Abstract: At present, web Service is the first choice to reuse the
legacy system for the implementation of SOA. According to the status
of the implementation of SOA and the status of the legacy systems, we propose four encapsulating strategies. Base on the strategies, we
proposal the service-oriented encapsulating framework, the legacy system can be encapsulated by the service-oriented encapsulating
layer in three aspects, communication protocols, data and program.
The reuse rate of the legacy systems can be increased by using this framework
Abstract: The mechanical properties including flexural and
tensile of neat vinyl ester and polymer based on layered silicate
nanocomposite materials are discussed. The addition of layered
silicate into the polymer matrix increased the tensile and flexural
modulus up to 1 wt.% clay loading. The incorporation of more clay
resulted in decreasing the mechanical properties which was traced to
the existence of aggregation layers. Likewise, up to 1 wt.% clay
loading, the thermal behaviour showed significant improvements and
at higher clay loading the thermal pattern was reduced. The
aggregation layers imparted a negative impact on the overall
mechanical and thermal properties. Wide Angle X-ray Diffraction,
Scanning Electron Microscopy and Transmission Electron
Microscopy were utilised in order to characterise the interlamellar
structure of nanocomposites.
Abstract: In the context of sensor networks, where every few
dB saving counts, the novel node cooperation schemes are reviewed
where MIMO techniques play a leading role. These methods could be
treated as joint approach for designing physical layer of their
communication scenarios. Then we analyzed the BER performance
of transmission diversity schemes under a general fading channel
model and proposed a power allocation strategy to the transmitting
sensor nodes. This approach is then compared to an equal-power
assignment method and its performance enhancement is verified by
the simulation. Another key point of the contribution lies in the
combination of optimal power allocation and sensor nodes-
cooperation in a transmission diversity regime (MISO). Numerical
results are given through figures to demonstrate the optimality and
efficiency of proposed combined approach.
Abstract: Coated tool inserts can be considered as the backbone
of machining processes due to their wear and heat resistance.
However, defects of coating can degrade the integrity of these inserts
and the number of these defects should be minimized or eliminated if
possible. Recently, the advancement of coating processes and
analytical tools open a new era for optimizing the coating tools.
First, an overview is given regarding coating technology for cutting
tool inserts. Testing techniques for coating layers properties, as well
as the various coating defects and their assessment are also surveyed.
Second, it is introduced an experimental approach to examine the
possible coating defects and flaws of worn multicoated carbide
inserts using two important techniques namely scanning electron
microscopy and atomic force microscopy. Finally, it is
recommended a simple procedure for investigating manufacturing
defects and flaws of worn inserts.
Abstract: In this paper a new method for increasing the speed of
SAGCM-APD is proposed. Utilizing carrier rate equations in
different regions of the structure, a circuit model for the structure is
obtained. In this research, in addition to frequency response, the
effect of added new charge layer on some transient parameters like
slew-rate, rising and falling times have been considered. Finally, by
trading-off among some physical parameters such as different layers
widths and droppings, a noticeable decrease in breakdown voltage
has been achieved. The results of simulation, illustrate some features
of proposed structure improvement in comparison with conventional
SAGCM-APD structures.
Abstract: The Multi-Layered Perceptron (MLP) Neural
networks have been very successful in a number of signal processing
applications. In this work we have studied the possibilities and the
met difficulties in the application of the MLP neural networks for the
prediction of daily solar radiation data. We have used the Polack-Ribière algorithm for training the neural networks. A comparison, in
term of the statistical indicators, with a linear model most used in
literature, is also performed, and the obtained results show that the
neural networks are more efficient and gave the best results.
Abstract: The speech signal conveys information about the
identity of the speaker. The area of speaker identification is
concerned with extracting the identity of the person speaking the
utterance. As speech interaction with computers becomes more
pervasive in activities such as the telephone, financial transactions
and information retrieval from speech databases, the utility of
automatically identifying a speaker is based solely on vocal
characteristic. This paper emphasizes on text dependent speaker
identification, which deals with detecting a particular speaker from a
known population. The system prompts the user to provide speech
utterance. System identifies the user by comparing the codebook of
speech utterance with those of the stored in the database and lists,
which contain the most likely speakers, could have given that speech
utterance. The speech signal is recorded for N speakers further the
features are extracted. Feature extraction is done by means of LPC
coefficients, calculating AMDF, and DFT. The neural network is
trained by applying these features as input parameters. The features
are stored in templates for further comparison. The features for the
speaker who has to be identified are extracted and compared with the
stored templates using Back Propogation Algorithm. Here, the
trained network corresponds to the output; the input is the extracted
features of the speaker to be identified. The network does the weight
adjustment and the best match is found to identify the speaker. The
number of epochs required to get the target decides the network
performance.
Abstract: The turbulent mixing of coolant streams of different
temperature and density can cause severe temperature fluctuations in
piping systems in nuclear reactors. In certain periodic contraction
cycles these conditions lead to thermal fatigue. The resulting aging
effect prompts investigation in how the mixing of flows over a sharp
temperature/density interface evolves. To study the fundamental
turbulent mixing phenomena in the presence of density gradients,
isokinetic (shear-free) mixing experiments are performed in a square
channel with Reynolds numbers ranging from 2-500 to 60-000.
Sucrose is used to create the density difference. A Wire Mesh Sensor
(WMS) is used to determine the concentration map of the flow in the
cross section. The mean interface width as a function of velocity,
density difference and distance from the mixing point are analyzed
based on traditional methods chosen for the purposes of
atmospheric/oceanic stratification analyses. A definition of the
mixing layer thickness more appropriate to thermal fatigue and based
on mixedness is devised. This definition shows that the thermal
fatigue risk assessed using simple mixing layer growth can be
misleading and why an approach that separates the effects of large
scale (turbulent) and small scale (molecular) mixing is necessary.
Abstract: Choosing the right metadata is a critical, as good
information (metadata) attached to an image will facilitate its
visibility from a pile of other images. The image-s value is enhanced
not only by the quality of attached metadata but also by the technique
of the search. This study proposes a technique that is simple but
efficient to predict a single human image from a website using the
basic image data and the embedded metadata of the image-s content
appearing on web pages. The result is very encouraging with the
prediction accuracy of 95%. This technique may become a great
assist to librarians, researchers and many others for automatically and
efficiently identifying a set of human images out of a greater set of
images.
Abstract: Network layer multicast, i.e. IP multicast, even after
many years of research, development and standardization, is not
deployed in large scale due to both technical (e.g. upgrading of
routers) and political (e.g. policy making and negotiation) issues.
Researchers looked for alternatives and proposed application/overlay
multicast where multicast functions are handled by end hosts, not
network layer routers. Member hosts wishing to receive multicast
data form a multicast delivery tree. The intermediate hosts in the tree
act as routers also, i.e. they forward data to the lower hosts in the
tree. Unlike IP multicast, where a router cannot leave the tree until all
members below it leave, in overlay multicast any member can leave
the tree at any time thus disjoining the tree and disrupting the data
dissemination. All the disrupted hosts have to rejoin the tree. This
characteristic of the overlay multicast causes multicast tree unstable,
data loss and rejoin overhead. In this paper, we propose that each node
sets its leaving time from the tree and sends join request to a number
of nodes in the tree. The nodes in the tree will reject the request if
their leaving time is earlier than the requesting node otherwise they
will accept the request. The node can join at one of the accepting
nodes. This makes the tree more stable as the nodes will join the tree
according to their leaving time, earliest leaving time node being at the
leaf of the tree. Some intermediate nodes may not follow their leaving
time and leave earlier than their leaving time thus disrupting the tree.
For this, we propose a proactive recovery mechanism so that disrupted
nodes can rejoin the tree at predetermined nodes immediately. We
have shown by simulation that there is less overhead when joining
the multicast tree and the recovery time of the disrupted nodes is
much less than the previous works. Keywords
Abstract: In a particular case of behavioural model reduction by ANNs, a validity domain shortening has been found. In mechanics, as in other domains, the notion of validity domain allows the engineer to choose a valid model for a particular analysis or simulation. In the study of mechanical behaviour for a cantilever beam (using linear and non-linear models), Multi-Layer Perceptron (MLP) Backpropagation (BP) networks have been applied as model reduction technique. This reduced model is constructed to be more efficient than the non-reduced model. Within a less extended domain, the ANN reduced model estimates correctly the non-linear response, with a lower computational cost. It has been found that the neural network model is not able to approximate the linear behaviour while it does approximate the non-linear behaviour very well. The details of the case are provided with an example of the cantilever beam behaviour modelling.
Abstract: A new concept for long-term reagent storage for Labon- a-Chip (LoC) devices is described. Here we present a polymer multilayer stack with integrated stick packs for long-term storage of several liquid reagents, which are necessary for many diagnostic applications. Stick packs are widely used in packaging industry for storing solids and liquids for long time. The storage concept fulfills two main requirements: First, a long-term storage of reagents in stick packs without significant losses and interaction with surroundings, second, on demand releasing of liquids, which is realized by pushing a membrane against the stick pack through pneumatic pressure. This concept enables long-term on-chip storage of liquid reagents at room temperature and allows an easy implementation in different LoC devices.
Abstract: The notion of Next Generation Network (NGN) is
based on the Network Convergence concept which refers to
integration of services (such as IT and communication services) over
IP layer. As the most popular implementation of Service Oriented
Architecture (SOA), Web Services technology is known to be the
base for service integration. In this paper, we present a platform to
deliver communication services as web services. We also implement
a sample service to show the simplicity of making composite web
and communication services using this platform. A Service Logic
Execution Environment (SLEE) is used to implement the
communication services. The proposed architecture is in agreement
with Service Oriented Architecture (SOA) and also can be integrated
to an Enterprise Service Bus to make a base for NGN Service
Delivery Platform (SDP).
Abstract: Generally, administrative systems in an academic
environment are disjoint and support independent queries. The
objective in this work is to semantically connect these independent
systems to provide support to queries run on the integrated platform.
The proposed framework, by enriching educational material in the
legacy systems, provides a value-added semantics layer where
activities such as annotation, query and reasoning can be carried out
to support management requirements. We discuss the development of
this ontology framework with a case study of UAE University
program administration to show how semantic web technologies can
be used by administration to develop student profiles for better
academic program management.
Abstract: The cinema in Turkey during the 1940s was shaped
under the Second World War conditions. The amateur film makers
from different socioeconomic roots experienced movie production in
those years. Having similar socioeconomic characteristics and
autobiographies, each of them has a different understanding of
cinema. Nevertheless, they joined in making movies which address
native culture and audience. They narrated indigenous stories with
native music, amateur players and simple settings. Although the
martial law, censorship and economical deficiencies, they started to
produce films in the Second World War. The cinematographers of the
1940s usually called as thetransition period cinematographers in
Turkey, producing in the passage between the period of thetheatre
playersand the period of thenational cinema. But, 1940- 1950 period
of Turkish cinema should be defined not as a transition but a period
of forming the professional conscioussness in cinema.
Abstract: In this work we study the reflection of circularly
polarised light from a nano-structured biological material found in
the exocuticle of scarabus beetles. This material is made of a stack
of ultra-thin (~5 nm) uniaxial layers arranged in a left-handed
helicoidal stack, which resonantly reflects circularly polarized light.
A chirp in the layer thickness combined with a finite absorption
coefficient produce a broad smooth reflectance spectrum. By
comparing model calculations and electron microscopy with
measured spectra we can explain our observations and quantify most
relevant structural parameters.
Abstract: The new optimization method for fiber orientation
angle optimization of symmetrical multilayer plates like plywood is
proposed. Optimization method consists of seeking for minimal
compliance by choosing appropriate fiber orientation angle in outer
layers of flexural plate. The discrete values of fiber orientation angles
are used in method. Optimization results of simply supported plate
and multispan plate with uniformly distributed load are provided.
Results show that stiffness could be increased up to 20% by changing
wood fiber orientation angle in one or two outer layers.
Abstract: In this paper we present an adaptive method for image
compression that is based on complexity level of the image. The
basic compressor/de-compressor structure of this method is a multilayer
perceptron artificial neural network. In adaptive approach
different Back-Propagation artificial neural networks are used as
compressor and de-compressor and this is done by dividing the
image into blocks, computing the complexity of each block and then
selecting one network for each block according to its complexity
value. Three complexity measure methods, called Entropy, Activity
and Pattern-based are used to determine the level of complexity in
image blocks and their ability in complexity estimation are evaluated
and compared. In training and evaluation, each image block is
assigned to a network based on its complexity value. Best-SNR is
another alternative in selecting compressor network for image blocks
in evolution phase which chooses one of the trained networks such
that results best SNR in compressing the input image block. In our
evaluations, best results are obtained when overlapping the blocks is
allowed and choosing the networks in compressor is based on the
Best-SNR. In this case, the results demonstrate superiority of this
method comparing with previous similar works and JPEG standard
coding.
Abstract: Migration in breast cancer cell wound healing assay
had been studied using image fractal dimension analysis. The
migration of MDA-MB-231 cells (highly motile) in a wound healing
assay was captured using time-lapse phase contrast video microscopy
and compared to MDA-MB-468 cell migration (moderately motile).
The Higuchi fractal method was used to compute the fractal
dimension of the image intensity fluctuation along a single pixel
width region parallel to the wound. The near-wound region fractal
dimension was found to decrease three times faster in the MDA-MB-
231 cells initially as compared to the less cancerous MDA-MB-468
cells. The inner region fractal dimension was found to be fairly
constant for both cell types in time and suggests a wound influence
range of about 15 cell layer. The box-counting fractal dimension
method was also used to study region of interest (ROI). The MDAMB-
468 ROI area fractal dimension was found to decrease
continuously up to 7 hours. The MDA-MB-231 ROI area fractal
dimension was found to increase and is consistent with the behavior
of a HGF-treated MDA-MB-231 wound healing assay posted in the
public domain. A fractal dimension based capacity index has been
formulated to quantify the invasiveness of the MDA-MB-231 cells in
the perpendicular-to-wound direction. Our results suggest that image
intensity fluctuation fractal dimension analysis can be used as a tool
to quantify cell migration in terms of cancer severity and treatment
responses.
Abstract: The hydrolysis kinetics of polycrystalline lithium hydride (LiH) in argon at various low humidities was measured by gravimetry and Raman spectroscopy with ambient water concentration ranging from 200 to 1200 ppm. The results showed that LiH hydrolysis curve revealed a paralinear shape, which was attributed to two different reaction stages that forming different products as explained by the 'Layer Diffusion Control' model. Based on the model, a novel two-stage rate equation for LiH hydrolysis reactions was developed and used to fit the experimental data for determination of Li2O steady thickness Hs and the ultimate hydrolysis rate vs. The fitted data presented a rise of Hs as ambient water concentration cw increased. However, in spite of the negative effect imposed by Hs increasing, the upward trend of vs remained, which implied that water concentration, rather than Li2O thickness, played a predominant role in LiH hydrolysis kinetics. In addition, the proportional relationship between vsHs and cw predicted by rate equation and confirmed by gravimetric data validated the model in such conditions.