Abstract: This paper proposes method of diagnosing ball screw
preload loss through the Hilbert-Huang Transform (HHT) and
Multiscale entropy (MSE) process. The proposed method can
diagnose ball screw preload loss through vibration signals when the
machine tool is in operation. Maximum dynamic preload of 2 %, 4 %,
and 6 % ball screws were predesigned, manufactured, and tested
experimentally. Signal patterns are discussed and revealed using
Empirical Mode Decomposition(EMD)with the Hilbert Spectrum.
Different preload features are extracted and discriminated using HHT.
The irregularity development of a ball screw with preload loss is
determined and abstracted using MSE based on complexity
perception. Experiment results show that the proposed method can
predict the status of ball screw preload loss. Smart sensing for the
health of the ball screw is also possible based on a comparative
evaluation of MSE by the signal processing and pattern matching of
EMD/HHT. This diagnosis method realizes the purposes of prognostic
effectiveness on knowing the preload loss and utilizing convenience.
Abstract: A novel and versatile numerical technique to solve a self-stress equilibrium state is adopted herein as a form-finding procedure for an irregular tensegrity structure. The numerical form-finding scheme of a tensegrity structure uses only the connectivity matrix and prototype tension coefficient vector as the initial guess solution. Any information on the symmetrical geometry or other predefined initial structural conditions is not necessary to get the solution in the form-finding process. An eight-node initial condition example is presented to demonstrate the efficiency and robustness of the proposed method in the form-finding of an irregular tensegrity structure. Based on the conception from the form-finding of an eight-node irregular tensegrity structure, a monumental object is designed by considering the real world situation such as self-weight, wind and earthquake loadings.
Abstract: Suppose G(V,E) is a graph, a function f : V \cup E \to \{1, 2, 3, \cdots, k\} is called the total edge(vertex) irregular k-labelling for G such that for each two edges are different having distinct weights. The total edge(vertex) irregularity strength of G, denoted by tes(G)(tvs(G), is the smallest k positive integers such that G has a total edge(vertex) irregular k-labelling. In this paper, we determined the total edge(vertex) irregularity strength of an amalgamation of two isomorphic cycles. The total edge irregularity strength and the total vertex irregularity strength of two isomorphic cycles on n vertices are \lceil (2n+2)/3 \rceil and \lceil 2n/3 \rceil for n \geq 3, respectively.
Abstract: The automatic construction of large, high-resolution
image vistas (mosaics) is an active area of research in the fields of
photogrammetry [1,2], computer vision [1,4], medical image
processing [4], computer graphics [3] and biometrics [8]. Image
stitching is one of the possible options to get image mosaics. Vista
Creation in image processing is used to construct an image with a
large field of view than that could be obtained with a single
photograph. It refers to transforming and stitching multiple images
into a new aggregate image without any visible seam or distortion in
the overlapping areas. Vista creation process aligns two partial
images over each other and blends them together. Image mosaics
allow one to compensate for differences in viewing geometry. Thus
they can be used to simplify tasks by simulating the condition in
which the scene is viewed from a fixed position with single camera.
While obtaining partial images the geometric anomalies like rotation,
scaling are bound to happen. To nullify effect of rotation of partial
images on process of vista creation, we are proposing rotation
invariant vista creation algorithm in this paper. Rotation of partial
image parts in the proposed method of vista creation may introduce
some missing region in the vista. To correct this error, that is to fill
the missing region further we have used image inpainting method on
the created vista. This missing view regeneration method also
overcomes the problem of missing view [31] in vista due to cropping,
irregular boundaries of partial image parts and errors in digitization
[35]. The method of missing view regeneration generates the missing
view of vista using the information present in vista itself.
Abstract: Ambiguities in effects of earthquake on various
structures in all earthquake codes would necessitate more study and
research concerning influential factors on dynamic behavior.
Previous studies which were done on different features in different
buildings play a major role in the type of response a structure makes
to lateral vibrations. Diagnosing each of these irregularities can help
structure designers in choosing appropriate setbacks for decreasing
possible damages. Therefore vertical setback is one of the irregularity
factors in the height of the building where can be seen in skyscrapers
and hotels. Previous researches reveal notable changes in the place of
these setbacks showing dynamic response of the structure.
Consequently analyzing 48 models of concrete frames for 3, 6 and 9
stories heights with three different bays in general shape of a surface
decline by height have been constructed in ETABS2000 software,
and then the shape effect of each and every one of these frames in
period scale has been discussed. The result of this study reveals that
not only mass, stiffness and height but also shape of the frame is
influential.
Abstract: The productivity of software development is one of the major concerns for project managers. Given the increasing complexity of the software being developed and the concomitant rise in the typical project size, the productivity has not consistently improved. By analyzing the latest release of ISBSG data repository with 4106 projects ever developed, we report on the factors found to significantly influence productivity, and present an original model for the estimation of productivity during project design. We further illustrate that software development productivity has experienced irregular variations between the years 1995 and 2005. Considering the factors significant to productivity, we found its variations are primarily caused by the variations of average team size for the development and the unbalanced use of the less productive development language 3GL.
Abstract: Because of architectural condition and structure application, sometimes mass source and stiffness source are not coincidence, and the structure is irregular. The structure is also might be asymmetric as an asymmetric bracing in plan which leads to unbalance distribution of stiffness or because of unbalance distribution of the mass. Both condition lead to eccentricity and torsion in the structure. The deficiency of ordinary code to evaluate the performance of steel structures against earthquake has been caused designing based on performance level or capacity spectrum be used. By using the mentioned methods it is possible to design a structure that its behavior against different earthquakes be predictive. In this article 5- story buildings with different percentage of asymmetric which is because of stiffness changes and kind of bracing (x and chevron bracing) have been designed. The static and dynamic nonlinear analysis under three acceleration recording has been done. Finally performance level of the structure has been evaluated.
Abstract: Calcium [Ca2+] dynamics is studied as a potential form
of neuron excitability that can control many irregular processes like
metabolism, secretion etc. Ca2+ ion enters presynaptic terminal and
increases the synaptic strength and thus triggers the neurotransmitter
release. The modeling and analysis of calcium dynamics in neuron
cell becomes necessary for deeper understanding of the processes
involved. A mathematical model has been developed for cylindrical
shaped neuron cell by incorporating physiological parameters like
buffer, diffusion coefficient, and association rate. Appropriate initial
and boundary conditions have been framed. The closed form solution
has been developed in terms of modified Bessel function. A computer
program has been developed in MATLAB 7.11 for the whole
approach.
Abstract: Packing problems arise in a wide variety of application
areas. The basic problem is that of determining an efficient arrangement
of different objects in a region without any overlap and
with minimal wasted gap between shapes. This paper presents a
novel population based approach for optimizing arrangement of irregular
shapes. In this approach, each shape is coded as an agent and
the agents' reproductions and grouping policies results in arrangements
of the objects in positions with least wasted area between
them. The approach is implemented in an application for cutting
sheets and test results on several problems from literature are presented.
Abstract: Multi criteria decision making (MCDM) methods like analytic hierarchy process, ELECTRE and multi-attribute utility theory are critically studied. They have irregularities in terms of the reliability of ranking of the best alternatives. The Routing Decision Support (RDS) algorithm is trying to improve some of their deficiencies. This paper gives a mathematical verification that the RDS algorithm conforms to the test criteria for an effective MCDM method when a linear preference function is considered.
Abstract: Today, Hydroforming technology provides an
attractive alternative to conventional matched die forming, especially
for cost-sensitive, lower volume production, and for parts with
irregular contours. In this study the critical fluid pressures which lead
to rupture in the workpiece has been investigated by theoretical and
finite element methods. The axisymmetric analysis was developed to
investigate the tearing phenomenon in cylindrical Hydroforming
Deep Drawing (HDD). By use of obtained equations the effect of
anisotropy, drawing ratio, sheet thickness and strain hardening
exponent on tearing diagram were investigated.
Abstract: Rainfall data at fine resolution and knowledge of its
characteristics plays a major role in the efficient design and operation
of agricultural, telecommunication, runoff and erosion control as well
as water quality control systems. The paper is aimed to study the
statistical distribution of hourly rainfall depth for 12 representative
stations spread across Peninsular Malaysia. Hourly rainfall data of 10
to 22 years period were collected and its statistical characteristics
were estimated. Three probability distributions namely, Generalized
Pareto, Exponential and Gamma distributions were proposed to
model the hourly rainfall depth, and three goodness-of-fit tests,
namely, Kolmogorov-Sminov, Anderson-Darling and Chi-Squared
tests were used to evaluate their fitness. Result indicates that the east
cost of the Peninsular receives higher depth of rainfall as compared
to west coast. However, the rainfall frequency is found to be
irregular. Also result from the goodness-of-fit tests show that all the
three models fit the rainfall data at 1% level of significance.
However, Generalized Pareto fits better than Exponential and
Gamma distributions and is therefore recommended as the best fit.
Abstract: Deep cold rolling (DCR) is a cold working process, which easily produces a smooth and work-hardened surface by plastic deformation of surface irregularities. In the present study, the influence of main deep cold rolling process parameters on the surface roughness and the hardness of AISI 4140 steel were studied by using fractional factorial design of experiments. The assessment of the surface integrity aspects on work material was done, in terms of identifying the predominant factor amongst the selected parameters, their order of significance and setting the levels of the factors for minimizing surface roughness and/or maximizing surface hardness. It was found that the ball diameter, rolling force, initial surface roughness and number of tool passes are the most pronounced parameters, which have great effects on the work piece-s surface during the deep cold rolling process. A simple, inexpensive and newly developed DCR tool, with interchangeable collet for using different ball diameters, was used throughout the experimental work presented in this paper.
Abstract: Direct numerical simulation (DNS) is used to study the evolution of a boundary layer that was laminar initially followed by separation and then reattachment owing to generation of turbulence. This creates a closed region of recirculation, known as the laminar-separation bubble. The present simulation emulates the flow environment encountered in a modern LP turbine blade, where a laminar separation bubble may occur on the suction surface. The unsteady, incompressible three-dimensional (3-D) Navier-Stokes (NS) equations have been solved over a flat plate in the Cartesian coordinates. The adverse pressure gradient, which causes the flow to separate, is created by a boundary condition. The separated shear layer undergoes transition through appearance of ╬ø vortices, stretching of these create longitudinal streaks. Breakdown of the streaks into small and irregular structures makes the flow turbulent downstream.
Abstract: An inverse geometry problem is solved to predict an
unknown irregular boundary profile. The aim is to minimize the
objective function, which is the difference between real and
computed temperatures, using three different versions of Conjugate
Gradient Method. The gradient of the objective function, considered
necessary in this method, obtained as a result of solving the adjoint
equation. The abilities of three versions of Conjugate Gradient
Method in predicting the boundary profile are compared using a
numerical algorithm based on the method. The predicted shapes show
that due to its convergence rate and accuracy of predicted values, the
Powell-Beale version of the method is more effective than the
Fletcher-Reeves and Polak –Ribiere versions.
Abstract: Wave generation methodology has been developed
and validated by simulating wave in CFD. In this analysis, Flap type
wave maker has been modeled numerically with wave basin to
generate waves for marine experimental analysis. Irregular waves are
arrived from the wave spectrum, and this wave has been simulated in
CFD. Generated irregular wave has been compared with an analytical
wave. Simulated wave has been processed for FFT analysis, and the
wave spectrum is validated with original wave spectrum.
Abstract: An effective method for the early detection of breast
cancer is the mammographic screening. One of the most important
signs of early breast cancer is the presence of microcalcifications. For
the detection of microcalcification in a mammography image, we
propose to conceive a multiagent system based on a dual irregular
pyramid.
An initial segmentation is obtained by an incremental approach;
the result represents level zero of the pyramid. The edge information
obtained by application of the Canny filter is taken into account to
affine the segmentation. The edge-agents and region-agents cooper
level by level of the pyramid by exploiting its various characteristics
to provide the segmentation process convergence.
Abstract: Low carbon deep drawing steel DC 01 according to EN 10130-91 was nitrooxidized in dissociated ammonia at 580°C/45 min and consequently oxidised at 380°C/5 min in vapour of distilled water. Material after nitrooxidation had 54 % increase of yield point, 34 % increase of strength and 10-times increased resistance to atmospheric corrosion in comparison to the material before nitrooxidation. The microstructure of treated material consisted of thin ε-phase layer connected to layer containing precipitated massive needle shaped Fe4N - γ' nitrides. This layer passed to a diffusion layer consisting of fine irregular shaped Fe16N2 - α'' nitrides regularly dispersed in ferritic matrix. Fatigue properties were examined under bending load with frequency of 20 kHz and sinusoidal symmetric cycle. The results confirmed positive influence of nitrooxidation on fatigue properties as fatigue limit of treated material was double in comparison to untreated material.
Abstract: As the web continues to grow exponentially, the idea
of crawling the entire web on a regular basis becomes less and less
feasible, so the need to include information on specific domain,
domain-specific search engines was proposed. As more information
becomes available on the World Wide Web, it becomes more difficult
to provide effective search tools for information access. Today,
people access web information through two main kinds of search
interfaces: Browsers (clicking and following hyperlinks) and Query
Engines (queries in the form of a set of keywords showing the topic
of interest) [2]. Better support is needed for expressing one's
information need and returning high quality search results by web
search tools. There appears to be a need for systems that do reasoning
under uncertainty and are flexible enough to recover from the
contradictions, inconsistencies, and irregularities that such reasoning
involves. In a multi-view problem, the features of the domain can be
partitioned into disjoint subsets (views) that are sufficient to learn the
target concept. Semi-supervised, multi-view algorithms, which
reduce the amount of labeled data required for learning, rely on the
assumptions that the views are compatible and uncorrelated. This
paper describes the use of semi-structured machine learning approach
with Active learning for the “Domain Specific Search Engines". A
domain-specific search engine is “An information access system that
allows access to all the information on the web that is relevant to a
particular domain. The proposed work shows that with the help of
this approach relevant data can be extracted with the minimum
queries fired by the user. It requires small number of labeled data and
pool of unlabelled data on which the learning algorithm is applied to
extract the required data.
Abstract: The heavy metal contamination of the technogenous
sediments and soils at the investigated dump-field show irregular
planar distribution. Also the heavy metal content in the surface water,
drainage water and in the groundwater was studied both in the dry as
well as during the rainy periods. The cementation process causes
substitution of iron by copper. Natural installation and development
of plant species was observed at the old mine waste dumps, specific
to the local chemical conditions such as low content of essential
nutrients and high content of heavy metals. The individual parts of
the plant tissues (roots, branches/stems, leaves/needles, flowers/
fruits) are contaminated by heavy metals and tissues are damaged
differently, respectively.