Abstract: In this paper, the optimum weight and cost of a laminated composite plate is seeked, while it undergoes the heaviest load prior to a complete failure. Various failure criteria are defined for such structures in the literature. In this work, the Tsai-Hill theory is used as the failure criterion. The theory of analysis was based on the Classical Lamination Theory (CLT). A newly type of Genetic Algorithm (GA) as an optimization technique with a direct use of real variables was employed. Yet, since the optimization via GAs is a long process, and the major time is consumed through the analysis, Radial Basis Function Neural Networks (RBFNN) was employed in predicting the output from the analysis. Thus, the process of optimization will be carried out through a hybrid neuro-GA environment, and the procedure will be carried out until a predicted optimum solution is achieved.
Abstract: Reduction of Single Input Single Output (SISO) continuous systems into Reduced Order Model (ROM), using a conventional and an evolutionary technique is presented in this paper. In the conventional technique, the mixed advantages of Mihailov stability criterion and continued fraction expansions (CFE) technique is employed where the reduced denominator polynomial is derived using Mihailov stability criterion and the numerator is obtained by matching the quotients of the Cauer second form of Continued fraction expansions. In the evolutionary technique method Particle Swarm Optimization (PSO) is employed to reduce the higher order model. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical example.
Abstract: This paper is aimed at describing a delay-based endto-
end (e2e) congestion control algorithm, called Very FAST TCP
(VFAST), which is an enhanced version of FAST TCP. The main
idea behind this enhancement is to smoothly estimate the Round-Trip
Time (RTT) based on a nonlinear filter, which eliminates throughput
and queue oscillation when RTT fluctuates. In this context, an evaluation
of the suggested scheme through simulation is introduced, by
comparing our VFAST prototype with FAST in terms of throughput,
queue behavior, fairness, stability, RTT and adaptivity to changes in
network. The achieved simulation results indicate that the suggested
protocol offer better performance than FAST TCP in terms of RTT
estimation and throughput.
Abstract: Developing techniques for mobile robot navigation constitutes one of the major trends in the current
research on mobile robotics. This paper develops a local
model network (LMN) for mobile robot navigation. The
LMN represents the mobile robot by a set of locally valid
submodels that are Multi-Layer Perceptrons (MLPs).
Training these submodels employs Back Propagation (BP) algorithm. The paper proposes the fuzzy C-means (FCM) in this scheme to divide the input space to sub regions, and then a submodel (MLP) is identified to represent a particular
region. The submodels then are combined in a unified
structure. In run time phase, Radial Basis Functions (RBFs) are employed as windows for the activated submodels. This
proposed structure overcomes the problem of changing operating regions of mobile robots. Read data are used in all experiments. Results for mobile robot navigation using the
proposed LMN reflect the soundness of the proposed
scheme.
Abstract: Mobile Picture Puzzle is a mobile game application where the player use existing images stored in the mobile phone to create a puzzle to be played. This traditional picture puzzle is not so challenging once the player is familiar with the game. The objective of the developed mobile game application is to have a similar mobile game application that can provide the player with more challenging gaming experience. The developed mobile game application is also a mobile picture puzzle game application to create a puzzle to be played but instead of just using existing images that are stored, the personalised capability allows the player to use the built-in camera phone to capture an image and use the newly captured image to create the puzzle. The development of the mobile game application uses Symbian Operating System (OS), Mobile Media API (Application Programming Interface), Record Management System (RMS) storage and TiledLayer class from Game API.
Abstract: A water reuse system in wetland paddy was simulated
to supply water for industrial in this paper. A two-tank model was employed to represent the return flow of the wetland paddy.Historical data were performed for parameter estimation and model verification. With parameters estimated from the data, the model was then used to simulate a reasonable return flow rate from the wetland
paddy. The simulation results show that the return flow ratio was 11.56% in the first crop season and 35.66% in the second crop
season individually; the difference may result from the heavy rainfall in the second crop season. Under the existent pond with surplus
active capacity, the water reuse ratio was 17.14%, and the water supplementary ratio was 21.56%. However, the pattern of rainfall, the
active capacity of the pond, and the rate of water treatment limit the
volume of reuse water. Increasing the irrigation water, dredging the
depth of pond before rainy season and enlarging the scale of module are help to develop water reuse system to support for the industrial
water use around wetland paddy.
Abstract: Interaction effects of xanthan gum (XG), carboxymethyl
cellulose (CMC), and locust bean gum (LBG) on the flow properties
of oil-in-water emulsions were investigated by a mixture design
experiment. Blends of XG, CMC and LBG were prepared according
to an augmented simplex-centroid mixture design (10 points) and used
at 0.5% (wt/wt) in the emulsion formulations. An appropriate
mathematical model was fitted to express each response as a function
of the proportions of the blend components that are able to
empirically predict the response to any blend of combination of the
components. The synergistic interaction effect of the ternary
XG:CMC:LBG blends at approximately 33-67% XG levels was
shown to be much stronger than that of the binary XG:LBG blend at
50% XG level (p < 0.05). Nevertheless, an antagonistic interaction
effect became significant as CMC level in blends was more than 33%
(p < 0.05). Yield stress and apparent viscosity (at 10 s-1) responses
were successfully fitted with a special quartic model while flow
behaviour index and consistency coefficient were fitted with a full
quartic model (R2
adjusted ≥ 0.90). This study found that a mixture
design approach could serve as a valuable tool in better elucidating
and predicting the interaction effects beyond the conventional twocomponent
blends.
Abstract: The most planted cover crops in the Czech Republic
are mustard (Sinapis alba) and phacelia (Phacelia tanacetifolia
Benth.). A field trial was executed to evaluate root system size (RSS)
in eight varieties of mustard and five varieties of phacelia on two
locations, in three BBCH phases and in two years. The relationship
between RSS and aboveground biomass was inquired. The root
system was assessed by measuring its electric capacity. Aboveground
mass and root samples to be evaluated by means of a digital image
analysis were recovered in the BBCH phase 70. The yield of
aboveground biomass of mustard was always statistically
significantly higher than that of phacelia. Mustard showed a
statistically significant negative correlation between root length
density (RLD) within 10 cm and aboveground biomass weight (r = -
0.46*). Phacelia featured a statistically significant correlation
between aboveground biomass production and nitrate nitrogen
content in soil (r=0.782**).
Abstract: Facial recognition and expression analysis is rapidly
becoming an area of intense interest in computer science and humancomputer
interaction design communities. The most expressive way
humans display emotions is through facial expressions. In this paper
skin and non-skin pixels were separated. Face regions were extracted
from the detected skin regions. Facial expressions are analyzed from
facial images by applying Gabor wavelet transform (GWT) and
Discrete Cosine Transform (DCT) on face images. Radial Basis
Function (RBF) Network is used to identify the person and to classify
the facial expressions. Our method reliably works even with faces,
which carry heavy expressions.
Abstract: On-board Error Detection and Correction (EDAC)
devices aim to secure data transmitted between the central
processing unit (CPU) of a satellite onboard computer and its local
memory. This paper presents a comparison of the performance of
four low complexity EDAC techniques for application in Random
Access Memories (RAMs) on-board small satellites. The
performance of a newly proposed EDAC architecture is measured
and compared with three different EDAC strategies, using the same
FPGA technology. A statistical analysis of single-event upset (SEU)
and multiple-bit upset (MBU) activity in commercial memories
onboard Alsat-1 is given for a period of 8 years
Abstract: In this research, Response Surface Methodology (RSM) is used to investigate the effect of four controllable input variables namely: discharge current, pulse duration, pulse off time and applied voltage Surface Roughness (SR) of on Electrical Discharge Machined surface. To study the proposed second-order polynomial model for SR, a Central Composite Design (CCD) is used to estimation the model coefficients of the four input factors, which are alleged to influence the SR in Electrical Discharge Machining (EDM) process. Experiments were conducted on AISI D2 tool steel with copper electrode. The response is modeled using RSM on experimental data. The significant coefficients are obtained by performing Analysis of Variance (ANOVA) at 5% level of significance. It is found that discharge current, pulse duration, and pulse off time and few of their interactions have significant effect on the SR. The model sufficiency is very satisfactory as the Coefficient of Determination (R2) is found to be 91.7% and adjusted R2-statistic (R2 adj ) 89.6%.
Abstract: ANNARIMA that combines both autoregressive integrated moving average (ARIMA) model and artificial neural network (ANN) model is a valuable tool for modeling and forecasting nonlinear time series, yet the over-fitting problem is more likely to occur in neural network models. This paper provides a hybrid methodology that combines both radial basis function (RBF) neural network and auto regression (AR) model based on binomial smoothing (BS) technique which is efficient in data processing, which is called BSRBFAR. This method is examined by using the data of Canadian Lynx data. Empirical results indicate that the over-fitting problem can be eased using RBF neural network based on binomial smoothing which is called BS-RBF, and the hybrid model–BS-RBFAR can be an effective way to improve forecasting accuracy achieved by BSRBF used separately.
Abstract: In this work, the autoregressive vectors are used to
know dynamics of the Agricultural export and import, and the real
effective exchange rate (REER). In order to analyze the interactions,
the impulse- response function is used in decomposition of variance,
causality of Granger as well as the methodology of Johansen to know
the relations co integration. The REER causes agricultural export and
import in the sense of Granger. The influence displays the
innovations of the REER on the agricultural export and import is not
very great and the duration of the effects is short. It displays that
REER has an immediate positive effect, after the tenth year it
displays smooth results on the agricultural export. Evidence of a
vector exists co integration, In short run, REER has smaller effects
on export and import, compared to the long-run effects.
Abstract: Many works have been carried out to compare the
efficiency of several goodness of fit procedures for identifying
whether or not a particular distribution could adequately explain a
data set. In this paper a study is conducted to investigate the power
of several goodness of fit tests such as Kolmogorov Smirnov (KS),
Anderson-Darling(AD), Cramer- von- Mises (CV) and a proposed
modification of Kolmogorov-Smirnov goodness of fit test which
incorporates a variance stabilizing transformation (FKS). The
performances of these selected tests are studied under simple
random sampling (SRS) and Ranked Set Sampling (RSS). This
study shows that, in general, the Anderson-Darling (AD) test
performs better than other GOF tests. However, there are some
cases where the proposed test can perform as equally good as the
AD test.
Abstract: Sixteen female Holstein calves allocated in three
treatments including: 1: control, 2: fed raw fiber concentrate (RFC)
for 45 days and 3: fed RFC for 90 days. RFC supplement (Vitacel®
200) was added to milk immediately before feeding (10 g/L milk).
Withers height and body weights of calves were measured monthly.
Individual dry matter intake was recorded daily. Blood samples were
taken monthly. The result showed that calves consumed RFC had
significantly greater weaning and final body weight. Treatment effect
on dry matter intake was not significant (p>0.05). Calves fed RFC
had better feed efficiency. Withers height of calves fed RFC were
taller than the control group (p
Abstract: Security has been an important issue and concern in the
smart home systems. Smart home networks consist of a wide range of
wired or wireless devices, there is possibility that illegal access to
some restricted data or devices may happen. Password-based
authentication is widely used to identify authorize users, because this
method is cheap, easy and quite accurate. In this paper, a neural
network is trained to store the passwords instead of using verification
table. This method is useful in solving security problems that
happened in some authentication system. The conventional way to
train the network using Backpropagation (BPN) requires a long
training time. Hence, a faster training algorithm, Resilient
Backpropagation (RPROP) is embedded to the MLPs Neural
Network to accelerate the training process. For the Data Part, 200
sets of UserID and Passwords were created and encoded into binary
as the input. The simulation had been carried out to evaluate the
performance for different number of hidden neurons and combination
of transfer functions. Mean Square Error (MSE), training time and
number of epochs are used to determine the network performance.
From the results obtained, using Tansig and Purelin in hidden and
output layer and 250 hidden neurons gave the better performance. As
a result, a password-based user authentication system for smart home
by using neural network had been developed successfully.
Abstract: The study of the stress distribution on a hollow
cylindrical fiber placed in a composite material is considered in this
work and an analytical solution for this stress distribution has been
constructed. Finally some parameters such as fiber-s thickness and
fiber-s length are considered and their effects on the distribution of
stress have been investigated. For finding the governing relations,
continuity equations for the axisymmetric problem in cylindrical
coordinate (r,o,z) are considered. Then by assuming some conditions
and solving the governing equations and applying the boundary
conditions, an equation relates the stress applied to the representative
volume element with the stress distribution on the fiber has been
found.
Abstract: Employing a recently introduced unified adaptive filter
theory, we show how the performance of a large number of important
adaptive filter algorithms can be predicted within a general framework
in nonstationary environment. This approach is based on energy conservation
arguments and does not need to assume a Gaussian or white
distribution for the regressors. This general performance analysis can
be used to evaluate the mean square performance of the Least Mean
Square (LMS) algorithm, its normalized version (NLMS), the family
of Affine Projection Algorithms (APA), the Recursive Least Squares
(RLS), the Data-Reusing LMS (DR-LMS), its normalized version
(NDR-LMS), the Block Least Mean Squares (BLMS), the Block
Normalized LMS (BNLMS), the Transform Domain Adaptive Filters
(TDAF) and the Subband Adaptive Filters (SAF) in nonstationary
environment. Also, we establish the general expressions for the
steady-state excess mean square in this environment for all these
adaptive algorithms. Finally, we demonstrate through simulations that
these results are useful in predicting the adaptive filter performance.
Abstract: Advances in technology (e.g. the internet,
telecommunication) and political changes (fewer trade barriers and an
enlarged European Union, ASEAN, NAFTA and other organizations)
have led to develop international competition and expand into new
markets. Companies in Thailand, Asia and around the globe are
increasingly being pressured on price and for faster time to enter the
market. At the same time, new markets are appearing and many
companies are looking for changes and shifts in their domestic
markets. These factors have enabled the rapid growth for companies
and globalizing many different business activities during the product
development process from research and development (R&D) to
production.
This research will show and clarify methods how to develop
global product. Also, it will show how important is a global product
impact into Thai Economy development.
Abstract: Sleep stage scoring is the process of classifying the
stage of the sleep in which the subject is in. Sleep is classified into
two states based on the constellation of physiological parameters.
The two states are the non-rapid eye movement (NREM) and the
rapid eye movement (REM). The NREM sleep is also classified into
four stages (1-4). These states and the state wakefulness are
distinguished from each other based on the brain activity. In this
work, a classification method for automated sleep stage scoring
based on a single EEG recording using wavelet packet decomposition
was implemented. Thirty two ploysomnographic recording from the
MIT-BIH database were used for training and validation of the
proposed method. A single EEG recording was extracted and
smoothed using Savitzky-Golay filter. Wavelet packets
decomposition up to the fourth level based on 20th order Daubechies
filter was used to extract features from the EEG signal. A features
vector of 54 features was formed. It was reduced to a size of 25 using
the gain ratio method and fed into a classifier of regression trees. The
regression trees were trained using 67% of the records available. The
records for training were selected based on cross validation of the
records. The remaining of the records was used for testing the
classifier. The overall correct rate of the proposed method was found
to be around 75%, which is acceptable compared to the techniques in
the literature.