Abstract: This research elaborates decision models for product
innovation in the early phases, focusing on one of the most widely
implemented method in marketing research: conjoint analysis and the
related conjoint-based models with special focus on heuristics
programming techniques for the development of optimal product
innovation. The concept, potential, requirements and limitations of
conjoint analysis and its conjoint-based heuristics successors are
analysed and the development of conceptual framework of Genetic
Algorithm (GA) as one of the most widely implemented heuristic
methods for developing product innovations are discussed.
Abstract: This study aimed to explore future life orientation and
support that needed to accomplish it. A total of 258 participants are
Javanese high school student. The age of the sample ranges from 14
to 18 years old. Participants were asked about their future aspiration,
their reason of choosing them as important goals in their life, and
support that they need to accomplished their goals using open ended
questionnaire. The responses were categorized through content
analysis into four main categories. They are: (1) Self Fulfillment
(72.1%) (2) Parents and Family (16.7%) (3) Altruism (8.1%) (4)
Social and Economy Status (3.1%). Meanwhile, the categories for
support that they needed are shown as follows: (1) Affection Support
(64.7%) (2) Spiritual support (17.4%) (3) Material Support (10.9%)
(4) Guidance Support (7.0%). The research found that affection
support always gets the highest number in every future orientation
categories. It can be concluded that although Javanese adolescents
have different future orientation, they basically need affection
support.
Abstract: The grey oyster mushroom, Pleurotus sajor-caju
(PSC), is a common edible mushroom and is now grown
commercially around the world for food. This fungus has been
broadly used as food or food ingredients in various food products for
a long time. To enhance the nutritional quality and sensory attributes
of bakery-based products, PSC powder is used in the present study to
partially replace wheat flour in baked product formulations. The
nutrient content and sensory properties of rice-porridge and
unleavened bread (paratha) incorporated with various levels of PSC
powder were studied. These food items were formulated with either
0%, 2%, 4% or 6% of PSC powder. Results show PSC powder
recorded β-glucan at 3.57g/100g. In sensory evaluation, consumers
gave higher score to both rice-porridge and paratha bread containing
2-4% PSC compared to those that are not added with PSC powder.
The paratha containing 4% PSC powder can be formulated with the
intention in improving overall acceptability of paratha bread.
Meanwhile, for rice-porridge, consumers prefer the formulated
product added with 4% PSC powder. In conclusion, the addition of
PSC powder to partially wheat flour can be recommended for the
purpose of enhancing nutritional composition and maintaining the
acceptability of carbohydrate-based products.
Abstract: The purpose of this article is to study the effects of
plants cover on overland flow and, therefore, its influences on the
amount of eroded and transported soil. In this investigation, all the
experiments were conducted in the LEGHYD laboratory using a
rainfall simulator and a soil tray. The experiments were conducted
using an experimental plot (soil tray) which is 2m long, 0.5 m wide
and 0.15 m deep. The soil used is an agricultural sandy soil (62,08%
coarse sand, 19,14% fine sand, 11,57% silt and 7,21% clay). Plastic
rods (4 mm in diameter) were used to simulate the plants at different
densities: 0 stem/m2 (bared soil), 126 stems/m², 203 stems/m², 461
stems/m² and 2500 stems/m²). The used rainfall intensity is 73mm/h
and the soil tray slope is fixed to 3°. The results have shown that the
overland flow velocities decreased with increasing stems density, and
the density cover has a great effect on sediment concentration.
Darcy–Weisbach and Manning friction coefficients of overland flow
increased when the stems density increased. Froude and Reynolds
numbers decreased with increasing stems density and, consequently,
the flow regime of all treatments was laminar and subcritical. From
these findings, we conclude that increasing the plants cover can
efficiently reduce soil loss and avoid denuding the roots plants.
Abstract: Grid computing provides a virtual framework for
controlled sharing of resources across institutional boundaries.
Recently, trust has been recognised as an important factor for
selection of optimal resources in a grid. We introduce a new method
that provides a quantitative trust value, based on the past interactions
and present environment characteristics. This quantitative trust value
is used to select a suitable resource for a job and eliminates run time
failures arising from incompatible user-resource pairs. The proposed
work will act as a tool to calculate the trust values of the various
components of the grid and there by improves the success rate of the
jobs submitted to the resource on the grid. The access to a resource
not only depend on the identity and behaviour of the resource but
also upon its context of transaction, time of transaction, connectivity
bandwidth, availability of the resource and load on the resource. The
quality of the recommender is also evaluated based on the accuracy
of the feedback provided about a resource. The jobs are submitted for
execution to the selected resource after finding the overall trust value
of the resource. The overall trust value is computed with respect to
the subjective and objective parameters.
Abstract: In this article the investigation about installation heat
recovery steam generation (HRSG) on the exhaust of turbo generators of phases 2&3 at South Pars Gas Complex is presented.
The temperature of exhaust gas is approximately 665 degree centigrade, Installation of heat recovery boiler was simulated in
ThermoFlow 17.0.2 software, based on test operation data and the
equipments site operation conditions in Pars exclusive economical energy area, the affect of installation HRSG package on the available
gas turbine and its operation parameters, ambient temperature, the
exhaust temperatures steam flow rate were investigated. Base on the results recommended HRSG package should have the capacity for 98
ton per hour high pressure steam generation this refinery, by use of
exhaust of three gas turbines for each package in operation condition of each refinery at 30 degree centigrade. Besides saving energy this
project will be an Environment-Friendly project. The Payback Period
is estimated approximately 1.8 year, with considering Clean Development Mechanism.
Abstract: One problem in evaluating recent computational models of human category learning is that there is no standardized method for systematically comparing the models' assumptions or hypotheses. In the present study, a flexible general model (called GECLE) is introduced that can be used as a framework to systematically manipulate and compare the effects and descriptive validities of a limited number of assumptions at a time. Two example simulation studies are presented to show how the GECLE framework can be useful in the field of human high-order cognition research.
Abstract: Although White LED lighting systems powered by solar cells have presented for many years, they are not widely used in today application because of their cost and low energy conversion efficiency. The proposed system use the dc power generated by fixed solar cells module to energize White LED light sources that are operated by directly connected White LED with current limitation resistors, resulting in much more power consumption. This paper presents the use of white LED as a general lighting application powered by tracking solar cells module and using pulse to apply the electrical power to the White LED. These systems resulted in high efficiency power conversion, low power consumption, and long light of the white LED.
Abstract: In this paper an ant colony optimization algorithm is
developed to solve the permutation flow shop scheduling problem. In
the permutation flow shop scheduling problem which has been vastly
studied in the literature, there are a set of m machines and a set of n
jobs. All the jobs are processed on all the machines and the sequence
of jobs being processed is the same on all the machines. Here this
problem is optimized considering two criteria, makespan and total
flow time. Then the results are compared with the ones obtained by
previously developed algorithms. Finally it is visible that our
proposed approach performs best among all other algorithms in the
literature.
Abstract: Tomato powder has good potential as substitute of tomato paste and other tomato products. In order to protect physicochemical properties and nutritional quality of tomato during dehydration process, investigation was carried out using different drying methods and pretreatments. Solar drier and continuous conveyor (tunnel) drier were used for dehydration where as calcium chloride (CaCl2), potassium metabisulphite (KMS), calcium chloride and potassium metabisulphite (CaCl2 +KMS), and sodium chloride (NaCl) selected for treatment.. lycopene content, dehydration ratio, rehydration ratio and non-enzymatic browning in addition to moisture, sugar and titrable acidity were studied. Results show that pre-treatment with CaCl2 and NaCl increased water removal and moisture mobility in tomato slices during drying of tomatoes. Where CaCl2 used along with KMS the NEB was recorded the least compared to other treatments and the best results were obtained while using the two chemicals in combination form. Storage studies in LDPE polymeric and metalized polyesters films showed less changes in the products packed in metallized polyester pouches and even after 6 months lycopene content did not decrease more than 20% as compared to the control sample and provide extension of shelf life in acceptable condition for 6 months. In most of the quality characteristics tunnel drier samples presented better values in comparison to solar drier.
Abstract: The evolution of silica optical fiber strength aged in cetyltrimethylammonium chloride solution (CTAC) has been investigated. If the solution containing surfactants presents appreciable changes in physical and chemical properties at the critical micelle concentration (CMC), a non negligible mechanical behavior fiber change is observed for silica fiber aged in cationic surfactants as CTAC which can lead to optical fiber reliability questioning. The purpose of this work is to study the mechanical behavior of silica coated and naked optical fibers in contact with CTAC solution at different concentrations. Result analysis proves that the immersion in CTAC drastically decreases the fiber strength and specially near the CMC point. Beyond CMC point, a small increase of fiber strength is analyzed and commented.
Abstract: The world of wireless telecommunications is rapidly evolving. Technologies under research and development promise to deliver more services to more users in less time. This paper presents the emerging technologies helping wireless systems grow from where we are today into our visions of the future. This paper will cover the applications and characteristics of emerging wireless technologies: Wireless Local Area Networks (WiFi-802.11n), Wireless Personal Area Networks (ZigBee) and Wireless Metropolitan Area Networks (WiMAX). The purpose of this paper is to explain the impending 802.11n standard and how it will enable WLANs to support emerging media-rich applications. The paper will also detail how 802.11n compares with existing WLAN standards and offer strategies for users considering higher-bandwidth alternatives. The emerging IEEE 802.15.4 (ZigBee) standard aims to provide low data rate wireless communications with high-precision ranging and localization, by employing UWB technologies for a low-power and low cost solution. WiMAX (Worldwide Interoperability for Microwave Access) is a standard for wireless data transmission covering a range similar to cellular phone towers. With high performance in both distance and throughput, WiMAX technology could be a boon to current Internet providers seeking to become the leader of next generation wireless Internet access. This paper also explores how these emerging technologies differ from one another.
Abstract: The contact width is important design parameter for
optimizing the design of new metal gasket for asbestos substitution
gasket. The contact width is found have relationship with the helium
leak quantity. In the increasing of axial load value, the helium leak
quantity is decreasing and the contact width is increasing. This study
provides validity method using simulation analysis and the result is
compared to experimental using pressure sensitive paper. The results
denote similar trend data between simulation and experimental result.
Final evaluation is determined by helium leak quantity to check
leakage performance of gasket design. Considering the phenomena of
position change on the convex contact, it can be developed the
optimization of gasket design by increasing contact width.
Abstract: Emotion recognition is an important research field that finds lots of applications nowadays. This work emphasizes on recognizing different emotions from speech signal. The extracted features are related to statistics of pitch, formants, and energy contours, as well as spectral, perceptual and temporal features, jitter, and shimmer. The Artificial Neural Networks (ANN) was chosen as the classifier. Working on finding a robust and fast ANN classifier suitable for different real life application is our concern. Several experiments were carried out on different ANN to investigate the different factors that impact the classification success rate. Using a database containing 7 different emotions, it will be shown that with a proper and careful adjustment of features format, training data sorting, number of features selected and even the ANN type and architecture used, a success rate of 85% or even more can be achieved without increasing the system complicity and the computation time
Abstract: Organ motion, especially respiratory motion, is a technical challenge to radiation therapy planning and dosimetry. This motion induces displacements and deformation of the organ tissues within the irradiated region which need to be taken into account when simulating dose distribution during treatment. Finite element modeling (FEM) can provide a great insight into the mechanical behavior of the organs, since they are based on the biomechanical material properties, complex geometry of organs, and anatomical boundary conditions. In this paper we present an original approach that offers the possibility to combine image-based biomechanical models with particle transport simulations. We propose a new method to map material density information issued from CT images to deformable tetrahedral meshes. Based on the principle of mass conservation our method can correlate density variation of organ tissues with geometrical deformations during the different phases of the respiratory cycle. The first results are particularly encouraging, as local error quantification of density mapping on organ geometry and density variation with organ motion are performed to evaluate and validate our approach.
Abstract: There are many problems associated with the World Wide
Web: getting lost in the hyperspace; the web content is still accessible only
to humans and difficulties of web administration. The solution to these
problems is the Semantic Web which is considered to be the extension
for the current web presents information in both human readable and
machine processable form. The aim of this study is to reach new
generic foundation architecture for the Semantic Web because there
is no clear architecture for it, there are four versions, but still up to
now there is no agreement for one of these versions nor is there a
clear picture for the relation between different layers and
technologies inside this architecture. This can be done depending on
the idea of previous versions as well as Gerber-s evaluation method
as a step toward an agreement for one Semantic Web architecture.
Abstract: This study focuses on the development of triangular fuzzy numbers, the revising of triangular fuzzy numbers, and the constructing of a HCFN (half-circle fuzzy number) model which can be utilized to perform more plural operations. They are further transformed for trigonometric functions and polar coordinates. From half-circle fuzzy numbers we can conceive cylindrical fuzzy numbers, which work better in algebraic operations. An example of fuzzy control is given in a simulation to show the applicability of the proposed half-circle fuzzy numbers.
Abstract: The aim of this study was to examine current levels of physical activity determined via heart rate monitoring. A total of 176 children (85 boys, 91 girls) aged 5-13 years wore sealed Polar heart rate monitors for at least 10 hours per day on at least 3 days. Mean daily minutes of moderate to vigorous-intensity physical activity was 65 ± 43 (mean ± SD) for boys and 54 ± 37 for girls. Daily minutes of vigorous-intensity activity was 31 ± 24 and 24 ± 21 for boys and girls respectively. Significant differences in physical activity levels were observed between school day and weekends, boys and girls, and among age and geographical groups. Only 36% of boys and 22% of girls met the New Zealand physical activity guideline. This research indicates that a large proportion of New Zealand children are not meeting physical activity recommendations.
Abstract: This essay endeavors to read Ama Ata Aidoo-s Our Sister Killjoy with a postocolonially-inflected consciousness. It aims at demonstrating how her work could be read as a sophisticated postcolonial revision of the colonial travel narrative whereby the protagonist-s black-eyed squint operates as 'the all-seeing-eye' to subvert the historically unbroken legacy of the Orientalist ideology. It tries to demonstrate how Sissie assumes authority and voice in an act that destabilizes the traditionally established modes of western representation. It is also an investigation into how Aidoo-s text adopts processes which disengage the Eurocentric view produced by the discursive itineraries of western institutions through diverse acts of resistance and 'various strategies of subversion and appropriation'. Her counter discursive strategies of resistance are shaped up in various ways by a feminist consciousness that attempts to articulate a distinct African version of identity and preserve cultural distinctiveness.
Abstract: We analyze the problem of decision making under
ignorance with regrets. Recently, Yager has developed a new method
for decision making where instead of using regrets he uses another
type of transformation called negrets. Basically, the negret is
considered as the dual of the regret. We study this problem in detail
and we suggest the use of geometric aggregation operators in this
method. For doing this, we develop a different method for
constructing the negret matrix where all the values are positive. The
main result obtained is that now the model is able to deal with
negative numbers because of the transformation done in the negret
matrix. We further extent these results to another model developed
also by Yager about mixing valuations and negrets. Unfortunately, in
this case we are not able to deal with negative numbers because the
valuations can be either positive or negative.