Abstract: A numerical study has been carried out to investigate
the heat transfer by natural convection of nanofluid taking Cu as
nanoparticles and the water as based fluid in a three dimensional
annulus enclosure filled with porous media (silica sand) between two
horizontal concentric cylinders with 12 annular fins of 2.4mm
thickness attached to the inner cylinder under steady state conditions.
The governing equations which used are continuity, momentum and
energy equations under an assumptions used Darcy law and
Boussinesq-s approximation which are transformed to dimensionless
equations. The finite difference approach is used to obtain all the
computational results using the MATLAB-7. The parameters affected
on the system are modified Rayleigh number (10 ≤Ra*≤ 1000), fin
length Hf (3, 7 and 11mm), radius ratio Rr (0.293, 0.365 and 0.435)
and the volume fraction(0 ≤ ¤ò ≤ 0 .35). It was found that the
average Nusselt number depends on (Ra*, Hf, Rr and φ). The results
show that, increasing of fin length decreases the heat transfer rate and
for low values of Ra*, decreasing Rr cause to decrease Nu while for
Ra*
greater than 100, decreasing Rr cause to increase Nu and adding
Cu nanoparticles with 0.35 volume fraction cause 27.9%
enhancement in heat transfer. A correlation for Nu in terms of Ra*,
Hf and φ, has been developed for inner hot cylinder.
Abstract: Data stream analysis is the process of computing
various summaries and derived values from large amounts of data
which are continuously generated at a rapid rate. The nature of a
stream does not allow a revisit on each data element. Furthermore,
data processing must be fast to produce timely analysis results. These
requirements impose constraints on the design of the algorithms to
balance correctness against timely responses. Several techniques
have been proposed over the past few years to address these
challenges. These techniques can be categorized as either dataoriented
or task-oriented. The data-oriented approach analyzes a
subset of data or a smaller transformed representation, whereas taskoriented
scheme solves the problem directly via approximation
techniques. We propose a hybrid approach to tackle the data stream
analysis problem. The data stream has been both statistically
transformed to a smaller size and computationally approximated its
characteristics. We adopt a Monte Carlo method in the approximation
step. The data reduction has been performed horizontally and
vertically through our EMR sampling method. The proposed method
is analyzed by a series of experiments. We apply our algorithm on
clustering and classification tasks to evaluate the utility of our
approach.
Abstract: Wavelet transform provides several important
characteristics which can be used in a texture analysis and
classification. In this work, an efficient texture classification method,
which combines concepts from wavelet and co-occurrence matrices,
is presented. An Euclidian distance classifier is used to evaluate the
various methods of classification. A comparative study is essential to
determine the ideal method. Using this conjecture, we developed a
novel feature set for texture classification and demonstrate its
effectiveness
Abstract: This paper presents a new spread-spectrum
watermarking algorithm for digital images in discrete wavelet
transform (DWT) domain. The algorithm is applied for embedding
watermarks like patient identification /source identification or
doctors signature in binary image format into host digital
radiological image for potential telemedicine applications.
Performance of the algorithm is analysed by varying the gain factor,
subband decomposition levels, and size of watermark. Simulation
results show that the proposed method achieves higher watermarking
capacity.
Abstract: This paper is concerned with motion recognition based fuzzy WP(Wavelet Packet) feature extraction approach from Vicon physical data sets. For this purpose, we use an efficient fuzzy mutual-information-based WP transform for feature extraction. This method estimates the required mutual information using a novel approach based on fuzzy membership function. The physical action data set includes 10 normal and 10 aggressive physical actions that measure the human activity. The data have been collected from 10 subjects using the Vicon 3D tracker. The experiments consist of running, seating, and walking as physical activity motion among various activities. The experimental results revealed that the presented feature extraction approach showed good recognition performance.
Abstract: The inability to implement the principles of good
corporate governance (GCG) as demonstrated in the surveys is due to
a number of constraints which can be classified into three; namely internal constraints, external constraints, and constraints coming
from the structure of ownership. The issues in the internal constraints
mentioned are related to the function of several elements of the company. As a business organization, corporation is unable to
achieve its goal to successfully implement GCG principles since it is
not support by its internal elements- functions. Two of several numbers of internal elements of a company are ethical work climate
and leadership style of the top management.
To prove the correlation between internal function of organization
(in this case ethical work climate and transformational leadership)
and the successful implementation of GCG principles, this study
proposes two hypotheses to be empirically tested on thirty surveyed organizations; eleven of which are state-owned companies and
nineteen are private companies. These thirty corporations are listed in
the Jakarta Stock Exchange. All state-owned companies in the
samples are those which have been privatized.
The research showed that internal function of organization give
support to the successful implementation of GCG principle. In this
research we can prove that : (i) ethical work climate has positive
significance of correlation with the successful implementation of
social awareness principle (one of principles on GCG) and, (ii) only
at the state-owned companies, transformational leadership have
positive significance effect to forming the ethical work climate.
Abstract: To successfully provide a fast FIR filter with FTT algorithms, overlapped-save algorithms can be used to lower the computational complexity and achieve the desired real-time processing. As the length of the input block increases in order to improve the efficiency, a larger volume of zero padding will greatly increase the computation length of the FFT. In this paper, we use the overlapped block digital filtering to construct a parallel structure. As long as the down-sampling (or up-sampling) factor is an exact multiple lengths of the impulse response of a FIR filter, we can process the input block by using a parallel structure and thus achieve a low-complex fast FIR filter with overlapped-save algorithms. With a long filter length, the performance and the throughput of the digital filtering system will also be greatly enhanced.
Abstract: In this paper we present a new method for coin
identification. The proposed method adopts a hybrid scheme using
Eigenvalues of covariance matrix, Circular Hough Transform (CHT)
and Bresenham-s circle algorithm. The statistical and geometrical
properties of the small and large Eigenvalues of the covariance
matrix of a set of edge pixels over a connected region of support are
explored for the purpose of circular object detection. Sparse matrix
technique is used to perform CHT. Since sparse matrices squeeze
zero elements and contain only a small number of non-zero elements,
they provide an advantage of matrix storage space and computational
time. Neighborhood suppression scheme is used to find the valid
Hough peaks. The accurate position of the circumference pixels is
identified using Raster scan algorithm which uses geometrical
symmetry property. After finding circular objects, the proposed
method uses the texture on the surface of the coins called texton,
which are unique properties of coins, refers to the fundamental micro
structure in generic natural images. This method has been tested on
several real world images including coin and non-coin images. The
performance is also evaluated based on the noise withstanding
capability.
Abstract: In this paper in consideration of each available
techniques deficiencies for speech recognition, an advanced method
is presented that-s able to classify speech signals with the high
accuracy (98%) at the minimum time. In the presented method, first,
the recorded signal is preprocessed that this section includes
denoising with Mels Frequency Cepstral Analysis and feature
extraction using discrete wavelet transform (DWT) coefficients; Then
these features are fed to Multilayer Perceptron (MLP) network for
classification. Finally, after training of neural network effective
features are selected with UTA algorithm.
Abstract: The present paper considers the steady free
convection boundary layer flow of a viscoelastics fluid with constant
temperature in the presence of heat generation. The boundary layer
equations are an order higher than those for the Newtonian (viscous)
fluid and the adherence boundary conditions are insufficient to
determine the solution of these equations completely. The governing
boundary layer equations are first transformed into non-dimensional
form by using special dimensionless group. Computations are
performed numerically by using Keller-box method by augmenting
an extra boundary condition at infinity and the results are displayed
graphically to illustrate the influence of viscoelastic K, heat
generation γ , and Prandtl Number, Pr parameters on the velocity
and temperature profiles. The results of the surface shear stress in
terms of the local skin friction and the surface rate of heat transfer in
terms of the local Nusselt number for a selection of the heat
generation parameterγ (=0.0, 0.2, 0.5, 0.8, 1.0) are obtained and
presented in both tabular and graphical formats. Without effect of the
internal heat generation inside the fluid domain for which we take
γ = 0.0, the present numerical results show an excellent agreement
with previous publication.
Abstract: In this study, we used a two-stage process and
potassium hydroxide (KOH) to transform waste biomass (rice straw)
into activated carbon and then evaluated the adsorption capacity of the
waste for removing carbofuran from an aqueous solution. Activated
carbon was fast and effective for the removal of carbofuran because of
its high surface area. The native and carbofuran-loaded adsorbents
were characterized by elemental analysis. Different adsorption
parameters, such as the initial carbofuran concentration, contact time,
temperature and pH for carbofuran adsorption, were studied using a
batch system. This study demonstrates that rice straw can be very
effective in the adsorption of carbofuran from bodies of water.
Abstract: This current research focused on development of degradable starch based packaging film with enhanced mechanical properties. A series of low density polyethylene (LDPE)/tapioca starch compounds with various tapioca starch contents were prepared by twin screw extrusion with the addition of maleic anhydride grafted polyethylene as compatibilizer. Palm cooking oil was used as processing aid to ease the blown film process, thus, degradable film can be processed via conventional blown film machine. Studies on their characteristics, mechanical properties and biodegradation were carried out by Fourier Transform Infrared (FTIR) spectroscopy and optical properties, tensile test and exposure to fungi environment respectively. The presence of high starch contents had an adverse effect on the tensile properties of LDPE/tapioca starch blends. However, the addition of compatibilizer to the blends improved the interfacial adhesion between the two materials, hence, improved the tensile properties of the films. High content of starch amount also was found to increase the rate of biodegradability of LDPE/tapioca starch films. It can be proved by exposure of the film to fungi environment. A growth of microbes colony can be seen on the surface of LDPE/tapioca starch film indicates that the granular starch present on the surface of the polymer film is attacked by microorganisms, until most of it is assimilated as a carbon source.
Abstract: An efficient parallel form in digital signal processor can improve the algorithm performance. The butterfly structure is an important role in fast Fourier transform (FFT), because its symmetry form is suitable for hardware implementation. Although it can perform a symmetric structure, the performance will be reduced under the data-dependent flow characteristic. Even though recent research which call as novel memory reference reduction methods (NMRRM) for FFT focus on reduce memory reference in twiddle factor, the data-dependent property still exists. In this paper, we propose a parallel-computing approach for FFT implementation on digital signal processor (DSP) which is based on data-independent property and still hold the property of low-memory reference. The proposed method combines final two steps in NMRRM FFT to perform a novel data-independent structure, besides it is very suitable for multi-operation-unit digital signal processor and dual-core system. We have applied the proposed method of radix-2 FFT algorithm in low memory reference on TI TMSC320C64x DSP. Experimental results show the method can reduce 33.8% clock cycles comparing with the NMRRM FFT implementation and keep the low-memory reference property.
Abstract: This paper presents a set of guidelines for the design
of multi-user awareness systems. In a first step, general requirements
for team awareness systems are analyzed. In the second part of the
paper, the identified requirements are aggregated and transformed
into concrete design guidelines for the development of team
awareness systems.
Abstract: In this paper, periodic force operation of a wastewater treatment process has been studied for the improved process performance. A previously developed dynamic model for the process is used to conduct the performance analysis. The static version of the model was utilized first to determine the optimal productivity conditions for the process. Then, feed flow rate in terms of dilution rate i.e. (D) is transformed into sinusoidal function. Nonlinear model predictive control algorithm is utilized to regulate the amplitude and period of the sinusoidal function. The parameters of the feed cyclic functions are determined which resulted in improved productivity than the optimal productivity under steady state conditions. The improvement in productivity is found to be marginal and is satisfactory in substrate conversion compared to that of the optimal condition and to the steady state condition, which corresponds to the average value of the periodic function. Successful results were also obtained in the presence of modeling errors and external disturbances.
Abstract: Non-Destructive evaluation of in-service power
transformer condition is necessary for avoiding catastrophic failures.
Dissolved Gas Analysis (DGA) is one of the important methods.
Traditional, statistical and intelligent DGA approaches have been
adopted for accurate classification of incipient fault sources.
Unfortunately, there are not often enough faulty patterns required for
sufficient training of intelligent systems. By bootstrapping the
shortcoming is expected to be alleviated and algorithms with better
classification success rates to be obtained. In this paper the
performance of an artificial neural network, K-Nearest Neighbour
and support vector machine methods using bootstrapped data are
detailed and shown that while the success rate of the ANN algorithms
improves remarkably, the outcome of the others do not benefit so
much from the provided enlarged data space. For assessment, two
databases are employed: IEC TC10 and a dataset collected from
reported data in papers. High average test success rate well exhibits
the remarkable outcome.
Abstract: Breast cancer detection techniques have been reported
to aid radiologists in analyzing mammograms. We note that most
techniques are performed on uncompressed digital mammograms.
Mammogram images are huge in size necessitating the use of
compression to reduce storage/transmission requirements. In this
paper, we present an algorithm for the detection of
microcalcifications in the JPEG2000 domain. The algorithm is based
on the statistical properties of the wavelet transform that the
JPEG2000 coder employs. Simulation results were carried out at
different compression ratios. The sensitivity of this algorithm ranges
from 92% with a false positive rate of 4.7 down to 66% with a false
positive rate of 2.1 using lossless compression and lossy compression
at a compression ratio of 100:1, respectively.
Abstract: A. niger XP isolated from Vietnam produces very low amount of acidic phytase with optimal pH at 2.5 and 5.5. The phytase production of this strain was successfully improved through gene cloning and expression. A 1.4 - kb DNA fragment containing the coding region of the phyA gene was amplified by PCR and inserted into the expression vector pPICZαA with a signal peptide α- factor, under the control of AOX1 promoter. The recombined plasmid was transformed into the host strain P. pastoris KM71H and X33 by electroporation. Both host strains could efficiently express and secret phytase. The multicopy strains were screened for over expression of phytase. All the selected multicopy strains of P. pastoris X33 were examined for phytase activity, the maximum phytase yield of 1329 IU/ml was obtained after 4 days of incubation in medium BMM. The recombinant protein with MW of 97.4 KW showed to be the only one protein secreted in the culture broth. Multicopy transformant P. pastoris X33 supposed to be potential candidate for producing the commercial preparation of phytase.
Abstract: Sustainability in rural production system can only be achieved if it can suitably satisfy the local requirement as well as the outside demand with the changing time. With the increased pressure from the food sector in a globalised world, the agrarian economy
needs to re-organise its cultivable land system to be compatible with new management practices as well as the multiple needs of various stakeholders and the changing resource scenario. An attempt has been made to transform this problem into a multi-objective decisionmaking problem considering various objectives, resource constraints and conditional constraints. An interactive fuzzy multi-objective
programming approach has been used for such a purpose taking a
case study in Indian context to demonstrate the validity of the method.
Abstract: In this paper, we propose an improved 3D star skeleton
technique, which is a suitable skeletonization for human posture representation
and reflects the 3D information of human posture.
Moreover, the proposed technique is simple and then can be performed
in real-time. The existing skeleton construction techniques, such as
distance transformation, Voronoi diagram, and thinning, focus on the
precision of skeleton information. Therefore, those techniques are not
applicable to real-time posture recognition since they are computationally
expensive and highly susceptible to noise of boundary. Although
a 2D star skeleton was proposed to complement these problems,
it also has some limitations to describe the 3D information of the
posture. To represent human posture effectively, the constructed skeleton
should consider the 3D information of posture. The proposed 3D
star skeleton contains 3D data of human, and focuses on human action
and posture recognition. Our 3D star skeleton uses the 8 projection
maps which have 2D silhouette information and depth data of human
surface. And the extremal points can be extracted as the features of 3D
star skeleton, without searching whole boundary of object. Therefore,
on execution time, our 3D star skeleton is faster than the “greedy" 3D
star skeleton using the whole boundary points on the surface. Moreover,
our method can offer more accurate skeleton of posture than the
existing star skeleton since the 3D data for the object is concerned.
Additionally, we make a codebook, a collection of representative 3D
star skeletons about 7 postures, to recognize what posture of constructed
skeleton is.