Abstract: This paper presents a novel genetic algorithm, termed
the Optimum Individual Monogenetic Algorithm (OIMGA) and
describes its hardware implementation. As the monogenetic strategy
retains only the optimum individual, the memory requirement is
dramatically reduced and no crossover circuitry is needed, thereby
ensuring the requisite silicon area is kept to a minimum.
Consequently, depending on application requirements, OIMGA
allows the investigation of solutions that warrant either larger GA
populations or individuals of greater length. The results given in this
paper demonstrate that both the performance of OIMGA and its
convergence time are superior to those of existing hardware GA
implementations. Local convergence is achieved in OIMGA by
retaining elite individuals, while population diversity is ensured by
continually searching for the best individuals in fresh regions of the
search space.
Abstract: A well balanced numerical scheme based on
stationary waves for shallow water flows with arbitrary topography
has been introduced by Thanh et al. [18]. The scheme was
constructed so that it maintains equilibrium states and tests indicate
that it is stable and fast. Applying the well-balanced scheme for the
one-dimensional shallow water equations, we study the early shock
waves propagation towards the Phuket coast in Southern Thailand
during a hypothetical tsunami. The initial tsunami wave is generated
in the deep ocean with the strength that of Indonesian tsunami of
2004.
Abstract: This paper presents an exact solution and a finite element method (FEM) for a Piezoceramic Rod under static load. The cylindrical rod is made from polarized ceramics (piezoceramics) with axial poling. The lateral surface of the rod is traction-free and is unelectroded. The two end faces are under a uniform normal traction. Electrically, the two end faces are electroded with a circuit between the electrodes, which can be switched on or off. Two cases of open and shorted electrodes (short circuit and open circuit) will be considered. Finally, a finite element model will be used to compare the results with an exact solution. The study uses ABAQUS (v.6.7) software to derive the finite element model of the ceramic rod.
Abstract: The purpose of present paper was to investigate
perceptions of Korean secondary school students about social issues
related to biological sciences. Twenty issues were selected based on
topics of articles in the newspaper from 2005 to 2010. The issues were
categorized into biotechnology, health-disease and environment
domains. Subjects were 541 high school students (male 253 and
female 288). On the survey, students were asked to answer on 5-point
Lickert scales how they thought of the effect of biological phenomena
or events related to biological issues on the individual life and the
society. They perceived that the biological issues would be more
effectible on the society than on the individual life. Female students
had a little more perceptions than males.
Abstract: In recent years image watermarking has become an
important research area in data security, confidentiality and image
integrity. Many watermarking techniques were proposed for medical
images. However, medical images, unlike most of images, require
extreme care when embedding additional data within them because
the additional information must not affect the image quality and
readability. Also the medical records, electronic or not, are linked to
the medical secrecy, for that reason, the records must be confidential.
To fulfill those requirements, this paper presents a lossless
watermarking scheme for DICOM images. The proposed a fragile
scheme combines two reversible techniques based on difference
expansion for patient's data hiding and protecting the region of
interest (ROI) with tamper detection and recovery capability.
Patient's data are embedded into ROI, while recovery data are
embedded into region of non-interest (RONI). The experimental
results show that the original image can be exactly extracted from the
watermarked one in case of no tampering. In case of tampered ROI,
tampered area can be localized and recovered with a high quality
version of the original area.
Abstract: Case based reasoning (CBR) methodology presents a foundation for a new technology of building intelligent computeraided diagnoses systems. This Technology directly addresses the problems found in the traditional Artificial Intelligence (AI) techniques, e.g. the problems of knowledge acquisition, remembering, robust and maintenance. This paper discusses the CBR methodology, the research issues and technical aspects of implementing intelligent medical diagnoses systems. Successful applications in cancer and heart diseases developed by Medical Informatics Research Group at Ain Shams University are also discussed.
Abstract: All Text processing systems allow their users to
search a pattern of string from a given text. String matching is
fundamental to database and text processing applications. Every text
editor must contain a mechanism to search the current document for
arbitrary strings. Spelling checkers scan an input text for words in the
dictionary and reject any strings that do not match. We store our
information in data bases so that later on we can retrieve the same
and this retrieval can be done by using various string matching
algorithms. This paper is describing a new string matching algorithm
for various applications. A new algorithm has been designed with the
help of Rabin Karp Matcher, to improve string matching process.
Abstract: This work is devoted to the calculation of the
undulatory parameters and the study of the influence thickness of
electrical sheet on overvoltage compared to the carcass and between
whorls (sections) of the asynchronous motors supplied with PWM
converters.
Abstract: A given polynomial, possibly with multiple roots, is
factored into several lower-degree distinct-root polynomials with
natural-order-integer powers. All the roots, including multiplicities,
of the original polynomial may be obtained by solving these lowerdegree
distinct-root polynomials, instead of the original high-degree
multiple-root polynomial directly.
The approach requires polynomial Greatest Common Divisor
(GCD) computation. The very simple and effective process, “Monic
polynomial subtractions" converted trickily from “Longhand
polynomial divisions" of Euclidean algorithm is employed. It
requires only simple elementary arithmetic operations without any
advanced mathematics.
Amazingly, the derived routine gives the expected results for the
test polynomials of very high degree, such as p( x) =(x+1)1000.
Abstract: This paper gives an overview of the mapping
mechanism of SEAM-a methodology for the automatic generation of
knowledge models and its mapping onto Java codes. It discusses the
rules that will be used to map the different components in the
knowledge model automatically onto Java classes, properties and
methods. The aim of developing this mechanism is to help in the
creation of a prototype which will be used to validate the knowledge
model which has been generated automatically. It will also help to
link the modeling phase with the implementation phase as existing
knowledge engineering methodologies do not provide for proper
guidelines for the transition from the knowledge modeling phase to
development phase. This will decrease the development overheads
associated to the development of Knowledge Based Systems.
Abstract: Bioleaching of spent catalyst using moderate thermophilic chemolithotrophic acidophiles in growth medium without Fe source was investigated with two different pulp densities and three different size fractions. All the experiments were conducted on shake flasks at a temperature of 65 °C. The leaching yield of Ni and Al was found to be promising with very high leaching yield of 92-96% followed by Al as 41-76%, which means both Ni and Al leaching were favored by the moderate thermophilic bioleaching compared to the mesophilic bioleaching. The acid consumption was comparatively higher for the 10% pulp density experiments. Comparatively minimal difference in the leaching yield with different size fractions and different pulp densities show no requirement of grinding and using low pulp density less than 10%. This process would rather be economical as well as eco-friendly process for future optimization of the recovery of metal values from spent catalyst.
Abstract: In this paper the use of sequential machines for recognizing actions taken by the objects detected by a general tracking algorithm is proposed. The system may deal with the uncertainty inherent in medium-level vision data. For this purpose, fuzzification of input data is performed. Besides, this transformation allows to manage data independently of the tracking application selected and enables adding characteristics of the analyzed scenario. The representation of actions by means of an automaton and the generation of the input symbols for finite automaton depending on the object and action compared are described. The output of the comparison process between an object and an action is a numerical value that represents the membership of the object to the action. This value is computed depending on how similar the object and the action are. The work concludes with the application of the proposed technique to identify the behavior of vehicles in road traffic scenes.
Abstract: Since water resources of desert Naein City are very
limited, a approach which saves water resources and meanwhile
meets the needs of the greenspace for water is to use city-s sewage
wastewater. Proper treatment of Naein-s sewage up to the standards
required for green space uses may solve some of the problems of
green space development of the city. The present paper closely
examines available statistics and information associated with city-s
sewage system, and determines complementary stages of sewage
treatment facilities of the city. In the present paper, population, per
capita water use, and required discharge for various greenspace
pieces including different plants are calculated. Moreover, in order to
facilitate the application of water resources, a Crude water
distribution network apart from drinking water distribution network is
designed, and a plan for mixing municipal wells- water with sewage
wastewater in proposed mixing tanks is suggested. Hence, following
greenspace irrigation reform and complementary plan, per capita
greenspace of the city will be increased from current amount of 13.2
square meters to 32 square meters.
Abstract: Multiport diffusers are the effective engineering
devices installed at the modern marine outfalls for the steady
discharge of effluent streams from the coastal plants, such as
municipal sewage treatment, thermal power generation and seawater
desalination. A mathematical model using a two-dimensional
advection-diffusion equation based on a flat seabed and incorporating
the effect of a coastal tidal current is developed to calculate the
compounded concentration following discharges of desalination
brine from a sea outfall with multiport diffusers. The analytical
solutions are computed graphically to illustrate the merging of
multiple brine plumes in shallow coastal waters, and further
approximation will be made to the maximum shoreline's
concentration to formulate dilution of a multiport diffuser discharge.
Abstract: Reinforced Concrete (RC) structures strengthened
with fiber reinforced polymer (FRP) lack in thermal resistance under
elevated temperatures in the event of fire. This phenomenon led to
the lining of strengthened concrete with thin high performance
cementitious composites (THPCC) to protect the substrate against
elevated temperature. Elevated temperature effects on THPCC, based
on different cementitious materials have been studied in the past but
high-alumina cement (HAC)-based THPCC have not been well
characterized. This research study will focus on the THPCC based on
HAC replaced by 60%, 70%, 80% and 85% of ground granulated
blast furnace slag (GGBS). Samples were evaluated by the
measurement of their mechanical strength (28 & 56 days of curing)
after exposed to 400°C, 600°C and 28°C of room temperature for
comparison and corroborated by their microstructure study. Results
showed that among all mixtures, the mix containing only HAC
showed the highest compressive strength after exposed to 600°C as
compared to other mixtures. However, the tensile strength of THPCC
made of HAC and 60% GGBS content was comparable to the
THPCC with HAC only after exposed to 600°C. Field emission
scanning electron microscopy (FESEM) images of THPCC
accompanying Energy Dispersive X-ray (EDX) microanalysis
revealed that the microstructure deteriorated considerably after
exposure to elevated temperatures which led to the decrease in
mechanical strength.
Abstract: Alpfa-fetoprotein and its fragments may be an important vehicle for targeted delivery of radionuclides to the tumor. We investigated the effect of conditions on the labeling of biologically active synthetic peptide based on the (F-afp) with technetium-99m. The influence of the nature of the buffer solution, pH, concentration of reductant, concentration of the peptide and the reaction temperature on the yield of labeling was examined. As a result, the following optimal conditions for labeling of (F-afp) are found: pH 8.5 (phosphate and bicarbonate buffers) and pH from 1.7 to 7.0 (citrate buffer). The reaction proceeds with sufficient yield at room temperature for 30 min at the concentration of SnCl2 and (Fafp) (F-afp) is to be less than 10 mkg/ml and 25 mkg/ml, respectively. Investigations of the test drug accumulation in the tumor cells of human breast cancer were carried out. Results can be assumed that the in vivo study of the (F-afp) in experimental tumor lesions will show concentrations sufficient for imaging these lesions by SPECT.
Abstract: In this paper authors presented the research of textile electroconductive materials, which can be used to construction
sensory textronic shirt to breath frequency measurement.
The full paper also will present results of measurements carried
out on unique measurement stands.
Abstract: One of the best ways for achievement of conventional
vehicle changing to hybrid case is trustworthy simulation result and
using of driving realities. For this object, in this paper, at first sevendegree-
of-freedom dynamical model of vehicle will be shown. Then
by using of statically model of engine, gear box, clutch, differential,
electrical machine and battery, the hybrid automobile modeling will
be down and forward simulation of vehicle for pedals to wheels
power transformation will be obtained. Then by design of a fuzzy
controller and using the proper rule base, fuel economy and
regenerative braking will be marked. Finally a series of
MATLAB/SIMULINK simulation results will be proved the
effectiveness of proposed structure.
Abstract: We investigate efficient spreading codes for transmitter based techniques of code division multiple access (CDMA) systems. The channel is considered to be known at the transmitter which is usual in a time division duplex (TDD) system where the channel is assumed to be the same on uplink and downlink. For such a TDD/CDMA system, both bitwise and blockwise multiuser transmission schemes are taken up where complexity is transferred to the transmitter side so that the receiver has minimum complexity. Different spreading codes are considered at the transmitter to spread the signal efficiently over the entire spectrum. The bit error rate (BER) curves portray the efficiency of the codes in presence of multiple access interference (MAI) as well as inter symbol interference (ISI).
Abstract: As the web continues to grow exponentially, the idea
of crawling the entire web on a regular basis becomes less and less
feasible, so the need to include information on specific domain,
domain-specific search engines was proposed. As more information
becomes available on the World Wide Web, it becomes more difficult
to provide effective search tools for information access. Today,
people access web information through two main kinds of search
interfaces: Browsers (clicking and following hyperlinks) and Query
Engines (queries in the form of a set of keywords showing the topic
of interest) [2]. Better support is needed for expressing one's
information need and returning high quality search results by web
search tools. There appears to be a need for systems that do reasoning
under uncertainty and are flexible enough to recover from the
contradictions, inconsistencies, and irregularities that such reasoning
involves. In a multi-view problem, the features of the domain can be
partitioned into disjoint subsets (views) that are sufficient to learn the
target concept. Semi-supervised, multi-view algorithms, which
reduce the amount of labeled data required for learning, rely on the
assumptions that the views are compatible and uncorrelated. This
paper describes the use of semi-structured machine learning approach
with Active learning for the “Domain Specific Search Engines". A
domain-specific search engine is “An information access system that
allows access to all the information on the web that is relevant to a
particular domain. The proposed work shows that with the help of
this approach relevant data can be extracted with the minimum
queries fired by the user. It requires small number of labeled data and
pool of unlabelled data on which the learning algorithm is applied to
extract the required data.