Abstract: In this paper we study the boundedness properties of
certain oscillatory integrals with polynomial phase. We obtain sharp
estimates for these oscillatory integrals. By the virtue of these
estimates and extrapolation we obtain Lp boundedness for these
oscillatory integrals under rather weak size conditions on the kernel
function.
Abstract: The private theme parks are gradually surpassing
public-owned scenic areas after many years of development and have
become a mainstream choice for domestic tourists. Previous studies
show that visitors from different backgrounds differ in consumer
behavior and satisfaction factors. An understanding of visitor
satisfaction is therefore of extreme importance to operators of
privately-owned theme parks. Importance-Performance Analysis (IPA)
is used to measure consumer's potential satisfaction with services and
has become a widely used management tool for strength and weakness
analysis for brands, products, services and point of sales. As IPA has
so far not been used to evaluate the visitor satisfaction with
privately-owned theme parks, in this study the IPA method is used to
analyze visitor satisfaction with Janfusun Fancyworld (one of the most
popular private theme parks in Taiwan) and to rank visitor focus and
satisfaction on/in theme park facilities and services. Results of the
analysis provide private theme park operators with an understanding
of user or consumer demands as well as an assessment of the quality of
services currently offered.
Abstract: One of the ubiquitous routines in medical practice is searching through voluminous piles of clinical documents. In this paper we introduce a distributed system to search and exchange clinical documents. Clinical documents are distributed peer-to-peer. Relevant information is found in multiple iterations of cross-searches between the clinical text and its domain encyclopedia.
Abstract: The impact of OO design on software quality
characteristics such as defect density and rework by mean of
experimental validation. Encapsulation, inheritance, polymorphism,
reusability, Data hiding and message-passing are the major attribute
of an Object Oriented system. In order to evaluate the quality of an
Object oriented system the above said attributes can act as indicators.
The metrics are the well known quantifiable approach to express any
attribute. Hence, in this paper we tried to formulate a framework of
metrics representing the attributes of object oriented system.
Empirical Data is collected from three different projects based on
object oriented paradigms to calculate the metrics.
Abstract: The similarity comparison of RNA secondary
structures is important in studying the functions of RNAs. In recent
years, most existing tools represent the secondary structures by
tree-based presentation and calculate the similarity by tree alignment
distance. Different to previous approaches, we propose a new method
based on maximum clique detection algorithm to extract the maximum
common structural elements in compared RNA secondary structures.
A new graph-based similarity measurement and maximum common
subgraph detection procedures for comparing purely RNA secondary
structures is introduced. Given two RNA secondary structures, the
proposed algorithm consists of a process to determine the score of the
structural similarity, followed by comparing vertices labelling, the
labelled edges and the exact degree of each vertex. The proposed
algorithm also consists of a process to extract the common structural
elements between compared secondary structures based on a proposed
maximum clique detection of the problem. This graph-based model
also can work with NC-IUB code to perform the pattern-based
searching. Therefore, it can be used to identify functional RNA motifs
from database or to extract common substructures between complex
RNA secondary structures. We have proved the performance of this
proposed algorithm by experimental results. It provides a new idea of
comparing RNA secondary structures. This tool is helpful to those
who are interested in structural bioinformatics.
Abstract: The paper reports on the results of experimental and
numerical study of nonstationary swirling flow in an isothermal
model of vortex burner. It has been identified that main source of the
instability is related to a precessing vortex core (PVC) phenomenon.
The PVC induced flow pulsation characteristics such as precession
frequency and its variation as a function of flowrate and swirl number
have been explored making use of acoustic probes. Additionally
pressure transducers were used to measure the pressure drops on the
working chamber and across the vortex flow. The experiments have
been included also the mean velocity measurements making use of a
laser-Doppler anemometry. The features of instantaneous flowfield
generated by the PVC were analyzed employing a commercial CFD
code (Star-CCM+) based on Detached Eddy Simulation (DES)
approach. Validity of the numerical code has been checked by
comparison calculated flowfield data with the obtained experimental
results. It has been confirmed particularly that the CFD code applied
correctly reproduces the flow features.
Abstract: Travelling salesman problem (TSP) is a combinational
optimization problem and solution approaches have been applied
many real world problems. Pure TSP assumes the cities to visit are
fixed in time and thus solutions are created to find shortest path
according to these point. But some of the points are canceled to visit
in time. If the problem is not time crucial it is not important to
determine new routing plan but if the points are changing rapidly and
time is necessary do decide a new route plan a new approach should
be applied in such cases. We developed a route plan transfer method
based on transfer learning and we achieved high performance against
determining a new model from scratch in every change.
Abstract: Flat double-layer grid is from category of space structures that are formed from two flat layers connected together with diagonal members. Increased stiffness and better seismic resistance in relation to other space structures are advantages of flat double layer space structures. The objective of this study is assessment and calculation of Behavior factor of flat double layer space structures. With regarding that these structures are used widely but Behavior factor used to design these structures against seismic force is not determined and exact, the necessity of study is obvious. This study is theoretical. In this study we used structures with span length of 16m and 20 m. All connections are pivotal. ANSYS software is used to non-linear analysis of structures.
Abstract: This paper describes the NEAR (Navigating Exhibitions, Annotations and Resources) panel, a novel interactive visualization technique designed to help people navigate and interpret groups of resources, exhibitions and annotations by revealing hidden relations such as similarities and references. NEAR is implemented on A•VI•RE, an extended online information repository. A•VI•RE supports a semi-structured collection of exhibitions containing various resources and annotations. Users are encouraged to contribute, share, annotate and interpret resources in the system by building their own exhibitions and annotations. However, it is hard to navigate smoothly and efficiently in A•VI•RE because of its high capacity and complexity. We present a visual panel that implements new navigation and communication approaches that support discovery of implied relations. By quickly scanning and interacting with NEAR, users can see not only implied relations but also potential connections among different data elements. NEAR was tested by several users in the A•VI•RE system and shown to be a supportive navigation tool. In the paper, we further analyze the design, report the evaluation and consider its usage in other applications.
Abstract: In this paper, we present two new ranking and unranking
algorithms for k-ary trees represented by x-sequences in Gray
code order. These algorithms are based on a gray code generation algorithm
developed by Ahrabian et al.. In mentioned paper, a recursive
backtracking generation algorithm for x-sequences corresponding to
k-ary trees in Gray code was presented. This generation algorithm
is based on Vajnovszki-s algorithm for generating binary trees in
Gray code ordering. Up to our knowledge no ranking and unranking
algorithms were given for x-sequences in this ordering. we present
ranking and unranking algorithms with O(kn2) time complexity for
x-sequences in this Gray code ordering
Abstract: Flood management is one of the important fields in
urban storm water management. Floods are influenced by the
increase of huge storm event, or improper planning of the area. This study mainly provides the flood protection in four stages; planning,
flood event, responses and evaluation. However it is most effective then flood protection is considered in planning/design and
evaluation stages since both stages represent the land development of the area. Structural adjustments are often more reliable than nonstructural
adjustments in providing flood protection, however
structural adjustments are constrained by numerous factors such as
political constraints and cost. Therefore it is important to balance
both adjustments with the situation. The technical decisions provided
will have to be approved by the higher-ups who have the power to
decide on the final solution. Costs however, are the biggest factor in
determining the final decision. Therefore this study recommends
flood protection system should have been integrated and enforces
more in the early stages (planning and design) as part of the storm
water management plan. Factors influencing the technical decisions
provided should be reduced as low as possible to avoid a reduction in
the expected performance of the proposed adjustments.
Abstract: The purpose of the present paper is to study the concept
of fuzzy bi-ideals in ternary semirings. We give some characterizations of fuzzy bi-ideals. Characterizations of regular ternary semirings
are provided.
Abstract: S-boxes (Substitution boxes) are keystones of modern
symmetric cryptosystems (block ciphers, as well as stream ciphers).
S-boxes bring nonlinearity to cryptosystems and strengthen their
cryptographic security. They are used for confusion in data security
An S-box satisfies the strict avalanche criterion (SAC), if and only if
for any single input bit of the S-box, the inversion of it changes each
output bit with probability one half. If a function (cryptographic
transformation) is complete, then each output bit depends on all of
the input bits. Thus, if it were possible to find the simplest Boolean
expression for each output bit in terms of the input bits, each of these
expressions would have to contain all of the input bits if the function
is complete. From some important properties of S-box, the most
interesting property SAC (Strict Avalanche Criterion) is presented
and to analyze this property three analysis methods are proposed.
Abstract: The X-ray technology has been used in non-destructive evaluation in the Power System, in which a visual non-destructive inspection method for the electrical equipment is provided. However, lots of noise is existed in the images that are got from the X-ray digital images equipment. Therefore, the auto defect detection which based on these images will be very difficult to proceed. A theory on X-ray image de-noising algorithm based on wavelet transform is proposed in this paper. Then the edge detection algorithm is used so that the defect can be pushed out. The result of experiment shows that the method which utilized by this paper is very useful for de-noising on the X-ray images.
Abstract: This research intends to introduce a new usage of Artificial Intelligent (AI) approaches in Stepping Stone Detection (SSD) fields of research. By using Self-Organizing Map (SOM) approaches as the engine, through the experiment, it is shown that SOM has the capability to detect the number of connection chains that involved in a stepping stones. Realizing that by counting the number of connection chain is one of the important steps of stepping stone detection and it become the research focus currently, this research has chosen SOM as the AI techniques because of its capabilities. Through the experiment, it is shown that SOM can detect the number of involved connection chains in Network-based Stepping Stone Detection (NSSD).
Abstract: Waste management is now a global concern due to its
high environmental impact on climate change. Because of generating
huge amount of waste through our daily activities, managing waste in
an efficient way has become more important than ever. Alternative
Waste Technology (AWT), a new category of waste treatment
technology has been developed for energy recovery in recent years to
address this issue. AWT describes a technology that redirects waste
away from landfill, recovers more useable resources from the waste
flow and reduces the impact on the surroundings. Australia is one of
the largest producers of waste per-capita. A number of AWTs are
using in Australia to produce energy from waste. Presently, it is vital
to identify an appropriate AWT to establish a sustainable waste
management system in Australia. Identification of an appropriate
AWT through Multi-criteria analysis (MCA) of four AWTs by using
five key decision making criteria is presented and discussed in this
paper.
Abstract: The purpose of this study was to measure the maximal
isometric strength and to investigate the effects of different handleheights
and elbow angles with respect to Mid. sagittal plane on the
pushing and pulling strength in vertical direction. Eight male subjects
performed a series of static strength measurement for each subject.
The highest isometric strength was found in pulling at shoulder
height (S.H.) (Mean = 60.29 lb., SD = 16.78 lb.) and the lowest
isometric strength was found also in pulling at elbow height (E.H.)
(Mean = 33.06 lb., SD = 6.56 lb.). Although the isometric strengths
were higher at S.H than at E.H. for both activities, the maximal
isometric strengths were compared statistically. ANOVA was
performed. The results of the experiment revealed that there was a
significant different between handle heights. However, there were no
significant different between angles and activities, also no correlation
between grip strength and activities.
Abstract: Numerical analysis naturally finds applications in all
fields of engineering and the physical sciences, but in the
21st century, the life sciences and even the arts have adopted
elements of scientific computations. The numerical data analysis
became key process in research and development of all the fields [6].
In this paper we have made an attempt to analyze the specified
numerical patterns with reference to the association rule mining
techniques with minimum confidence and minimum support mining
criteria. The extracted rules and analyzed results are graphically
demonstrated. Association rules are a simple but very useful form of
data mining that describe the probabilistic co-occurrence of certain
events within a database [7]. They were originally designed to
analyze market-basket data, in which the likelihood of items being
purchased together within the same transactions are analyzed.
Abstract: It is hard to express emotion through only speech when
we watch a character in a movie or a play because we cannot estimate
the size, kind, and quantity of emotion. So this paper proposes an
artificial emotion model for visualizing current emotion with color and
location in emotion model. The artificial emotion model is designed
considering causality of generated emotion, difference of personality,
difference of continual emotional stimulus, and co-relation of various
emotions. This paper supposed the Emotion Field for visualizing
current emotion with location, and current emotion is expressed by
location and color in the Emotion Field. For visualizing changes
within current emotion, the artificial emotion model is adjusted to
characters in Hamlet.
Abstract: Based on the component approach, three kinds of
dynamic load models, including a single –motor model, a two-motor
model and composite load model have been developed for the
stability studies of Khuzestan power system. The study results are
presented in this paper. Voltage instability is a dynamic phenomenon
and therefore requires dynamic representation of the power system
components. Industrial loads contain a large fraction of induction
machines. Several models of different complexity are available for
the description investigations. This study evaluates the dynamic
performances of several dynamic load models in combination with
the dynamics of a load changing transformer. Case study is steel
industrial substation in Khuzestan power systems.