Abstract: Dual motor drives fed by single inverter is
purposely designed to reduced size and cost with respect to
single motor drives fed by single inverter. Previous researches
on dual motor drives only focus on the modulation and the
averaging techniques. Only a few of them, study the
performance of the drives based on different speed controller
other than Proportional and Integrator (PI) controller. This
paper presents a detailed comparative study on fuzzy rule-base
in Fuzzy Logic speed Controller (FLC) for Dual Permanent
Magnet Synchronous Motor (PMSM) drives. Two fuzzy speed
controllers which are standard and simplified fuzzy speed
controllers are designed and the results are compared and
evaluated. The standard fuzzy controller consists of 49 rules
while the proposed controller consists of 9 rules determined by
selecting the most dominant rules only. Both designs are
compared for wide range of speed and the robustness of both
controllers over load disturbance changes is tested to
demonstrate the effectiveness of the simplified/reduced rulebase.
Abstract: The paper presents a new system for the automat
control of the aircrafts- flight in lateral plane using the cinematic
model and the dynamic inversion. Starting from the equations of the
aircrafts- lateral movement, the authors use two axes systems and
obtained a control law that cancels the lateral deviation of the flying
objects from the runway line. This system makes the aircrafts-
direction angle to follow the direction angle of the runway line.
Simulations in Matlab/Simulink have been done for different
aircraft-s initial points and direction angles. The inconvenience of
this system is the long duration of the “transient regime". That is why
this system can be used independently, but the results are not very
good; thus, it can be a part (subsystem) of other systems. The main
system that cancels the lateral deviation from the runway line is
based on dynamic inversion and uses, as subsystem, the control
system for the lateral movement using the cinematic model. Using
complex Matlab/Simulink models, the authors obtained the time
evolution of the direction angle and the time evolution of the aircraft
lateral deviation with respect to the runway line, for different values
of the initial direction angle and for different wind types. The system
has a very good behavior for all initial direction angles and wind
types.
Abstract: UML is a collection of notations for capturing a software system specification. These notations have a specific syntax defined by the Object Management Group (OMG), but many of their constructs only present informal semantics. They are primarily graphical, with textual annotation. The inadequacies of standard UML as a vehicle for complete specification and implementation of real-time embedded systems has led to a variety of competing and complementary proposals. The Real-time UML profile (UML-RT), developed and standardized by OMG, defines a unified framework to express the time, scheduling and performance aspects of a system. We present in this paper a framework approach aimed at deriving a complete specification of a real-time system. Therefore, we combine two methods, a semiformal one, UML-RT, which allows the visual modeling of a realtime system and a formal one, CSP+T, which is a design language including the specification of real-time requirements. As to show the applicability of the approach, a correct design of a real-time system with hard real time constraints by applying a set of mapping rules is obtained.
Abstract: A new secure knapsack cryptosystem based on the
Merkle-Hellman public key cryptosystem will be proposed in this
paper. Although it is common sense that when the density is low, the
knapsack cryptosystem turns vulnerable to the low-density attack. The
density d of a secure knapsack cryptosystem must be larger than
0.9408 to avoid low-density attack. In this paper, we investigate a
new Permutation Combination Algorithm. By exploiting this
algorithm, we shall propose a novel knapsack public-key cryptosystem.
Our proposed scheme can enjoy a high density to avoid the
low-density attack. The density d can also exceed 0.9408 to avoid
the low-density attack.
Abstract: The amount of the information being churned out by the field of biology has jumped manifold and now requires the extensive use of computer techniques for the management of this information. The predominance of biological information such as protein sequence similarity in the biological information sea is key information for detecting protein evolutionary relationship. Protein sequence similarity typically implies homology, which in turn may imply structural and functional similarities. In this work, we propose, a learning method for detecting remote protein homology. The proposed method uses a transformation that converts protein sequence into fixed-dimensional representative feature vectors. Each feature vector records the sensitivity of a protein sequence to a set of amino acids substrings generated from the protein sequences of interest. These features are then used in conjunction with support vector machines for the detection of the protein remote homology. The proposed method is tested and evaluated on two different benchmark protein datasets and it-s able to deliver improvements over most of the existing homology detection methods.
Abstract: In this paper, we explore a new scheme for filtering spoofed packets (DDOS attack) which is a combination of path fingerprint and client puzzle concepts. In this each IP packet has a unique fingerprint is embedded that represents, the route a packet has traversed. The server maintains a mapping table which contains the client IP address and its corresponding fingerprint. In ingress router, client puzzle is placed. For each request, the puzzle issuer provides a puzzle which the source has to solve. Our design has the following advantages over prior approaches, 1) Reduce the network traffic, as we place a client puzzle at the ingress router. 2) Mapping table at the server is lightweight and moderate.
Abstract: We propose an all optical flip-flop circuit composedof two Silicon-on-insulator microring resonators coupled to straightwaveguides by exploiting the optical bistability behavior due to thenonlinear Kerr effect. We used the transfer matrix analysis toinvestigate continuous wave propagation through microrings, as wellwe considered the nonlinear switching characteristics of an opticaldevice using a double-coupler silicon ring resonator in presence ofthe Kerr nonlinearity, thus obtaining the bistability behavior of theoutput port, the drop port and also inside the silicon microringresonator. It is shown that the bistability behavior depends on thecontrol of the input wavelength.KeywordsAll optical flip-flops, Kerr effect, microringresonator, optical bistability.
Abstract: The objective is to split a simply connected polygon
into a set of convex quadrilaterals without inserting new
boundary nodes. The presented approach consists in repeatedly
removing quadrilaterals from the polygon. Theoretical results
pertaining to quadrangulation of simply connected polygons are
derived from the usual 2-ear theorem. It produces a quadrangulation
technique with O(n) number of quadrilaterals. The
theoretical methodology is supplemented by practical results
and CAD surface segmentation.
Abstract: In this paper, The T-G-action topology on a set acted
on by a fuzzy T-neighborhood (T-neighborhood, for short) group is
defined as a final T-neighborhood topology with respect to a set of
maps. We mainly prove that this topology is a T-regular Tneighborhood
topology.
Abstract: This study carried out to determine the effect of plant
densities on some agronomic characteristics of four safflower cultivars in spring planting. The experiment was conducted at Yazd,
Iran- using a factorial in a randomized complete block design with four replications. Cultivars were including Arak, IL, Asteria and Local and plant densities were 10, 13.3, 20 and 40 plant/m2. Number
of seeds/head, number of heads/plant, HI, 1000-seed weight and seed yield significantly decreased as planting density increased. With increasing planting density, LAI, plant height, first branch height and
biological yield increased. The highest seed yield was obtained in 13.3 plant/m2 (2167 kg/ha). There were significant differences
between cultivars. Local cv. had higher seed yield than the other cultivars mainly due to higher heads/plant and seeds/head.
Abstract: Hydrogen is regarded to play an important role in
future energy systems because it can be produced from abundant
resources and its combustion only generates water. The disposal of
waste tyres is a major problem in environmental management
throughout the world. The use of waste materials as a source of
hydrogen is particularly of interest in that it would also solve a waste
treatment problem. There is much interest in the use of alternative
feedstocks for the production of hydrogen since more than 95% of
current production is from fossil fuels. The pyrolysis of waste tyres
for the production of liquid fuels, activated carbons and gases has
been extensively researched. However, combining pyrolysis with
gasification is a novel process that can gasify the gaseous products
from pyrolysis. In this paper, an experimental investigation into the
production of hydrogen and other gases from the bench scale
pyrolysis-gasification of tyres has been investigated. Experiments
were carried using a two stage system consisting of pyrolysis of the
waste tyres followed by catalytic steam gasification of the evolved
gases and vapours in a second reactor. Experiments were conducted
at a pyrolysis temperature of 500 °C using Ni/Al2O3 as a catalyst. The
results showed that there was a dramatic increase in gas yield and the
potential H2 production when the gasification temperature was
increased from 600 to 900 oC. Overall, the process showed that high
yields of hydrogen can be produced from waste tyres.
Abstract: Main goal of preventive healthcare problems are at
decreasing the likelihood and severity of potentially life-threatening
illnesses by protection and early detection. The levels of
establishment and staffing costs along with summation of the travel
and waiting time that clients spent are considered as objectives
functions of the proposed nonlinear integer programming model. In
this paper, we have proposed a bi-objective mathematical model for
designing a network of preventive healthcare facilities so as to
minimize aforementioned objectives, simultaneously. Moreover, each
facility acts as M/M/1 queuing system. The number of facilities to be
established, the location of each facility, and the level of technology
for each facility to be chosen are provided as the main determinants
of a healthcare facility network. Finally, to demonstrate performance
of the proposed model, four multi-objective decision making
techniques are presented to solve the model.
Abstract: The security of computer networks plays a strategic
role in modern computer systems. Intrusion Detection Systems (IDS)
act as the 'second line of defense' placed inside a protected
network, looking for known or potential threats in network traffic
and/or audit data recorded by hosts. We developed an Intrusion
Detection System using LAMSTAR neural network to learn patterns
of normal and intrusive activities, to classify observed system
activities and compared the performance of LAMSTAR IDS with
other classification techniques using 5 classes of KDDCup99 data.
LAMSAR IDS gives better performance at the cost of high
Computational complexity, Training time and Testing time, when
compared to other classification techniques (Binary Tree classifier,
RBF classifier, Gaussian Mixture classifier). we further reduced the
Computational Complexity of LAMSTAR IDS by reducing the
dimension of the data using principal component analysis which in
turn reduces the training and testing time with almost the same
performance.
Abstract: This paper presents a forgetting factor scheme for variable step-size affine projection algorithms (APA). The proposed scheme uses a forgetting processed input matrix as the projection matrix of pseudo-inverse to estimate system deviation. This method introduces temporal weights into the projection matrix, which is typically a better model of the real error's behavior than homogeneous temporal weights. The regularization overcomes the ill-conditioning introduced by both the forgetting process and the increasing size of the input matrix. This algorithm is tested by independent trials with coloured input signals and various parameter combinations. Results show that the proposed algorithm is superior in terms of convergence rate and misadjustment compared to existing algorithms. As a special case, a variable step size NLMS with forgetting factor is also presented in this paper.
Abstract: Many recent electrophysiological studies have
revealed the importance of investigating meditation state in order to
achieve an increased understanding of autonomous control of
cardiovascular functions. In this paper, we characterize heart rate
variability (HRV) time series acquired during meditation using
nonlinear dynamical parameters. We have computed minimum
embedding dimension (MED), correlation dimension (CD), largest
Lyapunov exponent (LLE), and nonlinearity scores (NLS) from HRV
time series of eight Chi and four Kundalini meditation practitioners.
The pre-meditation state has been used as a baseline (control) state to
compare the estimated parameters. The chaotic nature of HRV during
both pre-meditation and meditation is confirmed by MED. The
meditation state showed a significant decrease in the value of CD and
increase in the value of LLE of HRV, in comparison with premeditation
state, indicating a less complex and less predictable nature
of HRV. In addition, it was shown that the HRV of meditation state
is having highest NLS than pre-meditation state. The study indicated
highly nonlinear dynamic nature of cardiac states as revealed by
HRV during meditation state, rather considering it as a quiescent
state.
Abstract: This paper in essence presents comparative
experimental data on the mechanical performance of steel and
synthetic fibre-reinforced concrete under compression, tensile split
and flexure. URW1050 steel fibre and HPP45 synthetic fibre, both
with the same concrete design mix, have been used to make cube
specimens for a compression test, cylinders for a tensile split test and
beam specimens for a flexural test. The experimental data
demonstrated steel fibre reinforced concrete to be stronger in flexure
at early stages, whilst both fibre reinforced concrete types displayed
comparatively the same performance in compression, tensile splitting
and 28-day flexural strength. In terms of post-crack controlHPP45
was preferable.
Abstract: The recognition of handwritten numeral is an
important area of research for its applications in post office, banks
and other organizations. This paper presents automatic recognition of
handwritten Kannada numerals based on structural features. Five
different types of features, namely, profile based 10-segment string,
water reservoir; vertical and horizontal strokes, end points and
average boundary length from the minimal bounding box are used in
the recognition of numeral. The effect of each feature and their
combination in the numeral classification is analyzed using nearest
neighbor classifiers. It is common to combine multiple categories of
features into a single feature vector for the classification. Instead,
separate classifiers can be used to classify based on each visual
feature individually and the final classification can be obtained based
on the combination of separate base classification results. One
popular approach is to combine the classifier results into a feature
vector and leaving the decision to next level classifier. This method
is extended to extract a better information, possibility distribution,
from the base classifiers in resolving the conflicts among the
classification results. Here, we use fuzzy k Nearest Neighbor (fuzzy
k-NN) as base classifier for individual feature sets, the results of
which together forms the feature vector for the final k Nearest
Neighbor (k-NN) classifier. Testing is done, using different features,
individually and in combination, on a database containing 1600
samples of different numerals and the results are compared with the
results of different existing methods.
Abstract: The deterministic quantum transfer-matrix (QTM)
technique and its mathematical background are presented. This
important tool in computational physics can be applied to a class of
the real physical low-dimensional magnetic systems described by the
Heisenberg hamiltonian which includes the macroscopic molecularbased
spin chains, small size magnetic clusters embedded in some
supramolecules and other interesting compounds. Using QTM, the
spin degrees of freedom are accurately taken into account, yielding
the thermodynamical functions at finite temperatures.
In order to test the application for the susceptibility calculations to
run in the parallel environment, the speed-up and efficiency of
parallelization are analyzed on our platform SGI Origin 3800 with
p = 128 processor units. Using Message Parallel Interface (MPI)
system libraries we find the efficiency of the code of 94% for
p = 128 that makes our application highly scalable.
Abstract: High strength concrete (HSC) provides high strength
but lower ductility than normal strength concrete. This low ductility
limits the benefit of using HSC in building safe structures. On the
other hand, when designing reinforced concrete beams, designers
have to limit the amount of tensile reinforcement to prevent the
brittle failure of concrete. Therefore the full potential of the use of
steel reinforcement can not be achieved. This paper presents the idea
of confining concrete in the compression zone so that the HSC will
be in a state of triaxial compression, which leads to improvements in
strength and ductility. Five beams made of HSC were cast and tested.
The cross section of the beams was 200×300 mm, with a length of 4
m and a clear span of 3.6 m subjected to four-point loading, with
emphasis placed on the midspan deflection. The first beam served as
a reference beam. The remaining beams had different tensile
reinforcement and the confinement shapes were changed to gauge
their effectiveness in improving the strength and ductility of the
beams. The compressive strength of the concrete was 85 MPa and the
tensile strength of the steel was 500 MPa and for the stirrups and
helixes was 250 MPa. Results of testing the five beams proved that
placing helixes with different diameters as a variable parameter in the
compression zone of reinforced concrete beams improve their
strength and ductility.
Abstract: This article concerns with the accessibility of Business
process modelling tools (BPMo tools) and business process
modelling languages (BPMo languages). Therefore the reader will be
introduced to business process management and the authors'
motivation behind this inquiry. Afterwards, the paper will reflect
problems when applying inaccessible BPMo tools. To illustrate these
problems the authors distinguish between two different categories of
issues and provide practical examples. Finally the article will present
three approaches to improve the accessibility of BPMo tools and
BPMo languages.