Abstract: The aim of this study was to screen for
microorganism that able to utilize 3-N-trimethylamino-1-propanol
(homocholine) as a sole source of carbon and nitrogen. The aerobic
degradation of homocholine has been found by a gram-positive
Rhodococcus sp. bacterium isolated from soil. The isolate was
identified as Rhodococcus sp. strain A4 based on the phenotypic
features, physiologic and biochemical characteristics, and
phylogenetic analysis. The cells of the isolated strain grown on both
basal-TMAP and nutrient agar medium displayed elementary
branching mycelia fragmented into irregular rod and coccoid
elements. Comparative 16S rDNA sequencing studies indicated that
the strain A4 falls into the Rhodococcus erythropolis subclade and
forms a monophyletic group with the type-strains of R. opacus, and
R. wratislaviensis. Metabolites analysis by capillary electrophoresis,
fast atom bombardment-mass spectrometry, and gas
chromatography- mass spectrometry, showed trimethylamine (TMA)
as the major metabolite beside β-alanine betaine and
trimethylaminopropionaldehyde. Therefore, the possible degradation
pathway of trimethylamino propanol in the isolated strain is through
consequence oxidation of alcohol group (-OH) to aldehyde (-CHO)
and acid (-COOH), and thereafter the cleavage of β-alanine betaine
C-N bonds yielded trimethylamine and alkyl chain.
Abstract: In the last decades, the problem of perforation
damage has been considered as the major factor for the
reduction of oil productivity. Underbalance perforation is
considered as one of the best means to minimize or overcome
this problem. By maintaining wellbore pressure lower than
formation pressure, perforation damage could be minimize or
eliminated. This can be achieved by the use of nontraditional
lightweight completion fluid. This paper presents the effect of
natural clay in formulating nontraditional completion fluid to
ensure successful perforation job and increase of production
rate. Natural clay is used as homogenizing agent to create a
stable and non-damaging low-density completion fluid.
Results indicate that the addition of natural clay dramatically
increase the stability of the final fluids. In addition, field test
has shown that the application of nontraditional completion
fluid increases oil production by three folds.
Abstract: Distributed Computing Systems are usually considered the most suitable model for practical solutions of many parallel algorithms. In this paper an enhanced distributed system is presented to improve the time complexity of Binary Indexed Trees (BIT). The proposed system uses multi-uniform processors with identical architectures and a specially designed distributed memory system. The analysis of this system has shown that it has reduced the time complexity of the read query to O(Log(Log(N))), and the update query to constant complexity, while the naive solution has a time complexity of O(Log(N)) for both queries. The system was implemented and simulated using VHDL and Verilog Hardware Description Languages, with xilinx ISE 10.1, as the development environment and ModelSim 6.1c, similarly as the simulation tool. The simulation has shown that the overhead resulting by the wiring and communication between the system fragments could be fairly neglected, which makes it applicable to practically reach the maximum speed up offered by the proposed model.
Abstract: The main objective of this study was to remove and recover Ni, Cu and Fe from a mixed metal system using sodium hypophosphite as a reducing agent and nickel powder as seeding material. The metal systems studied consisted of Ni-Cu, Ni-Fe and Ni-Cu-Fe solutions. A 5 L batch reactor was used to conduct experiments where 100 mg/l of each respective metal was used. It was found that the metals were reduced to their elemental form with removal efficiencies of over 80%. The removal efficiency decreased in the order Fe>Ni>Cu. The metal powder obtained contained between 97-99% Ni and was almost spherical and porous. Size enlargement by aggregation was the dominant particulate process.
Abstract: The full length mitochondrial small subunit ribosomal
(mt-rns) gene has been characterized for Ophiostoma novo-ulmi
subspecies americana. The gene was also characterized for
Ophiostoma ulmi and a group II intron was noted in the mt-rns gene
of O. ulmi. The insertion in the mt-rns gene is at position S952 and it
is a group IIB1 intron that encodes a double motif LAGLIDADG
homing endonuclease from an open reading frame located within a
loop of domain III. Secondary structure models for the mt-rns RNA
of O. novo-ulmi subsp. americana and O. ulmi were generated to
place the intron within the context of the ribosomal RNA. The in vivo
splicing of the O.ul-mS952 group II intron was confirmed with
reverse transcription-PCR. A survey of 182 strains of Dutch Elm
Diseases causing agents showed that the mS952 intron was absent in
what is considered to be the more aggressive species O. novo-ulmi
but present in strains of the less aggressive O. ulmi. This observation
suggests that the O.ul-mS952 intron can be used as a PCR-based
molecular marker to discriminate between O. ulmi and O. novo-ulmi
subsp. americana.
Abstract: This paper deals with the synthesis of fuzzy controller
applied to a permanent magnet synchronous machine (PMSM) with a
guaranteed H∞ performance. To design this fuzzy controller,
nonlinear model of the PMSM is approximated by Takagi-Sugeno
fuzzy model (T-S fuzzy model), then the so-called parallel
distributed compensation (PDC) is employed. Next, we derive the
property of the H∞ norm. The latter is cast in terms of linear matrix
inequalities (LMI-s) while minimizing the H∞ norm of the transfer
function between the disturbance and the error ( ) ev T . The
experimental and simulations results were conducted on a permanent
magnet synchronous machine to illustrate the effects of the fuzzy
modelling and the controller design via the PDC.
Abstract: In the present paper, an improved initial value
numerical technique is presented to analyze the free vibration of
symmetrically laminated rectangular plate. A combination of the
initial value method (IV) and the finite differences (FD) devices is
utilized to develop the present (IVFD) technique. The achieved
technique is applied to the equation of motion of vibrating laminated
rectangular plate under various types of boundary conditions. Three
common types of laminated symmetrically cross-ply, orthotropic and
isotropic plates are analyzed here. The convergence and accuracy of
the presented Initial Value-Finite Differences (IVFD) technique have
been examined. Also, the merits and validity of improved technique
are satisfied via comparing the obtained results with those available
in literature indicating good agreements.
Abstract: Nowadays, people are going more and more mobile, both in terms of devices and associated applications. Moreover, services that these devices are offering are getting wider and much more complex. Even though actual handheld devices have considerable computing power, their contexts of utilization are different. These contexts are affected by the availability of connection, high latency of wireless networks, battery life, size of the screen, on-screen or hard keyboard, etc. Consequently, development of mobile applications and their associated mobile Web services, if any, should follow a concise methodology so they will provide a high Quality of Service. The aim of this paper is to highlight and discuss main issues to consider when developing mobile applications and mobile Web services and then propose a framework that leads developers through different steps and modules toward development of efficient and secure mobile applications. First, different challenges in developing such applications are elicited and deeply discussed. Second, a development framework is presented with different modules addressing each of these challenges. Third, the paper presents an example of a mobile application, Eivom Cinema Guide, which benefits from following our development framework.
Abstract: This study was conducted to investigate the incidence
of pathogenic bacteria: Salmonella, Shigella, Escherichia coli O157
and Staphylococcus aureus in cakes and tarts collected from thirtyfive
confectionery producing and selling premises located within
Tripoli city, Libya. The results revealed an incidence of S. aureus
with 94.4 and 48.0 %, E. coli O157 with 14.7 and 4.0 % and Salmonella
sp. with 5.9 and 8.0 % in cakes and tarts samples respectively;
while Shigella was not detected in all samples. In order to determine
the source of these pathogenic bacteria, cotton swabs were taken
from the hands of workers on the production line, the surfaces of
preparation tables and cream whipping instruments. The results
showed that the cotton swabs obtained from the hands of workers
contained S. aureus and Salmonella sp. with an incidence of 42.9 and
2.9 %, the cotton swabs obtained from the surfaces of preparation
tables 22.9 and 2.9 % and the cotton swabs obtained from the cream
whipping instruments 14.3 and 0.0 % respectively; while E. coli
O157 and Shigella sp. were not detected in all swabs. Additionally,
other bacteria were isolated from the hands of workers and the Surfaces
of producing equipments included: Aeromonas sp., Pseudomonas
sp., E. coli, Klebsiella sp., Enterobacter sp., Citrobacter sp.,
Proteus sp., Serratia sp. and Acinetobacter sp. These results indicate
that some of the cakes and tarts might pose threat to consumer's
health. Meanwhile, occurrences of pathogenic bacteria on the hands
of those who are working in production line and the surfaces of
equipments reflect poor hygienic practices at most confectionery
premises examined in this study. Thus, firm and continuous surveillance
of these premises is needed to insure the consumer's health and
safety.
Abstract: A model predictive controller based on recursive learning is proposed. In this SISO adaptive controller, a model is automatically updated using simple recursive equations. The identified models are then stored in the memory to be re-used in the future. The decision for model update is taken based on a new control performance index. The new controller allows the use of simple linear model predictive controllers in the control of nonlinear time varying processes.
Abstract: Finite impulse response (FIR) filters have the advantage of linear phase, guaranteed stability, fewer finite precision errors, and efficient implementation. In contrast, they have a major disadvantage of high order need (more coefficients) than IIR counterpart with comparable performance. The high order demand imposes more hardware requirements, arithmetic operations, area usage, and power consumption when designing and fabricating the filter. Therefore, minimizing or reducing these parameters, is a major goal or target in digital filter design task. This paper presents an algorithm proposed for modifying values and the number of non-zero coefficients used to represent the FIR digital pulse shaping filter response. With this algorithm, the FIR filter frequency and phase response can be represented with a minimum number of non-zero coefficients. Therefore, reducing the arithmetic complexity needed to get the filter output. Consequently, the system characteristic i.e. power consumption, area usage, and processing time are also reduced. The proposed algorithm is more powerful when integrated with multiplierless algorithms such as distributed arithmetic (DA) in designing high order digital FIR filters. Here the DA usage eliminates the need for multipliers when implementing the multiply and accumulate unit (MAC) and the proposed algorithm will reduce the number of adders and addition operations needed through the minimization of the non-zero values coefficients to get the filter output.
Abstract: Day by day technology increases and problems
associated with this technology also increase. Several researches
were carried out to investigate the deployment of such material safely
in geotechnical engineering in particular and civil engineering in
general. However, different types of waste material have such as
cement duct, fly ash and slag been proven to be suitable in several
applications. In this research cement dust mixed with different
percentages of sand will be used in some civil engineering
application as will be explained later in this paper throughout filed
and laboratory test. The used mixer (waste material with sand) prove
high performance, durability to environmental condition, low cost
and high benefits. At higher cement dust ratio, small cement ratio is
valuable for compressive strength and permeability. Also at small
cement dust ratio higher cement ratio is valuable for compressive
strength.
Abstract: augmented reality is a technique used to insert virtual objects in real scenes. One of the most used libraries in the area is the ARToolkit library. It is based on the recognition of the markers that are in the form of squares with a pattern inside. This pattern which is mostly textual is source of confusing. In this paper, we present the results of a classification of Latin characters as a pattern on the ARToolkit markers to know the most distinguishable among them.
Abstract: This paper is introduced a modification to Diffie-
Hellman protocol to be applicable on the decimal numbers, which
they are the numbers between zero and one. For this purpose we
extend the theory of the congruence. The new congruence is over
the set of the real numbers and it is called the “real congruence"
or the “real modulus". We will refer to the existing congruence by
the “integer congruence" or the “integer modulus". This extension
will define new terms and redefine the existing terms. As the
properties and the theorems of the integer modulus are extended as
well. Modified Diffie-Hellman key exchange protocol is produced a
sharing, secure and decimal secret key for the the cryptosystems that
depend on decimal numbers.
Abstract: Support Vector Domain Description (SVDD) is one of the best-known one-class support vector learning methods, in which one tries the strategy of using balls defined on the feature space in order to distinguish a set of normal data from all other possible abnormal objects. As all kernel-based learning algorithms its performance depends heavily on the proper choice of the kernel parameter. This paper proposes a new approach to select kernel's parameter based on maximizing the distance between both gravity centers of normal and abnormal classes, and at the same time minimizing the variance within each class. The performance of the proposed algorithm is evaluated on several benchmarks. The experimental results demonstrate the feasibility and the effectiveness of the presented method.
Abstract: The current study describes a multi-objective optimization technique for positioning of houses in a residential neighborhood. The main task is the placement of residential houses in a favorable configuration satisfying a number of objectives. Solving the house layout problem is a challenging task. It requires an iterative approach to satisfy design requirements (e.g. energy efficiency, skyview, daylight, roads network, visual privacy, and clear access to favorite views). These design requirements vary from one project to another based on location and client preferences. In the Gulf region, the most important socio-cultural factor is the visual privacy in indoor space. Hence, most of the residential houses in this region are surrounded by high fences to provide privacy, which has a direct impact on other requirements (e.g. daylight and direction to favorite views). This investigation introduces a novel technique to optimally locate and orient residential buildings to satisfy a set of design requirements. The developed technique explores the search space for possible solutions. This study considers two dimensional house planning problems. However, it can be extended to solve three dimensional cases.
Abstract: This paper introduces application of multi degree of freedom fuzzy(MDOFF) controller in permanent magnet (PM)drive system. The drive system model is developed for FO control. Simulation of the system is carried out to predict the performance at NL and under load,. The results indicate that application of MDOFF controller is effective for sensorless PM drive system.
Abstract: An actual power plant, which is the power plant of Iron and Steel Factory at Misurata city in Libya , has been modeled using Matlab in order to compare its results to the actual results of the actual cycle. This paper concentrates on two factors:
a- The comparison between exergy losses in the actual cycle and the modeled cycle.
b- The effect of extracting pressure on temperature water at boiler inlet.
Closed heat exchangers used in this plant have been substituted by open heat exchangers in the current study of the modeled power plant and the required changes in the pressure have been considered. In the following investigation the two points mentioned above are taken in consideration.
Abstract: In the present Jordan hotels scenario, service quality is
a vital competitive policy to keep customer support and build great
base. Hotels are trying to win customer loyalty by providing enhanced
quality services. This paper attempts to examine the impact of tourism
service quality dimension in the Jordanian five star hotels. A total of
322 surveys were administrated to tourists who were staying at three
branches Marriott hotel in Jordan. The results show that dimensions of
service quality such as empathy, reliability, responsiveness and
tangibility significantly predict customer loyalty. Specifically, among
the dimension of tourism service quality, the most significant predictor
of customer loyalty is tangibility. This paper implies that five star
hotels in Jordan should also come forward and try their best to present
better tourism service quality to win back their customers- loyalty.
Abstract: In the present research, a finite element model is
presented to study the geometrical and material nonlinear behavior of
reinforced concrete plane frames considering soil-structure
interaction. The nonlinear behaviors of concrete and reinforcing steel
are considered both in compression and tension up to failure. The
model takes account also for the number, diameter, and distribution
of rebar along every cross section. Soil behavior is taken into
consideration using four different models; namely: linear-, nonlinear
Winkler's model, and linear-, nonlinear continuum model. A
computer program (NARC) is specially developed in order to
perform the analysis. The results achieved by the present model show
good agreement with both theoretical and experimental published
literature. The nonlinear behavior of a rectangular frame resting on
soft soil up to failure using the proposed model is introduced for
demonstration.