Abstract: An active suspension system has been proposed to
improve the ride comfort. A quarter-car 2 degree-of-freedom (DOF)
system is designed and constructed on the basis of the concept of a
four-wheel independent suspension to simulate the actions of an
active vehicle suspension system. The purpose of a suspension
system is to support the vehicle body and increase ride comfort. The
aim of the work described in the paper was to illustrate the
application of fuzzy logic technique to the control of a continuously
damping automotive suspension system. The ride comfort is
improved by means of the reduction of the body acceleration caused
by the car body when road disturbances from smooth road and real
road roughness.
The paper describes also the model and controller used in the
study and discusses the vehicle response results obtained from a
range of road input simulations. In the conclusion, a comparison of
active suspension fuzzy control and Proportional Integration
derivative (PID) control is shown using MATLAB simulations.
Abstract: This paper describes an enhanced cookie-based
method for counting the visitors of web sites by using a web log
processing system that aims to cope with the ambitious goal of
creating countrywide statistics about the browsing practices of real
human individuals. The focus is put on describing a new more
efficient way of detecting human beings behind web users by placing
different identifiers on the client computers. We briefly introduce our
processing system designed to handle the massive amount of data
records continuously gathered from the most important content
providers of the Hungary. We conclude by showing statistics of
different time spans comparing the efficiency of multiple visitor
counting methods to the one presented here, and some interesting
charts about content providers and web usage based on real data
recorded in 2007 will also be presented.
Abstract: This paper describes a feasibility study that is
included with the research, development and testing of a micro
communications sonobuoy deployable by Maritime Fixed wing
Unmanned Aerial Vehicles (M-UAV) and rotor wing Quad Copters
which are both currently being developed by the University of
Adelaide. The micro communications sonobuoy is developed to act
as a seamless communication relay between an Autonomous
Underwater Vehicle (AUV) and an above water human operator
some distance away. Development of such a device would eliminate
the requirement of physical communication tethers attached to
submersible vehicles for control and data retrieval.
Abstract: This preliminary study attempts to see if a learning
environment influences instructor’s teaching strategies and learners’
in-class activities in a foreign language class at a university in Japan.
The class under study was conducted in a computer room, while the
majority of classes of the same course were offered in traditional
classrooms without computers. The study also sees if the unplanned
blended learning environment, enhanced, or worked against, in
achieving course goals, by paying close attention to in-class artefacts,
such as computers. In the macro-level analysis, the course syllabus
and weekly itinerary of the course were looked at; and in the microlevel
analysis, nonhuman actors in their environments were named
and analyzed to see how they influenced the learners’ task processes.
The result indicated that students were heavily influenced by the
presence of computers, which lead them to disregard some aspects of
intended learning objectives.
Abstract: Indigenous Knowledge (IK) has many social and
economic benefits. However, IK is at the risk of extinction due to the
difficulties to preserve it as most of the IK largely remains
undocumented. This study aims to design a model of the factors
affecting the adoption of Information and Communication
Technologies (ICTs) for the preservation of IK. The proposed model
is based on theoretical frameworks on ICT adoption. It was designed
following a literature review of ICT adoption theories for households,
and of the factors affecting ICT adoption for IK. The theory that
fitted to the best all factors was then chosen as the basis for the
proposed model. This study found that the Model of Adoption of
Technology in Households (MATH) is the most suitable theoretical
framework for modeling ICT adoption factors for the preservation of
IK.
Abstract: In this paper the Differential Quadrature Method (DQM) is employed to study the coupled lateral-torsional free vibration behavior of the laminated composite beams. In such structures due to the fiber orientations in various layers, the lateral displacement leads to a twisting moment. The coupling of lateral and torsional vibrations is modeled by the bending-twisting material coupling rigidity. In the present study, in addition to the material coupling, the effects of shear deformation and rotary inertia are taken into account in the definition of the potential and kinetic energies of the beam. The governing differential equations of motion which form a system of three coupled PDEs are solved numerically using DQ procedure under different boundary conditions consist of the combinations of simply, clamped, free and other end conditions. The resulting natural frequencies and mode shapes for cantilever beam are compared with similar results in the literature and good agreement is achieved.
Abstract: Misalignment and unbalance are the major concerns
in rotating machinery. When the power supply to any rotating system
is cutoff, the system begins to lose the momentum gained during
sustained operation and finally comes to rest. The exact time period
from when the power is cutoff until the rotor comes to rest is called
Coast Down Time. The CDTs for different shaft cutoff speeds were
recorded at various misalignment and unbalance conditions. The
CDT reduction percentages were calculated for each fault and there
is a specific correlation between the CDT reduction percentage and
the severity of the fault. In this paper, radial basis network, a new
generation of artificial neural networks, has been successfully
incorporated for the prediction of CDT for misalignment and
unbalance conditions. Radial basis network has been found to be
successful in the prediction of CDT for mechanical faults in rotating
machinery.
Abstract: This paper presents an improvement method of
the multiple pitch estimation algorithm using comb filters.
Conventionally the pitch was estimated by using parallel
-connected comb filters method (PCF). However, PCF has
problems which often fail in the pitch estimation when there is
the fundamental frequency of higher tone near harmonics of
lower tone. Therefore the estimation is assigned to a wrong
note when shared frequencies happen. This issue often occurs
in estimating octave 3 or more. Proposed method, for solving
the problem, estimates the pitch with every harmonic instead of
every octave. As a result, our method reaches the accuracy of
more than 80%.
Abstract: The objective of this research seeks to transmit a distance training model to the community in the upper northeastern region. The group sampling consists of 60 community leaders in the municipality of sub-district Kumphawapi, Kumphawapi Disrict, Udonthani Province. The research tools rely on the following instruments, they are : 1) the achievement test of community leaders- training and 2) the satisfaction questionnaires of community leaders. The statistics used in data analysis takes the statistical mean, percentage, standard deviation, and statistical T-test. The resulted findings reveal : 1) the efficiency of the distance training developed by the researcher for the community leaders joining in the training received the average score between in-training and post-training period higher than the setup criterion, 2) the two groups of participants in the training achieved higher knowledge than their pre-training state, 3) the comparison of the achievements between the two group presented no different results, 4) the community leaders obtained the high-to-highest satisfaction.
Abstract: In this paper, we present a method named Signal Level
Matrix (SLM) which can improve the accuracy and stability of active
RFID indoor positioning system. Considering the accuracy and cost,
we use uniform distribution mode to set up and separate the
overlapped signal covering areas, in order to achieve preliminary
location setting. Then, based on the proposed SLM concept and the
characteristic of the signal strength value that attenuates as the
distance increases, this system cross-examines the distribution of
adjacent signals to locate the users more accurately. The experimental
results indicate that the adaptive positioning method proposed in this
paper could improve the accuracy and stability of the positioning
system effectively and satisfyingly.
Abstract: The vibrations produced by a single point defect on
various parts of the bearing under constant radial load are predicted
by using a theoretical model. The model includes variation in the
response due to the effect of bearing dimensions, rotating frequency
distribution of load. The excitation forces are generated when the
defects on the races strike to rolling elements. In case of the outer
ring defect, the pulses generated are with periodicity of outer ring
defect frequency where as for inner ring defect, the pulses are with
periodicity of inner ring defect frequency. The effort has been carried
out in preparing the physical model of the system. Different defect
frequencies are obtained and are used to find out the amplitudes of
the vibration due to excitation of the bearing parts. Increase in the
radial load or severity of the defect produces a significant change in
bearing signature characteristics.
Abstract: 16-Mercaptohexadecanoic acid (MHDA) and tripeptide glutathione conjugated with gold nanoparticles (Au-NPs) are characterized by Fourier Transform InfaRared (FTIR) spectroscopy combined with Surface-enhanced Raman scattering (SERS) spectroscopy. Surface Plasmon Resonance (SPR) technique based on FTIR spectroscopy has become an important tool in biophysics, which is perspective for the study of organic compounds. FTIR-spectra of MHDA shows the line at 2500 cm-1 attributed to thiol group which is modified by presence of Au-NPs, suggesting the formation of bond between thiol group and gold. We also can observe the peaks originate from characteristic chemical group. A Raman spectrum of the same sample is also promising. Our preliminary experiments confirm that SERS-effect takes place for MHDA connected with Au-NPs and enable us to detected small number (less than 106 cm-2) of MHDA molecules. Combination of spectroscopy methods: FTIR and SERS – enable to study optical properties of Au- NPs and immobilized bio-molecules in context of a bio-nano-sensors.
Abstract: The recent growth of using multimedia transmission
over wireless communication systems, have challenges to protect the
data from lost due to wireless channel effect. Images are corrupted
due to the noise and fading when transmitted over wireless channel,
in wireless channel the image is transmitted block by block, Due to
severe fading, entire image blocks can be damaged. The aim of this
paper comes out from need to enhance the digital images at the
wireless receiver side. Proposed Boundary Interpolation (BI)
Algorithm using wavelet, have been adapted here used to
reconstruction the lost block in the image at the receiver depend on
the correlation between the lost block and its neighbors. New
Proposed technique by using Boundary Interpolation (BI) Algorithm
using wavelet with Pixel interleaver has been implemented. Pixel
interleaver work on distribute the pixel to new pixel position of
original image before transmitting the image. The block lost through
wireless channel is only effects individual pixel. The lost pixels at the
receiver side can be recovered by using Boundary Interpolation (BI)
Algorithm using wavelet. The results showed that the New proposed
algorithm boundary interpolation (BI) using wavelet with pixel
interleaver is better in term of MSE and PSNR.
Abstract: This contribution deals with the relationship between
communication effectiveness and the extent of communication
among organizational units. To facilitate communication between
employees and to increase the level of understanding, the knowledge
of communication tools is necessary. Recent experience has shown
that personal communication is critical for smooth running of
companies and cannot be fully replaced by any form of technical
communication devices.
Below are presented the outcomes of the research on the
relationship between the extent of communication among
organisational units and its efficiency.
Abstract: To support user mobility for a wireless network new mechanisms are needed and are fundamental, such as paging, location updating, routing, and handover. Also an important key feature is mobile QoS offered by the WATM. Several ATM network protocols should be updated to implement mobility management and to maintain the already ATM QoS over wireless ATM networks. A survey of the various schemes and types of handover is provided. Handover procedure allows guarantee the terminal connection reestablishment when it moves between areas covered by different base stations. It is useful to satisfy user radio link transfer without interrupting a connection. However, failure to offer efficient solutions will result in handover important packet loss, severe delays and degradation of QoS offered to the applications. This paper reviews the requirements, characteristics and open issues of wireless ATM, particularly with regard to handover. It introduces key aspects of WATM and mobility extensions, which are added in the fixed ATM network. We propose a flexible approach for handover management that will minimize the QoS deterioration. Functional entities of this flexible approach are discussed in order to achieve minimum impact on the connection quality when a MT crosses the BS.
Abstract: Due to the fast development of technology, the
competition of technological products is turbulent; therefore, it is
important to understand the market trend, consumers- demand and
preferences. As the smartphones are prevalent, the main purpose of
this paper is to utilize Analytic Hierarchy Process (AHP) to analyze
consumer-s purchase evaluation factors of smartphones. Through the
AHP expert questionnaire, the smartphones- main functions are
classified as “user interface", “mobile commerce functions",
“hardware and software specifications", “entertainment functions" and
“appearance and design", five aspects to analyze the weights. Then
four evaluation criteria are evaluated under each aspect to rank the
weights. Based on an analysis of data shows that consumers consider
when purchase factors are “hardware and software specifications",
“user interface", “appearance and design", “mobile commerce
functions" and “entertainment functions" in sequence. The “hardware
and software specifications" aspect obtains the weight of 33.18%; it is
the most important factor that consumers are taken into account. In
addition, the most important evaluation criteria are central processing
unit, operating system, touch screen, and battery function in sequence.
The results of the study can be adopted as reference data for mobile
phone manufacturers in the future on the design and marketing
strategy to satisfy the voice of customer.
Abstract: This study aims to investigate mechanical behavior of
deep-drawn cups consisting of aluminum (A1050)/ duralumin
(A2017) multi-layered clad structures with micro- and macro-scale
functional gradients. Such multi-layered clad structures are possibly
used for a new type of crash-boxes in automobiles to effectively
absorb the impact forces generated when automobiles having
collisions. The effect of heat treatments on microstructure,
compositional gradient, micro hardness in 2 and 6-layered aluminum/
duralumin clad structures, which were fabricated by hot rolling, have
been investigated. Impact compressive behavior of deep-drawn cups
consisting of such aluminum/ duralumin clad structures has been also
investigated in terms of energy absorption and maximum force.
Deep-drawn cups consisting of 6-layerd clad structures with microand
macro-scale functional gradients exhibit superior properties in
impact compressive tests.
Abstract: This paper compares the search engine marketing
strategies adopted in China and the Western countries through two illustrative cases, namely, Google and Baidu. Marketers in the West
use search engine optimization (SEO) to rank their sites higher for
queries in Google. Baidu, however, offers paid search placement, or the selling of engine results for particular keywords to the higher
bidders. Whereas Google has been providing innovative services ranging from Google Map to Google Blog, Baidu remains focused on
search services – the one that it does best. The challenges and
opportunities of the Chinese Internet market offered to global entrepreneurs are also discussed in the paper
Abstract: This paper presents part of a research into the small
scale modelling of masonry. Small scale testing of masonry has been
carried out by many authors, but few have attempted a systematic
determination of the parameters that affect masonry at a small scale.
The effect of increasing mortar strength and different sand gradings
under compression were investigated. The results show masonry
strength at small scale is influenced by increasing mortar strength and
different sand gradings.
Abstract: A study has been carried out to determine the effect of
coating two commercial glass-ionomer cements in either petroleum
jelly or wax. After coating, specimens were stored in water for 24 or
168 hours, then the coating removed and the surface examined.
Coating in wax was found to increase the surface hardness
significantly compared with the uncoated control, whereas coating
the specimens in petroleum jelly led to only a slight increase in
surface hardness. Coating in wax led to no detectable ion release
after either 24 or 168 hours, though there was some ion release after
the coating had been removed and the specimens exposed to water
for a further 24 hours. This shows that soluble species remained in
these specimens. Overall, this study confirms the idea that immature
glass-ionomers should be protected from early exposure to moisture,
and that the protection offered by petroleum jelly is only modest.