Abstract: All over the world, including the Middle and East
European countries, sustainable tillage and sowing technologies are
applied increasingly broadly with a view to optimising soil resources,
mitigating soil degradation processes, saving energy resources,
preserving biological diversity, etc. As a result, altered conditions of
tillage and sowing technological processes are faced inevitably. The
purpose of this study is to determine the seedbed topsoil hardness
when using a combined sowing coulter in different sustainable tillage
technologies. The research involved a combined coulter consisting
of two dissected blade discs and a shoe coulter. In order to determine
soil hardness at the seedbed area, a multipenetrometer was used. It
was found by experimental studies that in loosened soil, a combined
sowing coulter equally suppresses the furrow bottom, walls and soil
near the furrow; therefore, here, soil hardness was similar at all
researched depths and no significant differences were established. In
loosened and compacted (double-rolled) soil, the impact of a
combined coulter on the hardness of seedbed soil surface was more
considerable at a depth of 2 mm. Soil hardness at the furrow bottom
and walls to a distance of up to 26 mm was 1.1 MPa. At a depth of 10
mm, the greatest hardness was established at the furrow bottom. In
loosened and heavily compacted (rolled for 6 times) soil, at a depth
of 2 and 10 mm a combined coulter most of all compacted the furrow
bottom, which has a hardness of 1.8 MPa. At a depth of 20 mm, soil
hardness within the whole investigated area varied insignificantly and
fluctuated by around 2.0 MPa. The hardness of furrow walls and soil
near the furrow was by approximately 1.0 MPa lower than that at the
furrow bottom
Abstract: The quality and shelf life of foods of containing lipids (fats and oils) significantly reduces due to rancidity.Applications of natural antioxidants are one of the most effective manners to prevent the oxidation of oils and lipids. The antioxidant properties of juice extracted from barberry fruit (Berberris vulgaris.L) using maceration and SWE (10 bars and 120 - 180°C) methods were investigated and compared with conventional method. The amount of phenolic compound and reduction power of all samples were determined and the data were statistically analyzed using multifactor design. The results showed that the total amount of phenolic compound increased with increasing of pressure and temprature from 1861.9 to 2439.1 (mg Gallic acid /100gr Dry matter). The ability of reduction power of SWE obtained antioxidant extract compared with BHA (synthetic antioxidant) and ascorbic acid (natural antioxidant). There were significant differences among reduction power of extracts and there were remarkable difference with BHA and Ascorbic acid (P
Abstract: This article presents the developments of efficient
algorithms for tablet copies comparison. Image recognition has
specialized use in digital systems such as medical imaging,
computer vision, defense, communication etc. Comparison between
two images that look indistinguishable is a formidable task. Two
images taken from different sources might look identical but due to
different digitizing properties they are not. Whereas small variation
in image information such as cropping, rotation, and slight
photometric alteration are unsuitable for based matching
techniques. In this paper we introduce different matching
algorithms designed to facilitate, for art centers, identifying real
painting images from fake ones. Different vision algorithms for
local image features are implemented using MATLAB. In this
framework a Table Comparison Computer Tool “TCCT" is
designed to facilitate our research. The TCCT is a Graphical Unit
Interface (GUI) tool used to identify images by its shapes and
objects. Parameter of vision system is fully accessible to user
through this graphical unit interface. And then for matching, it
applies different description technique that can identify exact
figures of objects.
Abstract: Potato is one of the main components of warm meals in Latvia. Consumption of fried potatoes in Latvia is the highest comparing to Nordic and other Baltic countries. Therefore acrylamide (AA) intake coming from fried potatoes in population might be high as well. The aim of the research was to determine AA content in traditionally cooked potatoes bred and cultivated in Latvia. Five common Latvian potato varieties were selected: Lenora, Brasla, Imanta, Zile and Madara. A two-year research was conducted during two periods: just after harvesting and after six months of storage. The following cooking methods were used: shallow frying (150 ± 5 °C); deep-fat frying (180 ± 5 °C) and roasting (210 ± 5 °C). Time and temperature was recorded during frying. AA was extracted from potatoes by solid phase extraction and AA content was determined by LC-MS/MS. AA content significantly differs (p
Abstract: In this paper we propose a Multiple Description Image Coding(MDIC) scheme to generate two compressed and balanced rates descriptions in the wavelet domain (Daubechies biorthogonal (9, 7) wavelet) using pairwise correlating transform optimal and application method for Generalized Multiple Description Coding (GMDC) to image coding in the wavelet domain. The GMDC produces statistically correlated streams such that lost streams can be estimated from the received data. Our performance test shown that the proposed method gives more improvement and good quality of the reconstructed image when the wavelet coefficients are normalized by Gaussian Scale Mixture (GSM) model then the Gaussian one ,.
Abstract: The increasing demand for sufficient and clean
energy forces industrial and service companies to align their strategies towards efficient consumption. This trend refers also to the
residential building sector. There, large amounts of energy consumption are caused by house and facility heating. Many of the
operated hot water heating systems lack hydraulic balanced working
conditions for heat distribution and –transmission and lead to
inefficient heating. Through hydraulic balancing of heating systems,
significant energy savings for primary and secondary energy can be
achieved. This paper addresses the use of KNX-technology (Smart
Buildings) in residential buildings to ensure a dynamic adaption of
hydraulic system's performance, in order to increase the heating
system's efficiency. In this paper, the procedure of heating system
segmentation into hydraulically independent units (meshes) is
presented. Within these meshes, the heating valve are addressed and
controlled by a central facility server. Feasibility criteria towards
such drivers will be named. The dynamic hydraulic balance is
achieved by positioning these valves according to heating loads, that
are generated from the temperature settings in the corresponding
rooms. The energetic advantages of single room heating control
procedures, based on the application FacilityManager, is presented.
Abstract: With the advance of information technology in the
new era the applications of Internet to access data resources has
steadily increased and huge amount of data have become accessible
in various forms. Obviously, the network providers and agencies,
look after to prevent electronic attacks that may be harmful or may
be related to terrorist applications. Thus, these have facilitated the
authorities to under take a variety of methods to protect the special
regions from harmful data. One of the most important approaches is
to use firewall in the network facilities. The main objectives of
firewalls are to stop the transfer of suspicious packets in several
ways. However because of its blind packet stopping, high process
power requirements and expensive prices some of the providers are
reluctant to use the firewall. In this paper we proposed a method to
find a discriminate function to distinguish between usual packets and
harmful ones by the statistical processing on the network router logs.
By discriminating these data, an administrator may take an approach
action against the user. This method is very fast and can be used
simply in adjacent with the Internet routers.
Abstract: The present paper aims to present the significant role that the concept of governance can play in order to combine naturals resources as useful funding basis for the formation of a stable and effective welfare state model. The combination of those two different fields aims to represent the modern trends of our era as the means to solve the severe financial and economic issues caused mostly due to the malfunction of the welfare state and its public sector. European Union and Asian countries (especially China) are the main areas of interest since EU experiences a fiscal and economic crisis while China rules the area of the natural resources exploiting 97% of rare earths elements worldwide.
Abstract: The present microfluidic study is emphasizing the flow behavior within a Y shape micro-bifurcation in two similar flow configurations. We report here a numerical and experimental investigation on the velocity profiles evolution and secondary flows, manifested at different Reynolds numbers (Re) and for two different boundary conditions. The experiments are performed using special designed setup based on optical microscopic devices. With this setup, direct visualizations and quantitative measurements of the path-lines are obtained. A Micro-PIV measurement system is used to obtain velocity profiles distributions in a spatial evolution in the main flows domains. The experimental data is compared with numerical simulations performed with commercial computational code FLUENT in a 3D geometry with the same dimensions as the experimental one. The numerical flow patterns are found to be in good agreement with the experimental manifestations.
Abstract: Leptospirosis occurs worldwide (except the
poles of the earth), urban and rural areas, developed and
developing countries, especially in Thailand. It can be
transmitted to the human by rats through direct and indirect
ways. Human can be infected by either touching the infected rats
or contacting with water, soil containing urine from the infected
rats through skin, eyes and nose. The data of the people who
are infected with this disease indicates that most of the
patients are adults. The transmission of this disease is studied
through mathematical model. The population is separated into human
and rat. The human is divided into two classes, namely juvenile
and adult. The model equation is constructed for each class. The
standard dynamical modeling method is then used for
analyzing the behaviours of solutions. In addition, the
conditions of the parameters for the disease free and endemic
states are obtained. Numerical solutions are shown to support the
theoretical predictions. The results of this study guide the way to
decrease the disease outbreak.
Abstract: The photochemical and photo-Fenton oxidation of 1,3-dichloro-2-propanol was performed in a batch reactor, at room temperature, using UV radiation, H2O2 as oxidant, and Fenton-s reagent. The effect of the oxidative agent-s initial concentration was investigated as well as the effect of the initial concentration of Fe(II) by following the target compound degradation, the total organic carbon removal and the chloride ion production. Also, from the kinetic analysis conducted and proposed reaction scheme it was deduced that the addition of Fe(II) significantly increases the production and the further oxidation of the chlorinated intermediates.
Abstract: Today, the working areas put forward the administration of change. In order to provide this; it is required from the organizations to be creative. Professional creativity in offices depends on an environment that enables the development of the organization only after the individual or collective exertions within the organization. By providing this environment, the organization will gain efficiency, productivity, and work pleasure. In order to bring up the workforce appropriate to the related expectations, the professional creativity of the office management and secretarial profession candidates should be evaluated, education programs appropriate to this and related directly with the service quality should be prepared and the future of this profession should be directed. The aim of this study is to ensure the attention to improve the prepared education program as well as the creative thoughts and their applications, when carrying out an office management and secretarial training. 144 students took place in this research and a questionnaire of 48 questions was carried out.
Abstract: The human head representations usually are based on
the morphological – structural components of a real model. Over the
time became more and more necessary to achieve full virtual models
that comply very rigorous with the specifications of the human
anatomy. Still, making and using a model perfectly fitted with the
real anatomy is a difficult task, because it requires large hardware
resources and significant times for processing. That is why it is
necessary to choose the best compromise solution, which keeps the
right balance between the details perfection and the resources
consumption, in order to obtain facial animations with real-time
rendering. We will present here the way in which we achieved such a
3D system that we intend to use as a base point in order to create
facial animations with real-time rendering, used in medicine to find
and to identify different types of pathologies.
Abstract: In the present investigation, H13 tool steel has been
deposited on copper alloy substrate using both CO2 and diode laser.
A detailed parametric analysis has been carried out in order to find
out optimum processing zone for coating defect free H13 tool steel
on copper alloy substrate. Followed by parametric optimization, the
microstructure and microhardness of the deposited clads have been
evaluated. SEM micrographs revealed dendritic microstructure in
both clads. However, the microhardness of CO2 laser deposited clad
was much higher compared to diode laser deposited clad.
Abstract: Covering-based rough sets is an extension of rough
sets and it is based on a covering instead of a partition of the
universe. Therefore it is more powerful in describing some practical
problems than rough sets. However, by extending the rough sets,
covering-based rough sets can increase the roughness of each model
in recognizing objects. How to obtain better approximations from
the models of a covering-based rough sets is an important issue.
In this paper, two concepts, determinate elements and indeterminate
elements in a universe, are proposed and given precise definitions
respectively. This research makes a reasonable refinement of the
covering-element from a new viewpoint. And the refinement may
generate better approximations of covering-based rough sets models.
To prove the theory above, it is applied to eight major coveringbased
rough sets models which are adapted from other literature.
The result is, in all these models, the lower approximation increases
effectively. Correspondingly, in all models, the upper approximation
decreases with exceptions of two models in some special situations.
Therefore, the roughness of recognizing objects is reduced. This
research provides a new approach to the study and application of
covering-based rough sets.
Abstract: In this work, are discussed two formulations of the boundary element method - BEM to perform linear bending analysis of plates reinforced by beams. Both formulations are based on the Kirchhoff's hypothesis and they are obtained from the reciprocity theorem applied to zoned plates, where each sub-region defines a beam or a slab. In the first model the problem values are defined along the interfaces and the external boundary. Then, in order to reduce the number of degrees of freedom kinematics hypothesis are assumed along the beam cross section, leading to a second formulation where the collocation points are defined along the beam skeleton, instead of being placed on interfaces. On these formulations no approximation of the generalized forces along the interface is required. Moreover, compatibility and equilibrium conditions along the interface are automatically imposed by the integral equation. Thus, these formulations require less approximation and the total number of the degree s of freedom is reduced. In the numerical examples are discussed the differences between these two BEM formulations, comparing as well the results to a well-known finite element code.
Abstract: With the intention of screening for heavy metal
tolerance, a number of bacteria were isolated and characterized from
a pristine soil. Two Gram positive isolates were identified as
Paenibacillus sp. and Bacillus thuringeinsis. Tolerance of Cd2+, Cu2+
and Zn2+ by these bacteria was studied and found that both bacteria
were highly sensitive to Cu2+ compared to other two metals. Both
bacteria showed the same pattern of metal tolerance in the order Zn+
> Cd2+ > Cu2+. When the metal tolerance in both bacteria was
compared, Paenibacillus sp. showed the highest sensitivity to Cu2+
where as B. thuringiensis showed highest sensitivity to Cd2+ and Zn2+
.These findings revealed the potential of Paenibacillus sp. in
developing a biosensor to detect Cu2+ in environmental samples.
Abstract: Photoselective plastic films with thermic properties
are now available so that greenhouses clad with such plastics exhibit
a higher degree of “Greenhouse Effect” with a consequent increase in
night time temperature. In this study, we investigate the potential
benefits of a range of thermic plastic films used as greenhouse cover
materials on the vegetative and reproductive growth and development
of Iceberg lettuce (Lactuca sativa L). Transplants were grown under
thermic films and destructively harvested 4, 5, and 6 weeks after
transplanting. Thermic films can increase night temperatures up to 2
⁰C reducing the wide fluctuation in greenhouse temperature during
winter compared to the standard commercial film and consequently
increased the yield (leaf number, fresh weight, and dry weight) of
lettuce plants. Lettuce plants grown under Clear film respond to cold
stress by the accumulation of secondary products (phenolics, and
flavonoids).
Abstract: This paper investigates the effect of International
Financial Reporting Standards (IFRS) adoption on the frequency of
earnings managements towards small positive profits. We focus on
two emerging markets IFRS adopters: South Africa and Turkey.
We tested our logistic regression using appropriate panelestimation
techniques over a sample of 330 South African and 210
Turkish firm-year observations over the period 2002-2008. Our
results document that mandatory adoption of IFRS is not associated
with a reduction in earnings management towards small positive
profits in emerging markets. These results contradict most of the
previous findings of the studies conducted in developed countries.
Based on the legal system factor, we compare the intensity of
earnings management between a code law country (Turkey) and a
common law country (South Africa) over the pre and post-adoption
periods. Our findings show that the frequency of such earnings
management practice increases significantly for the code law
country.
Abstract: A large amount of valuable information is available in
plain text clinical reports. New techniques and technologies are
applied to extract information from these reports. In this study, we
developed a domain based software system to transform 600
Otorhinolaryngology discharge notes to a structured form for
extracting clinical data from the discharge notes. In order to decrease
the system process time discharge notes were transformed into a data
table after preprocessing. Several word lists were constituted to
identify common section in the discharge notes, including patient
history, age, problems, and diagnosis etc. N-gram method was used
for discovering terms co-Occurrences within each section. Using this
method a dataset of concept candidates has been generated for the
validation step, and then Predictive Apriori algorithm for Association
Rule Mining (ARM) was applied to validate candidate concepts.