Abstract: In this paper, image compression using hybrid vector
quantization scheme such as Multistage Vector Quantization
(MSVQ) and Pyramid Vector Quantization (PVQ) are introduced. A
combined MSVQ and PVQ are utilized to take advantages provided
by both of them. In the wavelet decomposition of the image, most of
the information often resides in the lowest frequency subband.
MSVQ is applied to significant low frequency coefficients. PVQ is
utilized to quantize the coefficients of other high frequency
subbands. The wavelet coefficients are derived using lifting scheme.
The main aim of the proposed scheme is to achieve high compression
ratio without much compromise in the image quality. The results are
compared with the existing image compression scheme using MSVQ.
Abstract: The objective from this paper is to design a solar
thermal engine for space vehicles orbital control and electricity
generation. A computational model is developed for the prediction of
the solar thermal engine performance for different design parameters and conditions in order to enhance the engine efficiency. The engine is divided into two main subsystems. First, the concentrator dish
which receives solar energy from the sun and reflects them to the
cavity receiver. The second one is the cavity receiver which receives
the heat flux reflected from the concentrator and transfers heat to the
fluid passing over. Other subsystems depend on the application required from the engine. For thrust application, a nozzle is
introduced to the system for the fluid to expand and produce thrust.
Hydrogen is preferred as a working fluid in the thruster application.
Results model developed is used to determine the thrust for a
concentrator dish 4 meters in diameter (provides 10 kW of energy),
focusing solar energy to a 10 cm aperture diameter cavity receiver.
The cavity receiver outer length is 50 cm and the internal cavity is 47
cm in length. The suggested design material of the internal cavity is
tungsten to withstand high temperature. The thermal model and
analysis shows that the hydrogen temperature at the plenum reaches
2000oK after about 250 seconds for hot start operation for a flow rate
of 0.1 g/sec.Using solar thermal engine as an electricity generation
device on earth is also discussed. In this case a compressor and
turbine are used to convert the heat gained by the working fluid (air)
into mechanical power. This mechanical power can be converted into
electrical power by using a generator.
Abstract: In this work, the primary compressive strength
components of human femur trabecular bone are qualitatively
assessed using image processing and wavelet analysis. The Primary
Compressive (PC) component in planar radiographic femur trabecular
images (N=50) is delineated by semi-automatic image processing
procedure. Auto threshold binarization algorithm is employed to
recognize the presence of mineralization in the digitized images. The
qualitative parameters such as apparent mineralization and total area
associated with the PC region are derived for normal and abnormal
images.The two-dimensional discrete wavelet transforms are utilized
to obtain appropriate features that quantify texture changes in medical
images .The normal and abnormal samples of the human femur are
comprehensively analyzed using Harr wavelet.The six statistical
parameters such as mean, median, mode, standard deviation, mean
absolute deviation and median absolute deviation are derived at level
4 decomposition for both approximation and horizontal wavelet
coefficients. The correlation coefficient of various wavelet derived
parameters with normal and abnormal for both approximated and
horizontal coefficients are estimated. It is seen that in almost all cases
the abnormal show higher degree of correlation than normals. Further
the parameters derived from approximation coefficient show more
correlation than those derived from the horizontal coefficients. The
parameters mean and median computed at the output of level 4 Harr
wavelet channel was found to be a useful predictor to delineate the
normal and the abnormal groups.
Abstract: The study investigated the effects of Teaching Games
for Understanding approach on students ‘cognitive learning outcome.
The study was a quasi-experimental non-equivalent pretest-posttest
control group design whereby 10 year old primary school students
(n=72) were randomly assigned to an experimental and a control
group. The experimental group students were exposed with TGfU
approach and the control group with the Traditional Skill approach of
handball game. Game Performance Assessment Instrument (GPAI)
was used to measure students' tactical understanding and decision
making in 3 versus 3 handball game situations. Analysis of
covariance (ANCOVA) was used to analyze the data. The results
reveal that there was a significant difference between the TGfU
approach group and the traditional skill approach group students on
post test score (F (1, 69) = 248.83, p < .05). The findings of this
study suggested the importance of TGfU approach to improve
primary students’ tactical understanding and decision making in
handball game.
Abstract: Yeast cells live in a constantly changing environment that requires the continuous adaptation of their genomic program in order to sustain their homeostasis, survive and proliferate. Due to the advancement of high throughput technologies, there is currently a large amount of data such as gene expression, gene deletion and protein-protein interactions for S. Cerevisiae under various environmental conditions. Mining these datasets requires efficient computational methods capable of integrating different types of data, identifying inter-relations between different components and inferring functional groups or 'modules' that shape intracellular processes. This study uses computational methods to delineate some of the mechanisms used by yeast cells to respond to environmental changes. The GRAM algorithm is first used to integrate gene expression data and ChIP-chip data in order to find modules of coexpressed and co-regulated genes as well as the transcription factors (TFs) that regulate these modules. Since transcription factors are themselves transcriptionally regulated, a three-layer regulatory cascade consisting of the TF-regulators, the TFs and the regulated modules is subsequently considered. This three-layer cascade is then modeled quantitatively using artificial neural networks (ANNs) where the input layer corresponds to the expression of the up-stream transcription factors (TF-regulators) and the output layer corresponds to the expression of genes within each module. This work shows that (a) the expression of at least 33 genes over time and for different stress conditions is well predicted by the expression of the top layer transcription factors, including cases in which the effect of up-stream regulators is shifted in time and (b) identifies at least 6 novel regulatory interactions that were not previously associated with stress-induced changes in gene expression. These findings suggest that the combination of gene expression and protein-DNA interaction data with artificial neural networks can successfully model biological pathways and capture quantitative dependencies between distant regulators and downstream genes.
Abstract: Cement, the most widely used construction material
is very brittle and characterized by low tensile strength and strain
capacity. Macro to nano fibers are added to cement to provide
tensile strength and ductility to it. Carbon Nanotube (CNT), one of
the nanofibers, has proven to be a promising reinforcing material in
the cement composites because of its outstanding mechanical
properties and its ability to close cracks at the nano level. The
experimental investigations for CNT reinforced cement is costly,
time consuming and involves huge number of trials. Mathematical
modeling of CNT reinforced cement can be done effectively and
efficiently to arrive at the mechanical properties and to reduce the
number of trials in the experiments. Hence, an attempt is made to
numerically study the effective mechanical properties of CNT
reinforced cement numerically using Representative Volume
Element (RVE) method. The enhancement in its mechanical
properties for different percentage of CNTs is studied in detail.
Abstract: The aim of this study is to find out and analyze the
role of gender and age on the perceptions of students to the distant
online program offered by Vocational High School in Sakarya
University. The research is based on a questionnaire as a mean of
data collection method to find out the role of age and gender on the
student-s perceptions toward online education, and the study
progressed through finding relationships between the variables used
in the data collection instrument. The findings of the analysis
revealed that although the students registered to the online program
by will, they preferred the traditional face-to-face education due to
the difficulty of the nonverbal communication, their incompetence of
using the technology required, and their belief in traditional face-toface
learning more than online education.
Regarding gender, the results showed that the female students
have a better perception of the online education as opposed to the
male students. Regarding age, the results showed that the older the
students are the more is their preference towards attending face-toface
classes.
Abstract: The 2008 Candlelight Protests of Korea was very
significant to portray the political environment among the South
Korean youth. Many challenges and new advanced technologies have
driven the youth community to be engaged in the political arena that
has shifted them from traditional Korean youth to a very greater
community. Due to historical perspective with the people of North
Korea, the young generation has embraced different view of ethnic
nationalism. This study examines the youth involvement in politics in
line with their level of acceptance the practice of democracy. The
increase usage of new media has shown great results in the survey
results whereby the youth used as a platform to gain political
information and brought higher degree of their sociopolitical interests
among them. Furthermore, the rise of nationalism and patriotism will
be discussed in this paper to the dynamism of the political approaches
used by the Korea government
Abstract: Breast skin-line estimation and breast segmentation is an important pre-process in mammogram image processing and computer-aided diagnosis of breast cancer. Limiting the area to be processed into a specific target region in an image would increase the accuracy and efficiency of processing algorithms. In this paper we are presenting a new algorithm for estimating skin-line and breast segmentation using fast marching algorithm. Fast marching is a partial-differential equation based numerical technique to track evolution of interfaces. We have introduced some modifications to the traditional fast marching method, specifically to improve the accuracy of skin-line estimation and breast tissue segmentation. Proposed modifications ensure that the evolving front stops near the desired boundary. We have evaluated the performance of the algorithm by using 100 mammogram images taken from mini-MIAS database. The results obtained from the experimental evaluation indicate that this algorithm explains 98.6% of the ground truth breast region and accuracy of the segmentation is 99.1%. Also this algorithm is capable of partially-extracting nipple when it is available in the profile.
Abstract: Knowledge bases are basic components of expert
systems or intelligent computational programs. Knowledge bases
provide knowledge, events that serve deduction activity,
computation and control. Therefore, researching and developing of
models for knowledge representation play an important role in
computer science, especially in Artificial Intelligence Science and
intelligent educational software. In this paper, the extensive
deduction computational model is proposed to design knowledge
bases whose attributes are able to be real values or functional values.
The system can also solve problems based on knowledge bases.
Moreover, the models and algorithms are applied to produce the
educational software for solving alternating current problems or
solving set of equations automatically.
Abstract: Many natural language expressions are ambiguous, and
need to draw on other sources of information to be interpreted.
Interpretation of the e word تعاون to be considered as a noun or a verb
depends on the presence of contextual cues. To interpret words we
need to be able to discriminate between different usages. This paper
proposes a hybrid of based- rules and a machine learning method for
tagging Arabic words. The particularity of Arabic word that may be
composed of stem, plus affixes and clitics, a small number of rules
dominate the performance (affixes include inflexional markers for
tense, gender and number/ clitics include some prepositions,
conjunctions and others). Tagging is closely related to the notion of
word class used in syntax. This method is based firstly on rules (that
considered the post-position, ending of a word, and patterns), and
then the anomaly are corrected by adopting a memory-based learning
method (MBL). The memory_based learning is an efficient method to
integrate various sources of information, and handling exceptional
data in natural language processing tasks. Secondly checking the
exceptional cases of rules and more information is made available to
the learner for treating those exceptional cases. To evaluate the
proposed method a number of experiments has been run, and in
order, to improve the importance of the various information in
learning.
Abstract: There are a number of different cars for transferring hundreds of close contacts of swine influenza patients to hospital, and we need to carefully assign the passengers to those cars in order to minimize the risk of influenza spreading during transportation. The paper presents an approach to straightforward obtain the optimal solution of the relaxed problems, and develops two iterative improvement algorithms to effectively tackle the general problem.
Abstract: Quantitative trait loci (QTL) experiments have yielded
important biological and biochemical information necessary for
understanding the relationship between genetic markers and
quantitative traits. For many years, most QTL algorithms only
allowed one observation per genotype. Recently, there has been an
increasing demand for QTL algorithms that can accommodate more
than one observation per genotypic distribution. The Bayesian
hierarchical model is very flexible and can easily incorporate this
information into the model. Herein a methodology is presented that
uses a Bayesian hierarchical model to capture the complexity of the
data. Furthermore, the Markov chain Monte Carlo model composition
(MC3) algorithm is used to search and identify important markers. An
extensive simulation study illustrates that the method captures the
true QTL, even under nonnormal noise and up to 6 QTL.
Abstract: The overall objective of this research is a strain
improvement technology for efficient pectinase production. A novel
cells cultivation technology by immobilization of fungal cells has
been studied in long time continuous fermentations. Immobilization
was achieved by using of new material for absorption of stores of
immobilized cultures which was for the first time used for
immobilization of microorganisms. Effects of various conditions of
nitrogen and carbon nutrition on the biosynthesis of pectolytic
enzymes in Aspergillus awamori 1-8 strain were studied. Proposed
cultivation technology along with optimization of media components
for pectinase overproduction led to increased pectinase productivity
in Aspergillus awamori 1-8 from 7 to 8 times. Proposed technology
can be applied successfully for production of major industrial
enzymes such as α-amylase, protease, collagenase etc.
Abstract: In mechanical and environmental engineering, mixed
convection is a frequently encountered thermal fluid phenomenon
which exists in atmospheric environment, urban canopy flows, ocean
currents, gas turbines, heat exchangers, and computer chip cooling
systems etc... . This paper deals with a numerical investigation of
mixed convection in a vertical heated channel. This flow results from
the mixing of the up-going fluid along walls of the channel with the
one issued from a flat nozzle located in its entry section. The fluiddynamic
and heat-transfer characteristics of vented vertical channels
are investigated for constant heat-flux boundary conditions, a
Rayleigh number equal to 2.57 1010, for two jet Reynolds number
Re=3 103 and 2104 and the aspect ratio in the 8-20 range. The system
of governing equations is solved with a finite volumes method and an
implicit scheme. The obtained results show that the turbulence and
the jet-wall interaction activate the heat transfer, as does the drive of
ambient air by the jet. For low Reynolds number Re=3 103, the
increase of the aspect Ratio enhances the heat transfer of about 3%,
however; for Re=2 104, the heat transfer enhancement is of about
12%. The numerical velocity, pressure and temperature fields are
post-processed to compute the quantities of engineering interest such
as the induced mass flow rate, and average Nusselt number, in terms
of Rayleigh, Reynolds numbers and dimensionless geometric
parameters are presented.
Abstract: This study explored the relationship between
occupational stress and the perceived effectiveness of men and
women managers in Ghanaian organizations. The exploration is
underlined by attempt to understand the degree to which male and
female managers in Ghanaian organizations experience occupational
stress at the workplace. The purpose is to examine the sources and
extents of occupational stress experienced by male and female
managers in Ghana. Data was collected using questionnaires and
analyzed using both descriptive statistics and correlation analysis.
The results showed that female managers in Ghana are more likely to
report of more stress experiences in the workplace than their male
counterparts. The female managers are more likely to perceive role
conflict and alienation as job stressors while the male managers
perceived blocked career as a major source of workplace stress. It is
concluded that despite the female managers experiencing enormous
level of occupational stress, there was no significant differences
between their managerial effectiveness and that of the male.
Abstract: Natural organic matter (NOM) is heterogeneous
mixture of organic compounds that enter the water media from
animal and plant remains, domestic and industrial wastes.
Researches showed that NOM is likely precursor material for
disinfection by products (DBPs). Chlorine very commenly used for
disinfection purposes and NOM and chlorine reacts then
Trihalomethane (THM) and Haloacetic acids (HAAs) which are
cancerogenics for human health are produced. The aim of the study is
to search NOM removal by enhanced coagulation from drinking
water source of Eskisehir which is supplied from Porsuk Dam.
Recently, Porsuk dam water is getting highly polluted and therefore
NOM concentration is increasing. Enhanced coagulation studies were
evaluated by measurement of Dissolved Organic Carbon (DOC), UV
absorbance at 254 nm (UV254), and different trihalomethane
formation potential (THMFP) tests. Results of jar test experiments
showed that NOM can be removed from water about 40-50 % of
efficiency by enhanced coagulation. Optimum coagulant type and
coagulant dosages were determined using FeCl3 and Alum.
Abstract: There are many sources trough which the soil get
enriched and contaminated with REEs. The determination of REEs in
environmental samples has been limited because of the lack of
sensitive analytical techniques. Soil samples were collected from
four sites including open cast coal mine, natural coal burning, coal
washery and control in the coal field located in Dhanbad, India.
Total concentrations of rare earth elements (REEs) were determined
using the inductively coupled plasma atomic absorption spectrometry
in order to assess enrichment status in the coal field. Results showed
that the mean concentrations of La, Pr, Eu, Tb, Ho, and Tm in open
cast mine and natural coal burning sites were elevated compared to
the reference concentrations, while Ce, Nd, Sm, and Gd were
elevated in coal washery site. When compared to reference soil,
heavy REEs (HREEs) were enriched in open cast mines and natural
coal burning affected soils, however, the HREEs were depleted in the
coal washery sites. But, the Chondrite-normalization diagram showed
significant enrichment for light REEs (LREEs) in all the soils. High
concentration of Pr, Eu, Tb, Ho, Tm, and Lu in coal mining and coal
burning sites may pose human health risks. Factor analysis showed
that distribution and relative abundance of REEs of the coal washery
site is comparable with the control. Eventually washing or cleaning
of coal could significantly decrease the emission of REEs from coal
into the environment.
Abstract: With the beginning of the new century, man still faces
many challenges in how to form and develop his urban environment. To meet these challenges, many cities have tried to develop its visual
image. This is by transforming their urban environment into a branded visual image; this is at the level of squares, the main roads, the borders, and the landmarks.
In this realm, the paper aims at activating the role of branded urban spaces as an approach for the development of visual image of cities, especially in Egypt. It concludes the need to recognize the importance of developing the visual image in Egypt, through directing the urban planners to the important role of such spaces in achieving sustainability.
Abstract: In-place sorting algorithms play an important role in many fields such as very large database systems, data warehouses, data mining, etc. Such algorithms maximize the size of data that can be processed in main memory without input/output operations. In this paper, a novel in-place sorting algorithm is presented. The algorithm comprises two phases; rearranging the input unsorted array in place, resulting segments that are ordered relative to each other but whose elements are yet to be sorted. The first phase requires linear time, while, in the second phase, elements of each segment are sorted inplace in the order of z log (z), where z is the size of the segment, and O(1) auxiliary storage. The algorithm performs, in the worst case, for an array of size n, an O(n log z) element comparisons and O(n log z) element moves. Further, no auxiliary arithmetic operations with indices are required. Besides these theoretical achievements of this algorithm, it is of practical interest, because of its simplicity. Experimental results also show that it outperforms other in-place sorting algorithms. Finally, the analysis of time and space complexity, and required number of moves are presented, along with the auxiliary storage requirements of the proposed algorithm.