Abstract: A code has been developed in Mathematica using
Direct Simulation Monte Carlo (DSMC) technique. The code was
tested for 2-D air flow around a circular cylinder. Same geometry
and flow properties were used in FLUENT 6.2 for comparison. The
results obtained from Mathematica simulation indicated significant
agreement with FLUENT calculations, hence providing insight into
particle nature of fluid flows.
Abstract: Some theoretical and experimental aspects related to
the conceptual analyses concerning the direct correspondence
identification between the shape, area and orientation of plantar
pressure and obtaining adequate corrective insoles by rapid
prototyping are presented in this paper. In the first part of the paper
there is the theoretical-correlative concept, which is the fundament of
correspondence deduction between plantar surface characteristics and
respectively corrective insoles. In the second part of the paper the
experimental equipment used to analyze and perform the
correspondence stages and then the integral ones between the
analyzed foot shapes and the ones with corrective insoles is
presented. In the final parte the results used to adapt the insoles
obtained by rapid prototyping but also some specific aspects and
conclusions of the conceptual analysis of direct and rapid
correspondence are shown.
Abstract: There are extensive applications of lithium
bromide-water absorption chillers in industry, but the heat exchangers
corrosion and refrigerating capacity loss are very difficult to be solved.
In this paper, an experiment was conducted by using plastic heat
transfer tubes instead of copper tubes. As an example, for a lithium
bromide-water absorption chiller of refrigerating capacity of 35kW,
the correlative performance of the lithium bromide-water absorption
chiller using plastic heat transfer tubes was compared with the
traditional lithium bromide-water absorption chiller. And then the
following three aspects, i.e., heat transfer area, pipe resistance, and
safety strength, are analyzed. The results show that plastic heat
transfer tubes can be used on lithium bromide-water absorption
chillers, and its prospect is very optimistic.
Abstract: The main purpose of the research is to address the role of psychological harassment behaviors (mobbing) to which employees are exposed and personality characteristics over work alienation. Research population was composed of the employees of Provincial Special Administration. A survey with four sections was created to measure variables and reach out the basic goals of the research. Correlation and step-wise regression analyses were performed to investigate the separate and overall effects of sub-dimensions of psychological harassment behaviors and personality characteristic on work alienation of employees. Correlation analysis revealed significant but weak relationships between work alienation and psychological harassment and personality characteristics. Step-wise regression analysis revealed also significant relationships between work alienation variable and assault to personality, direct negative behaviors (sub dimensions of mobbing) and openness (sub-dimension of personality characteristics). Each variable was introduced into the model step by step to investigate the effects of significant variables in explaining the variations in work alienation. While the explanation ratio of the first model was 13%, the last model including three variables had an explanation ratio of 24%.
Abstract: Let T and S be a subspace of Cn and Cm, respectively.
Then for A ∈ Cm×n satisfied AT ⊕ S = Cm, the generalized
inverse A(2)
T,S is given by A(2)
T,S = (PS⊥APT )†. In this paper, a
finite formulae is presented to compute generalized inverse A(2)
T,S
under the concept of restricted inner product, which defined as <
A,B >T,S=< PS⊥APT,B > for the A,B ∈ Cm×n. By this
iterative method, when taken the initial matrix X0 = PTA∗PS⊥, the
generalized inverse A(2)
T,S can be obtained within at most mn iteration
steps in absence of roundoff errors. Finally given numerical example
is shown that the iterative formulae is quite efficient.
Abstract: Membrane distillation (MD) is a rising technology for
seawater or brine desalination process. In this work, an air gap
membrane distillation (AGMD) performance was investigated for
aqueous NaCl solution along with natural ground water and seawater.
In order to enhance the performance of the AGMD process in
desalination, that is, to get more flux, it is necessary to study the
effect of operating parameters on the yield of distillate water. The
influence of operational parameters such as feed flow rate, feed
temperature, feed salt concentration, coolant temperature and air gap
thickness on the membrane distillation (MD) permeation flux have
been investigated for low and high salt solution. the natural
application of ground water and seawater over 90 h continuous
operation, scale deposits observed on the membrane surface and
reduction in flux represents 23% for ground water and 60% for
seawater, in 90 h. This reduction was eliminated (less than 14 %) by
acidification of feed water. Hence, promote the research attention in
apply of AGMD for the ground water as well as seawater
desalination over today-s conventional RO operation.
Abstract: The small interfering RNA (siRNA) alters the
regulatory role of mRNA during gene expression by translational
inhibition. Recent studies show that upregulation of mRNA because
serious diseases like cancer. So designing effective siRNA with good
knockdown effects plays an important role in gene silencing. Various
siRNA design tools had been developed earlier. In this work, we are
trying to analyze the existing good scoring second generation siRNA
predicting tools and to optimize the efficiency of siRNA prediction
by designing a computational model using Artificial Neural Network
and whole stacking energy (%G), which may help in gene silencing
and drug design in cancer therapy. Our model is trained and tested
against a large data set of siRNA sequences. Validation of our results
is done by finding correlation coefficient of experimental versus
observed inhibition efficacy of siRNA. We achieved a correlation
coefficient of 0.727 in our previous computational model and we
could improve the correlation coefficient up to 0.753 when the
threshold of whole tacking energy is greater than or equal to -32.5
kcal/mol.
Abstract: Unsteady natural convection and heat transfer in a square cavity partially filled with porous media using a thermal
non-equilibrium model is studied in this paper. The left vertical wall is
maintained at a constant hot temperature Th and the right vertical wall
is maintained at a constant cold temperature Tc, while the horizontal
walls are adiabatic. The governing equations are obtained by applying
the Darcy model and Boussinesq approximation. COMSOL’s finite
element method is used to solve the non-dimensional governing
equations together with specified boundary conditions. The governing
parameters of this study are the Rayleigh number (Ra = 10^5, and Ra = 10^6 ), Darcy namber (Da = 10^−2, and Da = 10^−3),
the modified thermal conductivity ratio (10^−1 ≤ γ ≤ 10^4), the inter-phase heat transfer coefficien (10^−1 ≤ H ≤ 10^3) and the
time dependent (0.001 ≤ τ ≤ 0.2). The results presented for
values of the governing parameters in terms of streamlines in both
fluid/porous-layer, isotherms of fluid in fluid/porous-layer, isotherms
of solid in porous layer, and average Nusselt number.
Abstract: Environmental investments, including ecological
projects, relating to the protection of atmosphere are today a need.
However, investing in the environment should be based on rational
management rules. This comes across a problem of selecting a
method to assess substances reduced during projects. Therefore, a
method allowing for the assessment of decision rationality has to be
found.
The purpose of this article is to present and systematise pollution
reduction assessment methods and illustrate theoretical analyses with
empirical data.
Empirical results confirm theoretical considerations, which proved
that the only method for judging pollution reduction, free of apparent
disadvantages, is the Eco 99-ratio method. To make decisions on
environmental projects, financing institutions should take into
account a rationality rule. Therefore the Eco 99-ratio method could
be applied to make decisions relating to environmental investments in
the area of air protection.
Abstract: As the performance of the filtering system depends
upon the accuracy of the noise detection scheme, in this paper, we
present a new scheme for impulse noise detection based on two
levels of decision. In this scheme in the first stage we coarsely
identify the corrupted pixels and in the second stage we finally
decide whether the pixel under consideration is really corrupt or not.
The efficacy of the proposed filter has been confirmed by extensive
simulations.
Abstract: The aim of this study was to develop a storm water quality improvement strategy plan (WQISP) which assists managers and decision makers of local city councils in enhancing their activities to improve regional water quality. City of Gosnells in Western Australia has been considered as a case study. The procedure on developing the WQISP consists of reviewing existing water quality data, identifying water quality issues in the study areas and developing a decision making tool for the officers, managers and decision makers. It was found that land use type is the main factor affecting the water quality. Therefore, activities, sources and pollutants related to different land use types including residential, industrial, agricultural and commercial are given high importance during the study. Semi-structured interviews were carried out with coordinators of different management sections of the regional councils in order to understand the associated management framework and issues. The issues identified from these interviews were used in preparing the decision making tool. Variables associated with the defined “value versus threat" decision making tool are obtained from the intensive literature review. The main recommendations provided for improvement of water quality in local city councils, include non-structural, structural and management controls and potential impacts of climate change.
Abstract: The thermal expansion behaviour of silicon carbide
(SCS-2) fibre reinforced 6061 aluminium matrix composite subjected
to the influenced thermal mechanical cycling (TMC) process were
investigated. The thermal stress has important effect on the
longitudinal thermal expansion coefficient of the composites. The
present paper used experimental data of the thermal expansion
behaviour of a SiC/Al composite for temperatures up to 370°C, in
which their data was used for carrying out modelling of theoretical
predictions.
Abstract: In this paper, Land Marks for Unique Addressing( LMUA) algorithm is develped to generate unique ID for each and every node which leads to the formation of overlapping/Non overlapping clusters based on unique ID. To overcome the draw back of the developed LMUA algorithm, the concept of clustering is introduced. Based on the clustering concept a Land Marks for Unique Addressing and Clustering(LMUAC) Algorithm is developed to construct strictly non-overlapping clusters and classify those nodes in to Cluster Heads, Member Nodes, Gate way nodes and generating the Hierarchical code for the cluster heads to operate in the level one hierarchy for wireless communication switching. The expansion of the existing network can be performed or not without modifying the cost of adding the clusterhead is shown. The developed algorithm shows one way of efficiently constructing the
Abstract: The antimicrobial, antiplasmid and cytotoxic activities of marine algae Halimeda opuntia and Sarconema filiforme were investigated. Antimicrobial bioassay against some human pathogenic bacteria and yeast were conducted using disc diffusion method. Halimeda extract exhibited antibacterial activity against six species of microrganisms, with significant inhibition against Staphylococcus aureus. While Sarconema extract was better potent as antifungal against Candida albicans. Comparative antibacterial studies showed that Halimeda extract showed equivalent or better activity as compared with commercial antibiotic when tested against Staphylococcus aureus. Further tests conducted using dilution method showed both extracts as having bacteriostatic mode of action against the tested microorganisms. Methanol extract of two species showed significant cytotoxicity (LC50
Abstract: The identification and classification of weeds are of
major technical and economical importance in the agricultural
industry. To automate these activities, like in shape, color and
texture, weed control system is feasible. The goal of this paper is to
build a real-time, machine vision weed control system that can detect
weed locations. In order to accomplish this objective, a real-time
robotic system is developed to identify and locate outdoor plants
using machine vision technology and pattern recognition. The
algorithm is developed to classify images into broad and narrow class
for real-time selective herbicide application. The developed
algorithm has been tested on weeds at various locations, which have
shown that the algorithm to be very effectiveness in weed
identification. Further the results show a very reliable performance
on weeds under varying field conditions. The analysis of the results
shows over 90 percent classification accuracy over 140 sample
images (broad and narrow) with 70 samples from each category of
weeds.
Abstract: Distributed denial-of-service (DDoS) attacks pose a
serious threat to network security. There have been a lot of
methodologies and tools devised to detect DDoS attacks and reduce
the damage they cause. Still, most of the methods cannot
simultaneously achieve (1) efficient detection with a small number of
false alarms and (2) real-time transfer of packets. Here, we introduce
a method for proactive detection of DDoS attacks, by classifying the
network status, to be utilized in the detection stage of the proposed
anti-DDoS framework. Initially, we analyse the DDoS architecture
and obtain details of its phases. Then, we investigate the procedures
of DDoS attacks and select variables based on these features. Finally,
we apply the k-nearest neighbour (k-NN) method to classify the
network status into each phase of DDoS attack. The simulation result
showed that each phase of the attack scenario is classified well and
we could detect DDoS attack in the early stage.
Abstract: This paper investigates the performance of Multiple- Input Multiple-Output (MIMO) feedback system combined with Orthogonal Frequency Division Multiplexing (OFDM). Two types of codebook based channel feedback techniques are used in this work. The first feedback technique uses a combination of both the long-term and short-term channel state information (CSI) at the transmitter, whereas the second technique uses only the short term CSI. The long-term and short-term CSI at the transmitter is used for efficient channel utilization. OFDM is a powerful technique employed in communication systems suffering from frequency selectivity. Combined with multiple antennas at the transmitter and receiver, OFDM proves to be robust against delay spread. Moreover, it leads to significant data rates with improved bit error performance over links having only a single antenna at both the transmitter and receiver. The effectiveness of these techniques has been demonstrated through the simulation of a MIMO-OFDM feedback system. The results have been evaluated for 4x4 MIMO channels. Simulation results indicate the benefits of the MIMO-OFDM channel feedback system over the one without incorporating OFDM. Performance gain of about 3 dB is observed for MIMO-OFDM feedback system as compared to the one without employing OFDM. Hence MIMO-OFDM becomes an attractive approach for future high speed wireless communication systems.
Abstract: The globe Sustainability has become the subject of international attention, the key reason is that global climate change. Climate and disasters around the abnormal frequency multiplier, the global temperature of the catastrophe and disaster continue to occur throughout the world, as well as countries around the world. Currently there are many important international conferences and policy, it is a "global environmental sustainability " and "living human health " as the goal of development, including the APEC 2007 meeting to "climate Clean Energy" as the theme Sydney Declaration, 2008 World Economic Forum's "Carbon - promote Cool Earth energy efficiency improvement project", the EU proposed "Green Idea" program, the Japanese annual policy, "low-carbon society, sustainable eco-city environment (Eco City) "And from 2009 to 2010 to promote the "Eco-Point" to promote green energy and carbon reduction products .And the 2010 World Climate Change Conference (COP16 United Nations Climate Change Conference Copenhagen), the world has been the subject of Negative conservative "Environmental Protection ", "save energy consumption, " into a positive response to the "Sustainable " and" LOHAS", while Taiwan has actively put forward eco-cities, green building, green building materials and other related environmental response Measures, especially green building construction environment that is the basis of factors, the most widely used application level, and direct contact with human health and the key to sustainable planet. "Sustainable development "is a necessary condition for continuation of the Earth, "healthy and comfortable" is a necessary condition for the continuation of life, and improve the "quality" is a necessary condition for economic development, balance between the three is "to enhance the efficiency of ", According to the World Business Council for Sustainable Development (WBCSD) for the "environmental efficiency "(Eco-Efficiency) proposed: " the achievement of environmental efficiency, the price to be competitive in the provision of goods or services to meet people's needs, improve living Quality at the same time, the goods or services throughout the life cycle. Its impact on the environment and natural resource utilization and gradually reduced to the extent the Earth can load. "whichever is the economy "Economic" and " Ecologic". The research into the methodology to obtain the Taiwan Green Building Material Labeling product as the scope of the study, by investigating and weight analysis to explore green building environmental load (Ln) factor and the Green Building Quality (Qn) factor to Establish green building environmental efficiency assessment model (GBM Eco-Efficiency). And building materials for healthy green label products for priority assessment object, the object is set in the material evidence for the direct response to the environmental load from the floor class-based, explicit feedback correction to the Green Building environmental efficiency assessment model, "efficiency " as a starting point to achieve balance between human "health "and Earth "sustainable development of win-win strategy. The study is expected to reach 1.To establish green building materials and the quality of environmental impact assessment system, 2. To establish value of GBM Eco-Efficiency model, 3. To establish the GBM Eco-Efficiency model for application of green building material feedback mechanisms.
Abstract: The authors have been developing several models
based on artificial neural networks, linear regression models, Box-
Jenkins methodology and ARIMA models to predict the time series
of tourism. The time series consist in the “Monthly Number of Guest
Nights in the Hotels" of one region. Several comparisons between the
different type models have been experimented as well as the features
used at the entrance of the models. The Artificial Neural Network
(ANN) models have always had their performance at the top of the
best models. Usually the feed-forward architecture was used due to
their huge application and results. In this paper the author made a
comparison between different architectures of the ANNs using
simply the same input. Therefore, the traditional feed-forward
architecture, the cascade forwards, a recurrent Elman architecture and
a radial based architecture were discussed and compared based on the
task of predicting the mentioned time series.
Abstract: The incorporation of computational fluid dynamics in the design of modern hydraulic turbines appears to be necessary in order to improve their efficiency and cost-effectiveness beyond the traditional design practices. A numerical optimization methodology is developed and applied in the present work to a Turgo water turbine. The fluid is simulated by a Lagrangian mesh-free approach that can provide detailed information on the energy transfer and enhance the understanding of the complex, unsteady flow field, at very small computing cost. The runner blades are initially shaped according to hydrodynamics theory, and parameterized using Bezier polynomials and interpolation techniques. The use of a limited number of free design variables allows for various modifications of the standard blade shape, while stochastic optimization using evolutionary algorithms is implemented to find the best blade that maximizes the attainable hydraulic efficiency of the runner. The obtained optimal runner design achieves considerably higher efficiency than the standard one, and its numerically predicted performance is comparable to a real Turgo turbine, verifying the reliability and the prospects of the new methodology.