Abstract: Nowadays, keyless entry systems are widely adopted
for vehicle immobilizer systems due to both advantages of security and
convenience. Keyless entry systems could overcome brute-force key
guessing attack, statistics attack and masquerade attack, however,
they can't prevent from thieves stealing behavior. In this paper, we
proposed a new architecture try to improve the existent flaws. The
integration of the keyless entry system and the fingerprint
identification technology is more suitable to implement on the
portable transponder to achieve higher security needs. We also adopt
and modify AES security protocol for life expectancy and security of
the portable transponder. In addition, the identification of a driver's
fingerprint makes the service of automatic reinstatement of a driver's
preferences become possible. Our design can satisfy not only the three
kinds of previous illegal attacks, but also the stealing situation.
Furthermore, many practical factors, such as costs, life expectancy and
performance, have been well considered in the design of portable
transponder.
Abstract: In this study, the performance of a high-frequency arc
welding machine including a two-switch inverter is analyzed. The
control of the system is achieved using two different control
techniques i- fuzzy logic control (FLC) ii- state space averaging
based sliding control. Fuzzy logic control does not need accurate
mathematical model of a plant and can be used in nonlinear
applications. The second method needs the mathematical model of
the system. In this method the state space equations of the system are
derived for two different “on" and “off" states of the switches. The
derived state equations are combined with the sliding control rule
considering the duty-cycle of the converter. The performance of the
system is analyzed by simulating the system using SIMULINK tool
box of MATLAB. The simulation results show that fuzzy logic
controller is more robust and less sensitive to parameter variations.
Abstract: In today-s world, the efficient utilization of wood
resources comes more and more to the mind of forest owners. It is a
very complex challenge to ensure an efficient harvest of the wood
resources. This is one of the scopes the project “Virtual Forest II"
addresses. Its core is a database with data about forests containing
approximately 260 million trees located in North Rhine-Westphalia
(NRW). Based on this data, tree growth simulations and wood
mobilization simulations can be conducted. This paper focuses on the
latter. It describes a discrete-event-simulation with an attached 3-D
real time visualization which simulates timber harvest using trees
from the database with different crop resources. This simulation can
be displayed in 3-D to show the progress of the wood crop. All the
data gathered during the simulation is presented as a detailed
summary afterwards. This summary includes cost-benefit
calculations and can be compared to those of previous runs to
optimize the financial outcome of the timber harvest by exchanging
crop resources or modifying their parameters.
Abstract: Recent fifteen years witnessed fast improvements in the field of humanoid robotics. The human-like robot structure is
more suitable to human environment with its supreme obstacle avoidance properties when compared with wheeled service robots.
However, the walking control for bipedal robots is a challenging task
due to their complex dynamics. Stable reference generation plays a very important role in control.
Linear Inverted Pendulum Model (LIPM) and the Zero Moment Point (ZMP) criterion are applied in a number of studies for stable
walking reference generation of biped walking robots. This paper follows this main approach too. We propose a natural and continuous ZMP reference trajectory for a stable and human-like walk. The ZMP reference trajectories move forward under the sole of the support foot when the robot body is supported by a single leg. Robot center of mass trajectory is obtained
from predefined ZMP reference trajectories by a Fourier series
approximation method. The Gibbs phenomenon problem common with Fourier approximations of discontinuous functions is avoided by employing continuous ZMP references. Also, these ZMP reference
trajectories possess pre-assigned single and double support phases,
which are very useful in experimental tuning work.
The ZMP based reference generation strategy is tested via threedimensional
full-dynamics simulations of a 12-degrees-of-freedom
biped robot model. Simulation results indicate that the proposed reference trajectory generation technique is successful.
Abstract: This paper will present the implementation of QoS
policy based system by utilizing rules on Access Control List (ACL)
over Layer 3 (L3) switch. Also presented is the architecture on that
implementation; the tools being used and the result were gathered.
The system architecture has an ability to control ACL rules which are
installed inside an external L3 switch. ACL rules used to instruct the
way of access control being executed, in order to entertain all traffics
through that particular switch. The main advantage of using this
approach is that the single point of failure could be prevented when
there are any changes on ACL rules inside L3 switches. Another
advantage is that the agent could instruct ACL rules automatically
straight away based on the changes occur on policy database without
configuring them one by one. Other than that, when QoS policy
based system was implemented in distributed environment, the
monitoring process can be synchronized easily due to the automate
process running by agent over external policy devices.
Abstract: Retrieval of the surface reflectance is important in the
remotely sensed data analysis to obtain the atmospheric reflectance or
atmospheric correction. The relationship between visible and mid
infrared reflectance over land was investigated and developed in this
study. The surface reflectances of the two visible bands were
measured using a handheld spectroradiometer collected around
Penang Island. In this study, we use the assumption that the 2.1 μm
band is not affected by aerosol and it is transparent to most aerosol
types (except dust). Therefore the satellite observed signal is the
same as the surface signal in 2.1 μm band. The correlation between
the surface reflectance measured by the spectroradiometer in the blue
and red region and the 2.1 μm observed by the satellite has been
established. We investigate five dates of Landsat TM scenes in this
study. The finding obtained by this study indicates that the surface
reflectance can be retrieved from the 2.1 μm band.
Abstract: Proton transfer and hydrogen bonding are two aspects
of the chemistry of hydrogen that respectively govern the behaviour
and structure of many molecules, both simple and complex. All the
theoretical enol and keto conformations of 1,3-diphenyl-1,3-
propandion known as dibenzoylmethane (DBM), have been
investigated by means of atoms in molecules (AIM) theory. It was
found that the most stable conformers are those stabilized by
hydrogen bridges.The aim of the present paper is a thorough
conformational analysis of DBM (with special attention on chelated
cis-enol conformers) in order to obtain detailed information on the
geometrical parameters, relative stabilities and rotational motion of
the phenyl groups. It is also important to estimate the barrier height
for ptoton transfer and hydrogen bond strength, which are the main
factors governing conformational stability.
Abstract: Polypropylene blended with natural oil and pigment additives has been studied. Different formulations for each compound were made into polybag used for cultivation of oil palm seedlings for strength and mechanical properties studies. One group of sample was exposed under normal sunlight to initiate degradation and another group of sample was placed under shaded area for five months. All samples were tested for tensile strength to determine the degradation effects. The tensile strength of directly exposed sunlight samples and shaded area showed up to 50% and 25% degradation respectively. However, similar reduction of Young’s modulus for all samples was found for both exposures. Structural investigations were done using FTIR to detect deformation. The natural additives that were used in the studies were all natural and environmental friendly
Abstract: The power system network is becoming more
complex nowadays and it is very difficult to maintain the stability
of the system. Today-s enhancement of technology makes it
possible to include new energy storage devices in the electric
power system. In addition, with the aid of power electronic
devices, it is possible to independently exchange active and
reactive power flow with the utility grid. The main purpose of this
paper proposes a Proportional – Integral (PI) control based 48 –
pulse Inverter based Static Synchronous Series Compensator
(SSSC) with and without Superconducting Magnetic Energy
Storage (SMES) used for enhancing the transient stability and
regulating power flow in automatic mode. Using a test power
system through the dynamic simulation in Matlab/Simulink
platform validates the performance of the proposed SSSC with and
without SMES system.
Abstract: Using ab initio theoretical calculations, we present
analysis of fragmentation process. The analysis is performed in two
steps. The first step is calculation of fragmentation energies by ab
initio calculations. The second step is application of the energies to
kinetic description of process. The energies of fragments are
presented in this paper. The kinetics of fragmentation process can be
described by numerical models. The method for kinetic analysis is
described in this paper. The result - composition of fragmentation
products - will be calculated in future. The results from model can be
compared to the concentrations of fragments from mass spectrum.
Abstract: This work proposes a set of actions to assist redesign
procedure in existing products of Electric and Electronic Equipment
(EEE). The aim is to improve their environmental behavior after their
withdrawal in the End-of-Life (EOL) phase. In the beginning data
collection takes place. Then follows selection and implementation of
the optimal EOL Treatment Strategy (EOL_TS) and its results-
evaluation concerning the environment. In parallel, product design
characteristics that can be altered are selected based on their
significance for the environment in the EOL stage. All results from
the previous stages are combined and possible redesign actions are
formulated for further examination and afterwards configuration in
the design stage. The applied method to perform these tasks is Lean
Thinking (LT). At the end, results concerning the application of the
proposed method on a distribution transformer are presented.
Abstract: Although the Vietnamese catfish farming has grown
at very high rates in recent years, the industry has also faced many
problems affecting its sustainability. This paper studies the
perceptions of catfish farmers regarding risk and risk management
strategies in their production activities. Specifically, the study aims
to measure the consequences, likelihoods, and levels of risks as well
as the efficacy of risk management in Vietnamese catfish farming.
Data for the study were collected through a sample of 261 catfish
farmers in the Mekong Delta, Vietnam using a questionnaire survey
in 2008. Results show that, in general, price and production risks
were perceived as the most important risks. Farm management and
technical measures were perceived more effective than other kinds of
risk management strategies in risk reduction. Although price risks
were rated as important risks, price risk management strategies were
not perceived as important measures for risk mitigation. The results
of the study are discussed to provide implications for various
industry stakeholders, including policy makers, processors, advisors,
and developers of new risk management strategies.
Abstract: In today-s competitive market, most companies
develop manufacturing systems that can help in cost reduction and
maximum quality. Human issues are an important part of
manufacturing systems, yet most companies ignore their effects on
production performance. This paper aims to developing an integrated
workforce planning system that incorporates the human being.
Therefore, a multi-objective mixed integer nonlinear programming
model is developed to determine the amount of hiring, firing,
training, overtime for each worker type. This paper considers a
workforce planning model including human aspects such as skills,
training, workers- personalities, capacity, motivation, and learning
rates. This model helps to minimize the hiring, firing, training and
overtime costs, and maximize the workers- performance. The results
indicate that the workers- differences should be considered in
workforce scheduling to generate realistic plans with minimum costs.
This paper also investigates the effects of human learning rates on the
performance of the production systems.
Abstract: In this study, we present a new and fast algorithm for lung segmentation using CTA images. This process is quite important especially at lung vessel segmentation, detection of pulmonary emboly, finding nodules or segmentation of airways. Applied method has been carried out at four steps. At first step, images have been applied optimal threshold. At the second one, the subsegment vessels, which have a place in lung region and which are in small dimension, have been removed. At the third one, identifying and segmentation of lungs and airway edges have been carried out. Lastly, by throwing away the airway, lung segmentation has been presented.
Abstract: The periodic mixed convection of a water-copper
nanofluid inside a rectangular cavity with aspect ratio of 3 is
investigated numerically. The temperature of the bottom wall of the
cavity is assumed greater than the temperature of the top lid which
oscillates horizontally with the velocity defined as u = u0 sin (ω t).
The effects of Richardson number, Ri, and volume fraction of
nanoparticles on the flow and thermal behavior of the nanofluid are
investigated. Velocity and temperature profiles, streamlines and
isotherms are presented. It is observed that when Ri < 1, heat transfer
rate is much greater than when Ri > 1. The higher value of Ri
corresponds to a lower value of the amplitude of the oscillation of
Num in the steady periodic state. Moreover, increasing the volume
fraction of the nanoparticles increases the heat transfer rate.
Abstract: Soft set theory was initiated by Molodtsov in 1999. In the past years, this theory had been applied to many branches of mathematics, information science and computer science. In 2003, Maji et al. introduced some operations of soft sets and gave some operational rules. Recently, some of these operational rules are pointed out to be not true. Furthermore, Ali et al., in their paper, introduced and discussed some new operations of soft sets. In this paper, we further investigate these operational rules given by Maji et al. and Ali et al.. We obtain some sufficient-necessary conditions such that corresponding operational rules hold and give correct forms for some operational rules. These results will be help for us to use rightly operational rules of soft sets in research and application of soft set theory.
Abstract: The present paper is a case study about exploitation of
Kheir Abad river (Khoozestan, Iran) water resources and the
problems caused by river sediments around the pumping stations.
The weak points and strong points of Boneh Basht pumping station
have been studied by experienced experts, work teams, and
consulting engineers and technical and executive solutions have been
suggested. Therefore, the suggestions of this article are based on the
performed studies and are proposed in order to evaluate the logical
solutions.
Rather complicated processes resulting from the interaction of
water flows and sediments observed at Boneh Basht pumping station
occur at other pumping stations in almost the same way. Therefore,
Boneh Basht pumping station can be selected as a sample (pilot) and
up-to-date theories and experiences can be applied to this station and
the results can be offered to other stations.
Abstract: Learning using labeled and unlabelled data has
received considerable amount of attention in the machine learning
community due its potential in reducing the need for expensive
labeled data. In this work we present a new method for combining
labeled and unlabeled data based on classifier ensembles. The model
we propose assumes each classifier in the ensemble observes the
input using different set of features. Classifiers are initially trained
using some labeled samples. The trained classifiers learn further
through labeling the unknown patterns using a teaching signals that is
generated using the decision of the classifier ensemble, i.e. the
classifiers self-supervise each other. Experiments on a set of object
images are presented. Our experiments investigate different classifier
models, different fusing techniques, different training sizes and
different input features. Experimental results reveal that the proposed
self-supervised ensemble learning approach reduces classification
error over the single classifier and the traditional ensemble classifier
approachs.
Abstract: The commercial white tyres are usually used for forklifts in food and medicine industries. Conventionally, silica is used as reinforcement in the tyres. However, the adhesion between silica particles and rubber is remarkably poor. To improve the problem of adhesion and hence enhance wear resistance, modification of silica surface is one of the solutions. In this work, the natural rubber compound blending with polyisoprene-coated silica prepared by admicellar polymerization technique was studied to compare with the natural rubber compound of unmodified silica. The surface characterization of modified silica was also examined by SEM, FTIR, and TGA. The results show that polyisoprene-coated silica/natural rubber compound gave better overall mechanical properties, especially wear resistance with the improvement of the adhesion between silica and natural rubber matrix that can be seen in the SEM micrograph.
Abstract: To coop with urbanization issues and the economic need for expansion, the city of Jakarta is planning to reclaim more land in the Jakarta Bay. However, the reclamation activities of some islands have barely started and already the developers are facing difficulties in finding sufficient quantities of sand as fill material. When addressing the problem of sand scarcity in the case of Jakarta where, an excess of waste production, an inadequate solid waste management system and a lack of dumping ground pose a major problem, it is hard not to think of the use of waste as alternative fill material. This paper analyses the possibilities of using waste in the land reclamation projects, considering the governmental, social, environmental and economic context of the city. The results identify types of waste that could be used, ways of using those types of waste and implementation conditions for the city of Jakarta.