Abstract: This paper considers inference under progressive type II censoring with a compound Rayleigh failure time distribution. The maximum likelihood (ML), and Bayes methods are used for estimating the unknown parameters as well as some lifetime parameters, namely reliability and hazard functions. We obtained Bayes estimators using the conjugate priors for two shape and scale parameters. When the two parameters are unknown, the closed-form expressions of the Bayes estimators cannot be obtained. We use Lindley.s approximation to compute the Bayes estimates. Another Bayes estimator has been obtained based on continuous-discrete joint prior for the unknown parameters. An example with the real data is discussed to illustrate the proposed method. Finally, we made comparisons between these estimators and the maximum likelihood estimators using a Monte Carlo simulation study.
Abstract: Fault tree analysis is a well-known method for
reliability and safety assessment of engineering systems. In the last 3
decades, a number of methods have been introduced, in the literature,
for automatic construction of fault trees. The main difference between these methods is the starting model from which the tree is constructed. This paper presents a new methodology for the construction of static and dynamic fault trees from a system Simulink
model. The method is introduced and explained in detail, and its correctness and completeness is experimentally validated by using an example, taken from literature. Advantages of the method are also mentioned.
Abstract: Cylindrical concrete reservoirs are appropriate choice
for storing liquids as water, oil and etc. By using of the pre-cast
concrete reservoirs instead of the in-situ constructed reservoirs, the
speed and precision of the construction would considerably increase.
In this construction method, wall and roof panels would make in
factory with high quality materials and precise controlling. Then,
pre-cast wall and roof panels would carry out to the construction site
for assembling. This method has a few faults such as: the existing
weeks in connection of wall panels together and wall panels to
foundation. Therefore, these have to be resisted under applied loads
such as seismic load. One of the innovative methods which was
successfully applied for seismic retrofitting of numerous pre-cast
cylindrical water reservoirs in New Zealand, using of the high tensile
cables around the reservoirs and post-tensioning them. In this paper,
analytical modeling of wall and roof panels and post-tensioned
cables are carried out with finite element method and the effect of
height to diameter ratio, post-tensioning force value, liquid level in
reservoir, installing position of tendons on seismic response of
reservoirs are investigated.
Abstract: In this research, the flow pattern influence on
performance of a micro PEMFC was investigated
experimentally. The investigation focused on the impacts of
bend angels and rib/channel dimensions of serpentine flow
channel pattern on the performance and investigated how they
improve the performance. The fuel cell employed for these
experiments was a micro single PEMFC with a membrane of
1.44 cm2 Nafion NRE-212. The results show that 60° and 120°
bend angles can provide the better performances at 20 and 40
sccm inlet flow rates comparing to that the conventional design.
Additionally, wider channel with narrower rib spacing gives
better performance. These results may be applied to develop
universal heuristics for the design of flow pattern of micro
PEMFC.
Abstract: This paper proposes an easy-to-use instruction hiding
method to protect software from malicious reverse engineering
attacks. Given a source program (original) to be protected, the
proposed method (1) takes its modified version (fake) as an input,
(2) differences in assembly code instructions between original and
fake are analyzed, and, (3) self-modification routines are introduced
so that fake instructions become correct (i.e., original instructions)
before they are executed and that they go back to fake ones after
they are executed. The proposed method can add a certain amount
of security to a program since the fake instructions in the resultant
program confuse attackers and it requires significant effort to discover
and remove all the fake instructions and self-modification routines.
Also, this method is easy to use (with little effort) because all a user
(who uses the proposed method) has to do is to prepare a fake source
code by modifying the original source code.
Abstract: Axisymmetric vibration of an infinite Pyrocomposite
circular hollow cylinder made of inner and outer pyroelectric layer of
6mm-class bonded together by a Linear Elastic Material with Voids
(LEMV) layer is studied. The exact frequency equation is obtained
for the traction free surfaces with continuity condition at the
interfaces. Numerical results in the form of data and dispersion
curves for the first and second mode of the axisymmetric vibration of
the cylinder BaTio3 / Adhesive / BaTio3 by taking the Adhesive layer
as an existing Carbon Fibre Reinforced Polymer (CFRP) are
compared with a hypothetical LEMV layer with and without voids
and as well with a pyroelectric hollow cylinder. The damping is
analyzed through the imaginary parts of the complex frequencies.
Abstract: The purposes of this research were 1) to study
consumer-based equity of luxury brands, 2) to study consumers-
purchase intention for luxury brands, 3) to study direct factors
affecting purchase intention towards luxury brands, and 4) to study
indirect factors affecting purchase intention towards luxury brands
through brand consciousness and brand equity to analyze information
by descriptive statistic and hierarchical stepwise regression analysis.
The findings revealed that the eight variables of the framework which
were: need for uniqueness, normative susceptibility, status
consumption, brand consciousness, brand awareness, perceived
quality, brand association, and brand loyalty affected the purchase
intention of the luxury brands (at the significance of 0.05). Brand
Loyalty had the strongest direct effect while status consumption had
the strongest indirect effect affecting the purchase intention towards
luxury brands. Brand consciousness and brand equity had the
mediators through the purchase intention of the luxury brands (at the
significance of 0.05).
Abstract: The genre of fantasy depicts a world of imagine that triggers popular interest from a created view of world, and a fantasy is defined as a story that illustrates a world of imagine where scientific or horror elements are stand in its center. This study is not focused on the narrative of the fantasy, i.e. not on the adventurous story, but is concentrated on the image of the fantasy to work on its relationship with intended themes and differences among cultures due to meanings of materials. As for films, we have selected some films in the 2000's that are internationally recognized as expressing unique images of fantasy containing the theme of love in them. The selected films are 5 pieces including two European films, Amelie from Montmartre (2001) and The Science of Sleep (2005) and three Asian films, Citizen Dog from Thailand (2004), Memories of Matsuko from Japan (2006), and I'm a Cyborg, but That's OK from Korea (2006). These films share some common characteristics to the effect that they give tiny lessons and feelings for life with expressions of fantasy images as if they were fairy tales for adults and that they lead the audience to reflect on their days and revive forgotten dreams of childhood. We analyze the images of fantasy in each of the films on the basis of the elements of Mise-en-Scène (setting and props, costume, hair and make-up, facial expressions and body language, lighting and color, positioning of characters, and objects within a frame).
Abstract: This work aims to reduce the read power consumption
as well as to enhance the stability of the SRAM cell during the read
operation. A new 10-transisor cell is proposed with a new read
scheme to minimize the power consumption within the memory core.
It has separate read and write ports, thus cell read stability is
significantly improved. A 16Kb SRAM macro operating at 1V
supply voltage is demonstrated in 65 nm CMOS process. Its read
power consumption is reduced to 24% of the conventional design.
The new cell also has lower leakage current due to its special bit-line
pre-charge scheme. As a result, it is suitable for low-power mobile
applications where power supply is restricted by the battery.
Abstract: A high precision temperature insensitive current and voltage reference generator is presented. It is specifically developed for temperature compensated oscillator. The circuit, designed using MXIC 0.5um CMOS technology, has an operating voltage that ranges from 2.6V to 5V and generates a voltage of 1.21V and a current of 6.38 ӴA. It exhibits a variation of ±0.3nA for the current reference and a stable output for voltage reference as the temperature is varied from 0°C to 70°C. The power supply rejection ratio obtained without any filtering capacitor at 100Hz and 10MHz is -30dB and -12dB respectively.
Abstract: The purpose of this paper primarily intends to develop GIS interface for estimating sequences of stream-flows at ungauged stations based on known flows at gauged stations. The integrated GIS interface is composed of three major steps. The first, precipitation characteristics using statistical analysis is the procedure for making multiple linear regression equation to get the long term mean daily flow at ungauged stations. The independent variables in regression equation are mean daily flow and drainage area. Traditionally, mean flow data are generated by using Thissen polygon method. However, method for obtaining mean flow data can be selected by user such as Kriging, IDW (Inverse Distance Weighted), Spline methods as well as other traditional methods. At the second, flow duration curve (FDC) is computing at unguaged station by FDCs in gauged stations. Finally, the mean annual daily flow is computed by spatial interpolation algorithm. The third step is to obtain watershed/topographic characteristics. They are the most important factors which govern stream-flows. In summary, the simulated daily flow time series are compared with observed times series. The results using integrated GIS interface are closely similar and are well fitted each other. Also, the relationship between the topographic/watershed characteristics and stream flow time series is highly correlated.
Abstract: Computer based geostatistical methods can offer effective data analysis possibilities for agricultural areas by using
vectorial data and their objective informations. These methods will help to detect the spatial changes on different locations of the large
agricultural lands, which will lead to effective fertilization for optimal yield with reduced environmental pollution. In this study, topsoil (0-20 cm) and subsoil (20-40 cm) samples were taken from a
sugar beet field by 20 x 20 m grids. Plant samples were also collected
from the same plots. Some physical and chemical analyses for these
samples were made by routine methods. According to derived variation coefficients, topsoil organic matter (OM) distribution was more than subsoil OM distribution. The highest C.V. value of
17.79% was found for topsoil OM. The data were analyzed
comparatively according to kriging methods which are also used
widely in geostatistic. Several interpolation methods (Ordinary,Simple and Universal) and semivariogram models (Spherical,
Exponential and Gaussian) were tested in order to choose the suitable
methods. Average standard deviations of values estimated by simple
kriging interpolation method were less than average standard
deviations (topsoil OM ± 0.48, N ± 0.37, subsoil OM ± 0.18) of measured values. The most suitable interpolation method was simple
kriging method and exponantial semivariogram model for topsoil,
whereas the best optimal interpolation method was simple kriging
method and spherical semivariogram model for subsoil. The results
also showed that these computer based geostatistical methods should
be tested and calibrated for different experimental conditions and semivariogram models.
Abstract: XML is an important standard of data exchange and
representation. As a mature database system, using relational database
to support XML data may bring some advantages. But storing XML in
relational database has obvious redundancy that wastes disk space,
bandwidth and disk I/O when querying XML data. For the efficiency
of storage and query XML, it is necessary to use compressed XML
data in relational database. In this paper, a compressed relational
database technology supporting XML data is presented. Original
relational storage structure is adaptive to XPath query process. The
compression method keeps this feature. Besides traditional relational
database techniques, additional query process technologies on
compressed relations and for special structure for XML are presented.
In this paper, technologies for XQuery process in compressed
relational database are presented..
Abstract: Content-Based Image Retrieval (CBIR) has been
one on the most vivid research areas in the field of computer vision
over the last 10 years. Many programs and tools have been
developed to formulate and execute queries based on the visual or
audio content and to help browsing large multimedia repositories.
Still, no general breakthrough has been achieved with respect to
large varied databases with documents of difering sorts and with
varying characteristics. Answers to many questions with respect to
speed, semantic descriptors or objective image interpretations are
still unanswered. In the medical field, images, and especially
digital images, are produced in ever increasing quantities and used
for diagnostics and therapy. In several articles, content based
access to medical images for supporting clinical decision making
has been proposed that would ease the management of clinical data
and scenarios for the integration of content-based access methods
into Picture Archiving and Communication Systems (PACS) have
been created. This paper gives an overview of soft computing
techniques. New research directions are being defined that can
prove to be useful. Still, there are very few systems that seem to be
used in clinical practice. It needs to be stated as well that the goal
is not, in general, to replace text based retrieval methods as they
exist at the moment.
Abstract: The role of corporate governance is to reduce the
divergence of interests between shareholders and managers. The role
of corporate governance is more useful when managers have an
incentive to deviate from shareholders- interests. One example of
management-s deviation from shareholders- interests is the
management of earnings through the use of accounting accruals. This
paper examines the association between corporate governance
internal mechanisms ownership concentration, board independence,
the existence of CEO-Chairman duality and earnings management.
Firm size and leverage are control variables. The population used in
this study comprises firms listed on the Tehran Stock Exchange
(TSE) between 2004 and 2008, the sample comprises 196 firms.
Panel Data method is employed as technique to estimate the model.
We find that there is negative significant association between
ownership concentration and board independence manage earnings
with earnings management, there is negative significant association
between the existence of CEO-Chairman duality and earnings
management. This study also found a positive significant association
between control variable (firm size and leverage) and earnings
management.
Abstract: In this paper, the transformers over-load problem of Shiraz substation in Fars Regional Electric Company (FREC) is investigated for a period of three years plan. So the suggestions for using phase shifting transformer (PST) and unified power flow controller (UPFC) in order to solve this problem are examined in details and finally, some economical and practical designs will be given in order to solve the related problems. Practical consideration and using the basic and fundamental concept of powers in transmission lines in order to find the economical design are the main advantages of this research. The simulation results of the integrated overall system with different designs compare them base on economical and practical aspects to solve the over-load and loss-reduction.
Abstract: After presenting the theory of calendar function of
Iran-s cross-vaults especially “Niasar" cross-vault in recent years,
there has been lots of doubts and uncertainty about this theory by
astrologists and archaeologists. According to this theory “Niasar
cross-vault and other cross-vaults of Iran has calendar function and
are constructed in a way that sunrise and sunset can be seen from one
of its openings in the beginning and middle of each season of year".
But, mentioning historical documentaries we conclude here that the
theory of calendar function of Iran-s cross-vaults does not have any
strong basis and individual cross-vaults had only religious function in
Iran.
Abstract: The environmental impact caused by industries is an issue that, in the last 20 years, has become very important in terms of society, economics and politics in Colombia. Particularly, the tannery process is extremely polluting because of uneffective treatments and regulations given to the dumping process and atmospheric emissions. Considering that, this investigation is intended to propose a management model based on the integration of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, that prioritizes the strategic components of the organizations. As a result, a management model will be obtained and it will provide a strategic perspective through a systemic approach to the tanning process. This will be achieved through the use of Multicriteria Decision tools, along with Quality Function Deployment and Fuzzy Logic. The strategic approach that embraces the management model using the alignment of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, is an integrated perspective that allows a gradual frame of the tactical and operative elements through the correct setting of the information flow, improving the decision making process. In that way, Small Medium Enterprises (SMEs) could improve their productivity, competitiveness and as an added value, the minimization of the environmental impact. This improvement is expected to be controlled through a Dashboard that helps the Organization measure its performance along the implementation of the model in its productive process.
Abstract: Because nodes are usually battery-powered, the energy
presents a very scarce resource in wireless sensor networks. For this
reason, the design of medium access control had to take energy
efficiency as one of its hottest concerns. Accordingly, in order to
improve the energy performance of MAC schemes in wireless sensor
networks, several ways can be followed. In fact, some researchers try
to limit idle listening while others focus on mitigating overhearing
(i.e. a node can hear a packet which is destined to another node)
or reducing the number of the used control packets. We, in this
paper, propose a new hybrid MAC protocol termed ELE-MAC
(i.e. Energy Latency Efficient MAC). The ELE-MAC major design
goals are energy and latency efficiencies. It adopts less control
packets than SMAC in order to preserve energy. We carried out ns-
2 simulations to evaluate the performance of the proposed protocol.
Thus, our simulation-s results prove the ELE-MAC energy efficiency.
Additionally, our solution performs statistically the same or better
latency characteristic compared to adaptive SMAC.
Abstract: The value of emission factor was calculated in the
older type of Diesel engine operating on an engine testing bench and
then compared with the parameters monitored under similar
conditions when the EnviroxTM additive was applied. It has been
found out that the additive based on CeO2 nanoparticles reduces
emission of NOx. The dependencies of NOx emissions on reduced
torque, engine power and revolutions have been observed as well.