Abstract: In this paper, a class of impulsive BAM fuzzy cellular neural networks with time delays in the leakage terms is formulated and investigated. By establishing a delay differential inequality and M-matrix theory, some sufficient conditions ensuring the existence, uniqueness and global exponential stability of equilibrium point for impulsive BAM fuzzy cellular neural networks with time delays in the leakage terms are obtained. In particular, a precise estimate of the exponential convergence rate is also provided, which depends on system parameters and impulsive perturbation intention. It is believed that these results are significant and useful for the design and applications of BAM fuzzy cellular neural networks. An example is given to show the effectiveness of the results obtained here.
Abstract: A serious problem on the WWW is finding reliable
information. Not everything found on the Web is true and the
Semantic Web does not change that in any way. The problem will be
even more crucial for the Semantic Web, where agents will be
integrating and using information from multiple sources. Thus, if an
incorrect premise is used due to a single faulty source, then any
conclusions drawn may be in error. Thus, statements published on
the Semantic Web have to be seen as claims rather than as facts, and
there should be a way to decide which among many possibly
inconsistent sources is most reliable. In this work, we propose a trust
model for the Semantic Web. The proposed model is inspired by the
use trust in human society. Trust is a type of social knowledge and
encodes evaluations about which agents can be taken as reliable
sources of information or services. Our proposed model allows
agents to decide which among different sources of information to
trust and thus act rationally on the semantic web.
Abstract: Charge Simulation Method (CSM) is one of the very widely used numerical field computation technique in High Voltage (HV) engineering. The high voltage fields of varying non uniformities are encountered in practice. CSM programs being case specific, the simulation accuracies heavily depend on the user (programmers) experience. Here is an effort to understand CSM errors and evolve some guidelines to setup accurate CSM models, relating non uniformities with assignment factors. The results are for the six-point-charge model of sphere-plane gap geometry. Using genetic algorithm (GA) as tool, optimum assignment factors at different non uniformity factors for this model have been evaluated and analyzed. It is shown that the symmetrically placed six-point-charge models can be good enough to set up CSM programs with potential errors less than 0.1% when the field non uniformity factor is greater than 2.64 (field utilization factor less than 52.76%).
Abstract: This research was aimed to develop and determine the
quality of online learning activities kit as well as to examine the
learning achievement of students and their satisfaction towards the kit
through authentic assessment. The tools in this research contained
online learning activities kit on plant in Thai literature in compliance
with the School Botanical Garden of Plant Genetic Conservation
Project under the Royal Initiative of Her Royal Highness Princess
Maha Chakri Sirindhorn, the assessment form, the learning
achievement test, the satisfaction form and the authentic assessment
form. The population consisted of 40 students in the second range of
primary years (Prathomsuksa 4 to 6) at Ban Khao Rak School,
Suratthani Province, Thailand. The research results showed that the
content quality of the developed online learning activities kit as
assessed by the experts was 4.70 on average or at very high level.
The pre-test and post-test comparison was made to examine the
learning achievement and it revealed that the post-test score was
higher than the pre-test score with statistical significance at the .01
level. The satisfaction of the sampling group towards the online
learning activities kit was 4.74 or at the highest level. The authentic
assessment showed an average of 1.69 or at good level. Therefore,
the online learning activities kit on plant in Thai literature in
compliance with the School Botanical Garden of Plant Genetic
Conservation Project under the Royal Initiative of Her Royal
Highness Princess Maha Chakri Sirindhorn could be used in real
classroom situations.
Abstract: Abovepresented work deals with the new scope of application of information and communication technologies for the improvement of the election process in the biased environment. We are introducing a new concept of construction of the information-communication system for the election participant. It consists of four main components: Software, Physical Infrastructure, Structured Information and the Trained Stuff. The Structured Information is the bases of the whole system and is the collection of all possible events (irregularities among them) at the polling stations, which are structured in special templates, forms and integrated in mobile devices.The software represents a package of analytic modules, which operates with the dynamic database. The application of modern communication technologies facilities the immediate exchange of information and of relevant documents between the polling stations and the Server of the participant. No less important is the training of the staff for the proper functioning of the system. The e-training system with various modules should be applied in this respect. The presented methodology is primarily focused on the election processes in the countries of emerging democracies.It can be regarded as the tool for the monitoring of elections process by the political organization(s) and as one of the instruments to foster the spread of democracy in these countries.
Abstract: This paper presents a simple method for estimation of
additional load as a factor of the existing load that may be drawn
before reaching the point of line maximum loadability of radial
distribution system (RDS) with different realistic load models at
different substation voltages. The proposed method involves a simple
line loadability index (LLI) that gives a measure of the proximity of
the present state of a line in the distribution system. The LLI can use
to assess voltage instability and the line loading margin. The
proposed method also compares with the existing method of
maximum loadability index [10]. The simulation results show that the
LLI can identify not only the weakest line/branch causing system
instability but also the system voltage collapse point when it is near
one. This feature enables us to set an index threshold to monitor and
predict system stability on-line so that a proper action can be taken to
prevent the system from collapse. To demonstrate the validity of the
proposed algorithm, computer simulations are carried out on two bus
and 69 bus RDS.
Abstract: The integration between technology of remote
sensing, information from the data of digital image, and modeling
technology for the simulation of water quality will provide easiness
during the observation on the quality of water changes on the river
surface. For example, Ciliwung River which is contaminated with
non-point source pollutant from household wastes, particularly on its
downstream. This fact informed that the quality of water in this river
is getting worse. The land use for settlements and housing ranges
between 62.84% - 81.26% on the downstream of Ciliwung River,
give a significant picture in seeing factors that affected the water
quality of Ciliwung River.
Abstract: This paper presents design, analysis and comparison of the different rotor type permanent magnet machines. The presented machines are designed as having same geometrical dimensions and same materials for comparison. The main machine parameters of interior and exterior rotor type machines including eddy current effect, torque-speed characteristics and magnetic analysis are investigated using MAXWELL program. With this program, the components of the permanent magnet machines can be calculated with high accuracy. Six types of Permanent machines are compared with respect to their topology, size, magnetic field, air gap flux, voltage, torque, loss and efficiency. The analysis results demonstrate the effectiveness of the proposed machines design methodology. We believe that, this study will be a helpful resource in terms of examination and comparison of the basic structure and magnetic features of the PM (Permanent magnet) machines which have different rotor structure.
Abstract: In this paper a Public Key Cryptosystem is proposed
using the number theoretic transforms (NTT) over a ring of integer
modulo a composite number. The key agreement is similar to
ElGamal public key algorithm. The security of the system is based on
solution of multivariate linear congruence equations and discrete
logarithm problem. In the proposed cryptosystem only fixed numbers
of multiplications are carried out (constant complexity) and hence the
encryption and decryption can be done easily. At the same time, it is
very difficult to attack the cryptosystem, since the cipher text is a
sequence of integers which are interrelated. The system provides
authentication also. Using Mathematica version 5.0 the proposed
algorithm is justified with a numerical example.
Abstract: An image compression method has been developed
using fuzzy edge image utilizing the basic Block Truncation Coding
(BTC) algorithm. The fuzzy edge image has been validated with
classical edge detectors on the basis of the results of the well-known
Canny edge detector prior to applying to the proposed method. The
bit plane generated by the conventional BTC method is replaced with
the fuzzy bit plane generated by the logical OR operation between
the fuzzy edge image and the corresponding conventional BTC bit
plane. The input image is encoded with the block mean and standard
deviation and the fuzzy bit plane. The proposed method has been
tested with test images of 8 bits/pixel and size 512×512 and found to
be superior with better Peak Signal to Noise Ratio (PSNR) when
compared to the conventional BTC, and adaptive bit plane selection
BTC (ABTC) methods. The raggedness and jagged appearance, and
the ringing artifacts at sharp edges are greatly reduced in
reconstructed images by the proposed method with the fuzzy bit
plane.
Abstract: Recognition of Indian languages scripts is challenging problems. In Optical Character Recognition [OCR], a character or symbol to be recognized can be machine printed or handwritten characters/numerals. There are several approaches that deal with problem of recognition of numerals/character depending on the type of feature extracted and different way of extracting them. This paper proposes a recognition scheme for handwritten Hindi (devnagiri) numerals; most admired one in Indian subcontinent. Our work focused on a technique in feature extraction i.e. global based approach using end-points information, which is extracted from images of isolated numerals. These feature vectors are fed to neuro-memetic model [18] that has been trained to recognize a Hindi numeral. The archetype of system has been tested on varieties of image of numerals. . In proposed scheme data sets are fed to neuro-memetic algorithm, which identifies the rule with highest fitness value of nearly 100 % & template associates with this rule is nothing but identified numerals. Experimentation result shows that recognition rate is 92-97 % compared to other models.
Abstract: Most of the Question Answering systems
composed of three main modules: question processing,
document processing and answer processing. Question
processing module plays an important role in QA systems. If
this module doesn't work properly, it will make problems for
other sections. Moreover answer processing module is an
emerging topic in Question Answering, where these systems
are often required to rank and validate candidate answers.
These techniques aiming at finding short and precise answers
are often based on the semantic classification.
This paper discussed about a new model for question
answering which improved two main modules, question
processing and answer processing.
There are two important components which are the bases
of the question processing. First component is question
classification that specifies types of question and answer.
Second one is reformulation which converts the user's
question into an understandable question by QA system in a
specific domain. Answer processing module, consists of
candidate answer filtering, candidate answer ordering
components and also it has a validation section for interacting
with user. This module makes it more suitable to find exact
answer. In this paper we have described question and answer
processing modules with modeling, implementing and
evaluating the system. System implemented in two versions.
Results show that 'Version No.1' gave correct answer to 70%
of questions (30 correct answers to 50 asked questions) and
'version No.2' gave correct answers to 94% of questions (47
correct answers to 50 asked questions).
Abstract: In this study, the effect of mechanical activation on the synthesis of Fe3Al/Al2O3 nanocomposite has been investigated by using mechanochemical method. For this purpose, Aluminum powder and hematite as precursors, with stoichiometric ratio, have been utilized and other effective parameters in milling process were kept constant. Phase formation analysis, crystallite size measurement and lattice strain were studied by X-ray diffraction (XRD) by using Williamson-Hall method as well as microstructure and morphology were explored by Scanning electron microscopy (SEM). Also, Energy-dispersive X-ray spectroscopy (EDX) analysis was used in order to probe the particle distribution. The results showed that after 30-hour milling, the reaction was started, combustibly done and completed.
Abstract: Calcite aCalcite and aragonite are the two common
polymorphs of CaCO3 observed as biominerals. It is universal that
the sea water contents a high Mg2+ (50mM) relative to Ca2+ (10mM).
In vivo crystallization, Mg2+ inhibits calcite formation. For this
reason, stony corals skeleton may be formed only aragonite crystals
in the biocalcification. It is special in case of soft corals of which
formed only calcite crystal; however, this interesting phenomenon,
still uncharacterized in the marine environment, has been explored in
this study using newly purified cell-free proteins isolated from the
endoskeletal sclerites of soft coral. By recording the decline of pH in
vitro, the control of CaCO3 nucleation and crystal growth by the cellfree
proteins was revealed. Using Atomic Force Microscope, here we
find that these endoskeletal cell-free proteins significantly design the
morphological shape in the molecular-scale kinetics of crystal
formation and those proteins act as surfactants to promote ion
attachment at calcite steps.nd aragonite are the two common polymorphs of CaCO3 observed as biominerals. It is universal that the sea water contents a high Mg2+ (50mM) relative to Ca2+ (10mM). In vivo crystallization, Mg2+ inhibits calcite formation. For this reason, stony corals skeleton may be formed only aragonite crystals in the biocalcification. It is special in case of soft corals of which formed only calcite crystal; however, this interesting phenomenon, still uncharacterized in the marine environment, has been explored in this study using newly purified cell-free proteins isolated from the endoskeletal sclerites of soft coral. By recording the decline of pH in vitro, the control of CaCO3 nucleation and crystal growth by the cell-free proteins was revealed. Using Atomic Force Microscope, here we find that these endoskeletal cell-free proteins significantly design the morphological shape in the molecular-scale kinetics of crystal formation and those proteins act as surfactants to promote ion attachment at calcite steps. KeywordsBiomineralization, Calcite, Cell-free protein, Soft coral
Abstract: International trade involves both large and small firms
engaged in business overseas. Possible drivers that force companies
to enter international markets include increasing competition at the
domestic market, maturing domestic markets, and limited domestic
market opportunities. Technology is an important driving factor in
shaping international marketing strategy as well as in driving force
towards a more global marketplace, especially technology in
communication. It includes telephones, the internet, computer
systems and e-mail. There are three main marketing strategy choices,
namely standardization approach, adaptation approach and middleof-
the-road approach that companies implement to overseas markets.
The decision depends on situations and factors facing the companies
in the international markets. In this paper, the contingency concept is
considered that no single strategy can be effective in all contexts.
The effect of strategy on performance depends on specific situational
variables. Strategic fit is employed to investigate export marketing
strategy adaptation under certain environmental conditions, which in
turn can lead to superior performance.
Abstract: Water level forecasting using records of past time series is of importance in water resources engineering and management. For example, water level affects groundwater tables in low-lying coastal areas, as well as hydrological regimes of some coastal rivers. Then, a reliable prediction of sea-level variations is required in coastal engineering and hydrologic studies. During the past two decades, the approaches based on the Genetic Programming (GP) and Artificial Neural Networks (ANN) were developed. In the present study, the GP is used to forecast daily water level variations for a set of time intervals using observed water levels. The measurements from a single tide gauge at Urmia Lake, Northwest Iran, were used to train and validate the GP approach for the period from January 1997 to July 2008. Statistics, the root mean square error and correlation coefficient, are used to verify model by comparing with a corresponding outputs from Artificial Neural Network model. The results show that both these artificial intelligence methodologies are satisfactory and can be considered as alternatives to the conventional harmonic analysis.
Abstract: The structural interpretation of a part of eastern Potwar
(Missa Keswal) has been carried out with available seismological,
seismic and well data. Seismological data contains both the source
parameters and fault plane solution (FPS) parameters and seismic data
contains ten seismic lines that were re-interpreted by using well data.
Structural interpretation depicts two broad types of fault sets namely,
thrust and back thrust faults. These faults together give rise to pop up
structures in the study area and also responsible for many structural
traps and seismicity. Seismic interpretation includes time and depth
contour maps of Chorgali Formation while seismological interpretation
includes focal mechanism solution (FMS), depth, frequency,
magnitude bar graphs and renewal of Seismotectonic map. The Focal
Mechanism Solutions (FMS) that surrounds the study area are
correlated with the different geological and structural maps of the area
for the determination of the nature of subsurface faults. Results of
structural interpretation from both seismic and seismological data
show good correlation. It is hoped that the present work will help in
better understanding of the variations in the subsurface structure and
can be a useful tool for earthquake prediction, planning of oil field and
reservoir monitoring.
Abstract: In this paper, we study the pulsatile flow of blood through stenotic arteries. The inner layer of arterial walls is modeled as a porous medium and human blood is assumed as an incompressible fluid. A numerical algorithm based on the finite element method is developed to simulate the blood flow through both the lumen region and the porous wall. The algorithm is then applied to study the flow behaviour and to investigate the significance of the non-Newtonian effect.
Abstract: The importance of supply chain and logistics
management has been widely recognised. Effective management of
the supply chain can reduce costs and lead times and improve
responsiveness to changing customer demands. This paper proposes a
multi-matrix real-coded Generic Algorithm (MRGA) based
optimisation tool that minimises total costs associated within supply
chain logistics. According to finite capacity constraints of all parties
within the chain, Genetic Algorithm (GA) often produces infeasible
chromosomes during initialisation and evolution processes. In the
proposed algorithm, chromosome initialisation procedure, crossover
and mutation operations that always guarantee feasible solutions
were embedded. The proposed algorithm was tested using three sizes
of benchmarking dataset of logistic chain network, which are typical
of those faced by most global manufacturing companies. A half
fractional factorial design was carried out to investigate the influence
of alternative crossover and mutation operators by varying GA
parameters. The analysis of experimental results suggested that the
quality of solutions obtained is sensitive to the ways in which the
genetic parameters and operators are set.
Abstract: The paper describes a knowledge based system for
analysis of microscopic wear particles. Wear particles contained in
lubricating oil carry important information concerning machine
condition, in particular the state of wear. Experts (Tribologists) in the
field extract this information to monitor the operation of the machine
and ensure safety, efficiency, quality, productivity, and economy of
operation. This procedure is not always objective and it can also be
expensive. The aim is to classify these particles according to their
morphological attributes of size, shape, edge detail, thickness ratio,
color, and texture, and by using this classification thereby predict
wear failure modes in engines and other machinery. The attribute
knowledge links human expertise to the devised Knowledge Based
Wear Particle Analysis System (KBWPAS). The system provides an
automated and systematic approach to wear particle identification
which is linked directly to wear processes and modes that occur in
machinery. This brings consistency in wear judgment prediction
which leads to standardization and also less dependence on
Tribologists.