate rainwater
harvesting systems particularly for small urban communities that are
recently developed from a full rural structure to urban context. As a
matter of fact, in such transitional period, relying on only common
water resources is risky. With some specific economic settings, land
use patterns, and historical and cultural context that dominate
perceptions of water users in the study area, the level of service in
this study may certainly be different from megacities or cities located
in industrial zone. The overviews of some available technologies and
background of rainwater harvesting including alternate resource are
included in this paper. Among other sources of water supply, ground
water use as the water resource of Thailand and also in the study area.
Abstract: An alternative iterative computational procedure is
proposed for internal normal ball loads calculation in statically
loaded single-row, angular-contact ball bearings, subjected to a
known thrust load, which is applied in the inner ring at the geometric
bearing center line. An accurate method for curvature radii at
contacts with inner and outer raceways in the direction of the motion
is used. Numerical aspects of the iterative procedure are discussed.
Numerical examples results for a 218 angular-contact ball bearing
have been compared with those from the literature. Twenty figures
are presented showing the geometrical features, the behavior of the
convergence variables and the following parameters as functions of
the thrust load: normal ball loads, contact angle, distance between
curvature centers, and normal ball and axial deflections.
Abstract: Wavelet neural networks (WNNs) have emerged as a vital alternative to the vastly studied multilayer perceptrons (MLPs) since its first implementation. In this paper, we applied various clustering algorithms, namely, K-means (KM), Fuzzy C-means (FCM), symmetry-based K-means (SBKM), symmetry-based Fuzzy C-means (SBFCM) and modified point symmetry-based K-means (MPKM) clustering algorithms in choosing the translation parameter of a WNN. These modified WNNs are further applied to the heterogeneous cancer classification using benchmark microarray data and were compared against the conventional WNN with random initialization method. Experimental results showed that a WNN classifier with the MPKM algorithm is more precise than the conventional WNN as well as the WNNs with other clustering algorithms.
Abstract: In the present work, we introduce the particle swarm optimization called (PSO in short) to avoid the Runge-s phenomenon occurring in many numerical problems. This new approach is tested with some numerical examples including the generalized integral quadrature method in order to solve the Volterra-s integral equations
Abstract: In this paper, we present parallel alternating two-stage
methods for solving linear system Ax=b, where A is a symmetric
positive definite matrix. And we give some convergence results of
these methods for nonsingular linear system.
Abstract: In this work, we present an automatic vehicle detection
system for airborne videos using combined features. We propose a
pixel-wise classification method for vehicle detection using Dynamic
Bayesian Networks. In spite of performing pixel-wise classification,
relations among neighboring pixels in a region are preserved in the
feature extraction process. The main novelty of the detection scheme is
that the extracted combined features comprise not only pixel-level
information but also region-level information. Afterwards, tracking is
performed on the detected vehicles. Tracking is performed using
efficient Kalman filter with dynamic particle sampling. Experiments
were conducted on a wide variety of airborne videos. We do not
assume prior information of camera heights, orientation, and target
object sizes in the proposed framework. The results demonstrate
flexibility and good generalization abilities of the proposed method on
a challenging dataset.
Abstract: The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon. In this work, rice husk-based activated carbons were prepared via base treated chemical activation process prior the carbonization process. The effect of carbonization temperatures (400, 600 and 800oC) on their pore structure was evaluated through morphology analysis using scanning electron microscope (SEM). Sample carbonized at 800oC showed better evolution and development of pores as compared to those carbonized at 400 and 600oC. The potential of rice husk-based activated carbon as an alternative adsorbent was investigated for the removal of Ni(II), Zn(II) and Pb(II) from single metal aqueous solution. The adsorption studies using rice husk-based activated carbon as an adsorbent were carried out as a function of contact time at room temperature and the metal ions were analyzed using atomic absorption spectrophotometer (AAS). The ability to remove metal ion from single metal aqueous solution was found to be improved with the increasing of carbonization temperature. Among the three metal ions tested, Pb(II) ion gave the highest adsorption on rice husk-based activated carbon. The results obtained indicate the potential to utilize rice husk as a promising precursor for the preparation of activated carbon for removal of heavy metals.
Abstract: As product life cycle becomes less and less every day,
having flexible manufacturing processes for any companies seems more demanding. In the assembling of closures, i.e. opening parts in
car body, hemming process is the one which needs more attention. This paper focused on the robot roller hemming process and how to
reduce its cycle time by introducing a fast roller hemming process. A
robot roller hemming process of a tailgate of Saab 93 SportCombi
model is investigated as a case study in this paper. By applying task
separation, robot coordination, and robot cell configuration principles in the roller hemming process, three alternatives are
proposed, developed, and remarkable reduction in cycle times achieved [1].
Abstract: This paper presents an improvement method of
the multiple pitch estimation algorithm using comb filters.
Conventionally the pitch was estimated by using parallel
-connected comb filters method (PCF). However, PCF has
problems which often fail in the pitch estimation when there is
the fundamental frequency of higher tone near harmonics of
lower tone. Therefore the estimation is assigned to a wrong
note when shared frequencies happen. This issue often occurs
in estimating octave 3 or more. Proposed method, for solving
the problem, estimates the pitch with every harmonic instead of
every octave. As a result, our method reaches the accuracy of
more than 80%.