Abstract: This paper presents a part of research on the
rheological properties of bitumen modified by thermoplastic namely
linear low density polyethylene (LLDPE), high density polyethylene
(HDPE) and polypropylene (PP) and its interaction with 80 pen base
bitumen. As it is known that the modification of bitumen by the use
of polymers enhances its performance characteristics but at the same
time significantly alters its rheological properties. The rheological
study of polymer modified bitumen (PMB) was made through
penetration, ring & ball softening point and viscosity test. The results
were then related to the changes in the rheological properties of
polymer modified bitumen. It was observed that thermoplastic
copolymer shows profound effect on penetration rather than
softening point. The viscoelastic behavior of polymer modified
bitumen depend on the concentration of polymer, mixing
temperature, mixing technique, solvating power of base bitumen and
molecular structure of polymer used. PP offer better blend in
comparison to HDPE and LLDPE. The viscosity of base bitumen was
also enhanced with the addition of polymer. The pseudoplastic
behavior was more prominent for HDPE and LLDPE than PP. Best
results were obtained when polymer concentration was kept below
3%
Abstract: In this article we explore how computer assisted exercises may allow for bridging the traditional gap between theory and practice in professional education. To educate officers able to master the complexity of the battlefield the Norwegian Military Academy needs to develop a learning environment that allows for creating viable connections between the educational environment and the field of practice. In response to this challenge we explore the conditions necessary to make computer assisted training systems (CATS) a useful tool to create structural similarities between an educational context and the field of military practice. Although, CATS may facilitate work procedures close to real life situations, this case do demonstrate how professional competence also must build on viable learning theories and environments. This paper explores the conditions that allow for using simulators to facilitate professional competence from within an educational setting. We develop a generic didactic model that ascribes learning to participation in iterative cycles of action and reflection. The development of this model is motivated by the need to develop an interdisciplinary professional education rooted in the pattern of military practice.
Abstract: During recent years, the traditional learning
approaches have undergone fundamental changes due to the
emergence of new technologies such as multimedia, hypermedia and
telecommunication. E-learning is a modern world phenomenon that
has come into existence in the information age and in a knowledgebased
society. E-learning has developed significantly within a short
period of time. Thus it is of a great significant to secure information,
allow a confident access and prevent unauthorized accesses. Making
use of individuals- physiologic or behavioral (biometric) properties is
a confident method to make the information secure. Among the
biometrics, fingerprint is more acceptable and most countries use it as
an efficient methods of identification. This article provides a new
method to compare the fingerprint comparison by pattern recognition
and image processing techniques. To verify fingerprint, the shortest
distance method is used together with perceptronic multilayer neural
network functioning based on minutiae. This method is highly
accurate in the extraction of minutiae and it accelerates comparisons
due to elimination of false minutiae and is more reliable compared
with methods that merely use directional images.
Abstract: Abdominal aortic aneurysms rupture (AAAs) is one of the main causes of death in the world. This is a very complex phenomenon that usually occurs “without previous warning". Currently, criteria to assess the aneurysm rupture risk (peak diameter and growth rate) can not be considered as reliable indicators. In a first approach, the main geometric parameters of aneurysms have been linked into five biomechanical factors. These are combined to obtain a dimensionless rupture risk index, RI(t), which has been validated preliminarily with a clinical case and others from literature. This quantitative indicator is easy to understand, it allows estimating the aneurysms rupture risks and it is expected to be able to identify the one in aneurysm whose peak diameter is less than the threshold value. Based on initial results, a broader study has begun with twelve patients from the Clinic Hospital of Valladolid-Spain, which are submitted to periodic follow-up examinations.
Abstract: The substrate heater designed for this investigation is a front side substrate heating system. It consists of 10 conventional tungsten halogen lamps and an aluminum reflector, total input electrical power of 5 kW. The substrate is heated by means of a radiation from conventional tungsten halogen lamps directed to the substrate through a glass window. This design allows easy replacement of the lamps and maintenance of the system. Within 2 to 6 minutes the substrate temperature reaches 500 to 830 C by varying the vertical distance between the glass window and the substrate holder. Moreover, the substrate temperature can be easily controlled by controlling the input power to the system. This design gives excellent opportunity to deposit many deferent films at deferent temperatures in the same deposition time. This substrate heater was successfully used for Chemical Vapor Deposition (CVD) of many thin films, such as Silicon, iron, etc.
Abstract: Fundamental sensor-motor couplings form the backbone
of most mobile robot control tasks, and often need to be implemented
fast, efficiently and nevertheless reliably. Machine learning
techniques are therefore often used to obtain the desired sensor-motor
competences.
In this paper we present an alternative to established machine
learning methods such as artificial neural networks, that is very fast,
easy to implement, and has the distinct advantage that it generates
transparent, analysable sensor-motor couplings: system identification
through nonlinear polynomial mapping.
This work, which is part of the RobotMODIC project at the
universities of Essex and Sheffield, aims to develop a theoretical understanding
of the interaction between the robot and its environment.
One of the purposes of this research is to enable the principled design
of robot control programs.
As a first step towards this aim we model the behaviour of the
robot, as this emerges from its interaction with the environment, with
the NARMAX modelling method (Nonlinear, Auto-Regressive, Moving
Average models with eXogenous inputs). This method produces
explicit polynomial functions that can be subsequently analysed using
established mathematical methods.
In this paper we demonstrate the fidelity of the obtained NARMAX
models in the challenging task of robot route learning; we present a
set of experiments in which a Magellan Pro mobile robot was taught
to follow four different routes, always using the same mechanism to
obtain the required control law.
Abstract: Concerning the measurement of friction properties of
textiles and fabrics using Kawabata Evaluation System (KES), whose
output is constrained to the surface friction factor of fabric, and no
other data would be generated; this research has been conducted to
gain information about surface roughness regarding its surface
friction factor. To assess roughness properties of light nonwovens, a
3-dimensional model of a surface has been simulated with regular
sinuous waves through it as an ideal surface. A new factor was
defined, namely Surface Roughness Factor, through comparing
roughness properties of simulated surface and real specimens. The
relation between the proposed factor and friction factor of specimens
has been analyzed by regression, and results showed a meaningful
correlation between them. It can be inferred that the new presented
factor can be used as an acceptable criterion for evaluating the
roughness properties of light nonwoven fabrics.
Abstract: In the paper the results of calculations of the dynamic
response of a multi-storey reinforced concrete building to a strong
mining shock originated from the main region of mining activity in
Poland (i.e. the Legnica-Glogow Copper District) are presented. The
representative time histories of accelerations registered in three
directions were used as ground motion data in calculations of the
dynamic response of the structure. Two variants of a numerical model
were applied: the model including only structural elements of the
building and the model including both structural and non-structural
elements (i.e. partition walls and ventilation ducts made of brick). It
turned out that non-structural elements of multi-storey RC buildings
have a small impact of about 10 % on natural frequencies of these
structures. It was also proved that the dynamic response of building
to mining shock obtained in case of inclusion of all non-structural
elements in the numerical model is about 20 % smaller than in case
of consideration of structural elements only. The principal stresses
obtained in calculations of dynamic response of multi-storey building
to strong mining shock are situated on the level of about 30% of
values obtained from static analysis (dead load).
Abstract: The objective of this research was to identify the
vegetation-soil relationships in Nodushan arid rangelands of Yazd. 5
sites were selected for measuring the cover of plant species and soil
attributes. Soil samples were taken in 0-10 and 10-80 cm layers. The
species studied were Salsola tomentosa, Salsola arbuscula, Peganum
harmala, Zygophylum eurypterum and Eurotia ceratoides. Canonical
correspondence analysis (CCA) was used to analyze the data. Based
on the CCA results, 74.9 % of vegetation-soil variation was explained
by axis 1-3. Axis 1, 2 and 3 accounted for 27.2%, 24.9 % and 22.8%
of variance respectively. Correlation between axis 1, 2, 3 and speciesedaphic
variables were 0.995, 0.989, 0.981 respectively. Soil texture,
lime, salinity and organic matter significantly influenced the
distribution of these plant species. Determination of soil-vegetation
relationships will be useful for managing and improving rangelands
in arid and semi arid environments.
Abstract: This study shows palynomorphological description of
pollen grains of Lamium garganicum, species of the family Labiatae.
Fresh material of this plant is taken in Mount Llogara, in Albania. By
comparison made between palinomorphological characteristics of
pollen grains of Lamium garganicum with those of Lamium
maculatum and Lamium purpureum, showed that granules have
similarities in the number of furrows. The pollen grains of Lamium
garganicum were larger in length and width than those of Lamium
maculatum and almost equal with those of Lamium purpureum.
Furrows are longer than those of pollen grains in Lamium maculatum
and shorter than those of Lamium purpureum. The layer of exine of
Lamium garganicum was thinner than that of two others. The
sculpture of exine was fine reticulate, where reticulas were uniform
whereas in Lamium purpureum was verrucate, with small verrucae; in
Lamium maculatum was reticulate.
Abstract: In this work, the primary compressive strength
components of human femur trabecular bone are qualitatively
assessed using image processing and wavelet analysis. The Primary
Compressive (PC) component in planar radiographic femur trabecular
images (N=50) is delineated by semi-automatic image processing
procedure. Auto threshold binarization algorithm is employed to
recognize the presence of mineralization in the digitized images. The
qualitative parameters such as apparent mineralization and total area
associated with the PC region are derived for normal and abnormal
images.The two-dimensional discrete wavelet transforms are utilized
to obtain appropriate features that quantify texture changes in medical
images .The normal and abnormal samples of the human femur are
comprehensively analyzed using Harr wavelet.The six statistical
parameters such as mean, median, mode, standard deviation, mean
absolute deviation and median absolute deviation are derived at level
4 decomposition for both approximation and horizontal wavelet
coefficients. The correlation coefficient of various wavelet derived
parameters with normal and abnormal for both approximated and
horizontal coefficients are estimated. It is seen that in almost all cases
the abnormal show higher degree of correlation than normals. Further
the parameters derived from approximation coefficient show more
correlation than those derived from the horizontal coefficients. The
parameters mean and median computed at the output of level 4 Harr
wavelet channel was found to be a useful predictor to delineate the
normal and the abnormal groups.
Abstract: The clinical usefulness of heart rate variability is
limited to the range of Holter monitoring software available. These
software algorithms require a normal sinus rhythm to accurately
acquire heart rate variability (HRV) measures in the frequency
domain. Premature ventricular contractions (PVC) or more
commonly referred to as ectopic beats, frequent in heart failure,
hinder this analysis and introduce ambiguity. This investigation
demonstrates an algorithm to automatically detect ectopic beats by
analyzing discrete wavelet transform coefficients. Two techniques
for filtering and replacing the ectopic beats from the RR signal are
compared. One technique applies wavelet hard thresholding
techniques and another applies linear interpolation to replace ectopic
cycles. The results demonstrate through simulation, and signals
acquired from a 24hr ambulatory recorder, that these techniques can
accurately detect PVC-s and remove the noise and leakage effects
produced by ectopic cycles retaining smooth spectra with the
minimum of error.
Abstract: The study investigated the effects of Teaching Games
for Understanding approach on students ‘cognitive learning outcome.
The study was a quasi-experimental non-equivalent pretest-posttest
control group design whereby 10 year old primary school students
(n=72) were randomly assigned to an experimental and a control
group. The experimental group students were exposed with TGfU
approach and the control group with the Traditional Skill approach of
handball game. Game Performance Assessment Instrument (GPAI)
was used to measure students' tactical understanding and decision
making in 3 versus 3 handball game situations. Analysis of
covariance (ANCOVA) was used to analyze the data. The results
reveal that there was a significant difference between the TGfU
approach group and the traditional skill approach group students on
post test score (F (1, 69) = 248.83, p < .05). The findings of this
study suggested the importance of TGfU approach to improve
primary students’ tactical understanding and decision making in
handball game.
Abstract: Yeast cells live in a constantly changing environment that requires the continuous adaptation of their genomic program in order to sustain their homeostasis, survive and proliferate. Due to the advancement of high throughput technologies, there is currently a large amount of data such as gene expression, gene deletion and protein-protein interactions for S. Cerevisiae under various environmental conditions. Mining these datasets requires efficient computational methods capable of integrating different types of data, identifying inter-relations between different components and inferring functional groups or 'modules' that shape intracellular processes. This study uses computational methods to delineate some of the mechanisms used by yeast cells to respond to environmental changes. The GRAM algorithm is first used to integrate gene expression data and ChIP-chip data in order to find modules of coexpressed and co-regulated genes as well as the transcription factors (TFs) that regulate these modules. Since transcription factors are themselves transcriptionally regulated, a three-layer regulatory cascade consisting of the TF-regulators, the TFs and the regulated modules is subsequently considered. This three-layer cascade is then modeled quantitatively using artificial neural networks (ANNs) where the input layer corresponds to the expression of the up-stream transcription factors (TF-regulators) and the output layer corresponds to the expression of genes within each module. This work shows that (a) the expression of at least 33 genes over time and for different stress conditions is well predicted by the expression of the top layer transcription factors, including cases in which the effect of up-stream regulators is shifted in time and (b) identifies at least 6 novel regulatory interactions that were not previously associated with stress-induced changes in gene expression. These findings suggest that the combination of gene expression and protein-DNA interaction data with artificial neural networks can successfully model biological pathways and capture quantitative dependencies between distant regulators and downstream genes.
Abstract: The aim of this study is to find out and analyze the
role of gender and age on the perceptions of students to the distant
online program offered by Vocational High School in Sakarya
University. The research is based on a questionnaire as a mean of
data collection method to find out the role of age and gender on the
student-s perceptions toward online education, and the study
progressed through finding relationships between the variables used
in the data collection instrument. The findings of the analysis
revealed that although the students registered to the online program
by will, they preferred the traditional face-to-face education due to
the difficulty of the nonverbal communication, their incompetence of
using the technology required, and their belief in traditional face-toface
learning more than online education.
Regarding gender, the results showed that the female students
have a better perception of the online education as opposed to the
male students. Regarding age, the results showed that the older the
students are the more is their preference towards attending face-toface
classes.
Abstract: A new OTA-based logarithmic-control variable gain
current amplifier (LCCA) is presented. It consists of two Operational
Transconductance Amplifier (OTA) and two PMOS transistors
biased in weak inversion region. The circuit operates from 0.6V DC
power supply and consumes 0.6 μW. The linear-dB controllable
output range is 43 dB with maximum error less than 0.5dB. The
functionality of the proposed design was confirmed using HSPICE in
0.35μm CMOS process technology.
Abstract: In blended learning environments, the Internet can be combined with other technologies. The aim of this research was to design, introduce and validate a model to support synchronous and asynchronous activities by managing content domains in an Adaptive Hypermedia System (AHS). The application is based on information recovery techniques, clustering algorithms and adaptation rules to adjust the user's model to contents and objects of study. This system was applied to blended learning in higher education. The research strategy used was the case study method. Empirical studies were carried out on courses at two universities to validate the model. The results of this research show that the model had a positive effect on the learning process. The students indicated that the synchronous and asynchronous scenario is a good option, as it involves a combination of work with the lecturer and the AHS. In addition, they gave positive ratings to the system and stated that the contents were adapted to each user profile.
Abstract: Heat transfer from two cam shape cylinder in side-byside
arrangement had been studied numerically.
The transverse gap between the centers of cylinders (T) is allowed
to vary to change the pitch ratio (T/Deq). The equivalent diameter of
the cylinder (Deq) is 27.6 mm and pitch ratio varies in range of
1≤T/Deq≤3. The Reynolds numbers based on equivalent circular
cylinder are within 50≤ Reeq≤150. Results show that Nusselt number
of cylinders increases about 1 to 36 percent when pitch ratio
increases from 1 to 3.
Abstract: Many natural language expressions are ambiguous, and
need to draw on other sources of information to be interpreted.
Interpretation of the e word تعاون to be considered as a noun or a verb
depends on the presence of contextual cues. To interpret words we
need to be able to discriminate between different usages. This paper
proposes a hybrid of based- rules and a machine learning method for
tagging Arabic words. The particularity of Arabic word that may be
composed of stem, plus affixes and clitics, a small number of rules
dominate the performance (affixes include inflexional markers for
tense, gender and number/ clitics include some prepositions,
conjunctions and others). Tagging is closely related to the notion of
word class used in syntax. This method is based firstly on rules (that
considered the post-position, ending of a word, and patterns), and
then the anomaly are corrected by adopting a memory-based learning
method (MBL). The memory_based learning is an efficient method to
integrate various sources of information, and handling exceptional
data in natural language processing tasks. Secondly checking the
exceptional cases of rules and more information is made available to
the learner for treating those exceptional cases. To evaluate the
proposed method a number of experiments has been run, and in
order, to improve the importance of the various information in
learning.
Abstract: The overall objective of this research is a strain
improvement technology for efficient pectinase production. A novel
cells cultivation technology by immobilization of fungal cells has
been studied in long time continuous fermentations. Immobilization
was achieved by using of new material for absorption of stores of
immobilized cultures which was for the first time used for
immobilization of microorganisms. Effects of various conditions of
nitrogen and carbon nutrition on the biosynthesis of pectolytic
enzymes in Aspergillus awamori 1-8 strain were studied. Proposed
cultivation technology along with optimization of media components
for pectinase overproduction led to increased pectinase productivity
in Aspergillus awamori 1-8 from 7 to 8 times. Proposed technology
can be applied successfully for production of major industrial
enzymes such as α-amylase, protease, collagenase etc.