Abstract: The design of technological procedures for
manufacturing certain products demands the definition and
optimization of technological process parameters. Their
determination depends on the model of the process itself and its
complexity. Certain processes do not have an adequate mathematical
model, thus they are modeled using heuristic methods. First part of
this paper presents a state of the art of using soft computing
techniques in manufacturing processes from the perspective of
applicability in modern CAx systems. Methods of artificial
intelligence which can be used for this purpose are analyzed. The
second part of this paper shows some of the developed models of
certain processes, as well as their applicability in the actual
calculation of parameters of some technological processes within the
design system from the viewpoint of productivity.
Abstract: Raman spectroscopy are used to characterize the
chemical changes in normoxic polyhydroxyethylacrylate gel
dosimeter (PHEA) induced by radiation. Irradiations in the low dose
region are performed and the polymerizations of PHEA gels are
monitored by the observing the changes of Raman shift intensity of
the carbon covalent bond of PHEA originated from both monomer
and the cross-linker. The variation in peak intensities with absorbed
dose was observed. As the dose increase, the peak intensities of
covalent bond of carbon in the polymer gels decrease. This point out
that the amount of absorbed dose affect the polymerization of
polymer gels. As the absorbed dose increase, the polymerizations
also increase. Results verify that PHEA gel dosimeters are sensitive
even in lower dose region.
Abstract: The proposed multiplexer-based novel 1-bit full
adder cell is schematized by using DSCH2 and its layout is generated
by using microwind VLSI CAD tool. The adder cell layout
interconnect analysis is performed by using BSIM4 layout analyzer.
The adder circuit is compared with other six existing adder circuits
for parametric analysis. The proposed adder cell gives better
performance than the other existing six adder circuits in terms of
power, propagation delay and PDP. The proposed adder circuit is
further analyzed for interconnect analysis, which gives better
performance than other adder circuits in terms of layout thickness,
width and height.
Abstract: In this paper, an efficient local appearance feature
extraction method based the multi-resolution Curvelet transform is
proposed in order to further enhance the performance of the well
known Linear Discriminant Analysis(LDA) method when applied
to face recognition. Each face is described by a subset of band
filtered images containing block-based Curvelet coefficients. These
coefficients characterize the face texture and a set of simple statistical
measures allows us to form compact and meaningful feature vectors.
The proposed method is compared with some related feature extraction
methods such as Principal component analysis (PCA), as well
as Linear Discriminant Analysis LDA, and independent component
Analysis (ICA). Two different muti-resolution transforms, Wavelet
(DWT) and Contourlet, were also compared against the Block Based
Curvelet-LDA algorithm. Experimental results on ORL, YALE and
FERET face databases convince us that the proposed method provides
a better representation of the class information and obtains much
higher recognition accuracies.
Abstract: In synchronized games players make their moves simultaneously
rather than alternately. Synchronized Triomineering
and Synchronized Tridomineering are respectively the synchronized
versions of Triomineering and Tridomineering, two variants of a
classic two-player combinatorial game called Domineering. Experimental
results for small m × n boards (with m + n ≤ 12 for
Synchronized Triomineering and m + n ≤ 10 for Synchronized
Tridomineering) and some theoretical results for general k×n boards
(with k = 3, 4, 5 for Synchronized Triomineering and k = 3
for Synchronized Tridomineering) are presented. Future research is
indicated.
Abstract: Abstract–The objectives of the current study are to determine the
prevalence, etiological agents, drug susceptibility pattern and plasmid
profile of Acinetobacter baumannii isolates from Hospital-Acquired
Infections (HAI) at Community Hospital, Al Jouf Province, Saudi
Arabia. A total of 1890 patients had developed infection during
hospital admission and were included in the study. Among those who
developed nosocomial infections, 15(9.4), 10(2.7) and 118 (12.7) had
respiratory tract infection (RTI), blood stream infections (BSI) and
urinary tract (UTI) respectively. A total of 268 bacterial isolates were
isolated from nosocomial infection. S. aureus was reported in 23.5%
for of the total isolates followed by Klebsiella pneumoniae (17.5%), E.
coli (17.2%), P. aeruginosa (11.9%), coagulase negative
staphylococcus (9%), A. baumannii (7.1%), Enterobacter spp.
(3.4%), Citrobacter freundii (3%), Proteus mirabilis (2.6%), and
Proteus vulgaris and Enterococcous faecalis (0.7%). Isolated
organisms are multi-drug resistant, predominantly Gram-positive
pathogens with a high incidence of methicillin-resistant S. aureus,
extended spectrum beta lactamase and vancomycin resistant
enterococci organisms. The RFLP (Fragment Length Polymorphisms)
patterns of plasmid preparations from isolated A. baumannii isolates
had altered RFLP patterns, possibly due to the presence of plasmid(s).
Five A. baumannii isolates harbored plasmids all of which were not
less than 2.71kbp in molecular weight. Hence, it showed that the gene
coding for the isolates were located on the plasmid DNA while the
remaining isolates which have no plasmid might showed gene coding
for antibiotic resistance being located on chromosomal DNA.
Nosocomial infections represent a current problem in Community
Hospital, Al Jouf Province, Saudi Arabia. Problems associated with
SSI include infection with multidrug resistant pathogens which are
difficult to treat and are associated with increased mortality.
Abstract: We consider a network of two M/M/1 parallel queues having the same poisonnian arrival stream with rate λ. Upon his arrival to the system a customer heads to the shortest queue and stays until being served. If the two queues have the same length, an arriving customer chooses one of the two queues with the same probability. Each duration of service in the two queues is an exponential random variable with rate μ and no jockeying is permitted between the two queues. A new numerical method, based on linear programming and convex optimization, is performed for the computation of the steady state solution of the system.
Abstract: In this paper, we present an approach for soccer video
edition using a multimodal annotation. We propose to associate with
each video sequence of a soccer match a textual document to be used
for further exploitation like search, browsing and abstract edition.
The textual document contains video meta data, match meta data, and
match data. This document, generated automatically while the video
is analyzed, segmented and classified, can be enriched semi
automatically according to the user type and/or a specialized
recommendation system.
Abstract: The Corporate Social Responsibility (CSR) performance has garnered significant interest during the last two decades as numerous methodologies are proposed by Social Responsible Investment (SRI) indexes. The weight of each indicator is a crucial component of the CSR measurement procedures. Based on a previous study, the appropriate weight of each proposed indicator for the Greek telecommunication sector is specified using the rank reciprocal weighting. The Kendall-s Coefficient of Concordance and Spearman Correlation Coefficient non-parametric tests are adopted to determine the level of consensus among the experts concerning the importance rank of indicators. The results show that there is no consensus regarding the rank of indicators in most of stakeholders- domains. The equal weight for all indicators could be proposed as a solution for the lack of consensus among the experts. The study recommends three different equations concerning the adopted weight approach.
Abstract: This paper addresses functional projective lag synchronization of Lorenz system with four unknown parameters, where the output of the master system lags behind the output of the slave system proportionally. For this purpose, an adaptive control law is proposed to make the states of two identical Lorenz systems asymptotically synchronize up. Based on Lyapunov stability theory, a novel criterion is given for asymptotical stability of the null solution of an error dynamics. Finally, some numerical examples are provided to show the effectiveness of our results.
Abstract: In this study, a nickel film with nano-crystalline grains,
high hardness and smooth surface was electrodeposited using a post
supercritical carbon dioxide (CO2) mixed Watts electrolyte. Although
the hardness was not as high as its Sc-CO2 counterpart, the thin coating
contained significantly less number of nano-sized pinholes. By
measuring the escape concentration of the dissolved CO2 in post
Sc-CO2 mixed electrolyte with the elapsed time, it was believed that
the residue of dissolved CO2 bubbles should closely relate to the
improvement in hardness and surface roughness over its conventional
plating counterpart. Therefore, shortening the duration of
electroplating with the raise of current density up to 0.5 A/cm2 could
effectively retain more post Sc-CO2 mixing effect. This study not only
confirms the roles of dissolved CO2 bubbles in electrolyte but also
provides a potential process to overcome most issues associated with
the cost in building high-pressure chamber for large size products and
continuous plating using supercritical method.
Abstract: This paper describes the experimental efficiency of a
compact organic Rankine cycle (ORC) system with a compact
rotary-vane-type expander. The compact ORC system can be used for
power generation from low-temperature heat sources such as waste
heat from various small-scale heat engines, fuel cells, electric devices,
and solar thermal energy. The purpose of this study is to develop an
ORC system with a low power output of less than 1 kW with a hot
temperature source ranging from 60°C to 100°C and a cold
temperature source ranging from 10°C to 30°C. The power output of
the system is rather less due to limited heat efficiency. Therefore, the
system should have an economically optimal efficiency. In order to
realize such a system, an efficient and low-cost expander is
indispensable. An experimental ORC system was developed using the
rotary-vane-type expander which is one of possible candidates of the
expander. The experimental results revealed the expander
performance for various rotation speeds, expander efficiencies, and
thermal efficiencies. Approximately 30 W of expander power output
with 48% expander efficiency and 4% thermal efficiency with a
temperature difference between the hot and cold sources of 80°C was
achieved.
Abstract: The intention of this study to design the probability optimized sewing sack-s workstation based on ergonomics for productivity improvement and decreasing musculoskeletal disorders. The physical dimensions of two workers were using to design the new workstation. The physical dimensions are (1) sitting height, (2) mid shoulder height sitting, (3) shoulder breadth, (4) knee height, (5) popliteal height, (6) hip breadth and (7) buttock-knee length. The 5th percentile of buttock knee length sitting (51 cm), the 50th percentile of mid shoulder height sitting (62 cm) and the 95th percentile of popliteal height (43 cm) and hip breadth (45 cm) applied to design the workstation for sewing sack-s operator and the others used to adjust the components of this workstation. The risk assessment by RULA before and after using the probability optimized workstation were 7 and 7 scores and REBA scores were 11 and 5, respectively. Body discomfort-abnormal index was used to assess muscle fatigue of operators before adjustment workstation found that neck muscles, arm muscles area, muscles on the back and the lower back muscles fatigue. Therefore, the extension and flexion exercise was applied to relief musculoskeletal stresses. The workers exercised 15 minutes before the beginning and the end of work for 5 days. After that, the capability of flexion and extension muscles- workers were increasing in 3 muscles (arm, leg, and back muscles).
Abstract: Background: Tissue Doppler Echocardiography
(TDE) assesses diastolic function more accurately than routine pulse
Doppler echo. Assessment of the effects of dynamic and static
exercises on the heart by using TDE can provides new information
about the athlete-s heart syndrome. Methods: This study was
conducted on 20 elite wrestlers, 14 endurance runners at national
level and 21 non-athletes as the control group. Participants underwent
two-dimensional echocardiography, standard Doppler and TDE.
Results: Wrestlers had the highest left ventricular mass index, enddiastolic
inter-ventricular septum thickness and left ventricular
Posterior wall thickness. Runners had the highest Left ventricular
end-diastolic volume, LV ejection fraction, stroke volume and
cardiac output. In TDE, the early diastolic velocity of mitral annulus
to the late diastolic velocity ratio in athletic groups was greater than
the controls with no significant difference. Conclusion: In spite of
cardiac morphological changes in athletes, TDE shows that cardiac
diastolic function won-t be adversely affected.
Abstract: An adaptive neural network controller for
autonomous underwater vehicles (AUVs) is presented in this paper.
The AUV model is highly nonlinear because of many factors, such as
hydrodynamic drag, damping, and lift forces, Coriolis and centripetal
forces, gravity and buoyancy forces, as well as forces from thruster.
In this regards, a nonlinear neural network is used to approximate the
nonlinear uncertainties of AUV dynamics, thus overcoming some
limitations of conventional controllers and ensure good performance.
The uniform ultimate boundedness of AUV tracking errors and the
stability of the proposed control system are guaranteed based on
Lyapunov theory. Numerical simulation studies for motion control of
an AUV are performed to demonstrate the effectiveness of the
proposed controller.
Abstract: Productivity has been one of the major concerns with the increasingly high cost of software development. Choosing the right development language with high productivity is one approach to reduce development costs. Working on the large database with 4106 projects ever developed, we found the factors significant to productivity. After the removal of the effects of other factors on productivity, we compare the productivity differences of the ten general development programs. The study supports the fact that fourth-generation languages are more productive than thirdgeneration languages.
Abstract: In multi-parameter family of distributions, conditions
for a modified maximum likelihood estimator to be second order
admissible are given. Applying these results to the multi-parameter
logistic regression model, it is shown that the maximum likelihood
estimator is always second order inadmissible. Also, conditions for
the Berkson estimator to be second order admissible are given.
Abstract: Fire disaster is the major factor to endanger the public
and environmental safety. People lost their life during fire disaster
mainly be attributed to the dense smoke and toxic gas under
combustion, which hinder the escape of people and the rescue of
firefighters under fire disaster. The smoke suppression effect of
several transitional metals oxide on the epoxy resin treated with
intumescent flame retardant and titanate couple agent
(EP/IFR/Titanate) system have been investigated. The results showed
manganese dioxide has great effect on reducing the smoke density rate
(SDR) of EP/IFR/Titanate system; however it has little effect to reduce
the maximum smoke density (MSD) of EP/IFR/Titanate system.
Copper oxide can decrease the maximum smoke density (MSD) and
smoke density rate of EP/IFR/Titanate system substantially. The MSD
and SDR of EP/IFR/Titanate system can reduce 20.3% and 39.1%
respectively when 2% of copper oxide is introduced.
Abstract: We consider the problem of bandwidth allocation in a
substrate network as an optimization problem for the aggregate utility
of multiple applications with diverse requirements and describe a
simulation scheme for dynamically adaptive bandwidth allocation
protocols. The proposed simulation model based on Coloured Petri
Nets (CPN) is realized using CPN Tools.
Abstract: The intention of this paper is, to help the user of evolutionary algorithms to adapt them easier to their problem at hand. For a lot of problems in the technical field it is not necessary to reach an optimum solution, but to reach a good solution in time. In many cases the solution is undetermined or there doesn-t exist a method to determine the solution. For these cases an evolutionary algorithm can be useful. This paper intents to give the user rules of thumb with which it is easier to decide if the problem is suitable for an evolutionary algorithm and how to design them.