Abstract: According to the increasing utilization in power system, the transmission lines and power plants often operate in stability boundary and system probably lose its stable condition by over loading or occurring disturbance. According to the reasons that are mentioned, the prediction and recognition of voltage instability in power system has particular importance and it makes the network security stronger.This paper, by considering of power system contingencies based on the effects of them on Mega Watt Margin (MWM) and maximum loading point is focused in order to analyse the static voltage stability using continuation power flow method. The study has been carried out on IEEE 14-Bus Test System using Matlab and Psat softwares and results are presented.
Abstract: Heterogeneous repolarization causes dispersion of the T-wave and has been linked to arrhythmogenesis. Such heterogeneities appear due to differential expression of ionic currents in different regions of the heart, both in healthy and diseased animals and humans. Mice are important animals for the study of heart diseases because of the ability to create transgenic animals. We used our previously reported model of mouse ventricular myocytes to develop 2D mouse ventricular tissue model consisting of 14,000 cells (apical or septal ventricular myocytes) and to study the stability of action potential propagation and Ca2+ dynamics. The 2D tissue model was implemented as a FORTRAN program code for highperformance multiprocessor computers that runs on 36 processors. Our tissue model is able to simulate heterogeneities not only in action potential repolarization, but also heterogeneities in intracellular Ca2+ transients. The multicellular model reproduced experimentally observed velocities of action potential propagation and demonstrated the importance of incorporation of realistic Ca2+ dynamics for action potential propagation. The simulations show that relatively sharp gradients of repolarization are predicted to exist in 2D mouse tissue models, and they are primarily determined by the cellular properties of ventricular myocytes. Abrupt local gradients of channel expression can cause alternans at longer pacing basic cycle lengths than gradual changes, and development of alternans depends on the site of stimulation.
Abstract: The problems with high complexity had been the challenge in combinatorial problems. Due to the none-determined and polynomial characteristics, these problems usually face to unreasonable searching budget. Hence combinatorial optimizations attracted numerous researchers to develop better algorithms. In recent academic researches, most focus on developing to enhance the conventional evolutional algorithms and facilitate the local heuristics, such as VNS, 2-opt and 3-opt. Despite the performances of the introduction of the local strategies are significant, however, these improvement cannot improve the performance for solving the different problems. Therefore, this research proposes a meta-heuristic evolutional algorithm which can be applied to solve several types of problems. The performance validates BBEA has the ability to solve the problems even without the design of local strategies.
Abstract: We explore entanglement in composite quantum systems
and how its peculiar properties are exploited in quantum
information and communication protocols by means of Diagrams
of States, a novel method to graphically represent and analyze how
quantum information is elaborated during computations performed
by quantum circuits.
We present quantum diagrams of states for Bell states generation,
measurements and projections, for dense coding and quantum teleportation,
for probabilistic quantum machines designed to perform
approximate quantum cloning and universal NOT and, finally, for
quantum privacy amplification based on entanglement purification.
Diagrams of states prove to be a useful approach to analyze quantum
computations, by offering an intuitive graphic representation of the
processing of quantum information. They also help in conceiving
novel quantum computations, from describing the desired information
processing to deriving the final implementation by quantum gate
arrays.
Abstract: Nowadays, more engineering systems are using some
kind of Artificial Intelligence (AI) for the development of their
processes. Some well-known AI techniques include artificial neural
nets, fuzzy inference systems, and neuro-fuzzy inference systems
among others. Furthermore, many decision-making applications base
their intelligent processes on Fuzzy Logic; due to the Fuzzy
Inference Systems (FIS) capability to deal with problems that are
based on user knowledge and experience. Also, knowing that users
have a wide variety of distinctiveness, and generally, provide
uncertain data, this information can be used and properly processed
by a FIS. To properly consider uncertainty and inexact system input
values, FIS normally use Membership Functions (MF) that represent
a degree of user satisfaction on certain conditions and/or constraints.
In order to define the parameters of the MFs, the knowledge from
experts in the field is very important. This knowledge defines the MF
shape to process the user inputs and through fuzzy reasoning and
inference mechanisms, the FIS can provide an “appropriate" output.
However an important issue immediately arises: How can it be
assured that the obtained output is the optimum solution? How can it
be guaranteed that each MF has an optimum shape? A viable solution
to these questions is through the MFs parameter optimization. In this
Paper a novel parameter optimization process is presented. The
process for FIS parameter optimization consists of the five simple
steps that can be easily realized off-line. Here the proposed process
of FIS parameter optimization it is demonstrated by its
implementation on an Intelligent Interface section dealing with the
on-line customization / personalization of internet portals applied to
E-commerce.
Abstract: A challenged control problem is when the
performance is pushed to the limit. The state-derivative feedback
control strategy directly uses acceleration information for feedback
and state estimation. The derivative part is concerned with the rateof-
change of the error with time. If the measured variable approaches
the set point rapidly, then the actuator is backed off early to allow it
to coast to the required level. Derivative action makes a control
system behave much more intelligently. A sensor measures the
variable to be controlled and the measured in formation is fed back to
the controller to influence the controlled variable. A high gain
problem can be also formulated for proportional plus derivative
feedback transformation. Using MATLAB Simulink dynamic
simulation tool this paper examines a system with a proportional plus
derivative feedback and presents an automatic implementation of
finding an acceptable controlled system. Using feedback
transformations the system is transformed into another system.
Abstract: Robust stability and performance are the two most
basic features of feedback control systems. The harmonic balance
analysis technique enables to analyze the stability of limit cycles
arising from a neural network control based system operating over
nonlinear plants. In this work a robust stability analysis based on the
harmonic balance is presented and applied to a neural based control
of a non-linear binary distillation column with unstructured
uncertainty. We develop ways to describe uncertainty in the form of
neglected nonlinear dynamics and high harmonics for the plant and
controller respectively. Finally, conclusions about the performance of
the neural control system are discussed using the Nyquist stability
margin together with the structured singular values of the uncertainty
as a robustness measure.
Abstract: Over the early years of the 21st century, cities
throughout the Middle East, particularly in the Gulf region have
expanded more rapidly than ever before. Given the presence of a
large volume of high-rise buildings allover the region, the local
authority aims to set a new standard for sustainable development;
with an integrated approach to maintain a balance between economy,
quality, environmental protection and safety of life. In the very near
future, as mandatory requirements, sustainability will be the criteria
that should be included in all building projects. It is well known in
the building sustainability topics that structural design engineers do
not have a key role in this matter. In addition, the LEED (Leadership
in Energy and Environmental Design) has looked almost exclusively
on the environmental components and materials specifications. The
objective of this paper is to focus and establish groundwork for
sustainability techniques and applications related to the RC high-rise
buildings design, from the structural point of view. A set of
recommendations related to local conditions, structural modeling and
analysis is given, and some helpful suggestions for structural design
team work are addressed. This paper attempts to help structural
engineers in identifying the building sustainability design, in order to
meet local needs and achieve alternative solutions at an early stage of
project design.
Abstract: Chromite is one of the principal ore of chromium in which the metal exists as a complex oxide (FeO.Cr2O3).The prepared chromite can be widely used as refractory in high temperature applications. This study describes the use of local chromite ore as refractory material. To study the feasibility of local chromite, chemical analysis and refractoriness are firstly measured. To produce chromite refractory brick, it is pressed under a press of 400 tons, dried and fired at 1580°C for fifty two hours. Then, the standard properties such as cold crushing strength, apparent porosity, apparent specific gravity, bulk density and water absorption that the chromite brick should possess were measured. According to the results obtained, the brick made by local chromite ore was suitable for use as refractory brick.
Abstract: Knowledge of food resource of the houbara which an
endangered species would be a important step toward the
preservation of this bird. Adequate study has not been done in this
field and therefore the food sources of the houbara during the
brooding season was studied in the central steppe of Iran. In order to
determine the density of insect in plant communities the pitfall trap
was used , positioned in five linear transects divided between plant
communities and in two repetitions. The results showed that the
among communities there was a significant difference in term of the
number beetles and ants ( p= 0.01, F2, 29= 4.66) collectively. Also
bush steppe habitat had a higher arthropoda density in comparison
with the shrub steppe habitat. Considering that most houbara nests
were found in the bush steppe habitat .It seems this habitat provides
the most available food supply for the houbara chicks.
Abstract: Jatropha curcas stem was analyzed for chemical
compositions: 19.11% pentosan, 42.99% alphacellulose and 24.11%
lignin based on dry weight of 100-g raw material. The condition to
fractionate cellulose, hemicellulose and lignin in J. curcas stem using
steam explosion was optimized. The procedure started from cutting J.
curcas stem into small pieces and soaked in water for overnight.
After that, they were steam exploded at 214 °C and 21 kg/cm2 for 5
min. The obtained hydrolysate contained 1.55 g/L ferulic acid which
after that was used as substrate for vanillin production by Aspergillus
niger and Pycnoporus cinnabarinus in one-step process. The
maximum 0.65 g/L of vanillin were obtained with the conversion rate
of 45.2% based on the initial ferulic acid.
Abstract: A numerical study on the effect of side-dump angle on
fuel droplets sizing and effective mass fraction have been
investigated in present paper. The mass of fuel vapor inside the
flammability limit is named as the effective mass fraction. In the first
step we have considered a side-dump combustor with dump angle of
0o (acrossthe cylinder) and by increasing the entrance airflow velocity
from 20 to 30, 40 and 50 (m/s) respectively, the mean diameter of
fuel droplets sizing and effective mass fraction have been studied.
After this step, we have changed the dump angle from 0o to 30o,45o
and finally 60o in direction of cylinderand also we have increased the
entrance airflow velocity from 20 up to 50 (m/s) with the amount of
growth of 10(m/s) in each step, to examine its effects on fuel droplets
sizing as well as effective mass fraction. With rise of entrance airflow
velocity, these calculations are repeated in each step too. The results
show, with growth of dump-angle the effective mass fraction has
been decreased and the mean diameter of droplets sizing has been
increased. To fulfill the calculations a modified version of KIVA-3V
code which is a transient, three-dimensional, multiphase,
multicomponent code for the analysis of chemically reacting flows
with sprays, is used.
Abstract: Most known methods for measuring the structural similarity of document structures are based on, e.g., tag measures, path metrics and tree measures in terms of their DOM-Trees. Other methods measures the similarity in the framework of the well known vector space model. In contrast to these we present a new approach to measuring the structural similarity of web-based documents represented by so called generalized trees which are more general than DOM-Trees which represent only directed rooted trees.We will design a new similarity measure for graphs representing web-based hypertext structures. Our similarity measure is mainly based on a novel representation of a graph as strings of linear integers, whose components represent structural properties of the graph. The similarity of two graphs is then defined as the optimal alignment of the underlying property strings. In this paper we apply the well known technique of sequence alignments to solve a novel and challenging problem: Measuring the structural similarity of generalized trees. More precisely, we first transform our graphs considered as high dimensional objects in linear structures. Then we derive similarity values from the alignments of the property strings in order to measure the structural similarity of generalized trees. Hence, we transform a graph similarity problem to a string similarity problem. We demonstrate that our similarity measure captures important structural information by applying it to two different test sets consisting of graphs representing web-based documents.
Abstract: The present work involves measurements to examine
the effects of initial conditions on aerodynamic and acoustic
characteristics of a Jet at M=0.8 by changing the orientation of sharp
edged orifice plate. A thick plate with chamfered orifice presented divergent and convergent openings when it was flipped over. The centerline velocity was found to decay more rapidly for divergent
orifice and that was consistent with the enhanced mass entrainment
suggesting quicker spread of the jet compared with that from the convergent orifice. The mixing layer region elucidated this effect of
initial conditions at an early stage – the growth was found to be comparatively more pronounced for the divergent orifice resulting in
reduced potential core size. The acoustic measurements, carried out in the near field noise region outside the jet within potential core
length, showed the jet from the divergent orifice to be less noisy. The frequency spectra of the noise signal exhibited that in the initial
region of comparatively thin mixing layer for the convergent orifice,
the peak registered a higher SPL and a higher frequency as well. The noise spectra and the mixing layer development suggested a direct correlation between the coherent structures developing in the initial
region of the jet and the noise captured in the surrounding near field.
Abstract: Brushless DC motor with high torque density and slim
topology for easy loading for robot system is proposed and
manufactured. Electromagnetic design is executed by equivalent
magnetic circuit model and numerical analysis. Manufactured motor is
tested and verified characteristics comparing with conventional BLDC
motor.
Abstract: The national economy development affects the vehicle
ownership which ultimately increases fuel consumption. The rise of
the vehicle ownership is dominated by the increasing number of
motorcycles. This research aims to analyze and identify the
characteristics of fuel consumption, the city transportation system,
and to analyze the relationship and the effect of the city
transportation system on the fuel consumption. A multivariable
analysis is used in this study. The data analysis techniques include: a
Multivariate Multivariable Analysis by using the R software. More
than 84% of fuel on Java is consumed in metropolitan and large
cities. The city transportation system variables that strongly effect the
fuel consumption are population, public vehicles, private vehicles and
private bus. This method can be developed to control the fuel
consumption by considering the urban transport system and city
tipology. The effect can reducing subsidy on the fuel consumption,
increasing state economic.
Abstract: In this paper the influence of heterogeneous traffic on
the temporal variation of ambient PM10, PM2.5 and PM1
concentrations at a busy arterial route (Sardar Patel Road) in the
Chennai city has been analyzed. The hourly PM concentration, traffic
counts and average speed of the vehicles have been monitored at the
study site for one week (19th-25th January 2009). Results indicated
that the concentrations of coarse (PM10) and fine PM (PM2.5 and
PM1) concentrations at SP road are having similar trend during peak
and non-peak hours, irrespective of the days. The PM concentrations
showed daily two peaks corresponding to morning (8 to 10 am) and
evening (7 to 9 pm) peak hour traffic flow. The PM10 concentration is
dominated by fine particles (53% of PM2.5 and 45% of PM1). The
high PM2.5/PM10 ratio indicates that the majority of PM10 particles
originate from re-suspension of road dust. The analysis of traffic flow
at the study site showed that 2W, 3W and 4W are having similar
diurnal trend as PM concentrations. This confirms that the 2W, 3W
and 4W are the main emission source contributing to ambient PM
concentration at SP road. The speed measurement at SP road showed
that the average speed of 2W, 3W, 4W, LCV and HCV are 38, 40,
38, 40 and 38 km/hr and 43, 41, 42, 40 and 41 km/hr respectively for
the weekdays and weekdays.
Abstract: In recent years fuel cell vehicles are rapidly appearing
all over the globe. In less than 10 years, fuel cell vehicles have gone
from mere research novelties to operating prototypes and demonstration
models. At the same time, government and industry in development
countries have teamed up to invest billions of dollars in partnerships
intended to commercialize fuel cell vehicles within the early
years of the 21st century.
The purpose of this study is evaluation of model and performance
of fuel cell hybrid electric vehicle in different drive cycles. A fuel
cell system model developed in this work is a semi-experimental
model that allows users to use the theory and experimental relationships
in a fuel cell system. The model can be used as part of a complex
fuel cell vehicle model in advanced vehicle simulator (ADVISOR).
This work reveals that the fuel consumption and energy efficiency
vary in different drive cycles. Arising acceleration and speed in a
drive cycle leads to Fuel consumption increase. In addition, energy
losses in drive cycle relates to fuel cell system power request. Parasitic
power in different parts of fuel cell system will increase when
power request increases. Finally, most of energy losses in drive cycle
occur in fuel cell system because of producing a lot of energy by fuel
cell stack.
Abstract: Grasslands of Iran are encountered with a vast
desertification and destruction. Some legumes are plants of forage
importance with high palatability. Studied legumes in this project are
Onobrychis, Medicago sativa (alfalfa) and Trifolium repens. Seeds
were cultivated in research field of Kaboutarabad (33 km East of
Isfahan, Iran) with an average 80 mm. annual rainfall. Plants were
cultivated in a split plot design with 3 replicate and two water
treatments (weekly irrigation, and under stress with same amount per
15 days interval). Water entrance to each plots were measured by
Partial flow. This project lasted 20 weeks. Destructive samplings
(1m2 each time) were done weekly. At each sampling plants were
gathered and weighed separately for each vegetative parts. An Area
Meter (Vista) was used to measure root surface and leaf area. Total
shoot and root fresh and dry weight, leaf area index and soil coverage
were evaluated too. Dry weight was achieved in 750c oven after 24
hours. Statgraphic and Harvard Graphic software were used to
formulate and demonstrate the parameters curves due to time. Our
results show that Trifolium repens has affected 60 % and Medicago
sativa 18% by water stress. Onobrychis total fresh weight was
reduced 45%. Dry weight or Biomass in alfalfa is not so affected by
water shortage. This means that in alfalfa fields we can decrease the
irrigation amount and have some how same amount of Biomass.
Onobrychis show a drastic decrease in Biomass. The increases in
total dry matter due to time in studied plants are formulated. For
Trifolium repens if removal or cattle entrance to meadows do not
occurred at perfect time, it will decrease the palatability and water
content of the shoots. Water stress in a short period could develop the
root system in Trifolium repens, but if it last more than this other
ecological and soil factors will affect the growth of this plant. Low
level of soil water is not so important for studied legume forges. But
water shortage affect palatability and water content of aerial parts.
Leaf area due to time in studied legumes is formulated. In fact leaf
area is decreased by shortage in available water. Higher leaf area
means higher forage and biomass production. Medicago and
Onobrychis reach to the maximum leaf area sooner than Trifolium
and are able to produce an optimum soil cover and inhibit the
transpiration of soil water of meadows. Correlation of root surface to
Total biomass in studied plants is formulated. Medicago under water
stress show a 40% decrease in crown cover while at optimum
condition this amount reach to 100%. In order to produce forage in
areas without soil erosion Medicago is the best choice even with a
shortage in water resources. It is tried to represent the growth
simulation of three famous Forage Legumes. By growth simulation
farmers and range managers could better decide to choose best plant
adapted to water availability without designing different time and
labor consuming field experiments.
Abstract: Creative design requires new approaches to assessment
in vocational and technological education. To date, there has been little
discussion on instruments used to evaluate dies produced by students
in vocational and technological education. Developing a generic
instrument has been very difficult due to the diversity of creative
domains, the specificity of content, and the subjectivity involved in
judgment. This paper presents an instrument for measuring the
creativity in the design of products by expanding the Consensual
Assessment Technique (CAT). The content-based scale was evaluated
for content validity by 5 experts. The scale comprises 5 criteria:
originality; practicability; precision; aesthetics; and exchangeability.
Nine experts were invited to evaluate the dies produced by 38 college
students who enrolled in a Product Design and Development course.
To further explore the degree of rater agreement, inter-rater reliability
was calculated for each dimension using Kendall's coefficient of
concordance test. The inter-judge reliability scores achieved
significance, with coefficients ranging from 0.53 to 0.71.