Abstract: There have been numerous implementations of
security system using biometric, especially for identification and
verification cases. An example of pattern used in biometric is the iris
pattern in human eye. The iris pattern is considered unique for each
person. The use of iris pattern poses problems in encoding the human
iris.
In this research, an efficient iris recognition method is proposed.
In the proposed method the iris segmentation is based on the
observation that the pupil has lower intensity than the iris, and the
iris has lower intensity than the sclera. By detecting the boundary
between the pupil and the iris and the boundary between the iris and
the sclera, the iris area can be separated from pupil and sclera. A step
is taken to reduce the effect of eyelashes and specular reflection of
pupil. Then the four levels Coiflet wavelet transform is applied to the
extracted iris image. The modified Hamming distance is employed to
measure the similarity between two irises.
This research yields the identification success rate of 84.25% for
the CASIA version 1.0 database. The method gives an accuracy of
77.78% for the left eyes of MMU 1 database and 86.67% for the
right eyes. The time required for the encoding process, from the
segmentation until the iris code is generated, is 0.7096 seconds.
These results show that the accuracy and speed of the method is
better than many other methods.
Abstract: This research project aims to investigate difference in
relative rates concerning phosphoryl transfer relevant to biological
catalysis of DNA and RNA in the pH-independent reactions.
Activated Models of DNA and RNA for alkyl-aryl phosphate diesters
(with 4-nitrophenyl as a good leaving group) have successfully been
prepared to gather kinetic parameters. Eyring plots for the pH–
independent hydrolysis of 1 and 2 were established at different
temperatures in the range 100–160 °C. These measurements have
been used to provide a better estimate for the difference in relative
rates between the reactivity of DNA and RNA cleavage. Eyring plot
gave an extrapolated rate of kH2O = 1 × 10-10 s -1 for 1 (RNA model)
and 2 (DNA model) at 25°C. Comparing the reactivity of RNA
model and DNA model shows that the difference in relative rates in
the pH-independent reactions is surprisingly very similar at 25°. This
allows us to obtain chemical insights into how biological catalysts
such as enzymes may have evolved to perform their current
functions.
Abstract: In this study, the problem of discriminating between interictal epileptic and non- epileptic pathological EEG cases, which present episodic loss of consciousness, investigated. We verify the accuracy of the feature extraction method of autocross-correlated coefficients which extracted and studied in previous study. For this purpose we used in one hand a suitable constructed artificial supervised LVQ1 neural network and in other a cross-correlation technique. To enforce the above verification we used a statistical procedure which based on a chi- square control. The classification and the statistical results showed that the proposed feature extraction is a significant accurate method for diagnostic discrimination cases between interictal and non-interictal EEG events and specifically the classification procedure showed that the LVQ neural method is superior than the cross-correlation one.
Abstract: In order to achieve competitive advantage and better
performance of firm, supply chain management (SCM) strategy
should support and drive forward business strategy. It means that
supply chain should be aligned with business strategy, at the same
time supply chain (SC) managers need to use appropriate information
system (IS) solution to support their strategy, which would lead to
stay competitive. There are different kinds of IS strategies which
enable managers to meet the SC requirement by selecting the best IS
strategy. Therefore, it is important to align IS strategies and practices
with SC strategies and practices, which could help us to plan for an
IS application that supports and enhances a SCMS. In this study,
aligning IS with SC in strategy level is considered. The main aim of
this paper is to align the various IS strategies with SCM strategies
and demonstrate their impact on SC and firm performance.
Abstract: The purpose of this research aims to discover the
knowledge for analysis student motivation behavior on e-Learning
based on Data Mining Techniques, in case of the Information
Technology for Communication and Learning Course at Suan
Sunandha Rajabhat University. The data mining techniques was
applied in this research including association rules, classification
techniques. The results showed that using data mining technique can
indicate the important variables that influence the student motivation
behavior on e-Learning.
Abstract: In aircraft applications, according to the nature of
electrical equipment its location may be in unpressurized area or very
close to the engine; thus, the environmental conditions may change
from atmospheric pressure to less than 100 mbar, and the temperature
may be higher than the ambient one as in most real working
conditions of electrical equipment. Then, the classical Paschen curve
has to be replotted since these parameters may affect the discharge
ignition voltage. In this paper, we firstly investigate the domain of
validity of two corrective expressions on the Paschen-s law found in
the literature, in case of changing the air environment and known as
Peek and Dunbar corrections. Results show that these corrections are
no longer valid for combined variation of temperature and pressure.
After that, a new empirical expression for breakdown voltage is
proposed and is validated in the case of combined variations of
temperature and pressure.
Abstract: This paper presents performance analysis of the
Evolutionary Programming-Artificial Neural Network (EPANN)
based technique to optimize the architecture and training parameters
of a one-hidden layer feedforward ANN model for the prediction of
energy output from a grid connected photovoltaic system. The ANN
utilizes solar radiation and ambient temperature as its inputs while the
output is the total watt-hour energy produced from the grid-connected
PV system. EP is used to optimize the regression performance of the
ANN model by determining the optimum values for the number of
nodes in the hidden layer as well as the optimal momentum rate and
learning rate for the training. The EPANN model is tested using two
types of transfer function for the hidden layer, namely the tangent
sigmoid and logarithmic sigmoid. The best transfer function, neural
topology and learning parameters were selected based on the highest
regression performance obtained during the ANN training and testing
process. It is observed that the best transfer function configuration for
the prediction model is [logarithmic sigmoid, purely linear].
Abstract: The potential of entomopathogenic nematodes in suppressing T. squalida population on cauliflower from transplanting to harvest was evaluated. Significant reductions in plant infestation percentage and population density (/m2) were recorded throughout the plantation seasons, 2011 and 2012 before and after spraying the plants. The percent reduction in numbers/m2 was the highest in March for the treatments with Heterorhabditis indica Behera and Heterorhabditis bacteriophora Giza during the plantation season 2011, while at the plantation season 2012, the reduction in population density was the highest in January for Heterorhabditis Indica Behera and in February for H . bacteriophora Giza treatments. In a comparison test with conventional insecticides Hostathion and Lannate, there were no significant differences in control measures resulting from treatments with H. indica Behera, H. bacteriophora Giza and Lannate. At the plantation season is 2012. Also, the treatments reduced the economic threshold of T. squalida on cauliflower in this experiment as compared with before and after spraying with both the two entomopathogenic nematodes at both seasons 2011 and 2012. This means an increase in the marketability of heads harvested as a consequence of monthly treatments.
Abstract: This paper presents an on-going research work on the
implementation of feature-based machining via macro programming.
Repetitive machining features such as holes, slots, pockets etc can
readily be encapsulated in macros. Each macro consists of methods
on how to machine the shape as defined by the feature. The macro
programming technique comprises of a main program and
subprograms. The main program allows user to select several
subprograms that contain features and define their important
parameters. With macros, complex machining routines can be
implemented easily and no post processor is required. A case study
on machining of a part that comprised of planar face, hole and pocket
features using the macro programming technique was carried out. It
is envisaged that the macro programming technique can be extended
to other feature-based machining fields such as the newly developed
STEP-NC domain.
Abstract: Data clustering is an important data exploration
technique with many applications in data mining. The k-means
algorithm is well known for its efficiency in clustering large data
sets. However, this algorithm is suitable for spherical shaped clusters
of similar sizes and densities. The quality of the resulting clusters
decreases when the data set contains spherical shaped with large
variance in sizes. In this paper, we introduce a competent procedure
to overcome this problem. The proposed method is based on shifting
the center of the large cluster toward the small cluster, and recomputing
the membership of small cluster points, the experimental
results reveal that the proposed algorithm produces satisfactory
results.
Abstract: Generation of electricity from coal has increased over
the years in the United States and around the world. Burning of coal
results in annual production of upwards of 100 millions tons (United
States only) of coal combustion products (CCPs). Only about a third
of these products are being used to create new products while the
remainder goes to landfills. Application of CCPs mixed with
composted organic materials onto soil can improve the soil-s
physico-chemical conditions and provide essential plant nutritients.
Our objective was to create plant growth media utilizing CCPs and
compost in way which maximizes the use of these products and, at
the same time, maintain good plant growth. Media were formulated
by adding composted organic matter (COM) to CCPs at ratios
ranging from 2:8 to 8:2 (v/v). The quality of these media was
evaluated by measuring their physical and chemical properties and
their effect on plant growth. We tested the media by 1) measuring
their physical and chemical properties and 2) the growth of three
plant species in the experimental media: wheat (Triticum sativum),
tomato (Lycopersicum esculentum) and marigold (Tagetes patula).
We achieved significantly (p < 0.001) higher growth (7-130%) in the
experimental media containing CCPs compared to a commercial mix.
The experimental media supplied adequate plant nutrition as no
fertilization was provided during the experiment. Based on the
results, we recommend the use of CCPs and composts for the
creation of plant growth media.
Abstract: This paper aims to propose a novel, robust, and simple method for obtaining a human 3D face model and camera pose (position and orientation) from a video sequence. Given a video sequence of a face recorded from an off-the-shelf digital camera, feature points used to define facial parts are tracked using the Active- Appearance Model (AAM). Then, the face-s 3D structure and camera pose of each video frame can be simultaneously calculated from the obtained point correspondences. This proposed method is primarily based on the combined approaches of Gradient Descent and Powell-s Multidimensional Minimization. Using this proposed method, temporarily occluded point including the case of self-occlusion does not pose a problem. As long as the point correspondences displayed in the video sequence have enough parallax, these missing points can still be reconstructed.
Abstract: This paper presents the analysis of similarity between local decisions, in the process of alphanumeric hand-prints classification. From the analysis of local characteristics of handprinted numerals and characters, extracted by a zoning method, the set of classification decisions is obtained and the similarity among them is investigated. For this purpose the Similarity Index is used, which is an estimator of similarity between classifiers, based on the analysis of agreements between their decisions. The experimental tests, carried out using numerals and characters from the CEDAR and ETL database, respectively, show to what extent different parts of the patterns provide similar classification decisions.
Abstract: This paper discusses the issue of tribal development,
displacement, rehabilitation and resettlement policies, and
implementation in the agency (scheduled / tribal) areas of the West
Godavari District, Andhra Pradesh State, India. This study is based
on action anthropological approach, conducted among the displaced
tribal communities i.e. Konda Reddis and Nayakapods of this region,
under the 'Kovvada Reservoir' Project. These groups are
traditionally shifting cultivators and popularly known as the
Primitive Tribal Groups (PTGs) in the government records. This
paper also focuses on the issues of tribal displacement and land
alienation due to construction of the Kovvada reservoir, without
proper rehabilitation and resettlement, although there are well
defined guidelines, procedures and norms for the rehabilitation of
Project Affected Persons (PAPs). It is necessary to begin with, to
provide an overview of the issues in tribal development and policies
related to displacement and rehabilitation in the Indian context as a
background to the Kovvada Reservoir Project, the subject of this
study.
Abstract: Avionics software is safe-critical embedded software
and its architecture is evolving from traditional federated architectures
to Integrated Modular Avionics (IMA) to improve resource usability.
ARINC 653 (Avionics Application Standard Software Interface) is a
software specification for space and time partitioning in Safety-critical
avionics Real-time operating systems. Arinc653 uses two-level
scheduling strategies, but current modeling tools only apply to simple
problems of Arinc653 two-level scheduling, which only contain time
property. In avionics industry, we are always manually allocating
tasks and calculating the timing table of a real-time system to ensure
it-s running as we design. In this paper we represent an automatically
generating strategy which applies to the two scheduling problems with
dependent constraints in Arinc653 partition run-time environment. It
provides the functionality of automatic generation from the task and partition models to scheduling policy through allocating the tasks to the partitions while following the constraints, and then we design a simulating mechanism to check whether our policy is schedulable or
not
Abstract: The automatic construction of large, high-resolution
image vistas (mosaics) is an active area of research in the fields of
photogrammetry [1,2], computer vision [1,4], medical image
processing [4], computer graphics [3] and biometrics [8]. Image
stitching is one of the possible options to get image mosaics. Vista
Creation in image processing is used to construct an image with a
large field of view than that could be obtained with a single
photograph. It refers to transforming and stitching multiple images
into a new aggregate image without any visible seam or distortion in
the overlapping areas. Vista creation process aligns two partial
images over each other and blends them together. Image mosaics
allow one to compensate for differences in viewing geometry. Thus
they can be used to simplify tasks by simulating the condition in
which the scene is viewed from a fixed position with single camera.
While obtaining partial images the geometric anomalies like rotation,
scaling are bound to happen. To nullify effect of rotation of partial
images on process of vista creation, we are proposing rotation
invariant vista creation algorithm in this paper. Rotation of partial
image parts in the proposed method of vista creation may introduce
some missing region in the vista. To correct this error, that is to fill
the missing region further we have used image inpainting method on
the created vista. This missing view regeneration method also
overcomes the problem of missing view [31] in vista due to cropping,
irregular boundaries of partial image parts and errors in digitization
[35]. The method of missing view regeneration generates the missing
view of vista using the information present in vista itself.
Abstract: The theatre-auditorium under investigation following
the highly reflective characteristics of materials used in it (marble,
painted wood, smooth plaster, etc), architectural and structural
features of the Protocol and its intended use (very multifunctional:
Auditorium, theatre, cinema, musicals, conference room) from the
analysis of the statement of fact made by the acoustic simulation
software Ramsete and supported by data obtained through a
campaign of acoustic measurements of the state of fact made on the
spot by a Fonomet Svantek model SVAN 957, appears to be
acoustically inadequate. After the completion of the 3D model
according to the specifications necessary software used forecast in
order to be recognized by him, have made three simulations, acoustic
simulation of the state of and acoustic simulation of two design
solutions.
Improved noise characteristics found in the first design solution,
compared to the state in fact consists therefore in lowering
Reverberation Time that you turn most desirable value, while the
Indicators of Clarity, the Baricentric Time, the Lateral Efficiency,
Ratio of Low Tmedia BR and defined the Speech Intelligibility
improved significantly. Improved noise characteristics found instead
in the second design solution, as compared to first design solution, is
finally mostly in a more uniform distribution of Leq and in lowering
Reverberation Time that you turn the optimum values. Indicators of
Clarity, and the Lateral Efficiency improve further but at the expense
of a value slightly worse than the BR. Slightly vary the remaining
indices.
Abstract: In the present study, the oleaginous fungus
Mortierella alpina CBS 754.68 was screened for arachidonic
acidproduction using inexpensive agricultural by-products as
substrate. Four oilcakes were analysed to choose the best substrate
among them. Sunflower oilcake was the most effective substrate for
ARA production followed by soybean, colza and olive oilcakes. In
the next step, seven variables including substrate particle size,
moisture content, time, temperature, yeast extract supply, glucose
supply and glutamate supply were surveyed and effective variables
for ARA production were determined using a Plackett-Burman
screening design. Analysis results showed that time (12 days),
substrate particle size (1-1.4 mm) and temperature (20ºC) were the
most effective variables for the highest level of ARA production
respectively.
Abstract: Performance of vehicle depends on driving patterns
and vehicle drive train configuration. Driving patterns depends on
traffic condition, road condition and driver behavior. HEV design is
carried out under certain constrain like vehicle operating range,
acceleration, decelerations, maximum speed and road grades which
are directly related to the driving patterns. Therefore the detailed
study on HEV performance over a different drive cycle is required
for selection and sizing of HEV components. A simple hardware is
design to measured velocity v/s time profile of the vehicle by
operating vehicle on Indian roads under real traffic conditions. To
size the HEV components, a detailed dynamic model of the vehicle is
developed considering the effect of inertia of rotating components
like wheels, drive chain, engine and electric motor. Using vehicle
model and different Indian drive cycles data, total tractive power
demanded by vehicle and power supplied by individual components
has been calculated.Using above information selection and estimation
of component sizing for HEV is carried out so that HEV performs
efficiently under hostile driving condition. Complete analysis is
carried out in LABVIEW.
Abstract: With increasing data in medical databases, medical
data retrieval is growing in popularity. Some of this analysis
including inducing propositional rules from databases using many
soft techniques, and then using these rules in an expert system.
Diagnostic rules and information on features are extracted from
clinical databases on diseases of congenital anomaly. This paper
explain the latest soft computing techniques and some of the
adaptive techniques encompasses an extensive group of methods
that have been applied in the medical domain and that are used for
the discovery of data dependencies, importance of features,
patterns in sample data, and feature space dimensionality
reduction. These approaches pave the way for new and interesting
avenues of research in medical imaging and represent an important
challenge for researchers.