Abstract: Internet is without any doubt the fastest and effective mean of communication making it possible to reach a great number of people in the world. It draws its base from exchange points. Indeed exchange points are used to inter-connect various Internet suppliers and operators in order to allow them to exchange traffic and it is with these interconnections that Internet made its great strides. They thus make it possible to limit the traffic delivered via the operators of transits. This limitation allows a significant improvement of the quality of service, a reduction in the latency time just as a reduction of the cost of connection for the final subscriber. Through this article we will show how the installation of an IXP allows an improvement and a diversification of the services just as a reduction of the Internet connection costs.
Abstract: This paper presents the methodology from machine
learning approaches for short-term rain forecasting system. Decision
Tree, Artificial Neural Network (ANN), and Support Vector Machine
(SVM) were applied to develop classification and prediction models
for rainfall forecasts. The goals of this presentation are to
demonstrate (1) how feature selection can be used to identify the
relationships between rainfall occurrences and other weather
conditions and (2) what models can be developed and deployed for
predicting the accurate rainfall estimates to support the decisions to
launch the cloud seeding operations in the northeastern part of
Thailand. Datasets collected during 2004-2006 from the
Chalermprakiat Royal Rain Making Research Center at Hua Hin,
Prachuap Khiri khan, the Chalermprakiat Royal Rain Making
Research Center at Pimai, Nakhon Ratchasima and Thai
Meteorological Department (TMD). A total of 179 records with 57
features was merged and matched by unique date. There are three
main parts in this work. Firstly, a decision tree induction algorithm
(C4.5) was used to classify the rain status into either rain or no-rain.
The overall accuracy of classification tree achieves 94.41% with the
five-fold cross validation. The C4.5 algorithm was also used to
classify the rain amount into three classes as no-rain (0-0.1 mm.),
few-rain (0.1- 10 mm.), and moderate-rain (>10 mm.) and the overall
accuracy of classification tree achieves 62.57%. Secondly, an ANN
was applied to predict the rainfall amount and the root mean square
error (RMSE) were used to measure the training and testing errors of
the ANN. It is found that the ANN yields a lower RMSE at 0.171 for
daily rainfall estimates, when compared to next-day and next-2-day
estimation. Thirdly, the ANN and SVM techniques were also used to
classify the rain amount into three classes as no-rain, few-rain, and
moderate-rain as above. The results achieved in 68.15% and 69.10%
of overall accuracy of same-day prediction for the ANN and SVM
models, respectively. The obtained results illustrated the comparison
of the predictive power of different methods for rainfall estimation.
Abstract: The paper represents a reflection on how to select proper indicators to assess the progress of regional contexts towards a knowledge-based society. Taking the first research methodologies elaborated at an international level (World Bank, OECD, etc.) as a reference point, this work intends to identify a set of indicators of the knowledge economy suitable to adequately understand in which manner and to which extent the territorial development dynamics are correlated with the knowledge-base of the considered local society. After a critical survey of the variables utilized within other approaches adopted by international or national organizations, this paper seeks to elaborate a framework of variables, named Regional Knowledge Economy Indicators (ReKEI), necessary to describe the knowledge-based relations of subnational socio-economic contexts. The realization of this framework has a double purpose: an analytical one consisting in highlighting the regional differences in the governance of knowledge based processes, and an operative one consisting in providing some reference parameters for contributing to increasing the effectiveness of those economic policies aiming at enlarging the knowledge bases of local societies.
Abstract: The main objective of this study was to remove and recover Ni, Cu and Fe from a mixed metal system using sodium hypophosphite as a reducing agent and nickel powder as seeding material. The metal systems studied consisted of Ni-Cu, Ni-Fe and Ni-Cu-Fe solutions. A 5 L batch reactor was used to conduct experiments where 100 mg/l of each respective metal was used. It was found that the metals were reduced to their elemental form with removal efficiencies of over 80%. The removal efficiency decreased in the order Fe>Ni>Cu. The metal powder obtained contained between 97-99% Ni and was almost spherical and porous. Size enlargement by aggregation was the dominant particulate process.
Abstract: Cardiovascular diseases, principally atherosclerosis, are responsible for 30% of world deaths. Atherosclerosis is due to the formation of plaque. The fatty plaque may be at risk of rupture, leading typically to stroke and heart attack. The plaque is usually associated with a high degree of lumen reduction, called a stenosis.It is increasingly recognized that the initiation and progression of disease and the occurrence of clinical events is a complex interplay between the local biomechanical environment and the local vascular biology. The aim of this study is to investigate the flow behavior through a stenosed artery. A physical experiment was performed using an artery model and blood analogue fluid. An axisymmetric model constructed consists of contraction and expansion region that follow a mathematical form of cosine function. A 30% diameter reduction was used in this study. The flow field was measured using particle image velocimetry (PIV). Spherical particles with 20μm diameter were seeded in a water-glycerol-NaCl mixture. Steady flow Reynolds numbers are 250. The area of interest is the region after the stenosis where the flow separation occurs. The velocity field was measured and the velocity gradient was investigated. There was high particle concentration in the recirculation zone. High velocity gradient formed immediately after the stenosis throat created a lift force that enhanced particle migration to the flow separation area.
Abstract: This research was conducted to determine responses
of chickpeas to drought in different periods (early period, late period,
no-irrigation, two times irrigation as control). The trial was made in
“Randomized Complete Block Design" with three replications on
2010 and 2011 years in Konya-Turkey. Genotypes were consisted
from 7 lines of ICARDA, 2 certified lines and 1 local population. The
results showed that; as means of years and genotypes, early period
stress showed highest (207.47 kg da-1) seed yield and it was followed
by control (202.33 kg da-1), late period (144.64 kg da-1) and normal
(106.93 kg da-1) stress applications. The genotypes were affected too
much by drought and, the lowest seed was taken from non-irrigated
plots. As the means of years and stress applications, the highest
(196.01 kg da-1) yield was taken from genotype 22255. The reason of
yield variation could be derived from different responses of
genotypes to drought.
Abstract: This paper investigates the effect of product substitution in the single-period 'newsboy-type' problem in a fuzzy environment. It is supposed that the single-period problem operates under uncertainty in customer demand, which is described by imprecise terms and modelled by fuzzy sets. To perform this analysis, we consider the fuzzy model for two-item with upward substitution. This upward substitutability is reasonable when the products can be stored according to certain attribute levels such as quality, brand or package size. We show that the explicit consideration of this substitution opportunity increase the average expected profit. Computational study is performed to observe the benefits of product's substitution.
Abstract: In this paper, determining the optimal proportionalintegral-
derivative (PID) controller gains of an single-area load
frequency control (LFC) system using genetic algorithm (GA) is
presented. The LFC is notoriously difficult to control optimally using
conventionally tuning a PID controller because the system parameters
are constantly changing. It is for this reason the GA as tuning strategy
was applied. The simulation has been conducted in MATLAB
Simulink package for single area power system. the simulation results
shows the effectiveness performance of under various disturbance.
Abstract: Although lots of research work has been done for
human pose recognition, the view-point of cameras is still critical
problem of overall recognition system. In this paper, view-point
insensitive human pose recognition is proposed. The aims of the
proposed system are view-point insensitivity and real-time processing.
Recognition system consists of feature extraction module, neural
network and real-time feed forward calculation. First, histogram-based
method is used to extract feature from silhouette image and it is
suitable for represent the shape of human pose. To reduce the
dimension of feature vector, Principle Component Analysis(PCA) is
used. Second, real-time processing is implemented by using Compute
Unified Device Architecture(CUDA) and this architecture improves
the speed of feed-forward calculation of neural network. We
demonstrate the effectiveness of our approach with experiments on
real environment.
Abstract: An acyclic coloring of a graph G is a coloring of its
vertices such that:(i) no two neighbors in G are assigned the same
color and (ii) no bicolored cycle can exist in G. The acyclic chromatic
number of G is the least number of colors necessary to acyclically
color G. Recently it has been proved that any graph of maximum
degree 5 has an acyclic chromatic number at most 8. In this paper
we present another proof for this result.
Abstract: Increasing demand on the performance of Subsea
Production Systems (SPS) suggests a need for more detailed
investigation of fluid behavior taking place in subsea equipment.
Complete CFD cool down analyses of subsea equipment are very
time demanding. The objective of this paper is to investigate a
Locked CFD approach, which enables significant reduction of the
computational time and at the same time maintains sufficient
accuracy during thermal cool down simulations. The result
comparison of a dead leg simulation using the Full CFD and the three
LCFD-methods confirms the validity of the locked flow field
assumption for the selected case. For the tested case the LCFD
simulation speed up by factor of 200 results in the absolute thermal
error of 0.5 °C (3% relative error), speed up by factor of 10 keeps the
LCFD results within 0.1 °C (0.5 % relative error) comparing to the
Full CFD.
Abstract: A group of Stellite alloys are studied in consideration
of temperature effects on their hardness and wear resistance. The
hardness test is conducted on a micro-hardness tester with a hot stage
equipped that allows heating the specimen up to 650°C. The wear
resistance of each alloy is evaluated using a pin-on-disc tribometer
with a heating furnace built-in that provides the temperature capacity
up to 450°C. The experimental results demonstrate that the hardness
and wear resistance of Stellite alloys behave differently at room
temperature and at high temperatures. The wear resistance of Stellite
alloys at room temperature mainly depends on their carbon content and
also influenced by the tungsten content in the alloys. However, at high
temperatures the wear mechanisms of Stellite alloys become more
complex, involving multiple factors. The relationships between
chemical composition, microstructure, hardness and wear resistance of
these alloys are studied, with focus on temperature effect on these
relations.
Abstract: The focus of this paper is to highlight the design and
development of an educational game prototype as an evaluation
instrument for the Malaysia driving license static test. This
educational game brings gaming technology into the conventional
objective static test to make it more effective, real and interesting.
From the feeling of realistic, the future driver can learn something,
memorized and use it in the real life. The current online objective
static test only make the user memorized the answer without knowing
and understand the true purpose of the question. Therefore, in real
life, they will not behave as expected due to behavior and moral
lacking. This prototype has been developed inform of multiple-choice
questions integrated with 3D gaming environment to make it simulate
the real environment and scenarios. Based on the testing conducted,
the respondent agrees with the use of this game prototype it can
increase understanding and promote obligation towards traffic rules.
Abstract: With the development of technology, the growing
trend of fast and safe passenger transport, air pollution, traffic
congestion, increase in problems such as the increasing population
and the high cost of private vehicle usage made many cities around
the world with a population of more or less, start to build rail systems
as a means of urban transport in order to ensure the economic and
environmental sustainability and more efficient use of land in the
city. The implementation phase of rail systems costs much more than
other public transport systems. However, social and economic returns
in the long term made these systems the most popular investment tool
for planned and developing cities.
In our country, the purpose, goals and policies of transportation
plans are away from integrity, and the problems are not clearly
detected. Also, not defined and incomplete assessment of
transportation systems and insufficient financial analysis are the most
important cause of failure. Rail systems and other transportation
systems to be addressed as a whole is seen as the main factor in
increasing efficiency in applications that are not integrated yet in our
country to come to this point has led to the problem.
Abstract: Methanol-to-olefins coupled with transformation of
coal or natural gas to methanol gives an interesting and promising way
to produce ethylene and propylene. To investigate solid concentration
in gas-solid fluidized bed for methanol-to-olefins process catalyzed by
SAPO-34, a cold model experiment system is established in this paper.
The system comprises a gas distributor in a 300mm internal diameter
and 5000mm height acrylic column, the fiber optic probe system and
series of cyclones. The experiments are carried out at ambient
conditions and under different superficial gas velocity ranging from
0.3930m/s to 0.7860m/s and different initial bed height ranging from
600mm to 1200mm. The effects of radial distance, axial distance,
superficial gas velocity, initial bed height on solid concentration in the
bed are discussed. The effects of distributor shape and porosity on
solid concentration are also discussed. The time-averaged solid
concentration profiles under different conditions are obtained.
Abstract: In this paper, a neural network tuned fuzzy controller
is proposed for controlling Multi-Input Multi-Output (MIMO)
systems. For the convenience of analysis, the structure of MIMO
fuzzy controller is divided into single input single-output (SISO)
controllers for controlling each degree of freedom. Secondly,
according to the characteristics of the system-s dynamics coupling, an
appropriate coupling fuzzy controller is incorporated to improve the
performance. The simulation analysis on a two-level mass–spring
MIMO vibration system is carried out and results show the
effectiveness of the proposed fuzzy controller. The performance
though improved, the computational time and memory used is
comparatively higher, because it has four fuzzy reasoning blocks and
number may increase in case of other MIMO system. Then a fuzzy
neural network is designed from a set of input-output training data to
reduce the computing burden during implementation. This control
strategy can not only simplify the implementation problem of fuzzy
control, but also reduce computational time and consume less
memory.
Abstract: This research was conducted in the Lower Namkam
Irrigation Project situated in the Namkam River Basin in Thailand.
Degradation of groundwater quality in some areas is caused by saline
soil spots beneath ground surface. However, the tail regulated gate
structure on the Namkam River, a lateral stream of the Mekong
River. It is aimed for maintaining water level in the river at +137.5 to
+138.5 m (MSL) and flow to the irrigation canals based on a gravity
system since July 2009. It might leach some saline soil spots from
underground to soil surface if lack of understanding of the
conjunctive surface water and groundwater behaviors. This research
has been conducted by continuously the observing of both shallow
and deep groundwater level and quality from existing observation
wells. The simulation of surface water was carried out using a
hydrologic modeling system (HEC-HMS) to compute the ungauged
side flow catchments as the lateral flows for the river system model
(HEC-RAS). The constant water levels in the upstream of the
operated gate caused a slight rising up of shallow groundwater level
when compared to the water table. However, the groundwater levels
in the confined aquifers remained less impacted than in the shallow
aquifers but groundwater levels in late of wet season in some wells
were higher than the phreatic surface. This causes salinization of the
groundwater at the soil surface and might affect some crops. This
research aims for the balance of water stage in the river and efficient
groundwater utilization in this area.
Abstract: A stiffened laminated composite panel (1 m length ×
0.5m width) was optimized for minimum weight and deflection under
several constraints using genetic algorithm. Here, a significant study
on the performance of a penalty function with two kinds of static and
dynamic penalty factors was conducted. The results have shown that
linear dynamic penalty factors are more effective than the static ones.
Also, a specially combined linear-exponential function has shown to
perform more effective than the previously mentioned penalty
functions. This was then resulted in the less sensitivity of the GA to
the amount of penalty factor.
Abstract: The purpose of our study was to compare spontaneous
re-epithelisation characteristics versus assisted re-epithelisation. In
order to assess re-epithelisation of the injured skin, we have imagined
and designed a burn wound model on Wistar rat skin. Our aim was to
create standardised, easy reproducible and quantifiable skin lesions
involving entire epidermis and superficial dermis. We then have
applied the above mentioned therapeutic strategies to compare
regeneration of epidermis and dermis, local and systemic parameter
changes in different conditions. We have enhanced the reepithelisation
process under a moist atmosphere of a polyurethane
wound dress modified with helium non-thermal plasma, and with the
aid of direct cold-plasma treatment respectively. We have followed
systemic parameters change: hematologic and biochemical
parameters, and local features: oxidative stress markers and histology
of skin in the above mentioned conditions. Re-epithelisation is just a
part of the skin regeneration process, which recruits cellular
components, with the aid of epidermal and dermal interaction via
signal molecules.
Abstract: This paper describes the implementation and testing
of a multichannel active noise control system (ANCS) based on the
filtered-inverse LMS (FILMS) algorithm. The FILMS algorithm is
derived from the well-known filtered-x LMS (FXLMS) algorithm
with the aim to improve the rate of convergence of the multichannel
FXLMS algorithm and to reduce its computational load. Laboratory
setup and techniques used to implement this system efficiently are
described in this paper. Experiments performed in order to test the
performance of the FILMS algorithm are discussed and the obtained
results presented.