Abstract: The polyfunctional and highly reactive bio-polymer,
the chitosan was first regioselectively converted into dialkylated
chitosan using dimsyl anionic solution(NaH in DMSO) and
bromodecane after protecting amino groups by phthalic anhydride.
The dibenzo-18-crown-6-ether, on the other hand, was converted into
its carbonyl derivatives via Duff reaction prior to incorporate into
chitosan by Schiff base formation. Thus formed diformylated
dibenzo-18-crown-6-ether was condensed with lipophilic chitosan to
prepare the novel solvent extraction reagent. The products were
characterized mainly by IR and 1H-NMR. Hence, the multidentate
crown ether-embedded polyfunctional bio-material was tested for
extraction of Pd(II) and Pt(IV) in aqueous solution.
Abstract: Radiofrequency (RF) lesioning of nerves have been commonly used to alleviate chronic pain, where RF current preventing transmission of pain signals through the nerve by heating the nerve causing the pain. There are some factors that affect the temperature distribution and the nerve lesion size, one of these factors is the inhomogeneities in the tissue medium. Our objective is to calculate the temperature distribution and the nerve lesion size in an inhomogeneous medium surrounding the RF electrode. A two 3-D finite element models are used to compare the temperature distribution in the homogeneous and inhomogeneous medium. Also the effect of temperature-dependent electric conductivity on maximum temperature and lesion size is observed. Results show that the presence of an inhomogeneous medium around the RF electrode has a valuable effect on the temperature distribution and lesion size. The dependency of electric conductivity on tissue temperature increased lesion size.
Abstract: In Mauritius, much emphasis is put on measures to
combat the high prevalence of non-communicable diseases (NCDs).
Health promotion campaigns for the adoption of healthy behaviors
and screening programs are done regularly by local authorities and
NCD surveys are carried out at intervals. However, the health
behaviors of the poor have not been investigated so far. This study
aims to give an insight on the perceptions of health status and
lifestyle health behaviors of poor people in Mauritius. A crosssectional
study among 83 persons benefiting from social aid in a
selected urban district was carried out. Results showed that 51.8% of
respondents perceived that they had good health status. 57.8% had no
known NCD whilst 25.3% had hypertension, followed by diabetes
(16.9%), asthma (9.6%) and heart disease (7.2%).They had low
smoking (10.8%) and alcohol consumption (6.0%) as well as high
physical activity prevalence (54.2%). These results were significantly
different from the NCD survey carried out in the general population.
Consumption of vegetables in the study was high. Overweight and
obesity trends were however similar to the NCD survey report 2009.
These findings contrast with other international studies showing poor
people having poor perceptions of health status and unhealthy
behavioral choices. Whether these positive health behaviors of poor
people in Mauritius arise out of choice or whether it is because the
alternative behavior is too costly remains to be investigated further.
Abstract: Negation is useful in the majority of the real world applications. However, its introduction leads to semantic and canonical problems. We propose in this paper an approach based on stratification to deal with negation problems. This approach is based on an extension of predicates nets. It is characterized with two main contributions. The first concerns the management of the whole class of stratified programs. The second contribution is related to usual operations optimizations on stratified programs (maximal stratification, incremental updates ...).
Abstract: A combination of photosynthetic bacteria along with
anaerobic acidogenic bacteria is an ideal option for efficient
hydrogen production. In the present study, the optimum
concentration of substrates for the growth of Rhodobacter
sphaeroides was found by response surface methodology. The
optimum combination of three individual fatty acids was determined
by Box Behnken design. Increase of volatile fatty acid concentration
decreased the growth. Combination of sodium acetate and sodium
propionate was most significant for the growth of the organism. The
results showed that a maximum biomass concentration of 0.916 g/l
was obtained when the concentrations of acetate, propionate and
butyrate were 0.73g/l,0.99g/l and 0.799g/l, respectively. The growth
was studied under an optimum concentration of volatile fatty acids
and at a light intensity of 3000 lux, initial pH of 7 and a temperature
of 35°C.The maximum biomass concentration of 0.92g/l was
obtained which verified the practicability of this optimization.
Abstract: In this paper, the process of obtaining Q and R
matrices for optimal pitch aircraft control system has been described.
Since the innovation of optimal control method, the determination of
Q and R matrices for such system has not been fully specified. The
value of Q and R for optimal pitch aircraft control application, have
been simulated and calculated. The suitable results for Q and R have
been observed through the performance index (PI). If the PI is small
“enough", we would say the Q & R values are suitable for that
certain type of optimal control system. Moreover, for the same value
of PI, we could have different Q and R sets. Due to the rule-free
determination of Q and R matrices, a specific method is brought to
find out the rough value of Q and R referring to rather small value of
PI.
Abstract: The machining performance is determined by the
frequency characteristics of the machine-tool structure and the
dynamics of the cutting process. Therefore, the prediction of dynamic
vibration behavior of spindle tool system is of great importance for the
design of a machine tool capable of high-precision and high-speed
machining. The aim of this study is to develop a finite element model
to predict the dynamic characteristics of milling machine tool and
hence evaluate the influence of the preload of the spindle bearings. To
this purpose, a three dimensional spindle bearing model of a high
speed engraving spindle tool was created. In this model, the rolling
interfaces with contact stiffness defined by Harris model were used to
simulate the spindle bearing components. Then a full finite element
model of a vertical milling machine was established by coupling the
spindle tool unit with the machine frame structure. Using this model,
the vibration mode that had a dominant influence on the dynamic
stiffness was determined. The results of the finite element simulations
reveal that spindle bearing with different preloads greatly affect the
dynamic behavior of the spindle tool unit and hence the dynamic
responses of the vertical column milling system. These results were
validated by performing vibration on the individual spindle tool unit
and the milling machine prototype, respectively. We conclude that
preload of the spindle bearings is an important component affecting
the dynamic characteristics and machining performance of the entire
vertical column structure of the milling machine.
Abstract: An upwind difference approximation is used for a singularly perturbed problem in material science. Based on the discrete Green-s function theory, the error estimate in maximum norm is achieved, which is first-order uniformly convergent with respect to the perturbation parameter. The numerical experimental result is verified the valid of the theoretical analysis.
Abstract: This work involved the use of phytoremediation to
remediate an aged soil contaminated with polychlorinated biphenyls
(PCBs). At microcosm scale, tests were prepared using soil samples
that have been collected in an industrial area with a total PCBs
concentration of about 250 μg kg-1. Medicago sativa and Lolium
italicum were the species selected in this study that is used as
“feasibility test" for full scale remediation. The experiment was
carried out with the addition of a mixture of randomly methylatedbeta-
cyclodextrins (RAMEB). At the end of the experiment analysis
of soil samples showed that in general the presence of plants has led
to a higher degradation of most congeners with respect to not
vegetated soil. The two plant species efficiencies were comparable
and improved by RAMEB addition with a final reduction of total
PCBs near to 50%. With increasing the chlorination of the congeners
the removal percentage of PCBs progressively decreased.
Abstract: This paper presents a new hardware interface using a
microcontroller which processes audio music signals to standard
MIDI data. A technique for processing music signals by extracting
note parameters from music signals is described. An algorithm to
convert the voice samples for real-time processing without complex
calculations is proposed. A high frequency microcontroller as the
main processor is deployed to execute the outlined algorithm. The
MIDI data generated is transmitted using the EIA-232 protocol. The
analyses of data generated show the feasibility of using
microcontrollers for real-time MIDI generation hardware interface.
Abstract: Efforts to secure supervisory control and data acquisition
(SCADA) systems must be supported under the guidance of
sound security policies and mechanisms to enforce them. Critical
elements of the policy must be systematically translated into a format
that can be used by policy enforcement components. Ideally, the
goal is to ensure that the enforced policy is a close reflection of
the specified policy. However, security controls commonly used to
enforce policies in the IT environment were not designed to satisfy
the specific needs of the SCADA environment. This paper presents
a language, based on the well-known XACML framework, for the
expression of authorization policies for SCADA systems.
Abstract: This paper presents an overview of the design and
implementation of an online rule-based Expert Systems for Islamic
medication. T his Online Islamic Medication Expert System (OIMES)
focuses on physical illnesses only. Knowledge base of this Expert
System contains exhaustively the types of illness together with their
related cures or treatments/therapies, obtained exclusively from the
Quran and Hadith. Extensive research and study are conducted to
ensure that the Expert System is able to provide the most suitable
treatment with reference to the relevant verses cited in Quran or
Hadith. These verses come together with their related 'actions'
(bodily actions/gestures or some acts) to be performed by the patient
to treat a particular illness/sickness. These verses and the instructions
for the 'actions' are to be displayed unambiguously on the computer
screen. The online platform provides the advantage for patient getting
treatment practically anytime and anywhere as long as the computer
and Internet facility exist. Patient does not need to make appointment
to see an expert for a therapy.
Abstract: Agriculture products are being more demanding in
market today. To increase its productivity, automation to produce
these products will be very helpful. The purpose of this work is to
measure and determine the ripeness and quality of watermelon. The
textures on watermelon skin will be captured using digital camera.
These images will be filtered using image processing technique. All
these information gathered will be trained using ANN to determine
the watermelon ripeness accuracy. Initial results showed that the best
model has produced percentage accuracy of 86.51%, when measured
at 32 hidden units with a balanced percentage rate of training dataset.
Abstract: fibers of pure cellulose can be made from some bacteria such as acetobacter xylinum. Bacterial cellulose fibers are very pure, tens of nm across and about 0.5 micron long. The fibers are very stiff and, although nobody seems to have measured the strength of individual fibers. Their stiffness up to 70 GPa. Fundamental strengths should be at least greater than those of the best commercial polymers, but best bulk strength seems to about the same as that of steel. They can potentially be produced in industrial quantities at greatly lowered cost and water content, and with triple the yield, by a new process. This article presents a critical review of the available information on the bacterial cellulose as a biological nonwoven fabric with special emphasis on its fermentative production and applications. Characteristics of bacterial cellulose biofabric with respect to its structure and physicochemical properties are discussed. Current and potential applications of bacterial cellulose in textile, nonwoven cloth, paper, films synthetic fiber coating, food, pharmaceutical and other industries are also presented.
Abstract: Task of object localization is one of the major
challenges in creating intelligent transportation. Unfortunately, in
densely built-up urban areas, localization based on GPS only
produces a large error, or simply becomes impossible. New
opportunities arise for the localization due to the rapidly emerging
concept of a wireless ad-hoc network. Such network, allows
estimating potential distance between these objects measuring
received signal level and construct a graph of distances in which
nodes are the localization objects, and edges - estimates of the
distances between pairs of nodes. Due to the known coordinates of
individual nodes (anchors), it is possible to determine the location of
all (or part) of the remaining nodes of the graph. Moreover, road
map, available in digital format can provide localization routines
with valuable additional information to narrow node location search.
However, despite abundance of well-known algorithms for solving
the problem of localization and significant research efforts, there are
still many issues that currently are addressed only partially. In this
paper, we propose localization approach based on the graph mapped
distances on the digital road map data basis. In fact, problem is
reduced to distance graph embedding into the graph representing area
geo location data. It makes possible to localize objects, in some cases
even if only one reference point is available. We propose simple
embedding algorithm and sample implementation as spatial queries
over sensor network data stored in spatial database, allowing
employing effectively spatial indexing, optimized spatial search
routines and geometry functions.
Abstract: In this study arsenate [As(V)] removal from drinking water by coagulation process was investigated. Ferric chloride (FeCl3.6H2O) and ferrous sulfate (FeSO4.7H2O) were used as coagulant. The effects of major operating variables such as coagulant dose (1–30 mg/L) and pH (5.5–9.5) were investigated. Ferric chloride and ferrous sulfate were found as effective and reliable coagulant due to required dose, residual arsenate and coagulant concentration. Optimum pH values for maximum arsenate removal for ferrous sulfate and ferric chloride were found as 8 and 7.5. The arsenate removal efficiency decreased at neutral and acidic pH values for Fe(II) and at the high acidic and high alkaline pH for Fe(III). It was found that the increase of coagulant dose caused a substantial increase in the arsenate removal. But above a certain ferric chloride and ferrous sulfate dosage, the increase in arsenate removal was not significant. Ferric chloride and ferrous sulfate dose above 8 mg/L slightly increased arsenate removal.
Abstract: The objective of this paper is to support the application of Open Innovation practices in firms and organizations by the assessment and management of Intellectual Capital. Intellectual Capital constituents are analyzed in order to verify their capability of acting as key drivers of Open Innovation processes and, therefore, of creating value. A methodology is defined to settle a procedure which helps to select the most relevant Intellectual Capital value drivers and to provide Communities of Innovation with strategic and managerial guidelines in sustaining Open Innovation paradigm. An application of the methodology is developed within a specifically addressed project and its results are hereafter examined.
Abstract: Due to increased number of terrorist attacks in recent years, loads induced by explosions need to be incorporated in building designs. For safer performance of a structure, its foundation should have sufficient strength and stability. Therefore, prior to any reconstruction or rehabilitation of a building subjected to blast, it is important to examine adverse effects on the foundation caused by blast induced ground shocks. This paper evaluates the effects of a buried explosion on a pile foundation. It treats the dynamic response of the pile in saturated sand, using explicit dynamic nonlinear finite element software LS-DYNA. The blast induced wave propagation in the soil and the horizontal deformation of pile are presented and the results are discussed. Further, a parametric study is carried out to evaluate the effect of varying the explosive shape on the pile response. This information can be used to evaluate the vulnerability of piled foundations to credible blast events as well as develop guidance for their design.
Abstract: The effect of concentration of reduction agent of
sodium borohydrate (NaBH4) on the properties of silicon
nanoparticles synthesized via microemulsion route is reported. In
this work, the concentration of the silicon tetrachloride (SiCl4) that
served as silicon source with sodium hydroxide (NaOH) and
polyethylene glycol (PEG) as stabilizer and surfactant, respectively,
are keep fixed. Four samples with varied concentration of NaBH4
from 0.05 M to 0.20 M were synthesized. It was found that the lowest
concentration of NaBH4 gave better formation of silicon
nanoparticles.
Abstract: Despite the internet, which is one of the mass media
that has become quite common in recent years, the relationship of
Advertisement with Television and Cinema, which have always
drawn attention of researchers as basic media and where visual use is
in the foreground, have also become the subject of various studies.
Based on the assumption that the known fundamental effects of
advertisements on consumers are closely related to the creative
process of advertisements as well as the nature and characteristics of
the medium where they are used, these basic mass media (Television
and Cinema) and the consumer motivations of the advertisements
they broadcast have become a focus of study.
Given that the viewers of the mass media in question have shifted
from a passive position to a more active one especially in recent years
and approach contents of advertisements, as they do all contents, in a
more critical and “pitiless" manner, it is possible to say that
individuals make more use of advertisements than in the past and
combine their individual goals with the goals of the advertisements.
This study, which aims at finding out what the goals of these new
individual advertisement use are, how they are shaped by the distinct
characteristics of Television and Cinema, where visuality takes
precedence as basic mass media, and what kind of places they occupy
in the minds of consumers, has determined consumers- motivations
as: “Entertainment", “Escapism", “Play", “Monitoring/Discovery",
“Opposite Sex" and “Aspirations and Role Models".
This study intends to reveal the differences or similarities among
the needs and hence the gratifications of viewers who consume
advertisements on Television or at the Cinema, which are two basic
media where visuality is prioritized.