Abstract: With the exponential growth of networked system and
application such as eCommerce, the demand for effective internet
security is increasing. Cryptology is the science and study of systems
for secret communication. It consists of two complementary fields of
study: cryptography and cryptanalysis. The application of genetic
algorithms in the cryptanalysis of knapsack ciphers is suggested by
Spillman [7]. In order to improve the efficiency of genetic algorithm
attack on knapsack cipher, the previously published attack was
enhanced and re-implemented with variation of initial assumptions
and results are compared with Spillman results. The experimental
result of research indicates that the efficiency of genetic algorithm
attack on knapsack cipher can be improved with variation of initial
assumption.
Abstract: We have defined two suites of metrics, which cover
static and dynamic aspects of component assembly. The static
metrics measure complexity and criticality of component assembly,
wherein complexity is measured using Component Packing Density
and Component Interaction Density metrics. Further, four criticality
conditions namely, Link, Bridge, Inheritance and Size criticalities
have been identified and quantified. The complexity and criticality
metrics are combined to form a Triangular Metric, which can be used
to classify the type and nature of applications. Dynamic metrics are
collected during the runtime of a complete application. Dynamic
metrics are useful to identify super-component and to evaluate the
degree of utilisation of various components. In this paper both static
and dynamic metrics are evaluated using Weyuker-s set of properties.
The result shows that the metrics provide a valid means to measure
issues in component assembly. We relate our metrics suite with
McCall-s Quality Model and illustrate their impact on product
quality and to the management of component-based product
development.
Abstract: Partial discharge (PD) detection is an important
method to evaluate the insulation condition of metal-clad apparatus.
Non-intrusive sensors which are easy to install and have no
interruptions on operation are preferred in onsite PD detection.
However, it often lacks of accuracy due to the interferences in PD
signals. In this paper a novel PD extraction method that uses frequency
analysis and entropy based time-frequency (TF) analysis is introduced.
The repetitive pulses from convertor are first removed via frequency
analysis. Then, the relative entropy and relative peak-frequency of
each pulse (i.e. time-indexed vector TF spectrum) are calculated and
all pulses with similar parameters are grouped. According to the
characteristics of non-intrusive sensor and the frequency distribution
of PDs, the pulses of PD and interferences are separated. Finally the
PD signal and interferences are recovered via inverse TF transform.
The de-noised result of noisy PD data demonstrates that the
combination of frequency and time-frequency techniques can
discriminate PDs from interferences with various frequency
distributions.
Abstract: Ontology is widely being used as a tool for organizing
information, creating the relation between the subjects within the
defined knowledge domain area. Various fields such as Civil,
Biology, and Management have successful integrated ontology in
decision support systems for managing domain knowledge and to
assist their decision makers. Gross pollutant traps (GPT) are devices
used in trapping and preventing large items or hazardous particles in
polluting and entering our waterways. However choosing and
determining GPT is a challenge in Malaysia as there are inadequate
GPT data repositories being captured and shared. Hence ontology is
needed to capture, organize and represent this knowledge into
meaningful information which can be contributed to the efficiency of
GPT selection in Malaysia urbanization. A GPT Ontology framework
is therefore built as the first step to capture GPT knowledge which
will then be integrated into the decision support system. This paper
will provide several examples of the GPT ontology, and explain how
it is constructed by using the Protégé tool.
Abstract: Simultaneous transient conduction and radiation heat
transfer with heat generation is investigated. Analysis is carried out
for both steady and unsteady situations. two-dimensional gray
cylindrical enclosure with an absorbing, emitting, and isotropically
scattering medium is considered. Enclosure boundaries are assumed
at specified temperatures. The heat generation rate is considered
uniform and constant throughout the medium. The lattice Boltzmann
method (LBM) was used to solve the energy equation of a transient
conduction-radiation heat transfer problem. The control volume finite
element method (CVFEM) was used to compute the radiative
information. To study the compatibility of the LBM for the energy
equation and the CVFEM for the radiative transfer equation, transient
conduction and radiation heat transfer problems in 2-D cylindrical
geometries were considered. In order to establish the suitability of the
LBM, the energy equation of the present problem was also solved
using the the finite difference method (FDM) of the computational
fluid dynamics. The CVFEM used in the radiative heat transfer was
employed to compute the radiative information required for the
solution of the energy equation using the LBM or the FDM (of the
CFD). To study the compatibility and suitability of the LBM for the
solution of energy equation and the CVFEM for the radiative
information, results were analyzed for the effects of various
parameters such as the boundary emissivity. The results of the LBMCVFEM
combination were found to be in excellent agreement with
the FDM-CVFEM combination. The number of iterations and the
steady state temperature in both of the combinations were found
comparable. Results are found for situations with and without heat
generation. Heat generation is found to have significant bearing on
temperature distribution.
Abstract: In this paper, we propose a reversible watermarking
scheme based on histogram shifting (HS) to embed watermark bits
into the H.264/AVC standard videos by modifying the last nonzero
level in the context adaptive variable length coding (CAVLC) domain.
The proposed method collects all of the last nonzero coefficients (or
called last level coefficient) of 4×4 sub-macro blocks in a macro
block and utilizes predictions for the current last level from the
neighbor block-s last levels to embed watermark bits. The feature of
the proposed method is low computational and has the ability of
reversible recovery. The experimental results have demonstrated that
our proposed scheme has acceptable degradation on video quality and
output bit-rate for most test videos.
Abstract: This work presents the results of a study carried out to
determine the sliding wear behavior and its effect on the process
parameters of components manufactured by direct metal laser
sintering (DMLS). A standard procedure and specimen had been used
in the present study to find the wear behavior. Using Taguchi-s
experimental technique, an orthogonal array of modified L8 had been
developed. Sliding wear testing using pin-on-disk machine was
carried out and analysis of variance (ANOVA) technique was used to
investigate the effect of process parameters and to identify the main
process parameter that influences the properties of wear behavior on
the DMLS components. It has been found that part orientation, one
of the selected process parameter had more influence on wear as
compared to other selected process parameters.
Abstract: Toughening of polyamide 6 (PA6)/ Nanoclay (NC) nanocomposites with styrene-ethylene/butadiene-styrene copolymer (SEBS) using maleated styrene-ethylene/butadiene-styrene copolymer (mSEBS)/ as a compatibilizer were investigated by blending them in a co-rotating twin-screw extruder. Response surface method of experimental design was used for optimizing the material and processing parameters. Effect of four factors, including SEBS, mSEBS and NC contents as material variables and order of mixing as a processing factor, on toughness of hybrid nanocomposites were studied. All the prepared samples showed ductile behavior and low temperature Izod impact toughness of some of the hybrid nanocomposites demonstrated 900% improvement compared to the PA6 matrix while the modulus showed maximum enhancement of 20% compared to the pristine PA6 resin.
Abstract: Prestressing in structure increases ratio of load-bearing capacity to weight. Suspendomes are single-layer braced domes reinforced with cable and strut. Prestressing of cables alter value and distribution of stress in structure. In this study two configuration, diamatic and lamella domes is selected. Investigated domes have span of 100m with rise-to-span ratios of 0.1, 0.2, and 0.3. Single layer domes loaded under service load combinations according to ISO code. After geometric nonlinear analysis, models are designed with tubular and I-shaped sections then reinforced with cable and strut and converted to suspendomes. Displacements and stresses of some groups of nodes and elements in all of single-layer domes and suspendomes for three load combinations, symmetric snow, asymmetric snow and wind are compared. Variation due to suspending system is investigated. Suspendomes are redesigned and minimum possible weight after addition of cable and strut is obtained.
Abstract: Subjective loneliness describes people who feel a
disagreeable or unacceptable lack of meaningful social relationships,
both at the quantitative and qualitative level. The studies to be
presented tested an Italian 18-items self-report loneliness measure,
that included items adapted from scales previously developed,
namely a short version of the UCLA (Russell, Peplau and Cutrona,
1980), and the 11-items Loneliness scale by De Jong-Gierveld &
Kamphuis (JGLS; 1985). The studies aimed at testing the developed
scale and at verifying whether loneliness is better conceptualized as a
unidimensional (so-called 'general loneliness') or a bidimensional
construct, namely comprising the distinct facets of social and
emotional loneliness. The loneliness questionnaire included 2 singleitem
criterion measures of sad mood, and social contact, and asked
participants to supply information on a number of socio-demographic
variables. Factorial analyses of responses obtained in two
preliminary studies, with 59 and 143 Italian participants respectively,
showed good factor loadings and subscale reliability and confirmed
that perceived loneliness has clearly two components, a social and an
emotional one, the latter measured by two subscales, a 7-item
'general' loneliness subscale derived from UCLA, and a 6–item
'emotional' scale included in the JGLS. Results further showed that
type and amount of loneliness are related, negatively, to frequency of
social contacts, and, positively, to sad mood. In a third study data
were obtained from a nation-wide sample of 9.097 Italian subjects,
12 to about 70 year-olds, who filled the test on-line, on the Italian
web site of a large-audience magazine, Focus. The results again
confirmed the reliability of the component subscales, namely social,
emotional, and 'general' loneliness, and showed that they were
highly correlated with each other, especially the latter two.
Loneliness scores were significantly predicted by sex, age, education
level, sad mood and social contact, and, less so, by other variables –
e.g., geographical area and profession. The scale validity was
confirmed by the results of a fourth study, with elderly men and
women (N 105) living at home or in residential care units. The three
subscales were significantly related, among others, to depression, and
to various measures of the extension of, and satisfaction with, social
contacts with relatives and friends. Finally, a fifth study with 315
career-starters showed that social and emotional loneliness correlate
with life satisfaction, and with measures of emotional intelligence.
Altogether the results showed a good validity and reliability in the
tested samples of the entire scale, and of its components.
Abstract: This paper presents a numerical analysis of the
seismic behaviour of earth dams. Analysis is conducted for the solid
phase. It may correspond to the response of the dam before water
filling. Analysis is conducted for a simple case which concerns the
elastic response of the dam. Numerical analyses are conducted using
the FLAC3D program. The behaviour of the Shell and core of the
dam and the foundation behaviour is assumed to be elastic. Result
shows the influence of the variation of the shear modulus of the core
and shell on the seismic amplification of the dam. It can be observed
that the variation of the shearing modulus of the core leads to a
moderate increase in the dynamic amplification and the increase in
the shell shearing modulus leads to a significant increase in the
dynamic amplification.
Abstract: This paper tries to shed light on the existence of a bank lending channel (BLC) in South Eastern European countries (SEE). Based on a VAR framework we test the responsiveness of credit supply to monetary policy shocks. By compiling a new data set and using the reserve requirement ratio, among others, as the policy instrument we measure the effectiveness of the BLC and the buffering effect of the banks in the SEE countries. The results indicate that loan supply is significantly affected by shifts in monetary policy, when demand factors are controlled. Furthermore, by analyzing the effect of the Greek banks in the region we conclude that Greek banks do buffer the negative effects of monetary policy transmission. By having a significant market share of the SEE-s banking markets we argue that Greek banks influence positively the economic growth of SEE countries.
Abstract: Cellular networks provide voice and data services to the users with mobility. To deliver services to the mobile users, the cellular network is capable of tracking the locations of the users, and allowing user movement during the conversations. These capabilities are achieved by the location management. Location management in mobile communication systems is concerned with those network functions necessary to allow the users to be reached wherever they are in the network coverage area. In a cellular network, a service coverage area is divided into smaller areas of hexagonal shape, referred to as cells. The cellular concept was introduced to reuse the radio frequency. Continued expansion of cellular networks, coupled with an increasingly restricted mobile spectrum, has established the reduction of communication overhead as a highly important issue. Much of this traffic is used in determining the precise location of individual users when relaying calls, with the field of location management aiming to reduce this overhead through prediction of user location. This paper describes and compares various location management schemes in the cellular networks.
Abstract: This paper mathematically analyses the varying
magnitude of production loss, which may occur due to idle time (inprocess
waiting time and traveling time) on a linear walking worker
assembly line. Within this flexible and reconfigurable assembly
system, each worker travels down the line carrying out each
assembly task at each station; and each worker accomplishes the
assembly of a unit from start to finish and then travels back to the
first station to start the assembly of a new product. This strategy of
system design attempts to combine the flexibility of the U-shaped
moving worker assembly cell with the efficiency of the conventional
fixed worker assembly line. The paper aims to evaluate the effect of
idle time that may offset the labor efficiency of each walking worker
providing an insight into the mechanism of such a flexible and
reconfigurable assembly system.
Abstract: A new technique to quantify the differential mode
delay (DMD) in multimode fiber (MMF) is been presented. The
technique measures DMD based on angular launch and
measurements of the difference in modal delay using variable
apertures at the fiber face. The result of the angular spatial filtering
revealed less excitation of higher order modes when the laser beam is
filtered at higher angles. This result would indicate that DMD
profiles would experience a data pattern dependency.
Abstract: Aerial and satellite images are information rich. They are also complex to analyze. For GIS systems, many features require fast and reliable extraction of roads and intersections. In this paper, we study efficient and reliable automatic extraction algorithms to address some difficult issues that are commonly seen in high resolution aerial and satellite images, nonetheless not well addressed in existing solutions, such as blurring, broken or missing road boundaries, lack of road profiles, heavy shadows, and interfering surrounding objects. The new scheme is based on a new method, namely reference circle, to properly identify the pixels that belong to the same road and use this information to recover the whole road network. This feature is invariable to the shape and direction of roads and tolerates heavy noise and disturbances. Road extraction based on reference circles is much more noise tolerant and flexible than the previous edge-detection based algorithms. The scheme is able to extract roads reliably from images with complex contents and heavy obstructions, such as the high resolution aerial/satellite images available from Google maps.
Abstract: An analytical solution for dispersion of a solute in the
peristaltic motion of a couple stress fluid in the presence of magnetic
field with both homogeneous and heterogeneous chemical reactions is
presented. The average effective dispersion coefficient has been found
using Taylor-s limiting condition and long wavelength approximation.
The effects of various relevant parameters on the average effective
coefficient of dispersion have been studied. The average effective
dispersion coefficient tends to decrease with magnetic field parameter,
homogeneous chemical reaction rate parameter and amplitude ratio
but tends to increase with heterogeneous chemical reaction rate
parameter.
Abstract: High-voltage power transmission lines are the back
bone of electrical power utilities. The stability and continuous
monitoring of this critical infrastructure is pivotal. Nine-Sigma
representing Eskom Holding SOC limited, South Africa has a major
problem on proactive detection of fallen power lines and real time
sagging measurement together with slipping of such conductors. The
main objective of this research is to innovate RFID technology to
solve this challenge. Various options and technologies such as GPS,
PLC, image processing, MR sensors and etc., have been reviewed
and draw backs were made. The potential of RFID to give precision
measurement will be observed and presented. The future research
will look at magnetic and electrical interference as well as corona
effect on the technology.
Abstract: School physical education, through its objectives and
contents, efficiently valorizes the pupils- abilities, developing them,
especially the coordinative skill component, which is the basis of
movement learning, of the development of the daily motility and also
of the special, refined motility required by the practice of certain
sports. Medium school age offers the nervous and motor substratum
needed for the acquisition of complex motor habits, a substratum that
is essential for the coordinative skill. Individuals differ as to the level
at which this function is performed, the extent to which this function
turns an individual into a person that is adapted and adaptable to
complex and various situations. Spatio-temporal orientation, together
with movement combination and coupling, and with kinesthetic,
balance, motor reaction, movement transformation and rhythm
differentiation form the coordinative skills. From our viewpoint,
these are characteristic features with high levels of manifestation in a
complex psychomotor act - valorizing the quality of one-s talent - as
well as indices pertaining to one-s psychomotor intelligence and
creativity.
Abstract: This paper presents the determination of the proper
quality costs parameters which provide the optimum return. The
system dynamics simulation was applied. The simulation model was
constructed by the real data from a case of the electronic devices
manufacturer in Thailand. The Steepest Descent algorithm was
employed to optimise. The experimental results show that the
company should spend on prevention and appraisal activities for 850
and 10 Baht/day respectively. It provides minimum cumulative total
quality cost, which is 258,000 Baht in twelve months. The effect of
the step size in the stage of improving the variables to the optimum
was also investigated. It can be stated that the smaller step size
provided a better result with more experimental runs. However, the
different yield in this case is not significant in practice. Therefore, the
greater step size is recommended because the region of optima could
be reached more easily and rapidly.