Abstract: The development of allometric models is crucial to
accurate forest biomass/carbon stock assessment. The aim of this
study was to develop a set of biomass prediction models that will
enable the determination of total tree aboveground biomass for
savannah woodland area in Niger State, Nigeria. Based on the data
collected through biometric measurements of 1816 trees and
destructive sampling of 36 trees, five species specific and one site
specific models were developed. The sample size was distributed
equally between the five most dominant species in the study site
(Vitellaria paradoxa, Irvingia gabonensis, Parkia biglobosa,
Anogeissus leiocarpus, Pterocarpus erinaceous). Firstly, the
equations were developed for five individual species. Secondly these
five species were mixed and were used to develop an allometric
equation of mixed species. Overall, there was a strong positive
relationship between total tree biomass and the stem diameter. The
coefficient of determination (R2 values) ranging from 0.93 to 0.99 P
< 0.001 were realised for the models; with considerable low standard
error of the estimates (SEE) which confirms that the total tree above
ground biomass has a significant relationship with the dbh. F-test
values for the biomass prediction models were also significant at p
Abstract: Robotic surgery is used to enhance minimally invasive
surgical procedure. It provides greater degree of freedom for surgical
tools but lacks of haptic feedback system to provide sense of touch to
the surgeon. Surgical robots work on master-slave operation, where
user is a master and robotic arms are the slaves. Current, surgical
robots provide precise control of the surgical tools, but heavily rely
on visual feedback, which sometimes cause damage to the inner
organs. The goal of this research was to design and develop a realtime
Simulink based robotic system to study force feedback
mechanism during instrument-object interaction. Setup includes three
VelmexXSlide assembly (XYZ Stage) for three dimensional
movement, an end effector assembly for forceps, electronic circuit for
four strain gages, two Novint Falcon 3D gaming controllers,
microcontroller board with linear actuators, MATLAB and Simulink
toolboxes. Strain gages were calibrated using Imada Digital Force
Gauge device and tested with a hard-core wire to measure
instrument-object interaction in the range of 0-35N. Designed
Simulink model successfully acquires 3D coordinates from two
Novint Falcon controllers and transfer coordinates to the XYZ stage
and forceps. Simulink model also reads strain gages signal through
10-bit analog to digital converter resolution of a microcontroller
assembly in real time, converts voltage into force and feedback the
output signals to the Novint Falcon controller for force feedback
mechanism. Experimental setup allows user to change forward
kinematics algorithms to achieve the best-desired movement of the
XYZ stage and forceps. This project combines haptic technology
with surgical robot to provide sense of touch to the user controlling
forceps through machine-computer interface.
Abstract: The detection of moving objects from a video image
sequences is very important for object tracking, activity recognition,
and behavior understanding in video surveillance.
The most used approach for moving objects detection / tracking is
background subtraction algorithms. Many approaches have been
suggested for background subtraction. But, these are illumination
change sensitive and the solutions proposed to bypass this problem
are time consuming.
In this paper, we propose a robust yet computationally efficient
background subtraction approach and, mainly, focus on the ability to
detect moving objects on dynamic scenes, for possible applications in
complex and restricted access areas monitoring, where moving and
motionless persons must be reliably detected. It consists of three
main phases, establishing illumination changes invariance,
background/foreground modeling and morphological analysis for
noise removing.
We handle illumination changes using Contrast Limited Histogram
Equalization (CLAHE), which limits the intensity of each pixel to
user determined maximum. Thus, it mitigates the degradation due to
scene illumination changes and improves the visibility of the video
signal. Initially, the background and foreground images are extracted
from the video sequence. Then, the background and foreground
images are separately enhanced by applying CLAHE.
In order to form multi-modal backgrounds we model each channel
of a pixel as a mixture of K Gaussians (K=5) using Gaussian Mixture
Model (GMM). Finally, we post process the resulting binary
foreground mask using morphological erosion and dilation
transformations to remove possible noise.
For experimental test, we used a standard dataset to challenge the
efficiency and accuracy of the proposed method on a diverse set of
dynamic scenes.
Abstract: Meeting the growth in demand for digital services
such as social media, telecommunications, and business and cloud
services requires large scale data centres, which has led to an increase
in their end use energy demand. Generally, over 30% of data centre
power is consumed by the necessary cooling overhead. Thus energy
can be reduced by improving the cooling efficiency. Air and liquid
can both be used as cooling media for the data centre. Traditional
data centre cooling systems use air, however liquid is recognised as a
promising method that can handle the more densely packed data
centres. Liquid cooling can be classified into three methods; rack heat
exchanger, on-chip heat exchanger and full immersion of the
microelectronics. This study quantifies the improvements of heat
transfer specifically for the case of immersed microelectronics by
varying the CPU and heat sink location. Immersion of the server is
achieved by filling the gap between the microelectronics and a water
jacket with a dielectric liquid which convects the heat from the CPU
to the water jacket on the opposite side. Heat transfer is governed by
two physical mechanisms, which is natural convection for the fixed
enclosure filled with dielectric liquid and forced convection for the
water that is pumped through the water jacket. The model in this
study is validated with published numerical and experimental work
and shows good agreement with previous work. The results show that
the heat transfer performance and Nusselt number (Nu) is improved
by 89% by placing the CPU and heat sink on the bottom of the
microelectronics enclosure.
Abstract: MSMEs are regarded as the sunrise sector of the
Indian economy in view of its large potential for growth and likely
socio economic impact specifically on employment and income
generation. In today’s competitive business environment, global
competition forces companies to continuously seek ways of
improving their products and services. The pressure on organizations
to adapt to new technologies and external threats requires
resourcefulness, creativity and innovation. Market has become more
open, competitive and customers more demanding. Without
continuous technology innovation, no organization can ever remain
competitive. Innovations reflect a critical way in which organizations
respond to either technological or market challenges. The need of the
market is to deliver high quality products through continuous
changing in features in product, improve existing products, reduce
their cost, and improve employee skills, training, technology
infrastructure and financial policies. Therefore, the key factor of
organization’s ability to change is innovation. The study presents a
detailed review of literature on the role of technology innovation in
improving manufacturing performance of industries.
Abstract: In this work, we report, a systematic study on the
structural and optical properties of Pr-doped ZnO nanostructures and
PVA:Zn98Pr2O polymer matrix nanocomposites free standing films.
These particles are synthesized through simple wet chemical route
and solution casting technique at room temperature, respectively.
Structural studies carried out by X-ray diffraction method confirm
that the prepared pure ZnO and Pr doped ZnO nanostructures are in
hexagonal wurtzite structure and the microstrain is increased upon
doping. TEM analysis reveals that the prepared materials are in sheet
like nature. Absorption spectra show free excitonic absorption band
at 370 nm and red shift for the Pr doped ZnO nanostructures. The
PVA:Zn98Pr2O composite film exhibits both free excitonic and PVA
absorption bands at 282 nm. Fourier transform infrared spectral
studies confirm the presence of A1 (TO) and E1 (TO) modes of Zn-O
bond vibration and the formation of polymer composite materials.
Abstract: The concentrations of cadmium and lead in sewage
sludge samples were determined by Atomic Absorption
Spectrometric Method. Samples of sewage sludge were obtained
from three sewage treatment plants localised in Middle Region of
Libya (Misrata, Msallata and Tarhünah cities).
The results shows that, the mean levels of Cadmium for all regions
are ranges from 81 to 123.4 ppm and these values are higher than the
limitations for the international standard which are not registered
more than 50 ppm (dry weight) in USA, Egypt and the EU countries.
While, the lead concentrations are ranged from 8.0 to 189.2 ppm and
all values are within the standard limits which graduated between
(275–613) ppm.
Abstract: Since the initial creation of the Barbie doll in 1959, it
became a symbol of US society. Likewise, the Licca-chan, a Japanese
doll created in 1967, also became a Japanese symbolic doll of Japanese
society. Prior to the introduction of Licca-chan, Barbie was already
marketed in Japan but their sales were dismal. Licca-chan (an actual
name: Kayama Licca) is a plastic doll with a variety of sizes ranging
from 21.0 cm to 29.0 cm which many Japanese girls dream of having.
For over 35 years, the manufacturer, Takara Co., Ltd. has sold over 48
million dolls and has produced doll houses, accessories, clothes, and
Licca-chan video games for the Nintendo DS. Many First-generation
Licca-chan consumers still are enamored with Licca-chan, and go to
Licca-chan House, in an amusement park with their daughters. These
people are called Licca-chan maniacs, as they enjoy touring the
Licca-chan’s factory in Tohoku or purchase various Licca-chan
accessories. After the successful launch of Licca-chan into the
Japanese market, a mixed-like doll from the US and Japan, a doll,
JeNny, was later sold in the same Japanese market by Takara Co., Ltd.
in 1982.
Comparison of these cultural iconic dolls, Barbie and Licca-chan,
are analyzed in this paper. In fact, these dolls have concepts of girls’
dreams. By using concepts of mythology of Jean Baudrillard, these
dolls can be represented idealized images of figures in the products for
consumers, but at the same time, consumers can see products with
different perspectives, which can cause controversy.
Abstract: Fungal mutant strains have produced cellulase and
xylanase enzymes, and have induced high hydrolysis with enhanced
of rice straw. The mutants were obtained by exposing Penicillium
strain to UV-light treatments. Screening and selection after treatment
with UV-light were carried out using cellulolytic and xylanolytic
clear zones method to select the hypercellulolytic and
hyperxylanolytic mutants. These mutants were evaluated for their
cellulase and xylanase enzyme production as well as their abilities for
biodegradation of rice straw. The mutant 12 UV/1 produced 306.21%
and 209.91% cellulase and xylanase, respectively, as compared with
the original wild type strain. This mutant showed high capacity of
rice straw degradation. The effectiveness of tested mutant strain and
that of wild strain was compared in relation to enhancing the
composting process of rice straw and animal manures mixture. The
results obtained showed that the compost product of inoculated
mixture with mutant strain (12 UV/1) was the best compared to the
wild strain and un-inoculated mixture. Analysis of the composted
materials showed that the characteristics of the produced compost
were close to those of the high quality standard compost. The results
obtained in the present work suggest that the combination between
rice straw and animal manure could be used for enhancing the
composting process of rice straw and particularly when applied with
fungal decomposer accelerating the composting process.
Abstract: Previous studies on financial distress prediction choose
the conventional failing and non-failing dichotomy; however, the
distressed extent differs substantially among different financial
distress events. To solve the problem, “non-distressed”, “slightlydistressed”
and “reorganization and bankruptcy” are used in our article
to approximate the continuum of corporate financial health. This paper
explains different financial distress events using the two-stage method.
First, this investigation adopts firm-specific financial ratios, corporate
governance and market factors to measure the probability of various
financial distress events based on multinomial logit models.
Specifically, the bootstrapping simulation is performed to examine the
difference of estimated misclassifying cost (EMC). Second, this work
further applies macroeconomic factors to establish the credit cycle
index and determines the distressed cut-off indicator of the two-stage
models using such index. Two different models, one-stage and
two-stage prediction models are developed to forecast financial
distress, and the results acquired from different models are compared
with each other, and with the collected data. The findings show that the
one-stage model has the lower misclassification error rate than the
two-stage model. The one-stage model is more accurate than the
two-stage model.
Abstract: Power systems are operating under stressed condition
due to continuous increase in demand of load. This can lead to
voltage instability problem when face additional load increase or
contingency. In order to avoid voltage instability suitable size of
reactive power compensation at optimal location in the system is
required which improves the load margin. This work aims at
obtaining optimal size as well as location of compensation in the 39-
bus New England system with the help of Bacteria Foraging and
Genetic algorithms. To reduce the computational time the work
identifies weak candidate buses in the system, and then picks only
two of them to take part in the optimization. The objective function is
based on a recently proposed voltage stability index which takes into
account the weighted average sensitivity index is a simpler and faster
approach than the conventional CPF algorithm. BFOA has been
found to give better results compared to GA.
Abstract: Africa enjoys some of the best solar radiation levels in
the world averaging between 4-6 kWh/m2/day for most of the year
and the global economic and political conditions that tend to make
African countries more dependent on their own energy resources
have caused growing interest in renewable energy based
technologies. However to-date, implementation of modern Energy
Technologies in Africa is still very low especially the use of solar
conversion technologies. This paper presents literature review and
analysis relating to the techno-economic feasibility of solar
photovoltaic power generation in Africa. The literature is basically
classified into the following four main categories. Techno-economic
feasibility of solar photovoltaic power generation, design methods,
performance evaluations of various systems and policy of potential
future of technological development of photovoltaic (PV) in Africa
by exploring the impact of alternative policy instruments and
technology cost reductions on the financial viability of investing solar
photovoltaic in Africa.
Abstract: Skin aging is a slow multifactorial process influenced
by both internal as well as external factors. Ultra-violet radiations
(UV), diet, smoking and personal habits are the most common
environmental factors that affect skin aging. Fat contents and fibrous
proteins as collagen and elastin are core internal structural
components. The direct influence of UV on elastin integrity and
health is central on aging of skin especially by time. The deposition
of abnormal elastic material is a major marker in a photo-aged skin.
Searching for compounds that may protect against cutaneous photodamage
is exceedingly valued. Retinoids and alpha hydroxy acids
have been endorsed by some researchers as possible candidates for
protecting and or repairing the effect of UV damaged skin. For
consolidating a better system of anti- and protective effects of such
anti-aging agents, we evaluated the combinatory effects of various
dosages of lactic acid and retinol on the dermal fibroblast’s elastin
levels exposed to UV. The UV exposed cells showed significant
reduction in the elastin levels. A combination of drugs with a higher
concentration of lactic acid (30 -35 mM) and a lower concentration of
retinol (10-15mg/mL) showed to work better in maintaining elastin
concentration in UV exposed cells. We assume this preservation
could be the result of increased tropo-elastin gene expression
stimulated by retinol whereas lactic acid probably repaired the UV
irradiated damage by enhancing the amount and integrity of the
elastin fibers.
Abstract: In this paper, effects of using Alumina-water
nanofluid on the rate of heat transfer have been investigated
numerically. Physical model is a square enclosure with insulated top
and bottom horizontal walls, while the vertical walls are kept at
different constant temperatures. Two appropriate models are used to
evaluate the viscosity and thermal conductivity of nanofluid. The
governing stream-vorticity equations are solved using a second order
central finite difference scheme, coupled to the conservation of mass
and energy. The study has been carried out for the Richardson
number 0.1 to 10 and the solid volume fraction 0 to 0.04. Results are
presented by isotherms lines, average Nusselt number and normalized
Nusselt number in different range of φ and Ri for forced, combined
and natural convection dominated regime. It is found that higher heat
transfer rate is predicted when the effects of nanoparticle is taken into
account.
Abstract: Humans are social mammals, of the primate order.
Our biology, our behaviour and our pathologies are unique to us. In
our desire to understand, reduce solitary confinement one source of
information is the many reports of social isolation of other social
mammals, especially primates. A behavioural study was conducted in
the department of pharmacology at Indira Gandhi Medical College,
Shimla in Himachalpradesh province in India using white albino
mice. Different behavioural parameters were observed by using open
field, tail suspension, tests for aggressive behaviour and social
interactions and the effect of isolation was studied. The results were
evaluated and the standard statistics were applied. The said study was
done to establish facts that isolation itself impairs social behaviour
and can lead to alcohol dependence as well as related drug
dependence.
Abstract: This paper analyzes the political and economic issues
that people with disabilities face related to globalization; how people
with disabilities have been adapting globalization and surviving under
worldwide competition system. It explains that economic
globalization exacerbates inequality and deprivation of people with
disabilities. The rising tide of neo-liberal welfare policies emphasized
efficiency, downsized social expenditure for people with disabilities,
excluded people with disabilities against labor market, and shifted
them from welfare system to nothing. However, there have been
people with disabilities' political responses to globalization, which are
characterized by a global network of people with disabilities as well as
participation to global governance. Their resistance can be seen as an
attempt to tackle the problems that economic globalization has
produced. It is necessary paradigm shift of disability policy from
dependency represented by disability benefits to independency
represented by labor market policies for people with disabilities.
Abstract: A well designed and executed Production Planning
and Control (PPC) system is one of the key levers for superior
performance in the current manufacturing set-up. Hence, measuring
the PPC system performance has become a necessity for long term
success. The present study examined PPC related issues which
impact the production capacity and productivity of leather companies
with special focus on Kombolcha Tannery Share Company (KTSC),
Ethiopia. Physical observation, interview, and questionnaire were
used to generate necessary information from the respondents and
reach valid conclusions. Company annual reports were referred and
analyzed to triangulate primary data. Consequently, the study
revealed that KTSC runs below its capacity due to its inefficient PPC
system being in use for which the root causes were identified. The
study thereby conceptualizes a PPC system improvement framework
comprising three pillars viz., management culture, internal capability
and performance measurement together with key considerations in
each case. The study findings enable the company to recognize the
importance of efficient PPC system as a source of competitive
advantage. It also aid managers in evaluating various PPC execution
schemes to enhance productivity.
Abstract: Numerical studies were conducted using Lattice
Boltzmann Method (LBM) to study the natural convection in a square
cavity in the presence of roughness. An algorithm based on a single
relaxation time Bhatnagar-Gross-Krook (BGK) model of Lattice
Boltzmann Method (LBM) was developed. Roughness was
introduced on both the hot and cold walls in the form of sinusoidal
roughness elements. The study was conducted for a Newtonian fluid
of Prandtl number (Pr) 1.0. The range of Ra number was explored
from 10^3 to 10^6 in a laminar region. Thermal and hydrodynamic
behavior of fluid was analyzed using a differentially heated square
cavity with roughness elements present on both the hot and cold wall.
Neumann boundary conditions were introduced on horizontal walls
with vertical walls as isothermal. The roughness elements were at the
same boundary condition as corresponding walls. Computational
algorithm was validated against previous benchmark studies
performed with different numerical methods, and a good agreement
was found to exist. Results indicate that the maximum reduction in
the average heat transfer was 16.66 percent at Ra number 10^5.
Abstract: This paper addresses the issue of the autonomous
mobile robot (AMR) navigation task based on the hybrid control
modes. The novel hybrid control mode, based on multi-sensors
information by using the fuzzy approach, has been presented in this
research. The system operates in real time, is robust, enables the robot
to operate with imprecise knowledge, and takes into account the
physical limitations of the environment in which the robot moves,
obtaining satisfactory responses for a large number of different
situations. An experiment is simulated and carried out with a pioneer
mobile robot. From the experimental results, the effectiveness and
usefulness of the proposed AMR obstacle avoidance and navigation
scheme are confirmed. The experimental results show the feasibility,
and the control system has improved the navigation accuracy. The
implementation of the controller is robust, has a low execution time,
and allows an easy design and tuning of the fuzzy knowledge base.
Abstract: Activated carbons (M4P0, M4P2, and M5P2) used in
this research were produced from palm shell and polyetherether
ketone (PEEK) via carbonization, impregnation and microwave
activation. The adsorption/desorption process was carried out using
static volumetric adsorption. Regeneration is important in the overall
economy of the process and waste minimization. This work focuses
on the thermal regeneration of the CO2 exhausted microwave
activated carbons. The regeneration strategy adopted was thermal
with nitrogen purge desorption with N2 feed flow rate of 20 ml/min
for 1 h at atmospheric pressure followed by drying at 150oC.Seven
successive adsorption/regeneration processes were carried out on the
material. It was found that after seven adsorption regeneration cycles;
the regeneration efficiency (RE) for CO2 activated carbon from palm
shell only (M4P0) was more than 90% while that of hybrid palm
shell-PEEK (M4P2, M5P2) was above 95%. The cyclic adsorption
and regeneration shows the stability of the adsorbent materials.