Abstract: Recent trends in building constructions in Libya are
more toward tall (high-rise) building projects. As a consequence, a
better estimation of the lateral loading in the design process is
becoming the focal of a safe and cost effective building industry. Byin-
large, Libya is not considered a potential earthquake prone zone,
making wind is the dominant design lateral loads. Current design
practice in the country estimates wind speeds on a mere random
bases by considering certain factor of safety to the chosen wind
speed. Therefore, a need for a more accurate estimation of wind
speeds in Libya was the motivation behind this study. Records of
wind speed data were collected from 22 metrological stations in
Libya, and were statistically analysed. The analysis of more than four
decades of wind speed records suggests that the country can be
divided into four zones of distinct wind speeds. A computer “survey"
program was manipulated to draw design wind speeds contour map
for the state of Libya.
The paper presents the statistical analysis of Libya-s recorded
wind speed data and proposes design wind speed values for a 50-year
return period that covers the entire country.
Abstract: This paper presents a computational methodology
based on matrix operations for a computer based solution to the
problem of performance analysis of software reliability models
(SRMs). A set of seven comparison criteria have been formulated to
rank various non-homogenous Poisson process software reliability
models proposed during the past 30 years to estimate software
reliability measures such as the number of remaining faults, software
failure rate, and software reliability. Selection of optimal SRM for
use in a particular case has been an area of interest for researchers in
the field of software reliability. Tools and techniques for software
reliability model selection found in the literature cannot be used with
high level of confidence as they use a limited number of model
selection criteria. A real data set of middle size software project from
published papers has been used for demonstration of matrix method.
The result of this study will be a ranking of SRMs based on the
Permanent value of the criteria matrix formed for each model based
on the comparison criteria. The software reliability model with
highest value of the Permanent is ranked at number – 1 and so on.
Abstract: A state of the art Speaker Identification (SI) system requires a robust feature extraction unit followed by a speaker modeling scheme for generalized representation of these features. Over the years, Mel-Frequency Cepstral Coefficients (MFCC) modeled on the human auditory system has been used as a standard acoustic feature set for SI applications. However, due to the structure of its filter bank, it captures vocal tract characteristics more effectively in the lower frequency regions. This paper proposes a new set of features using a complementary filter bank structure which improves distinguishability of speaker specific cues present in the higher frequency zone. Unlike high level features that are difficult to extract, the proposed feature set involves little computational burden during the extraction process. When combined with MFCC via a parallel implementation of speaker models, the proposed feature set outperforms baseline MFCC significantly. This proposition is validated by experiments conducted on two different kinds of public databases namely YOHO (microphone speech) and POLYCOST (telephone speech) with Gaussian Mixture Models (GMM) as a Classifier for various model orders.
Abstract: In this paper we study the fuzzy c-mean clustering algorithm
combined with principal components method. Demonstratively
analysis indicate that the new clustering method is well rather than
some clustering algorithms. We also consider the validity of clustering
method.
Abstract: Manufacturing processes demand tight dimensional
tolerances. The paper concerns a transducer for precise measurement
of displacement, based on a camera containing a linescan chip.
When tests were conducted using a track of black and white stripes
with a 2mm pitch, errors in measuring on individual cycle amounted
to 1.75%, suggesting that a precision of 35 microns is achievable.
Abstract: Multiphase flow transport in porous medium is very common and significant in science and engineering applications. For example, in CO2 Storage and Enhanced Oil Recovery processes, CO2 has to be delivered to the pore spaces in reservoirs and aquifers. CO2 storage and enhance oil recovery are actually displacement processes, in which oil or water is displaced by CO2. This displacement is controlled by pore size, chemical and physical properties of pore surfaces and fluids, and also pore wettability. In this study, a technique was developed to measure the pressure profile for driving gas/liquid to displace water in pores. Through this pressure profile, the impact of pore size on the multiphase flow transport and displacement can be analyzed. The other rig developed can be used to measure the static and dynamic pore wettability and investigate the effects of pore size, surface tension, viscosity and chemical structure of liquids on pore wettability.
Abstract: Most routing protocols (DSR, AODV etc.) that have
been designed for wireless adhoc networks incorporate the broadcasting
operation in their route discovery scheme. Probabilistic broadcasting
techniques have been developed to optimize the broadcast operation
which is otherwise very expensive in terms of the redundancy
and the traffic it generates. In this paper we have explored percolation
theory to gain a different perspective on probabilistic broadcasting
schemes which have been actively researched in the recent years.
This theory has helped us estimate the value of broadcast probability
in a wireless adhoc network as a function of the size of the network.
We also show that, operating at those optimal values of broadcast
probability there is at least 25-30% reduction in packet regeneration
during successful broadcasting.
Abstract: Complex engineering design problems consist of
numerous factors of varying criticalities. Considering fundamental features of design and inferior details alike will result in an extensive
waste of time and effort. Design parameters should be introduced gradually as appropriate based on their significance relevant to the
problem context. This motivates the representation of design parameters at multiple levels of an abstraction hierarchy. However, developing abstraction hierarchies is an area that is not well
understood. Our research proposes a novel hierarchical abstraction methodology to plan effective engineering designs and processes. It
provides a theoretically sound foundation to represent, abstract and stratify engineering design parameters and tasks according to causality and criticality. The methodology creates abstraction
hierarchies in a recursive and bottom-up approach that guarantees no
backtracking across any of the abstraction levels. The methodology consists of three main phases, representation, abstraction, and layering to multiple hierarchical levels. The effectiveness of the
developed methodology is demonstrated by a design problem.
Abstract: In this paper is presented a Geographic Information System (GIS) approach in order to qualify and monitor the broadband lines in efficient way. The methodology used for interpolation is the Delaunay Triangular Irregular Network (TIN). This method is applied for a case study in ISP Greece monitoring 120,000 broadband lines.
Abstract: We introduce the notion of strongly ω -Gorenstein modules, where ω is a faithfully balanced self-orthogonal module. This gives a common generalization of both Gorenstein projective (injective) modules and ω-Gorenstein modules. We investigate some characterizations of strongly ω -Gorenstein modules. Consequently, some properties under change of rings are obtained.
Abstract: Facility Layout Problem (FLP) is one of the essential
problems of several types of manufacturing and service sector. It is
an optimization problem on which the main objective is to obtain the
efficient locations, arrangement and order of the facilities. In the
literature, there are numerous facility layout problem research
presented and have used meta-heuristic approaches to achieve
optimal facility layout design. This paper presented genetic algorithm
to solve facility layout problem; to minimize total cost function. The
performance of the proposed approach was verified and compared
using problems in the literature.
Abstract: Non-saturated soils that while saturation greatly
decrease their volume, have sudden settlement due to increasing
humidity, fracture and structural crack are called loess soils. Whereas
importance of civil projects including: dams, canals and
constructions bearing this type of soil and thereof problems, it is
required for carrying out more research and study in relation to loess
soils. This research studies shear strength parameters by using
grading test, Atterberg limit, compression, direct shear and
consolidation and then effect of using cement and lime additives on
stability of loess soils is studied. In related tests, lime and cement are
separately added to mixed ratios under different percentages of soil
and for different times the stabilized samples are processed and effect
of aforesaid additives on shear strength parameters of soil is studied.
Results show that upon passing time the effect of additives and
collapsible potential is greatly decreased and upon increasing
percentage of cement and lime the maximum dry density is
decreased; however, optimum humidity is increased. In addition,
liquid limit and plastic index is decreased; however, plastic index
limit is increased. It is to be noted that results of direct shear test
reveal increasing shear strength of soil due to increasing cohesion
parameter and soil friction angle.
Abstract: Time varying network induced delays in networked
control systems (NCS) are known for degrading control system-s
quality of performance (QoP) and causing stability problems. In
literature, a control method employing modeling of communication
delays as probability distribution, proves to be a better method. This
paper focuses on modeling of network induced delays as probability
distribution.
CAN and MIL-STD-1553B are extensively used to carry periodic
control and monitoring data in networked control systems.
In literature, methods to estimate only the worst-case delays for
these networks are available. In this paper probabilistic network
delay model for CAN and MIL-STD-1553B networks are given.
A systematic method to estimate values to model parameters from
network parameters is given. A method to predict network delay in
next cycle based on the present network delay is presented. Effect of
active network redundancy and redundancy at node level on network
delay and system response-time is also analyzed.
Abstract: The Block Sorting problem is to sort a given
permutation moving blocks. A block is defined as a substring
of the given permutation, which is also a substring of the
identity permutation. Block Sorting has been proved to be
NP-Hard. Until now two different 2-Approximation algorithms
have been presented for block sorting. These are the best known
algorithms for Block Sorting till date. In this work we present
a different characterization of Block Sorting in terms of a
transposition cycle graph. Then we suggest a heuristic,
which we show to exhibit a 2-approximation performance
guarantee for most permutations.
Abstract: Considering a reservoir with periodic states and
different cost functions with penalty, its release rules can be
modeled as a periodic Markov decision process (PMDP). First,
we prove that policy- iteration algorithm also works for the
PMDP. Then, with policy- iteration algorithm, we obtain the
optimal policies for a special aperiodic reservoir model with
two cost functions under large penalty and give a discussion
when the penalty is small.
Abstract: Baltic competitiveness is quite controversial. In a
situation with the rapid structural changes, economy develops in
balance very rarely - in different fields will always be more rapid
changes in another more stagnation.
Analyzing different economic indices developed by international
organizations the situation in three Baltic countries are described
from a different competitiveness positions highlighting strengths and
weaknesses of each country.
Exploring the openness of the economy, it is possible to observe
certain risks included in the reports describing situation of
competitiveness where government policies competing in the tax
system, the rates of labour market policies, investment environment,
etc. This is a very important factor resulting in competitive
advantage.
Baltic countries are still at a weak position from a technological
perspective, and need to borrow the knowledge and technology from
more developed countries.
Abstract: Within the domain of Systems Engineering the need
to perform property aggregation to understand, analyze and manage
complex systems is unequivocal. This can be seen in numerous
domains such as capability analysis, Mission Essential Competencies
(MEC) and Critical Design Features (CDF). Furthermore, the need
to consider uncertainty propagation as well as the sensitivity of
related properties within such analysis is equally as important when
determining a set of critical properties within such a system.
This paper describes this property breakdown in a number of
domains within Systems Engineering and, within the area of CDFs,
emphasizes the importance of uncertainty analysis. As part of this, a
section of the paper describes possible techniques which may be used
within uncertainty propagation and in conclusion an example is
described utilizing one of the techniques for property and uncertainty
aggregation within an aircraft system to aid the determination of
Critical Design Features.
Abstract: This research was carried out to determine the
possible effects of low electromagnetic field (EMF) exposure to the
developing mice fetuses. Pregnant mice were exposed to EMF
exposure at 0mT (sham) and 1.2 mT for six hours per session, carried
out on gestation day 3, 6, 9, 12 and 15. Samples from the stillborn
offspring were observed for morphological defects. The heart didn-t
show progressive cellular damage, the lungs were congested and
emphysemics. The bones were in advance stage of hypertrophy.
Spectrums of morphological defects were observed over 70% of the
surviving offspring. These results indicate that even at lower
exposure to low EMF, is enough to induce morphological defects in
prenatal mice.
Abstract: Transaction management is one of the most crucial requirements for enterprise application development which often require concurrent access to distributed data shared amongst multiple application / nodes. Transactions guarantee the consistency of data records when multiple users or processes perform concurrent operations. Existing Fault Tolerance Infrastructure for Mobile Agents (FTIMA) provides a fault tolerant behavior in distributed transactions and uses multi-agent system for distributed transaction and processing. In the existing FTIMA architecture, data flows through the network and contains personal, private or confidential information. In banking transactions a minor change in the transaction can cause a great loss to the user. In this paper we have modified FTIMA architecture to ensure that the user request reaches the destination server securely and without any change. We have used triple DES for encryption/ decryption and MD5 algorithm for validity of message.
Abstract: The world-s largest Pre-stressed Concrete Cylinder
Pipe (PCCP) water supply project had a series of pipe failures which
occurred between 1999 and 2001. This has led the Man-Made River
Authority (MMRA), the authority in charge of the implementation
and operation of the project, to setup a rehabilitation plan for the
conveyance system while maintaining the uninterrupted flow of
water to consumers. At the same time, MMRA recognized the need
for a long term management tool that would facilitate repair and
maintenance decisions and enable taking the appropriate preventive
measures through continuous monitoring and estimation of the
remaining life of each pipe. This management tool is known as the
Pipe Risk Management System (PRMS) and now in operation at
MMRA. Both the rehabilitation plan and the PRMS require the
availability of complete and accurate pipe construction and
manufacturing data
This paper describes a systematic approach of data collection,
analysis, evaluation and correction for the construction and
manufacturing data files of phase I pipes which are the platform for
the PRMS database and any other related decision support system.