Abstract: Excavation and retaining walls are of challenging
issues in civil engineering. In this study, the behavior of one
important type of supporting systems called Contiguous Bored Pile
(CBP) retaining wall is investigated using a physical model. Besides,
a comparison is made between two modes of free end piles (soft bed)
and fixed end piles (stiff bed). Also a back calculation of effective
length (the real free length of pile) is done by measuring lateral
deflection of piles in different stages of excavation in both
aforementioned cases. Based on observed results, for the fixed end
mode, the effective length to free length ratio (Leff/L0) is equal to
unity in initial stages of excavation and less than 1 in its final stages
in a decreasing manner. While this ratio for free end mode, remains
constant during all stages of excavation and is always less than unity.
Abstract: This paper aims to represent the commercial activity
of a city taking as source data the social network Foursquare. The
city of Murcia is selected as case study, and the location-based
social network Foursquare is the main source of information. After
carrying out a reorganisation of the user-generated data extracted
from Foursquare, it is possible to graphically display on a map the
various city spaces and venues especially those related to commercial,
food and entertainment sector businesses. The obtained visualisation
provides information about activity patterns in the city of Murcia
according to the people‘s interests and preferences and, moreover,
interesting facts about certain characteristics of the town itself.
Abstract: Nanocrystalline powders of the lead-free piezoelectric
material, tantalum-substituted potassium sodium niobate
(K0.5Na0.5)(Nb0.9Ta0.1)O3 (KNNT), were produced using a Retsch
PM100 planetary ball mill by setting the milling time to 15h, 20h,
25h, 30h, 35h and 40h, at a fixed speed of 250rpm. The average
particle size of the milled powders was found to decrease from 12nm
to 3nm as the milling time increases from 15h to 25h, which is in
agreement with the existing theoretical model. An anomalous
increase to 98nm and then a drop to 3nm in the particle size were
observed as the milling time further increases to 30h and 40h
respectively. Various sizes of these starting KNNT powders were
used to investigate the effect of milling time on the microstructure,
dielectric properties, phase transitions and piezoelectric properties of
the resulting KNNT ceramics. The particle size of starting KNNT
was somewhat proportional to the grain size. As the milling time
increases from 15h to 25h, the resulting ceramics exhibit
enhancement in the values of relative density from 94.8% to 95.8%,
room temperature dielectric constant (εRT) from 878 to 1213, and
piezoelectric charge coefficient (d33) from 108pC/N to 128pC/N. For
this range of ceramic samples, grain size refinement suppresses the
maximum dielectric constant (εmax), shifts the Curie temperature (Tc)
to a lower temperature and the orthorhombic-tetragonal phase
transition (Tot) to a higher temperature. Further increase of milling
time from 25h to 40h produces a gradual degradation in the values of
relative density, εRT, and d33 of the resulting ceramics.
Abstract: PVC foam-fly ash composites (PVC-FA) are
characterized for their structural, morphological, mechanical and
thermal properties. The tensile strength of the composites increased
modestly with higher fly ash loading, while there was a significant
increase in the elastic modulus for the same composites. On the other
hand, a decrease in elongation at UTS was observed upon increasing
fly ash content due to increased rigidity of the composites. Similarly,
the flexural modulus increased as the fly ash loading increased,
where the composites containing 25 phr fly ash showed the highest
flexural strength. Thermal properties of PVC-fly ash composites were
determined by Thermo Gravimetric Analysis (TGA). The
microstructural properties were studied by Scanning Electron
Microscopy (SEM). SEM results confirm that fly ash particles were
mechanically interlocked in PVC matrix with good interfacial
interaction with the matrix. Particle agglomeration and debonding
was observed in samples containing higher amounts of fly ash.
Abstract: Communicating and managing customers’
requirements in software development projects play a vital role in the
software development process. While it is difficult to do so locally, it
is even more difficult to communicate these requirements over
distributed boundaries and to convey them to multiple distribution
customers. This paper discusses the communication of multiple
distribution customers’ requirements in the context of customised
software products. The main purpose is to understand the challenges
of communicating and managing customisation requirements across
distributed boundaries. We propose a model for Communicating
Customisation Requirements of Multi-Clients in a Distributed
Domain (CCRD). Thereafter, we evaluate that model by presenting
the findings of a case study conducted with a company with
customisation projects for 18 distributed customers. Then, we
compare the outputs of the real case process and the outputs of the
CCRD model using simulation methods. Our conjecture is that the
CCRD model can reduce the challenge of communication
requirements over distributed organisational boundaries, and the
delay in decision making and in the entire customisation process
time.
Abstract: In this study, microcrystalline cellulose (MCC) was
extracted from oil palm empty fruit bunch (EFB) cellulose which was
earlier isolated from oil palm EFB fibre. In order to isolate the
cellulose, the chlorination method was carried out. Then, the MCC
was prepared by simultaneous ultrasonic and alkali treatment from
the isolated α-cellulose. Based on mass balance calculation, the yields
for MCC obtained from EFB was 44%. For fiber characterization, it
is observed that the chemical composition of the hemicellulose and
lignin for all samples decreased while composition for cellulose
increased. The structural property of the MCC was studied by X-ray
diffraction (XRD) method and the result shows that the MCC
produced is a cellulose-I polymorph, with 73% crystallinity.
Abstract: Among modern airflow measurement methods,
Particle Image Velocimetry (PIV) and Particle Tracking Velocimetry
(PTV), as visualized and non-instructive measurement techniques, are
playing more important role. This paper conducts a comparative
experimental study for airflow measurement employing both
techniques with the same condition. Velocity vector fields, velocity
contour fields, voticity profiles and turbulence profiles are selected as
the comparison indexes. The results show that the performance of both
PIV and PTV techniques for airflow measurement is satisfied, but
some differences between the both techniques are existed, it suggests
that selecting the measurement technique should be based on a
comprehensive consideration.
Abstract: In EFL programs, rating scales used in writing
assessment are often constructed by intuition. Intuition-based scales
tend to provide inaccurate and divisive ratings of learners’ writing
performance. Hence, following an empirical approach, this study
attempted to develop a rating scale for elementary-level writing at an
EFL program in Saudi Arabia. Towards this goal, 98 students’ essays
were scored and then coded using comprehensive taxonomy of
writing constructs and their measures. An automatic linear modeling
was run to find out which measures would best predict essay scores.
A nonparametric ANOVA, the Kruskal-Wallis test, was then used to
determine which measures could best differentiate among scoring
levels. Findings indicated that there were certain measures that could
serve as either good predictors of essay scores or differentiators
among scoring levels, or both. The main conclusion was that a rating
scale can be empirically developed using predictive and
discriminative statistical tests.
Abstract: Children are more susceptible to medication errors
than adults. Medication administration process is the last stage in the
medication treatment process and most of the errors detected in this
stage. Little research has been undertaken about medication errors in
children in the Middle East countries. This study was aimed to
evaluate how the paediatric nurses adhere to the medication
administration policy and also to identify any medication preparation
and administration errors or any risk factors. An observational,
prospective study of medication administration process from when
the nurses preparing patient medication until administration stage
(May to August 2014) was conducted in Saudi Arabia. Twelve
paediatric nurses serving 90 paediatric patients were observed. 456
drug administered doses were evaluated. Adherence rate was variable
in 7 steps out of 16 steps. Patient allergy information, dose
calculation, drug expiry date were the steps in medication
administration with lowest adherence rates. 63 medication
preparation and administration errors were identified with error rate
13.8% of medication administrations. No potentially life-threating
errors were witnessed. Few logistic and administrative factors were
reported. The results showed that the medication administration
policy and procedure need an urgent revision to be more sensible for
nurses in practice. Nurses’ knowledge and skills regarding to the
medication administration process should be improved.
Abstract: Recommendation systems are widely used in
e-commerce applications. The engine of a current recommendation
system recommends items to a particular user based on user
preferences and previous high ratings. Various recommendation
schemes such as collaborative filtering and content-based approaches
are used to build a recommendation system. Most of current
recommendation systems were developed to fit a certain domain such
as books, articles, and movies. We propose1 a hybrid framework
recommendation system to be applied on two dimensional spaces
(User × Item) with a large number of Users and a small number
of Items. Moreover, our proposed framework makes use of both
favorite and non-favorite items of a particular user. The proposed
framework is built upon the integration of association rules mining
and the content-based approach. The results of experiments show
that our proposed framework can provide accurate recommendations
to users.
Abstract: Due to the importance of ports to trade and economic
development of the regions in which they are inserted, in recent
decades the number of studies devoted to this subject has increased.
Part of these studies considers the ports as business agglomerations
and focuses on port governance. This is an important approach since
the port performance is the result of activities performed by actors
belonging to the port-logistics chain, which need to be properly
coordinated. This coordination takes place through a port governance
model. Given this context, this study aims to analyze the governance
model of the port of Santos from the perspective of port customers.
To do this, a closed-ended questionnaire based on a conceptual model
that considers the key dimensions associated with port governance
was applied to the international freight forwarders that operate in the
port. The results show the applicability of the considered model and
highlight improvement opportunities to be implemented at the port of
Santos.
Abstract: The main purpose of this work was verify the
influence of the accelerated carbonation in the physical and
mechanical properties of the hybrid composites, reinforced with
micro and nanofibers and composites with microfibers. The
composites were produced by the slurry vacuum dewatering method,
followed by pressing. It was produced using two formulations: 8% of
eucalyptus pulp + 1% of the nanofibrillated cellulose and 9% of
eucalyptus pulp, both were subjected to accelerated carbonation. The
results showed that the accelerated carbonation contributed to
improve the physical and mechanical properties of the hybrid
composites and of the composites reinforced with microfibers
(eucalyptus pulp).
Abstract: Adapting quickly to environmental dynamism is
essential for an organization to develop outsourcing strategic and
management in order to sustain competitive advantage. This research
used the Partial Least Squares Structural Equation Modeling (PLSSEM)
tool to investigate the factors of environmental dynamism
impact on the strategic outsourcing success among electrical and
electronic manufacturing industries in outsourcing management.
Statistical results confirm that the inclusion of customer demand,
technological change, and competition level as a new combination
concept of environmental dynamism, has positive effects on
outsourcing success. Additionally, this research demonstrates the
acceptability of PLS-SEM as a statistical analysis to furnish a better
understanding of environmental dynamism in outsourcing
management in Malaysia. A practical finding contributes to
academics and practitioners in the field of outsourcing management.
Abstract: Monocopter is a single-wing rotary flying vehicle
which has the capability of hovering. This flying vehicle includes two
dynamic parts in which more efficiency can be expected rather than
other Micro UAVs due to the extended area of wing compared to its
fuselage. Low cost and simple mechanism in comparison to other
vehicles such as helicopter are the most important specifications of
this flying vehicle.
In the previous paper we discussed the introduction of the final
system but in this paper, the experimental design process of
Monocopter and its control algorithm has been investigated in
general. Also the editorial bugs in the previous article have been
corrected and some translational ambiguities have been resolved.
Initially by constructing several prototypes and carrying out many
flight tests the main design parameters of this air vehicle were
obtained by experimental measurements. Eventually the required
main monocopter for this project was constructed. After construction
of the monocopter in order to design, implementation and testing of
control algorithms first a simple optic system used for determining
the heading angle. After doing numerous tests on Test Stand, the
control algorithm designed and timing of applying control inputs
adjusted. Then other control parameters of system were tuned in
flight tests. Eventually the final control system designed and
implemented using the AHRS sensor and the final operational tests
performed successfully.
Abstract: Components with sensory properties such as gentelligent components developed at the Collaborative Research Centre 653 offer a new angle in terms of the full utilization of the remaining service life as well as preventive maintenance. The developed methodology of component status driven maintenance analyzes the stress data obtained during the component's useful life and on the basis of this knowledge assesses the type of maintenance required in this case. The procedure is derived from the case-based reasoning method and will be explained in detail. The method's functionality is demonstrated with real-life data obtained during test runs of a racing car prototype.
Abstract: Structured Query Language (SQL) is the standard de facto language to access and manipulate data in a relational database. Although SQL is a language that is simple and powerful, most novice users will have trouble with SQL syntax. Thus, we are presenting SQL generator tool which is capable of translating actions and displaying SQL commands and data sets simultaneously. The tool was developed based on Model-View-Controller (MVC) pattern. The MVC pattern is a widely used software design pattern that enforces the separation between the input, processing, and output of an application. Developers take full advantage of it to reduce the complexity in architectural design and to increase flexibility and reuse of code. In addition, we use White-Box testing for the code verification in the Model module.
Abstract: Urban public spaces are sutured with a range of
surveillance and sensor technologies that claim to enable new forms
of ‘data based citizen participation’, but also increase the tendency
for ‘function-creep’, whereby vast amounts of data are gathered,
stored and analysed in a broad application of urban surveillance. This
kind of monitoring and capacity for surveillance connects with
attempts by civic authorities to regulate, restrict, rebrand and reframe
urban public spaces. A direct consequence of the increasingly
security driven, policed, privatised and surveilled nature of public
space is the exclusion or ‘unfavourable inclusion’ of those considered
flawed and unwelcome in the ‘spectacular’ consumption spaces of
many major urban centres. In the name of urban regeneration,
programs of securitisation, ‘gentrification’ and ‘creative’ and ‘smart’
city initiatives refashion public space as sites of selective inclusion
and exclusion. In this context of monitoring and control procedures,
in particular, children and young people’s use of space in parks,
neighbourhoods, shopping malls and streets is often viewed as a
threat to the social order, requiring various forms of remedial action.
This paper suggests that cities, places and spaces and those who
seek to use them, can be resilient in working to maintain and extend
democratic freedoms and processes enshrined in Marshall’s concept
of citizenship, calling sensor and surveillance systems to account.
Such accountability could better inform the implementation of public
policy around the design, build and governance of public space and
also understandings of urban citizenship in the sensor saturated urban
environment.
Abstract: Creating a database scheme is essentially a manual
process. From a requirement specification the information contained
within has to be analyzed and reduced into a set of tables, attributes
and relationships. This is a time consuming process that has to go
through several stages before an acceptable database schema is
achieved. The purpose of this paper is to implement a Natural
Language Processing (NLP) based tool to produce a relational
database from a requirement specification. The Stanford CoreNLP
version 3.3.1 and the Java programming were used to implement the
proposed model. The outcome of this study indicates that a first draft
of a relational database schema can be extracted from a requirement
specification by using NLP tools and techniques with minimum user
intervention. Therefore this method is a step forward in finding a
solution that requires little or no user intervention.
Abstract: This study presents a cost-effective approach for rapid
fabricating modeling platforms utilized in fused deposition modeling
system. A small-batch production of modeling platforms about 20
pieces can be obtained economically through silicone rubber mold
using vacuum casting without applying the plastic injection molding.
The air venting systems is crucial for fabricating modeling platform
using vacuum casting. Modeling platforms fabricated can be used for
building rapid prototyping model after sandblasting. This study offers
industrial value because it has both time-effectiveness and
cost-effectiveness.
Abstract: Animal fats (camel, sheep, goat, rabbit and chicken)
and vegetable oils (corn, sunflower, palm oil and olive oil) were
substituted with different proportions (1, 5, 10 and 20%) of lard.
Fatty acid composition in TG and 2-MG were determined using
lipase hydrolysis and gas chromatography before and after
adulteration. Results indicated that, genuine lard had a high
proportion (60.97%) of the total palmitic acid at 2-MG. However, it
was 8.70%, 16.40%, 11.38%, 10.57%, 29.97 and 8.97% for camel,
beef, sheep, goat, rabbit and chicken, respectively. It could be noticed
also the position-2-MG is mostly occupied by unsaturated fatty acids
among all tested fats except lard. Vegetable oils (corn, sunflower,
palm oil and olive oil) revealed that the levels of palmitic acid
esterifies at 2-MG position was 6.84, 1.43, 9.86 and 1.70%,
respectively. It could be observed also the studied oils had a higher
level of unsaturated fatty acids in the same position, compared with
animal fats under investigation. Moreover, palmitic acid esterifies at
2-MG and PAEF increased gradually as the substituted levels
increased among all tested fat and oil samples. Statistical analysis
showed that the PAEF correlated well with lard level. The detection
of lard in some commercial processed foods (5 French fries, 4 Butter
fats, 5 processed meat and 6 candy samples) was carried out. Results
revealed that 2 samples of French fries and 4 samples of processed
meat contained lard due to their higher PAEF, while butter fat and
candy were free of lard.