Abstract: Researches show that probability-statistical methods application, especially at the early stage of the aviation Gas Turbine Engine (GTE) technical condition diagnosing, when the flight information has property of the fuzzy, limitation and uncertainty is unfounded. Hence the efficiency of application of new technology Soft Computing at these diagnosing stages with the using of the Fuzzy Logic and Neural Networks methods is considered. According to the purpose of this problem training with high accuracy of fuzzy multiple linear and non-linear models (fuzzy regression equations) which received on the statistical fuzzy data basis is made. For GTE technical condition more adequate model making dynamics of skewness and kurtosis coefficients- changes are analysed. Researches of skewness and kurtosis coefficients values- changes show that, distributions of GTE work parameters have fuzzy character. Hence consideration of fuzzy skewness and kurtosis coefficients is expedient. Investigation of the basic characteristics changes- dynamics of GTE work parameters allows drawing conclusion on necessity of the Fuzzy Statistical Analysis at preliminary identification of the engines' technical condition. Researches of correlation coefficients values- changes shows also on their fuzzy character. Therefore for models choice the application of the Fuzzy Correlation Analysis results is offered. At the information sufficiency is offered to use recurrent algorithm of aviation GTE technical condition identification (Hard Computing technology is used) on measurements of input and output parameters of the multiple linear and non-linear generalised models at presence of noise measured (the new recursive Least Squares Method (LSM)). The developed GTE condition monitoring system provides stageby- stage estimation of engine technical conditions. As application of the given technique the estimation of the new operating aviation engine technical condition was made.
Abstract: Statistical analysis of electrophysiological recordings
obtained under, e.g. tactile, stimulation frequently suggests participation
in the network dynamics of experimentally unobserved “hidden"
neurons. Such interneurons making synapses to experimentally
recorded neurons may strongly alter their dynamical responses to
the stimuli. We propose a mathematical method that formalizes this
possibility and provides an algorithm for inferring on the presence
and dynamics of hidden neurons based on fitting of the experimental
data to spike trains generated by the network model. The model
makes use of Integrate and Fire neurons “chemically" coupled
through exponentially decaying synaptic currents. We test the method
on simulated data and also provide an example of its application to
the experimental recording from the Dorsal Column Nuclei neurons
of the rat under tactile stimulation of a hind limb.
Abstract: Bus Rapid Transit (BRT) has emerged as a cost-effective transport system for urban mobility. However its ability to stimulate land development remains largely unexplored. The study makes use of qualitative (interview method) and quantitative analysis (questionnaire survey and longitudinal analysis of property data) to investigate land development impact resulting from BRT in Beijing, China. The empirical analysis suggests that BRT has a positive impact on the residential and commercial property attractiveness along the busway corridor. The statistical analysis suggests that accessibility advantage conferred by BRT is capitalized into higher property price. The average price of apartments adjacent to a BRT station has gained a relatively faster increase than those not served by the BRT system. The capitalization effect mostly occurs after the full operation of BRT, and is more evident over time and particularly observed in areas which previously lack alternative mobility opportunity.
Abstract: In this paper, an Arabic letter recognition system based on Artificial Neural Networks (ANNs) and statistical analysis for feature extraction is presented. The ANN is trained using the Least Mean Squares (LMS) algorithm. In the proposed system, each typed Arabic letter is represented by a matrix of binary numbers that are used as input to a simple feature extraction system whose output, in addition to the input matrix, are fed to an ANN. Simulation results are provided and show that the proposed system always produces a lower Mean Squared Error (MSE) and higher success rates than the current ANN solutions.
Abstract: Iris pattern is an important biological feature of human body; it becomes very hot topic in both research and practical applications. In this paper, an algorithm is proposed for iris recognition and a simple, efficient and fast method is introduced to extract a set of discriminatory features using first order gradient operator applied on grayscale images. The gradient based features are robust, up to certain extents, against the variations may occur in contrast or brightness of iris image samples; the variations are mostly occur due lightening differences and camera changes. At first, the iris region is located, after that it is remapped to a rectangular area of size 360x60 pixels. Also, a new method is proposed for detecting eyelash and eyelid points; it depends on making image statistical analysis, to mark the eyelash and eyelid as a noise points. In order to cover the features localization (variation), the rectangular iris image is partitioned into N overlapped sub-images (blocks); then from each block a set of different average directional gradient densities values is calculated to be used as texture features vector. The applied gradient operators are taken along the horizontal, vertical and diagonal directions. The low order norms of gradient components were used to establish the feature vector. Euclidean distance based classifier was used as a matching metric for determining the degree of similarity between the features vector extracted from the tested iris image and template features vectors stored in the database. Experimental tests were performed using 2639 iris images from CASIA V4-Interival database, the attained recognition accuracy has reached up to 99.92%.
Abstract: The present study was conducted to observe the effect
of Plantago psyllium on blood glucose and cholesterol levels in
normal and alloxan induced diabetic rats. To investigate the effect of
Plantago psyllium 40 rats were included in this study divided into
four groups of ten rats in each group. One group A was normal,
second group B was diabetic, third group C was non diabetic and
hypercholesterolemic and fourth group D was diabetic and
hypercholesterolemic. Two groups B and D were made diabetic by
intraperitonial injection of alloxan dissolved in 1mL distilled water at
a dose of 125mg/Kg of body weight. Two groups C and D were
made hypercholesterolemic by oral administration of powder
cholesterol (1g/Kg of body weight). The blood samples from all the
rats were collected from coccygial vein on 1st day, then on 21st and
42nd day respectively. All the samples were analyzed for blood
glucose and cholesterol level by using enzymatic kits. The blood
glucose and cholesterol levels of treated groups of rats showed
significant reduction after 7 weeks of treatment with Plantago
psyllium. By statistical analysis of results it was found that Plantago
psyllium has anti-diabetic and hypocholesterolemic activity in
diabetic and hypercholesterolemic albino rats.
Abstract: The performance results of the athletes competed in
the 1988-2008 Olympic Games were analyzed (n = 166). The data
were obtained from the IAAF official protocols. In the principal
component analysis, the first three principal components explained
70% of the total variance. In the 1st principal component (with
43.1% of total variance explained) the largest factor loadings were
for 100m (0.89), 400m (0.81), 110m hurdle run (0.76), and long jump
(–0.72). This factor can be interpreted as the 'sprinting performance'.
The loadings on the 2nd factor (15.3% of the total variance)
presented a counter-intuitive throwing-jumping combination: the
highest loadings were for throwing events (javelin throwing 0.76;
shot put 0.74; and discus throwing 0.73) and also for jumping events
(high jump 0.62; pole vaulting 0.58). On the 3rd factor (11.6% of
total variance), the largest loading was for 1500 m running (0.88); all
other loadings were below 0.4.
Abstract: Wavelength multiplexing (WDM) technology along
with optical amplifiers is used for optical communication systems in
S-band, C-band and L-band. To improve the overall system
performance Hybrid amplifiers consisting of cascaded TDFA and
EDFA with different gain bandwidths are preferred for long haul
wavelength multiplexed optical communication systems. This paper
deals with statistical analysis of different configuration of hybrid
amplifier i.e. analysis of TDFA-EDFA configuration and EDFA –
TDFA configuration. In this paper One-Way ANOVA method is used
for statistical analysis.
Abstract: This paper analyzed the perception of e-commerce
application services by construction material traders in Malaysia.
Five attributes were tested: usability, reputation, trust, privacy and
familiarity. Study methodology consists of survey questionnaire and
statistical analysis that includes reliability analysis, factor analysis,
ANOVA and regression analysis. The respondents were construction
material traders, including hardware stores in Klang Valley, Kuala
Lumpur.
Findings support that usability and familiarity with e-commerce
services in Malaysia have insignificant influence on the acceptance of
e-commerce application. However, reputation, trust and privacy
attributes have significant influence on the choice of e-commerce
acceptance by construction material traders. E-commerce
applications studied included customer database, e-selling, emarketing,
e-payment, e-buying and online advertising. Assumptions
are made that traders have basic knowledge and exposure to ICT
services. i.e. internet service and computers. Study concludes that
reputation, privacy and trust are the three website attributes that
influence the acceptance of e-commerce by construction material
traders.
Abstract: Machining is an important manufacturing process used to produce a wide variety of metallic parts. Among various machining processes, turning is one of the most important one which is employed to shape cylindrical parts. In turning, the quality of finished product is measured in terms of surface roughness. In turn, surface quality is determined by machining parameters and tool geometry specifications. The main objective of this study is to simultaneously model and optimize machining parameters and tool geometry in order to improve the surface roughness for AISI1045 steel. Several levels of machining parameters and tool geometry specifications are considered as input parameters. The surface roughness is selected as process output measure of performance. A Taguchi approach is employed to gather experimental data. Then, based on signal-to-noise (S/N) ratio, the best sets of cutting parameters and tool geometry specifications have been determined. Using these parameters values, the surface roughness of AISI1045 steel parts may be minimized. Experimental results are provided to illustrate the effectiveness of the proposed approach.
Abstract: The performances of small and medium enterprises
have stagnated in the last two decades. This has mainly been due to
the emergence of HIV / Aids. The disease has had a detrimental
effect on the general economy of the country leading to morbidity
and mortality of the Kenyan workforce in their primary age. The
present study sought to establish the economic impact of HIV / Aids
on the micro-enterprise development in Obunga slum – Kisumu, in
terms of production loss, increasing labor related cost and to establish
possible strategies to address the impact of HIV / Aids on microenterprises.
The study was necessitated by the observation that most
micro-enterprises in the slum are facing severe economic and social
crisis due to the impact of HIV / Aids, they get depleted and close
down within a short time due to death of skilled and experience
workforce. The study was carried out between June 2008 and June
2009 in Obunga slum. Data was subjected to computer aided
statistical analysis that included descriptive statistic, chi-squared and
ANOVA techniques. Chi-squared analysis on the micro-enterprise
owners opinion on the impact of HIV / Aids on depletion of microenterprise
compared to other diseases indicated high levels of the
negative effects of the disease at significance levels of P
Abstract: The purpose of this paper primarily intends to develop GIS interface for estimating sequences of stream-flows at ungauged stations based on known flows at gauged stations. The integrated GIS interface is composed of three major steps. The first, precipitation characteristics using statistical analysis is the procedure for making multiple linear regression equation to get the long term mean daily flow at ungauged stations. The independent variables in regression equation are mean daily flow and drainage area. Traditionally, mean flow data are generated by using Thissen polygon method. However, method for obtaining mean flow data can be selected by user such as Kriging, IDW (Inverse Distance Weighted), Spline methods as well as other traditional methods. At the second, flow duration curve (FDC) is computing at unguaged station by FDCs in gauged stations. Finally, the mean annual daily flow is computed by spatial interpolation algorithm. The third step is to obtain watershed/topographic characteristics. They are the most important factors which govern stream-flows. In summary, the simulated daily flow time series are compared with observed times series. The results using integrated GIS interface are closely similar and are well fitted each other. Also, the relationship between the topographic/watershed characteristics and stream flow time series is highly correlated.
Abstract: The quality improvements of the environmental
elements could increase the recreational opportunities in a certain
area (destination). The technique of the need for recreation focuses
on choosing certain destinations for recreational purposes. The basic
exchange taken into consideration is the one between the satisfaction
gained after staying in that area and the value expressed in money
and time allocated. The number of tourists in the respective area, the
duration of staying and the money spent including transportation
provide information on how individuals rank the place or certain
aspects of the area (such as the quality of the environmental
elements).
For the statistical analysis of the environmental benefits offered by
an area through the need of recreation technique, the following stages
are suggested:
- characterization of the reference area based on the
statistical variables considered;
- estimation of the environmental benefit through
comparing the reference area with other similar areas
(having the same environmental characteristics), from
the perspective of the statistical variables considered.
The model compared in recreation technique faced with a series of
difficulties which refers to the reference area and correct
transformation of time in money.
Abstract: Advertising today has already become an integral part
of human life as a building block of the consumer community. A
component of the value chain of the media, advertising sector is
struggling increasingly harder to find new methods to reach
consumers. The tendency towards experimental marketing practices
is increasing day by day, especially to divert consumers from the idea
“They are selling something to me.” It is therefore considered a good
idea to investigate the trust in ad media of consumers, who are today
exposed to a great bulk of information from advertising sector.
In this study, the current value of ad media for the young
consumer will be investigated. Data on various ad media reliability
will be comparatively analyzed and young consumers will be traced
by including university students in the study. In this research, which
will be performed on students studying at the Selçuk University
(Turkey) by random sampling method, data will be obtained by
survey technique and evaluated by a statistical analysis.
Abstract: The aim of this study was to examine the dynamics of functional composition of a non flooded Amazonian forest in response to drought stress in terms of diameter growth, recruitment and mortality. The survey was carried out in the continuous forest of the Biological dynamics of forest fragments project 90 km outside the city of Manaus, state of Amazonas Brazil. All stems >10 cm dbh where identified to species level and monitored in 18 one hectare permanent sample plots from 1981 to 2004.For statistical analysis all species where aggregated in three ecological guilds. Two distinct drought events occurred in 1983 and 1997. Results showed that more early successional species performed better than later successional ones. Response was significant for both events but for the 1997 event this was more pronounced possibly because of the fact that the event was in the middle of the dry rather than the wet period as was the 1983 one.
Abstract: In this paper is reported an analysis about the outdoor air pollution of the urban centre of the city of Messina. The variations of the most critical pollutants concentrations (PM10, O3, CO, C6H6) and their trends respect of climatic parameters and vehicular traffic have been studied. Linear regressions have been effectuated for representing the relations among the pollutants; the differences between pollutants concentrations on weekend/weekday were also analyzed. In order to evaluate air pollution and its effects on human health, a method for calculating a pollution index was implemented and applied in the urban centre of the city. This index is based on the weighted mean of the most detrimental air pollutants concentrations respect of their limit values for protection of human health. The analyzed data of the polluting substances were collected by the Assessorship of the Environment of the Regional Province of Messina in the year 2004. A statistical analysis of the air quality index trends is also reported.
Abstract: Increasing use of cell phone as a medium of human interaction is playing a vital role in solving riddles of crime as well. A young girl went missing from her home late in the evening in the month of August, 2008 when her enraged relatives and villagers physically assaulted and chased her fiancée who often frequented her home. Two years later, her mother lodged a complaint against the relatives and the villagers alleging that after abduction her daughter was either sold or killed as she had failed to trace her. On investigation, a rusted cell phone with partial visible IMEI number, clothes, bangles, human skeleton etc. recovered from abandoned well in the month of May, 2011 were examined in the lab. All hopes pinned on identity of cell phone, for only linking evidence to fix the scene of occurrence supported by call detail record (CDR) and to dispel doubts about mode of sudden disappearance or death as DNA technology did not help in establishing identity of the deceased. The conventional scientific methods were used without success and international mobile equipment identification number of the cell phone could be generated by using statistical analysis followed by online verification.
Abstract: Safety Health and Environment Code of Practice (SHE
COP) was developed to help road transportation operators to manage
its operation in a systematic and safe manner. A study was conducted
to determine the effectiveness of SHE COP implementation during
non-OPS period. The objective of the study is to evaluate the
implementations of SHE COP among bus operators during wee hour
operations. The data was collected by completing a set of checklist
after observing the activities during pre departure, during the trip, and
upon arrival. The results show that there are seven widely practiced
SHE COP elements. 22% of the buses have average speed exceeding
the maximum permissible speed on the highways (90 km/h), with
13% of the buses were travelling at the speed of more than 100 km/h.
The statistical analysis shows that there is only one significant
association which relates speeding with prior presence of
enforcement officers.
Abstract: The impact force of a rockfall is mainly determined by
its moving behavior and velocity, which are contingent on the rock
shape, slope gradient, height, and surface roughness of the moving
path. It is essential to precisely calculate the moving path of the
rockfall in order to effectively minimize and prevent damages caused
by the rockfall. By applying the Colorado Rockfall Simulation
Program (CRSP) program as the analysis tool, this research studies the
influence of three shapes of rock (spherical, cylindrical and discoidal)
and surface roughness on the moving path of a single rockfall. As
revealed in the analysis, in addition to the slope gradient, the geometry
of the falling rock and joint roughness coefficient ( JRC ) of the slope
are the main factors affecting the moving behavior of a rockfall. On a
single flat slope, both the rock-s bounce height and moving velocity
increase as the surface gradient increases, with a critical gradient value
of 1:m = 1 . Bouncing behavior and faster moving velocity occur more
easily when the rock geometry is more oval. A flat piece tends to cause
sliding behavior and is easily influenced by the change of surface
undulation. When JRC
Abstract: The hydrologic time series data display periodic
structure and periodic autoregressive process receives considerable
attention in modeling of such series. In this communication long
term record of monthly waste flow of Lyari river is utilized to
quantify by using PAR modeling technique. The parameters of
model are estimated by using Frances & Paap methodology. This
study shows that periodic autoregressive model of order 2 is the most
parsimonious model for assessing periodicity in waste flow of the
river. A careful statistical analysis of residuals of PAR (2) model is
used for establishing goodness of fit. The forecast by using proposed
model confirms significance and effectiveness of the model.