Abstract: This paper deals with modeling and parameter
identification of nonlinear systems described by Hammerstein model
having Piecewise nonlinear characteristics such as Dead-zone
nonlinearity characteristic. The simultaneous use of both an easy
decomposition technique and the triangular basis functions leads to a
particular form of Hammerstein model. The approximation by using
Triangular basis functions for the description of the static nonlinear
block conducts to a linear regressor model, so that least squares
techniques can be used for the parameter estimation. Singular Values
Decomposition (SVD) technique has been applied to separate the
coupled parameters. The proposed approach has been efficiently
tested on academic examples of simulation.
Abstract: Solar power plants(SPPs) have shown a lot of good outcomes
in providing a various functions depending on industrial expectations by
deploying ad-hoc networking with helps of light loaded and battery powered
sensor nodes. In particular, it is strongly requested to develop an algorithm to
deriver the sensing data from the end node of solar power plants to the sink node
on time. In this paper, based on the above observation we have proposed an
IEEE802.15.4 based self routing scheme for solar power plants. The proposed
beacon based priority routing Algorithm (BPRA) scheme utilizes beacon
periods in sending message with embedding the high priority data and thus
provides high quality of service(QoS) in the given criteria. The performance
measures are the packet Throughput, delivery, latency, total energy
consumption. Simulation results under TinyOS Simulator(TOSSIM) have
shown the proposed scheme outcome the conventional Ad hoc On-Demand
Distance Vector(AODV) Routing in solar power plants.
Abstract: In this paper we will develop a sequential life test approach applied to a modified low alloy-high strength steel part used in highway overpasses in Brazil.We will consider two possible underlying sampling distributions: the Normal and theInverse Weibull models. The minimum life will be considered equal to zero. We will use the two underlying models to analyze a fatigue life test situation, comparing the results obtained from both.Since a major chemical component of this low alloy-high strength steel part has been changed, there is little information available about the possible values that the parameters of the corresponding Normal and Inverse Weibull underlying sampling distributions could have. To estimate the shape and the scale parameters of these two sampling models we will use a maximum likelihood approach for censored failure data. We will also develop a truncation mechanism for the Inverse Weibull and Normal models. We will provide rules to truncate a sequential life testing situation making one of the two possible decisions at the moment of truncation; that is, accept or reject the null hypothesis H0. An example will develop the proposed truncated sequential life testing approach for the Inverse Weibull and Normal models.
Abstract: Over the years, there is a growing trend towards
quality-based specifications in highway construction. In many
Quality Control/Quality Assurance (QC/QA) specifications, the
contractor is primarily responsible for quality control of the process,
whereas the highway agency is responsible for testing the acceptance
of the product. A cooperative investigation was conducted in Illinois
over several years to develop a prototype End-Result Specification
(ERS) for asphalt pavement construction. The final characteristics of
the product are stipulated in the ERS and the contractor is given
considerable freedom in achieving those characteristics. The risk for
the contractor or agency depends on how the acceptance limits and
processes are specified. Stochastic simulation models are very useful
in estimating and analyzing payment risk in ERS systems and these
form an integral part of the Illinois-s prototype ERS system. This
paper describes the development of an innovative methodology to
estimate the variability components in in-situ density, air voids and
asphalt content data from ERS projects. The information gained from
this would be crucial in simulating these ERS projects for estimation
and analysis of payment risks associated with asphalt pavement
construction. However, these methods require at least two parties to
conduct tests on all the split samples obtained according to the
sampling scheme prescribed in present ERS implemented in Illinois.
Abstract: A key element of many distribution systems is the
routing and scheduling of vehicles servicing a set of customers. A
wide variety of exact and approximate algorithms have been
proposed for solving the vehicle routing problems (VRP). Exact
algorithms can only solve relatively small problems of VRP, which is
classified as NP-Hard. Several approximate algorithms have proven
successful in finding a feasible solution not necessarily optimum.
Although different parts of the problem are stochastic in nature; yet,
limited work relevant to the application of discrete event system
simulation has addressed the problem. Presented here is optimization
using simulation of VRP; where, a simplified problem has been
developed in the ExtendSimTM simulation environment; where,
ExtendSimTM evolutionary optimizer is used to minimize the total
transportation cost of the problem. Results obtained from the model
are very satisfactory. Further complexities of the problem are
proposed for consideration in the future.
Abstract: Deoxyribonucleic Acid or DNA computing has
emerged as an interdisciplinary field that draws together chemistry,
molecular biology, computer science and mathematics. Thus, in this
paper, the possibility of DNA-based computing to solve an absolute
1-center problem by molecular manipulations is presented. This is
truly the first attempt to solve such a problem by DNA-based
computing approach. Since, part of the procedures involve with
shortest path computation, research works on DNA computing for
shortest path Traveling Salesman Problem, in short, TSP are reviewed.
These approaches are studied and only the appropriate one is adapted
in designing the computation procedures. This DNA-based
computation is designed in such a way that every path is encoded by
oligonucleotides and the path-s length is directly proportional to the
length of oligonucleotides. Using these properties, gel electrophoresis
is performed in order to separate the respective DNA molecules
according to their length. One expectation arise from this paper is that
it is possible to verify the instance absolute 1-center problem using
DNA computing by laboratory experiments.
Abstract: Sonogram images of normal and lymphocyte thyroid tissues have considerable overlap which makes it difficult to interpret and distinguish. Classification from sonogram images of thyroid gland is tackled in semiautomatic way. While making manual diagnosis from images, some relevant information need not to be recognized by human visual system. Quantitative image analysis could be helpful to manual diagnostic process so far done by physician. Two classes are considered: normal tissue and chronic lymphocyte thyroid (Hashimoto's Thyroid). Data structure is analyzed using K-nearest-neighbors classification. This paper is mentioned that unlike the wavelet sub bands' energy, histograms and Haralick features are not appropriate to distinguish between normal tissue and Hashimoto's thyroid.
Abstract: This paper presents a new technique of compensation
of the effect of variation parameters in the direct field oriented
control of induction motor. The proposed method uses an adaptive
tuning of the value of synchronous speed to obtain the robustness for
the field oriented control. We show that this adaptive tuning allows
having robustness for direct field oriented control to changes in rotor
resistance, load torque and rotational speed. The effectiveness of the
proposed control scheme is verified by numerical simulations. The
numerical validation results of the proposed scheme have presented
good performances compared to the usual direct-field oriented
control.
Abstract: This paper describes the development of a fully
automated measurement software for antenna radiation pattern
measurements in a Compact Antenna Test Range (CATR). The
CATR has a frequency range from 2-40 GHz and the measurement
hardware includes a Network Analyzer for transmitting and
Receiving the microwave signal and a Positioner controller to control
the motion of the Styrofoam column. The measurement process
includes Calibration of CATR with a Standard Gain Horn (SGH)
antenna followed by Gain versus angle measurement of the Antenna
under test (AUT). The software is designed to control a variety of
microwave transmitter / receiver and two axis Positioner controllers
through the standard General Purpose interface bus (GPIB) interface.
Addition of new Network Analyzers is supported through a slight
modification of hardware control module. Time-domain gating is
implemented to remove the unwanted signals and get the isolated
response of AUT. The gated response of the AUT is compared with
the calibration data in the frequency domain to obtain the desired
results. The data acquisition and processing is implemented in
Agilent VEE and Matlab. A variety of experimental measurements
with SGH antennas were performed to validate the accuracy of
software. A comparison of results with existing commercial
softwares is presented and the measured results are found to be
within .2 dBm.
Abstract: An acoustic emission (AE) technique is useful for
detection of partial discharges (PDs) at a joint and a terminal section of
a cross-linked polyethylene (XLPE) cable. For AE technique, it is not
difficult to detect a PD using AE sensors. However, it is difficult to
grasp whether the detected AE signal is owing to a single discharge or
not. Additionally, when an AE technique is applied at a terminal
section of a XLPE cable in salt pollution district, for example, there is
possibility of detection of AE signals owing to creeping discharges on
the surface of electric power apparatus. In this study, we evaluated AE
signals in order to grasp what kind of information we can get from
detected AE signals. The results showed that envelop detection of AE
signal and a period which some AE signals were continuously detected
were good indexes for estimating state-of-discharge.
Abstract: This paper presents a new Hybrid Fuzzy (HF) PID type controller based on Genetic Algorithms (GA-s) for solution of the Automatic generation Control (AGC) problem in a deregulated electricity environment. In order for a fuzzy rule based control system to perform well, the fuzzy sets must be carefully designed. A major problem plaguing the effective use of this method is the difficulty of accurately constructing the membership functions, because it is a computationally expensive combinatorial optimization problem. On the other hand, GAs is a technique that emulates biological evolutionary theories to solve complex optimization problems by using directed random searches to derive a set of optimal solutions. For this reason, the membership functions are tuned automatically using a modified GA-s based on the hill climbing method. The motivation for using the modified GA-s is to reduce fuzzy system effort and take large parametric uncertainties into account. The global optimum value is guaranteed using the proposed method and the speed of the algorithm-s convergence is extremely improved, too. This newly developed control strategy combines the advantage of GA-s and fuzzy system control techniques and leads to a flexible controller with simple stricture that is easy to implement. The proposed GA based HF (GAHF) controller is tested on a threearea deregulated power system under different operating conditions and contract variations. The results of the proposed GAHF controller are compared with those of Multi Stage Fuzzy (MSF) controller, robust mixed H2/H∞ and classical PID controllers through some performance indices to illustrate its robust performance for a wide range of system parameters and load changes.
Abstract: This paper is focusing on designing a control system
for wind turbine which can control the speed and output power
according to arbitrary algorithm. Reference Tracking Method is used
to control the turbine spinning speed in order to increase its output
energy.
Abstract: In this work we present a solution for DAGC (Digital
Automatic Gain Control) in WLAN receivers compatible to IEEE 802.11a/g standard. Those standards define communication in 5/2.4
GHz band using Orthogonal Frequency Division Multiplexing OFDM modulation scheme. WLAN Transceiver that we have used
enables gain control over Low Noise Amplifier (LNA) and a
Variable Gain Amplifier (VGA). The control over those signals is
performed in our digital baseband processor using dedicated hardware block DAGC. DAGC in this process is used to automatically control the VGA and LNA in order to achieve better
signal-to-noise ratio, decrease FER (Frame Error Rate) and hold the
average power of the baseband signal close to the desired set point.
DAGC function in baseband processor is done in few steps: measuring power levels of baseband samples of an RF signal,accumulating the differences between the measured power level and
actual gain setting, adjusting a gain factor of the accumulation, and
applying the adjusted gain factor the baseband values. Based on the measurement results of RSSI signal dependence to input power we have concluded that this digital AGC can be implemented applying
the simple linearization of the RSSI. This solution is very simple but also effective and reduces complexity and power consumption of the
DAGC. This DAGC is implemented and tested both in FPGA and in ASIC as a part of our WLAN baseband processor. Finally, we have integrated this circuit in a compact WLAN PCMCIA board based on MAC and baseband ASIC chips designed from us.
Abstract: This study aims to investigate empirically the valuerelevance
of accounting information to domestic investors in Tehran
stock exchange from 1999 to 2006. During the present research
impacts of two factors, including positive vs. negative earnings and
the firm size are considered as well. The authors used earnings per
share and annual change of earnings per share as the income
statement indices, and book value of equity per share as the balance
sheet index. Return and Price models through regression analysis are
deployed in order to test the research hypothesis. Results depicted
that accounting information is value-relevance to domestic investors
in Tehran Stock Exchange according to both studied models.
However, income statement information has more value-relevance
than the balance sheet information. Furthermore, positive vs. negative
earnings and firm size seems to have significant impact on valuerelevance
of accounting information.
Abstract: Flow field around hypersonic vehicles is very
complex and difficult to simulate. The boundary layers are squeezed
between shock layer and body surface. Resolution of boundary layer,
shock wave and turbulent regions where the flow field has high
values is difficult of capture. Detached eddy simulation (DES) is a
modification of a RANS model in which the model switches to a
subgrid scale formulation in regions fine enough for LES
calculations. Regions near solid body boundaries and where the
turbulent length scale is less than the maximum grid dimension are
assigned the RANS mode of solution. As the turbulent length scale
exceeds the grid dimension, the regions are solved using the LES
mode. Therefore the grid resolution is not as demanding as pure LES,
thereby considerably cutting down the cost of the computation. In
this research study hypersonic flow is simulated at Mach 8 and
different angle of attacks to resolve the proper boundary layers and
discontinuities. The flow is also simulated in the long wake regions.
Mesh is little different than RANS simulations and it is made dense
near the boundary layers and in the wake regions to resolve it
properly. Hypersonic blunt cone cylinder body with frustrum at angle
5o and 10 o are simulated and there aerodynamics study is performed
to calculate aerodynamics characteristics of different geometries. The
results and then compared with experimental as well as with some
turbulence model (SA Model). The results achieved with DES
simulation have very good resolution as well as have excellent
agreement with experimental and available data. Unsteady
simulations are performed for DES calculations by using duel time
stepping method or implicit time stepping. The simulations are
performed at Mach number 8 and angle of attack from 0o to 10o for
all these cases. The results and resolutions for DES model found
much better than SA turbulence model.
Abstract: Recently, business environment and customer needs
have become rapidly changing, hence it is very difficult to fulfill
sophisticated customer needs by product or service innovation only. In
practice, to cope with this problem, various manufacturing companies
have developed services to combine with their products. Along with
this, many academic studies on PSS (Product Service System) which is
the integrated system of products and services have been conducted
from the viewpoint of manufacturers. On the other hand, service
providers are also attempting to develop service-supporting products
to increase their service competitiveness and provide differentiated
value. However, there is a lack of research based on the service-centric
point of view. Accordingly, this paper proposes a concept generation
method for service-supporting product development from the
service-centric point of view. This method is designed to be executed
in five consecutive steps: situation analysis, problem definition,
problem resolution, solution evaluation, and concept generation. In
the proposed approach, some tools of TRIZ (Theory of Solving
Inventive Problem) such as ISQ (Innovative Situation Questionnaire)
and 40 inventive principles are employed in order to define problems
of the current services and solve them by generating
service-supporting product concepts. This research contributes to the
development of service-supporting products and service-centric PSSs.
Abstract: Single photon detectors have been fabricated NbN
nano wire. These detectors are fabricated from high quality, ultra
high vacuum sputtered NbN thin films on a sapphire substrate. In this
work a typical schematic of the nanowire Single Photon Detector
structure and then driving and measurement electronic circuit are
shown.
The response of superconducting nanowire single photon detectors
during a photo detection event, is modeled by a special electrical
circuits (two circuit).
Finally, current through the wire is calculated by solving
equations of models.
Abstract: This research was aimed to develop and determine the
quality of online learning activities kit as well as to examine the
learning achievement of students and their satisfaction towards the kit
through authentic assessment. The tools in this research contained
online learning activities kit on plant in Thai literature in compliance
with the School Botanical Garden of Plant Genetic Conservation
Project under the Royal Initiative of Her Royal Highness Princess
Maha Chakri Sirindhorn, the assessment form, the learning
achievement test, the satisfaction form and the authentic assessment
form. The population consisted of 40 students in the second range of
primary years (Prathomsuksa 4 to 6) at Ban Khao Rak School,
Suratthani Province, Thailand. The research results showed that the
content quality of the developed online learning activities kit as
assessed by the experts was 4.70 on average or at very high level.
The pre-test and post-test comparison was made to examine the
learning achievement and it revealed that the post-test score was
higher than the pre-test score with statistical significance at the .01
level. The satisfaction of the sampling group towards the online
learning activities kit was 4.74 or at the highest level. The authentic
assessment showed an average of 1.69 or at good level. Therefore,
the online learning activities kit on plant in Thai literature in
compliance with the School Botanical Garden of Plant Genetic
Conservation Project under the Royal Initiative of Her Royal
Highness Princess Maha Chakri Sirindhorn could be used in real
classroom situations.
Abstract: Abovepresented work deals with the new scope of application of information and communication technologies for the improvement of the election process in the biased environment. We are introducing a new concept of construction of the information-communication system for the election participant. It consists of four main components: Software, Physical Infrastructure, Structured Information and the Trained Stuff. The Structured Information is the bases of the whole system and is the collection of all possible events (irregularities among them) at the polling stations, which are structured in special templates, forms and integrated in mobile devices.The software represents a package of analytic modules, which operates with the dynamic database. The application of modern communication technologies facilities the immediate exchange of information and of relevant documents between the polling stations and the Server of the participant. No less important is the training of the staff for the proper functioning of the system. The e-training system with various modules should be applied in this respect. The presented methodology is primarily focused on the election processes in the countries of emerging democracies.It can be regarded as the tool for the monitoring of elections process by the political organization(s) and as one of the instruments to foster the spread of democracy in these countries.
Abstract: Super-resolution is nowadays used for a high-resolution
image produced from several low-resolution noisy frames. In
this work, we consider the problem of high-quality interpolation of a
single noise-free image. Such images may come from different sources,
i.e., they may be frames of videos, individual pictures, etc. On
the other hand, in the encoder we apply a downsampling via
bidimen-sional interpolation of each frame, and in the decoder we
apply a upsampling by which we restore the original size of the
image. If the compression ratio is very high, then we use a
convolutive mask that restores the edges, eliminating the blur.
Finally, both, the encoder and the complete decoder are implemented
on General-Purpose computation on Graphics Processing Units
(GPGPU) cards. In fact, the mentioned mask is coded inside texture
memory of a GPGPU.