Abstract: A novel and versatile numerical technique to solve a self-stress equilibrium state is adopted herein as a form-finding procedure for an irregular tensegrity structure. The numerical form-finding scheme of a tensegrity structure uses only the connectivity matrix and prototype tension coefficient vector as the initial guess solution. Any information on the symmetrical geometry or other predefined initial structural conditions is not necessary to get the solution in the form-finding process. An eight-node initial condition example is presented to demonstrate the efficiency and robustness of the proposed method in the form-finding of an irregular tensegrity structure. Based on the conception from the form-finding of an eight-node irregular tensegrity structure, a monumental object is designed by considering the real world situation such as self-weight, wind and earthquake loadings.
Abstract: In this paper, a multi-branch power line is modeled using ABCD matrix to show its worth as a communication channel. The model is simulated using MATLAB in an effort to investigate the effects of multiple loading, multipath, and those as a result of load mismatching. The channel transfer function is obtained and investigated using different cable lengths, and different number of bridge taps under given loading conditions.
Abstract: This paper presents the experimental results of the
investigation of various properties related to the durability and longterm
performance of mortars made of Fly Ash blended cement, FA
and Ordinary Portland cement, OPC. The properties that were
investigated in an experimental program include; equilibration of
specimen in different relative humidity, determination of total
porosity, compressive strength, chloride permeability index, and
electrical resistivity. Fly Ash blended cement mortar specimens
exhibited 10% to 15% lower porosity when measured at equilibrium
conditions in different relative humidities as compared to the
specimens made of OPC mortar, which resulted in 6% to 8% higher
compressive strength of FA blended cement mortar specimens. The
effects of ambient relative humidity during sample equilibration on
porosity and strength development were also studied. For specimens
equilibrated in higher relative humidity conditions, such as 75%, the
total porosity of different mortar specimens was between 35% to 50%
less than the porosity of samples equilibrated in 12% relative
humidity, consequently leading to higher compressive strengths of
these specimens.A valid statistical correlation between values of
compressive strength, porosity and the degree of saturation was
obtained. Measured values of chloride permeability index of fly ash
blended cement mortar were obtained as one fourth to one sixth of
those measured for OPC mortar specimens, which indicates high
resistance against chloride ion penetration in FA blended cement
specimens, hence resulting in a highly durable mortar.
Abstract: Bacterial molecular chaperone DnaK plays an essential role in protein folding, stress response and transmembrane targeting of proteins. DnaKs from many bacterial species, including Escherichia coli, Salmonella typhimurium and Haemophilus infleunzae are the molecular targets for the insect-derived antimicrobial peptide pyrrhocoricin. Pyrrhocoricin-like peptides bind in the substrate recognition tunnel. Despite the high degree of crossspecies sequence conservation in the substrate-binding tunnel, some bacteria are not sensitive to pyrrhocoricin. This work addresses the molecular mechanism of resistance of Helicobacter pylori DnaK to pyrrhocoricin. Homology modelling, structural and sequence analysis identify a single aminoacid substitution at the interface between the lid and the β-sandwich subdomains of the DnaK substrate-binding domain as the major determinant for its resistance.
Abstract: Buoyancy driven heat transfer of nanofluids in a
cylindrical enclosure used as a control unit in the subsea hydrocarbon
injection wells is investigated in this study. The governing equations
obtained with the Boussinesq approximation are solved using Comsol
Multiphysics finite element analysis and simulation software. The
base fluid is water and CuO is used as nanoparticles. Solution is
obtained for nanoparticle solid volume fraction of 8% and for
Rayleigh number in the range of 105-107. The results show that
nanoparticle usage in the cylindrical electronic control unit has a
significant effect on the flow and heat transfer.
Abstract: In this paper we use the property of co-occurrence
matrix in finding parallel lines in binary pictures for fingerprint
identification. In our proposed algorithm, we reduce the noise by
filtering the fingerprint images and then transfer the fingerprint
images to binary images using a proper threshold. Next, we divide
the binary images into some regions having parallel lines in the same
direction. The lines in each region have a specific angle that can be
used for comparison. This method is simple, performs the
comparison step quickly and has a good resistance in the presence of
the noise.
Abstract: The paper suggests for the first time the use of dynamic programming techniques for optimal risk reduction in the railway industry. It is shown that by using the concept ‘amount of removed risk by a risk reduction option’, the problem related to optimal allocation of a fixed budget to achieve a maximum risk reduction in the railway industry can be reduced to an optimisation problem from dynamic programming. For n risk reduction options and size of the available risk reduction budget B (expressed as integer number), the worst-case running time of the proposed algorithm is O (n x (B+1)), which makes the proposed method a very efficient tool
for solving the optimal risk reduction problem in the railway industry.
Abstract: The Ramon preparation is received from a plant; it is destined for external treatment of inflammations in post-surgery period. The Ramon is a biogenic immune stimulator accelerating metabolism, contributing to improvement of blood indexes, having general tonic, anti-inflammatory and bactericidal effect.
Abstract: Efficient luminescence is reported for the first time in Eu2+ activated double Chlorides A2BCl4 (A=Alkali metal, B=Alkaline earth element). A simple wet-chemical preparation is described. Emission intensities are comparable to that of the commercial phosphor. Excitation covers near UV region. These phosphors may be useful for applications like solid state lighting, scintillation detectors and X-ray storage using photo-stimulable phosphors.
Abstract: Calcium [Ca2+] is an important second messenger
which plays an important role in signal transduction. There are
several parameters that affect its concentration profile like buffer
source etc. The effect of stationary immobile buffer on Ca2+
concentration has been incorporated which is a very important
parameter needed to be taken into account in order to make the
model more realistic. Interdependence of all the important parameters
like diffusion coefficient and influx over [Ca2+] profile has been
studied. Model is developed in the form of advection diffusion
equation together with buffer concentration. A program has been
developed using finite volume method for the entire problem and
simulated on an AMD-Turion 32-bit machine to compute the
numerical results.
Abstract: User satisfaction is one of the most used success
indicators in the research of information system (IS). Literature
shows user expectations have great influence on user satisfaction.
Both expectation and satisfaction of users are important for Hospital
Information Systems (HIS). Education, IS experience, age, attitude
towards change, business title, sex and working unit of the hospital,
are examined as the potential determinant of the medical users’
expectations. Data about medical user expectations are collected by
the “Expectation Questionnaire” developed for this study.
Expectation data are used for calculating the Expectation Meeting
Ratio (EMR) with the evaluation framework also developed for this
study. The internal consistencies of the answers to the questionnaire
are measured by Cronbach´s Alpha coefficient. The multivariate
analysis of medical user’s EMRs of HIS is performed by forward
stepwise binary logistic regression analysis. Education and business
title is appeared to be the determinants of expectations from HIS.
Abstract: Saturated hydraulic conductivity is one of the soil
hydraulic properties which is widely used in environmental studies
especially subsurface ground water. Since, its direct measurement is
time consuming and therefore costly, indirect methods such as
pedotransfer functions have been developed based on multiple linear
regression equations and neural networks model in order to estimate
saturated hydraulic conductivity from readily available soil
properties e.g. sand, silt, and clay contents, bulk density, and organic
matter. The objective of this study was to develop neural networks
(NNs) model to estimate saturated hydraulic conductivity from
available parameters such as sand and clay contents, bulk density,
van Genuchten retention model parameters (i.e. r
θ , α , and n) as well
as effective porosity. We used two methods to calculate effective
porosity: : (1) eff s FC φ =θ -θ , and (2) inf φ =θ -θ eff s , in which s
θ is
saturated water content, FC θ is water content retained at -33 kPa
matric potential, and inf θ is water content at the inflection point.
Total of 311 soil samples from the UNSODA database was divided
into three groups as 187 for the training, 62 for the validation (to
avoid over training), and 62 for the test of NNs model. A commercial
neural network toolbox of MATLAB software with a multi-layer
perceptron model and back propagation algorithm were used for the
training procedure. The statistical parameters such as correlation
coefficient (R2), and mean square error (MSE) were also used to
evaluate the developed NNs model. The best number of neurons in
the middle layer of NNs model for methods (1) and (2) were
calculated 44 and 6, respectively. The R2 and MSE values of the test
phase were determined for method (1), 0.94 and 0.0016, and for
method (2), 0.98 and 0.00065, respectively, which shows that method
(2) estimates saturated hydraulic conductivity better than method (1).
Abstract: This study presents a simulation model for converting coal to methanol, based on gasification technology with the commercial chemical process simulator, Pro/II® V8.1.1. The methanol plant consists of air separation unit (ASU), gasification unit, gas clean-up unit, and methanol synthetic unit. The clean syngas is produced with the first three operating units, and the model has been verified with the reference data from United States Environment Protection Agency. The liquid phase methanol (LPMEOHTM) process is adopted in the methanol synthetic unit. Clean syngas goes through gas handing section to reach the reaction requirement, reactor loop/catalyst to generate methanol, and methanol distillation to get desired purity over 99.9 wt%. The ratio of the total energy combined with methanol and dimethyl ether to that of feed coal is 78.5% (gross efficiency). The net efficiency is 64.2% with the internal power consumption taken into account, based on the assumption that the efficiency of electricity generation is 40%.
Abstract: In this paper, we introduce an effective strategy for
subgoal division and ordering based upon recursive subgoals and
combine this strategy with a genetic-based planning approach. This
strategy can be applied to domains with conjunctive goals. The main
idea is to recursively decompose a goal into a set of serializable
subgoals and to specify a strict ordering among the subgoals.
Empirical results show that the recursive subgoal strategy reduces the
size of the search space and improves the quality of solutions to
planning problems.
Abstract: In this study, we sought to investigate the mercury
removal efficiency of manganese oxides from natural gas. The
fundamental studies on mercury removal with manganese oxides
sorbents were carried out in a laboratory scale fixed bed reactor at 30
°C with a mixture of methane (20%) and nitrogen gas laden with 4.8
ppb of elemental mercury. Manganese oxides with varying surface
area and crystalline phase were prepared by conventional precipitation
method in this study. The effects of surface area, crystallinity and
other metal oxides on mercury removal efficiency were investigated.
Effect of Ag impregnation on mercury removal efficiency was also
investigated. Ag supported on metal oxide such titania and zirconia as
reference materials were also used in this study for comparison. The
characteristics of mercury removal reaction with manganese oxide
was investigated using a temperature programmed desorption (TPD)
technique.
Manganese oxides showed very high Hg removal activity (about
73-93% Hg removal) for first time use. Surface area of the manganese
oxide samples decreased after heat-treatment and resulted in complete
loss of Hg removal ability for repeated use after Hg desorption in the
case of amorphous MnO2, and 75% loss of the initial Hg removal
activity for the crystalline MnO2. Mercury desorption efficiency of
crystalline MnO2 was very low (37%) for first time use and high (98%)
after second time use. Residual potassium content in MnO2 may have
some effect on the thermal stability of the adsorbed Hg species.
Desorption of Hg from manganese oxides occurs at much higher
temperatures (with a peak at 400 °C) than Ag/TiO2 or Ag/ZrO2.
Mercury may be captured on manganese oxides in the form of mercury
manganese oxide.
Abstract: In this paper, the structural genetic algorithm is used to optimize the neural network to control the joint movements of robotic arm. The robotic arm has also been modeled in 3D and simulated in real-time in MATLAB. It is found that Neural Networks provide a simple and effective way to control the robot tasks. Computer simulation examples are given to illustrate the significance of this method. By combining Genetic Algorithm optimization method and Neural Networks for the given robotic arm with 5 D.O.F. the obtained the results shown that the base joint movements overshooting time without controller was about 0.5 seconds, while with Neural Network controller (optimized with Genetic Algorithm) was about 0.2 seconds, and the population size of 150 gave best results.
Abstract: Many multimedia communication applications require a
source to transmit messages to multiple destinations subject to quality
of service (QoS) delay constraint. To support delay constrained
multicast communications, computer networks need to guarantee an
upper bound end-to-end delay from the source node to each of
the destination nodes. This is known as multicast delay problem.
On the other hand, if the same message fails to arrive at each
destination node at the same time, there may arise inconsistency and
unfairness problem among users. This is related to multicast delayvariation
problem. The problem to find a minimum cost multicast
tree with delay and delay-variation constraints has been proven to
be NP-Complete. In this paper, we propose an efficient heuristic
algorithm, namely, Economic Delay and Delay-Variation Bounded
Multicast (EDVBM) algorithm, based on a novel heuristic function,
to construct an economic delay and delay-variation bounded multicast
tree. A noteworthy feature of this algorithm is that it has very high
probability of finding the optimal solution in polynomial time with
low computational complexity.
Abstract: In this paper, Economic Order Quantity (EOQ) based model for non-instantaneous Weibull distribution deteriorating items with power demand pattern is presented. In this model, the holding cost per unit of the item per unit time is assumed to be an increasing linear function of time spent in storage. Here the retailer is allowed a trade-credit offer by the supplier to buy more items. Also in this model, shortages are allowed and partially backlogged. The backlogging rate is dependent on the waiting time for the next replenishment. This model aids in minimizing the total inventory cost by finding the optimal time interval and finding the optimal order quantity. The optimal solution of the model is illustrated with the help of numerical examples. Finally sensitivity analysis and graphical representations are given to demonstrate the model.
Abstract: Visual attention allows user to select the most relevant
information to ongoing behaviour. This paper presents a study on; i)
the performance of people measurements, ii) accurateness of people
measurement of the peaks that correspond to chemical quantities
from the Magnetic Resonance Spectroscopy (MRS) graphs and iii)
affects of people measurements to the algorithm-based diagnosis.
Participant-s eye-movement was recorded using eye-tracker tool
(Eyelink II). This experiment involves three participants for
examining 20 MRS graphs to estimate the peaks of chemical
quantities which indicate the abnormalities associated with
Cerebellar Tumours (CT). The status of each MRS is verified by
using decision algorithm. Analysis involves determination of
humans-s eye movement pattern in measuring the peak of
spectrograms, scan path and determining the relationship of
distributions of fixation durations with the accuracy of measurement.
In particular, the eye-tracking data revealed which aspects of the
spectrogram received more visual attention and in what order they
were viewed. This preliminary investigation provides a proof of
concept for use of the eye tracking technology as the basis for
expanded CT diagnosis.
Abstract: This research studied the simulation of increased
ambient ozone to estimate nutrient content and genetic changes in
two Thai soybean cultivars (Chiang Mai 60 and Srisumrong 1).
Ozone stress conditions affected proteins and lipids. It was found
that proteins decreased, but lipids increased. Srisumrong 1 cultivars
were more sensitive to ozone stress than Chiang Mai 60 cultivars.
The effect of ozone stress conditions on plant phenotype and
genotype was analyzed using the AFLP technique for the 2 Thai
soybean cultivars (Chiang Mai 60 and Srisumrong 1).