Abstract: This paper explores university course timetabling
problem. There are several characteristics that make scheduling and
timetabling problems particularly difficult to solve: they have huge
search spaces, they are often highly constrained, they require
sophisticated solution representation schemes, and they usually
require very time-consuming fitness evaluation routines. Thus
standard evolutionary algorithms lack of efficiency to deal with
them. In this paper we have proposed a memetic algorithm that
incorporates the problem specific knowledge such that most of
chromosomes generated are decoded into feasible solutions.
Generating vast amount of feasible chromosomes makes the progress
of search process possible in a time efficient manner. Experimental
results exhibit the advantages of the developed Hybrid Genetic
Algorithm than the standard Genetic Algorithm.
Abstract: Crystallization has been used for the separation of
chloronitrobenzene or CNBs, which are isomeric substances (o-, mand
p-CNB) and important intermediates in chemical productions. Effects of feed composition on the crystallization of m- and p-CNB was first studied. The results conform to the binary phase diagram of
m- and p-CNB. After that, effects of FAU zeolites (NaX, CaX, BaX, NaY and CaY) above the eutectic composition (63.5 and 65.0 wt% m-CNB in the feed) was also investigated. The results showed that
the FAU zeolites significantly affected the precipitates, the
composition of which was shifted from being rich in m-CNB to rich
in p-CNB. Effects of the number of FAU zeolites on the precipitate composition was then studied. The results revealed that the
precipitates from the lower number of the zeolites had higher p-CNB purity than those from the higher number of zeolite.
Abstract: The role of knowledge is a determinative factor in the
life of economy and society. To determine knowledge is not an easy
task yet the real task is to determine the right knowledge. From this
view knowledge is a sum of experience, ideas and cognitions which
can help companies to remain in markets and to realize a maximum
profit. At the same time changes of circumstances project in advance
that contents and demands of the right knowledge are changing. In
this paper we will analyse a special segment on the basis of an
empirical survey. We investigated the behaviour and strategies of
small and medium sized enterprises (SMEs) in the area of
knowledge-handling. This survey was realized by questionnaires and
wide range statistical methods were used during processing. As a
result we will show how these companies are prepared to operate in a
knowledge-based economy and in which areas they have prominent
deficiencies.
Abstract: One part of the total employee’s reward is apart from basic wages or salary, employee’s benefits and intangible remuneration also so called contingent (variable) pay. Contingent pay is connected to performance, contribution, cap competency or skills of individual employees, and to team’s or company-wide performance or to combination of few of the mentioned possibilities. Sometimes among the contingent pay is also incorporated the remuneration based on length of employment, when the financial reward is not connected to performance or skills, but to length of continuous employment either on one working position or in one level of remuneration scale. Main aim of this article is to define, based on available information, contingent pay, describe individual forms, its advantages and disadvantages and possibilities to utilization in practice; but also bring information not only about its extent and level of utilization of contingent pay by companies in one of the Czech Republic’s regions, but also mention their practical experience with this type of remuneration.
Abstract: Medical image data hiding has strict constrains such
as high imperceptibility, high capacity and high robustness.
Achieving these three requirements simultaneously is highly
cumbersome. Some works have been reported in the literature on
data hiding, watermarking and stegnography which are suitable for
telemedicine applications. None is reliable in all aspects. Electronic
Patient Report (EPR) data hiding for telemedicine demand it blind
and reversible. This paper proposes a novel approach to blind
reversible data hiding based on integer wavelet transform.
Experimental results shows that this scheme outperforms the prior
arts in terms of zero BER (Bit Error Rate), higher PSNR (Peak Signal
to Noise Ratio), and large EPR data embedding capacity with
WPSNR (Weighted Peak Signal to Noise Ratio) around 53 dB,
compared with the existing reversible data hiding schemes.
Abstract: Eye localization is necessary for face recognition and
related application areas. Most of eye localization algorithms reported
so far still need to be improved about precision and computational
time for successful applications. In this paper, we propose an eye
location method based on multi-scale Gabor feature vectors, which is
more robust with respect to initial points. The eye localization based
on Gabor feature vectors first needs to constructs an Eye Model Bunch
for each eye (left or right eye) which consists of n Gabor jets and
average eye coordinates of each eyes obtained from n model face
images, and then tries to localize eyes in an incoming face image by
utilizing the fact that the true eye coordinates is most likely to be very
close to the position where the Gabor jet will have the best Gabor jet
similarity matching with a Gabor jet in the Eye Model Bunch. Similar
ideas have been already proposed in such as EBGM (Elastic Bunch
Graph Matching). However, the method used in EBGM is known to be
not robust with respect to initial values and may need extensive search
range for achieving the required performance, but extensive search
ranges will cause much more computational burden. In this paper, we
propose a multi-scale approach with a little increased computational
burden where one first tries to localize eyes based on Gabor feature
vectors in a coarse face image obtained from down sampling of the
original face image, and then localize eyes based on Gabor feature
vectors in the original resolution face image by using the eye
coordinates localized in the coarse scaled image as initial points.
Several experiments and comparisons with other eye localization
methods reported in the other papers show the efficiency of our
proposed method.
Abstract: An innovative approach utilizing highly alkaline oil
shale waste ash and carbon dioxide gas (CO2), associated with power
production, as a resource for production of precipitated calcium
carbonate (PCC) is introduced in this paper. The specifics and
feasibility of the integrated ash valorization and CO2 sequestration
process by indirect aqueous carbonation of lime-consisting ash were
elaborated and the main parameters established. Detailed description
of the formed precipitates was included. Complimentary carbonation
experiments with commercial CaO fine powder were conducted for
comparative characterization of the final products obtained on the
basis of two different raw materials. Finally, the expected CO2
uptake was evaluated.
Abstract: Facial expression analysis is rapidly becoming an
area of intense interest in computer science and human-computer
interaction design communities. The most expressive way humans
display emotions is through facial expressions. In this paper we
present a method to analyze facial expression from images by
applying Gabor wavelet transform (GWT) and Discrete Cosine
Transform (DCT) on face images. Radial Basis Function (RBF)
Network is used to classify the facial expressions. As a second stage,
the images are preprocessed to enhance the edge details and non
uniform down sampling is done to reduce the computational
complexity and processing time. Our method reliably works even
with faces, which carry heavy expressions.
Abstract: In this paper, the effect of atmospheric turbulence on
bit error probability in free-space optical CDMA scheme with
Sequence Inverse Keyed (SIK) optical correlator receiver is analyzed.
Here Intensity Modulation scheme is considered for transmission.
The turbulence induced fading is described by the newly introduced
gamma-gamma pdf[1] as a tractable mathematical model for
atmospheric turbulence. Results are evaluated with Gold and Kasami
code & it is shown that Gold sequence can be used for more
efficient transmission than Kasami sequence in an atmospheric
turbulence channel.
Abstract: In this paper, we propose a hardware and software
design method for automotive Electronic Control Units (ECU)
considering the functional safety. The proposed ECU is considered for
the application to Electro-Mechanical Actuator systems and the
validity of the design method is shown by the application to the
Electro-Mechanical Brake (EMB) control system which is used as a
brake actuator in Brake-By-Wire (BBW) systems. The importance of a
functional safety-based design approach to EMB ECU design has been
emphasized because of its safety-critical functions, which are executed
with the aid of many electric actuators, sensors, and application
software. Based on hazard analysis and risk assessment according to
ISO26262, the EMB system should be ASIL-D-compliant, the highest
ASIL level. To this end, an external signature watchdog and an
Infineon 32-bit microcontroller TriCore are used to reduce risks
considering common-cause hardware failure. Moreover, a software
design method is introduced for implementing functional
safety-oriented monitoring functions based on an asymmetric dual
core architecture considering redundancy and diversity. The validity
of the proposed ECU design approach is verified by using the EMB
Hardware-In-the-Loop (HILS) system, which consists of the EMB
assembly, actuator ECU, a host PC, and a few debugging devices.
Furthermore, it is shown that the existing sensor fault tolerant control
system can be used more effectively for mitigating the effects of
hardware and software faults by applying the proposed ECU design
method.
Abstract: Nowadays, HPC, Grid and Cloud systems are evolving
very rapidly. However, the development of infrastructure solutions
related to HPC is lagging behind. While the existing infrastructure is
sufficient for simple cases, many computational problems have more
complex requirements.Such computational experiments use different
resources simultaneously to start a large number of computational
jobs.These resources are heterogeneous. They have different
purposes, architectures, performance and used software.Users need a
convenient tool that allows to describe and to run complex
computational experiments under conditions of HPC environment.
This paper introduces a modularworkflow system called SEGL
which makes it possible to run complex computational experiments
under conditions of a real HPC organization. The system can be used
in a great number of organizations, which provide HPC power.
Significant requirements to this system are high efficiency and
interoperability with the existing HPC infrastructure of the
organization without any changes.
Abstract: Future astronomical projects on large space x-ray
imaging telescopes require novel substrates and technologies for the
construction of their reflecting mirrors. The mirrors must be
lightweight and precisely shaped to achieve large collecting area with
high angular resolution. The new materials and technologies must be
cost-effective. Currently, the most promising materials are glass or
silicon foils. We focused on precise shaping these foils by thermal
forming process. We studied free and forced slumping in the
temperature region of hot plastic deformation and compared the
shapes obtained by the different slumping processes. We measured
the shapes and the surface quality of the foils. In the experiments, we
varied both heat-treatment temperature and time following our
experiment design. The obtained data and relations we can use for
modeling and optimizing the thermal forming procedure.
Abstract: This article outlines a hybrid method, incorporating
multiple techniques into an evaluation process, in order to select
competitive suppliers in a supply chain. It enables a purchaser to do
single sourcing and multiple sourcing by calculating a combined
supplier score, which accounts for both qualitative and quantitative
factors that have impact on supply chain performance.
Abstract: Nowadays companies in all sectors are looking for the
sources of competitive advantages. Holistic marketing approach
searches for their emergence based on the integration of all
components and elements across the organization. Modern marketing
sees the sources of competitive advantage in implementing the latest
managerial practices, motivation, intelligent project management,
knowledge management, collaborative marketing, CSR and, in the
recent years, also in the business process optimization. With the use
of modern tools including business process management and business
process modelling the company can markedly increase its internal
efficiency which can lead not only to lowering the costs but to
creating the environment for optimal customer care, positive
corporate culture and for origination of innovations as well. In the
article the authors analyze the recent trend in this area and introduce
suggestions to companies to identify and optimize the key processes
that have a significant impact of the company´s competitiveness.
Abstract: Gurus of the Classical Management School (like
Taylor, Fayol and Ford) had an opinion that work must be delegated
to the individual and the individual has to be instructed, his work
assessed and paid based on individual performance. The theories of
the Human Relations School have changed this mentality regarding
the concept of groups. They came to the conclusion that the influence
of groups greatly affects the behaviour and performance of its
members.
Group theories today are characterized by problem-solving teams
and self-managing groups authorized to make decisions and execute;
professional communities also play an important role during the
operation of knowledge management systems.
In this theoretical research we try to find answers to a question:
what kind of characteristics (professional competencies, personal
features, etc.) a successful team needs to manage a change to operate
a knowledge management system step by step.
Abstract: We developed a non-contact method for the in-situ
monitoring of the thermal forming of glass and Si foils to optimize
the manufacture of mirrors for high-resolution space x-ray
telescopes. Their construction requires precise and light-weight
segmented optics with angular resolution better than 5 arcsec. We
used 75x25 mm Desag D263 glass foils 0.75 mm thick and 0.6 mm
thick Si foils. The glass foils were shaped by free slumping on a
frame at viscosities in the range of 109.3-1012 dPa·s, the Si foils by
forced slumping above 1000°C. Using a Nikon D80 digital camera,
we took snapshots of a foil-s shape every 5 min during its isothermal
heat treatment. The obtained results we can use for computer
simulations. By comparing the measured and simulated data, we can
more precisely define material properties of the foils and optimize
the forming technology.
Abstract: For this study, this researcher conducted a precision
network adjustment with QOCA, the precision network adjustment
software developed by Jet Propulsion Laboratory, to perform an
integrated network adjustment on the Unified Control Points managed
by the National Geographic Information Institute. Towards this end,
275 Unified Control Points observed in 2008 were selected before a
network adjustment is performed on those 275 Unified Control Points.
The RMSE on the discrepancies of coordinates as compared to the
results of GLOBK was ±6.07mm along the N axis, ±2.68mm along the
E axis and ±6.49mm along the U axis.
Abstract: When a high DC voltage is applied to a capacitor with
strongly asymmetrical electrodes, it generates a mechanical force that
affects the whole capacitor. This is caused by the motion of ions generated around the smaller of the two electrodes and their subsequent interaction with the surrounding medium. If one of the electrodes is heated, it changes the conditions around the capacitor
and influences the process of ionisation, thus changing the value of the generated force. This paper describes these changes and gives
reasons behind them. Further the experimental results are given as proof of the ionic mechanism of the phenomenon.