Abstract: General requirements for knowledge representation in
the form of logic rules, applicable to design and control of industrial
processes, are formulated. Characteristic behavior of decision trees
(DTs) and rough sets theory (RST) in rules extraction from recorded
data is discussed and illustrated with simple examples. The
significance of the models- drawbacks was evaluated, using
simulated and industrial data sets. It is concluded that performance of
DTs may be considerably poorer in several important aspects,
compared to RST, particularly when not only a characterization of a
problem is required, but also detailed and precise rules are needed,
according to actual, specific problems to be solved.
Abstract: Much research into handwritten Thai character
recognition have been proposed, such as comparing heads of
characters, Fuzzy logic and structure trees, etc. This paper presents a
system of handwritten Thai character recognition, which is based on
the Ant-minor algorithm (data mining based on Ant colony
optimization). Zoning is initially used to determine each character.
Then three distinct features (also called attributes) of each character
in each zone are extracted. The attributes are Head zone, End point,
and Feature code. All attributes are used for construct the
classification rules by an Ant-miner algorithm in order to classify
112 Thai characters. For this experiment, the Ant-miner algorithm is
adapted, with a small change to increase the recognition rate. The
result of this experiment is a 97% recognition rate of the training set
(11200 characters) and 82.7% recognition rate of unseen data test
(22400 characters).
Abstract: Champs Bourcin black grape originated from
Aquitaine, France and planted in Sapa, Lao cai provice, exhibited
high total acidity (11.72 g/L). After 9 days of alcoholic fermentation
at 25oC using Saccharomyces cerevisiae UP3OY5 strain, the ethanol
concentration of wine was 11.5% v/v, however the sharp sour taste of
wine has been found. The malolactic fermentation (MLF) was carried
out by Oenococcus oeni ATCCBAA-1163 strain which had been preadapted
to acid (pH 3-4) and ethanol (8-12%v/v) conditions. We
obtained the highest vivability (83.2%) upon malolactic fermentation
after 5 days at 22oC with early stationary phase O. oeni cells preadapted
to pH 3.5 and 8% v/v ethanol in MRS medium. The malic
acid content in wine was decreased from 5.82 g/L to 0.02 g/L after
MLF (21 days at 22oC). The sensory quality of wine was
significantly improved.
Abstract: The aim of this in vitro study was to evaluate the possible interference of a Nectandra membranacea extract (i) on the labeling of blood cells (BC), (ii) on the labeling process of BC and plasma (P) proteins with technetium-99m (Tc-99m) and (iii) on the morphology of red blood cells (RBC). Blood samples were incubated with a Nectandra membranacea crude extract, stannous chloride, Tc- 99m (sodium pertechnetate) was added, and soluble (SF) and insoluble (IF) fractions were isolated. Morphometry studies were performed with blood samples incubated with Nectandra membranacea extract. The results show that the Nectandra membranacea extract does not promote significant alteration of the labeling of BC, IF-P and IF-BC. The Nectandra membranacea extract was able to alter the erythrocyte membrane morphology, but these morphological changes were not capable to interfere on the labeling of blood constituents with Tc-99m.
Abstract: Bovine viral diarrhea virus (BVDV) can cause lifelong
persistent infection. One reason for the phenomena is attributed to
BVDV infection to placenta tissue. However the mechanisms that
BVDV invades into placenta tissue remain unclear. To clarify the
molecular mechanisms, we investigated the possible means that
BVDV entered into bovine trophoblast cells (TPC). Yeast two-hybrid
system was used to identify proteins extracted from TPC, which
interact with BVDV envelope glycoprotein E2. A PGbkt7-E2 yeast
expression vector and TPC cDNA library were constructed. Through
two rounds of screening, three positive clones were identified.
Sequencing analysis indicated that all the three positive clones
encoded the same protein clathrin. Physical interaction between
clathrin and BVDV E2 protein was further confirmed by
coimmunoprecipitation experiments. This result suggested that the
clathrin might play a critical role in the process of BVDV entry into
placenta tissue and might be a novel antiviral target for preventing
BVDV infection.
Abstract: The objective of this paper was to designing a
ventilation system to enhance the performance of roof solar collector
(RSC) for reducing heat accumulation inside the house. The RSC has
1.8 m2 surface area made of CPAC monier roof tiles on the upper part
and gypsum board on the lower part. The space between CPAC
monier and gypsum board was fixed at 14 cm.
Ventilation system of modified roof solar collector (modified
RSC) consists of 9 tubes of 0.15m diameter and installed in the
lower part of RSC. Experimental result showed that the temperature
of the room, and attic temperature. The average temperature
reduction of room of house used modified RSC is about 2oC. and the
percentage of room temperature reduction varied between 0 to 10%.
Therefore, modified RSC is an interesting option in the sense that it
promotes solar energy and conserve energy.
Abstract: The performance of adaptive beamforming degrades
substantially in the presence of steering vector mismatches. This
degradation is especially severe in the near-field, for the
3-dimensional source location is more difficult to estimate than the
2-dimensional direction of arrival in far-field cases. As a solution, a
novel approach of near-field robust adaptive beamforming (RABF) is
proposed in this paper. It is a natural extension of the traditional
far-field RABF and belongs to the class of diagonal loading
approaches, with the loading level determined based on worst-case
performance optimization. However, different from the methods
solving the optimal loading by iteration, it suggests here a simple
closed-form solution after some approximations, and consequently,
the optimal weight vector can be expressed in a closed form. Besides
simplicity and low computational cost, the proposed approach reveals
how different factors affect the optimal loading as well as the weight
vector. Its excellent performance in the near-field is confirmed via a
number of numerical examples.
Abstract: Long term rainfall analysis and prediction is a
challenging task especially in the modern world where the impact of
global warming is creating complications in environmental issues.
These factors which are data intensive require high performance
computational modeling for accurate prediction. This research paper
describes a prototype which is designed and developed on grid
environment using a number of coupled software infrastructural
building blocks. This grid enabled system provides the demanding
computational power, efficiency, resources, user-friendly interface,
secured job submission and high throughput. The results obtained
using sequential execution and grid enabled execution shows that
computational performance has enhanced among 36% to 75%, for
decade of climate parameters. Large variation in performance can be
attributed to varying degree of computational resources available for
job execution.
Grid Computing enables the dynamic runtime selection, sharing
and aggregation of distributed and autonomous resources which plays
an important role not only in business, but also in scientific
implications and social surroundings. This research paper attempts to
explore the grid enabled computing capabilities on weather indices
from HOAPS data for climate impact modeling and change
detection.
Abstract: An end-member selection method for spectral unmixing that is based on Particle Swarm Optimization (PSO) is developed in this paper. The algorithm uses the K-means clustering algorithm and a method of dynamic selection of end-members subsets to find the appropriate set of end-members for a given set of multispectral images. The proposed algorithm has been successfully applied to test image sets from various platforms such as LANDSAT 5 MSS and NOAA's AVHRR. The experimental results of the proposed algorithm are encouraging. The influence of different values of the algorithm control parameters on performance is studied. Furthermore, the performance of different versions of PSO is also investigated.
Abstract: Enzymatic saccharification of biomass for reducing
sugar production is one of the crucial processes in biofuel production
through biochemical conversion. In this study, enzymatic
saccharification of dilute potassium hydroxide (KOH) pre-treated
Tetraselmis suecica biomass was carried out by using cellulase
enzyme obtained from Trichoderma longibrachiatum. Initially, the
pre-treatment conditions were optimised by changing alkali reagent
concentration, retention time for reaction, and temperature. The T.
suecica biomass after pre-treatment was also characterized using
Fourier Transform Infrared Spectra and Scanning Electron
Microscope. These analyses revealed that the functional group such
as acetyl and hydroxyl groups, structure and surface of T. suecica
biomass were changed through pre-treatment, which is favourable for
enzymatic saccharification process. Comparison of enzymatic
saccharification of untreated and pre-treated microalgal biomass
indicated that higher level of reducing sugar can be obtained from
pre-treated T. suecica. Enzymatic saccharification of pre-treated T.
suecica biomass was optimised by changing temperature, pH, and
enzyme concentration to solid ratio ([E]/[S]). Highest conversion of
carbohydrate into reducing sugar of 95% amounted to reducing sugar
yield of 20 (wt%) from pre-treated T. suecica was obtained from
saccharification, at temperature: 40°C, pH: 4.5 and [E]/[S] of 0.1
after 72 h of incubation. Hydrolysate obtained from enzymatic
saccharification of pretreated T. suecica biomass was further
fermented into biobutanol using Clostridium saccharoperbutyliticum
as biocatalyst. The results from this study demonstrate a positive
prospect of application of dilute alkaline pre-treatment to enhance
enzymatic saccharification and biobutanol production from
microalgal biomass.
Abstract: The Mobile Ad-hoc Network (MANET) is a collection of self-configuring and rapidly deployed mobile nodes (routers) without any central infrastructure. Routing is one of the potential issues. Many routing protocols are reported but it is difficult to decide which one is best in all scenarios. In this paper on demand routing protocols DSR and DYMO based on IEEE 802.11 DCF MAC protocol are examined and characteristic summary of these routing protocols is presented. Their performance is analyzed and compared on performance measuring metrics throughput, dropped packets due to non availability of routes, duplicate RREQ generated for route discovery and normalized routing load by varying CBR data traffic load using QualNet 5.0.2 network simulator.
Abstract: The objective of this research was to study factors,
which were affected on surface roughness in high speed milling of
hardened tool steel. Material used in the experiment was tool steel JIS
SKD 61 that hardened on 60 ±2 HRC. Full factorial experimental
design was conducted on 3 factors and 3 levels (3
3
designs) with 2
replications. Factors were consisted of cutting speed, feed rate, and
depth of cut. The results showed that influenced factor affected to
surface roughness was cutting speed, feed rate and depth of cut which
showed statistical significant. Higher cutting speed would cause on
better surface quality. On the other hand, higher feed rate would cause
on poorer surface quality. Interaction of factor was found that cutting
speed and depth of cut were significantly to surface quality. The
interaction of high cutting speed associated with low depth of cut
affected to better surface quality than low cutting speed and high depth
of cut.
Abstract: Extraction of lactic acid from aqueous solution using n-butanol as an extractant was studied. Effect of mixing time, pH of the aqueous solution, initial lactic acid concentration, and volume ratio between the organic and the aqueous phase were investigated. Distribution coefficient and degree of lactic acid extraction was found to increase when the pH of aqueous solution was decreased. The pH Effect was substantially pronounced at pH of the aqueous solution less than 1. Initial lactic acid concentration and organic-toaqueous volume ratio appeared to have positive effect on the distribution coefficient and the degree of extraction. Due to the nature of n-butanol that is partially miscible in water, incorporation of aqueous solution into organic phase was observed in the extraction with large organic-to-aqueous volume ratio.
Abstract: With the advent of inexpensive 32 bit floating point digital signal processor-s availability in market, many computationally intensive algorithms such as Kalman filter becomes feasible to implement in real time. Dynamic simulation of a self excited DC motor using second order state variable model and implementation of Kalman Filter in a floating point DSP TMS320C6713 is presented in this paper with an objective to introduce and implement such an algorithm, for beginners. A fractional hp DC motor is simulated in both Matlab® and DSP and the results are included. A step by step approach for simulation of DC motor in Matlab® and “C" routines in CC Studio® is also given. CC studio® project file details and environmental setting requirements are addressed. This tutorial can be used with 6713 DSK, which is based on floating point DSP and CC Studio either in hardware mode or in simulation mode.
Abstract: We present a system that finds road boundaries and
constructs the virtual lane based on fusion data from a laser and a
monocular sensor, and detects forward vehicle position even in no lane
markers or bad environmental conditions. When the road environment
is dark or a lot of vehicles are parked on the both sides of the road, it is
difficult to detect lane and road boundary. For this reason we use
fusion of laser and vision sensor to extract road boundary to acquire
three dimensional data. We use parabolic road model to calculate road
boundaries which is based on vehicle and sensors state parameters and
construct virtual lane. And then we distinguish vehicle position in each
lane.
Abstract: The aim of this study was to investigate the
environmental conservation behavior of the Applied Health Science
students of Suranaree University of Technology, a green and clean
university. The sample group was 184 Applied Health Science
students (medical, nursing, and public health). A questionnaire was
used to collect information.
The result of the study found that the students had more negative
than positive behaviors towards energy, water, and forest
conservation. This result can be used as basic information for
designing long-term behavior modification activities or research
projects on environmental conservation. Thus Applied Health
Science students will be encouraged to be conscious and also be a
good example of environmental conservation behavior.
Abstract: This study reports the implementation of Good
Manufacturing Practice (GMP) in a polycarbonate film processing
plant. The implementation of GMP took place with the creation of a
multidisciplinary team. It was carried out in four steps: conduct gap
assessment, create gap closure plan, close gaps, and follow up the
GMP implementation. The basis for the gap assessment is the
guideline for GMP for plastic materials and articles intended for Food
Contact Material (FCM), which was edited by Plastic Europe. The
effective results of the GMP implementation in this study showed
100% completion of gap assessment. The key success factors for
implementing GMP in production process are the commitment,
intention and support of top management.
Abstract: The present study was designed to investigate the
cardio protective role of chronic oral administration of alcoholic
extract of Terminalia arjuna in in-vivo ischemic reperfusion injury
and the induction of HSP72. Rabbits, divided into three groups, and
were administered with the alcoholic extract of the bark powder of
Terminalia arjuna (TAAE) by oral gavage [6.75mg/kg: (T1) and
9.75mg/kg: (T2), 6 days /week for 12 weeks]. In open-chest
Ketamine pentobarbitone anaesthetized rabbits, the left anterior
descending coronary artery was occluded for 15 min of ischemia
followed by 60 min of reperfusion. In the vehicle-treated group,
ischemic-reperfusion injury (IRI) was evidenced by depression of
global hemodynamic function (MAP, HR, LVEDP, peak LV (+) & (-
) (dP/dt) along with depletion of HEP compounds. Oxidative stress
in IRI was evidenced by, raised levels of myocardial TBARS and
depletion of endogenous myocardial antioxidants GSH, SOD and
catalase. Western blot analysis showed a single band corresponding
to 72 kDa in homogenates of hearts from rabbits treated with both the
doses. In the alcoholic extract of the bark powder of Terminalia
arjuna treatment groups, both the doses had better recovery of
myocardial hemodynamic function, with significant reduction in
TBARS, and rise in SOD, GSH, catalase were observed. The results
of the present study suggest that the alcoholic extract of the bark
powder of Terminalia arjuna in rabbit induces myocardial HSP 72
and augments myocardial endogenous antioxidants, without causing
any cellular injury and offered better cardioprotection against
oxidative stress associated with myocardial IR injury.
Abstract: A key to success of high quality software development
is to define valid and feasible requirements specification. We have
proposed a method of model-driven requirements analysis using
Unified Modeling Language (UML). The main feature of our method
is to automatically generate a Web user interface mock-up from UML
requirements analysis model so that we can confirm validity of
input/output data for each page and page transition on the system by
directly operating the mock-up. This paper proposes a support method
to check the validity of a data life cycle by using a model checking tool
“UPPAAL" focusing on CRUD (Create, Read, Update and Delete).
Exhaustive checking improves the quality of requirements analysis
model which are validated by the customers through automatically
generated mock-up. The effectiveness of our method is discussed by a
case study of requirements modeling of two small projects which are a
library management system and a supportive sales system for text
books in a university.
Abstract: In ad hoc networks, the main issue about designing of protocols is quality of service, so that in wireless sensor networks the main constraint in designing protocols is limited energy of sensors. In fact, protocols which minimize the power consumption in sensors are more considered in wireless sensor networks. One approach of reducing energy consumption in wireless sensor networks is to reduce the number of packages that are transmitted in network. The technique of collecting data that combines related data and prevent transmission of additional packages in network can be effective in the reducing of transmitted packages- number. According to this fact that information processing consumes less power than information transmitting, Data Aggregation has great importance and because of this fact this technique is used in many protocols [5]. One of the Data Aggregation techniques is to use Data Aggregation tree. But finding one optimum Data Aggregation tree to collect data in networks with one sink is a NP-hard problem. In the Data Aggregation technique, related information packages are combined in intermediate nodes and form one package. So the number of packages which are transmitted in network reduces and therefore, less energy will be consumed that at last results in improvement of longevity of network. Heuristic methods are used in order to solve the NP-hard problem that one of these optimization methods is to solve Simulated Annealing problems. In this article, we will propose new method in order to build data collection tree in wireless sensor networks by using Simulated Annealing algorithm and we will evaluate its efficiency whit Genetic Algorithm.