Abstract: Transportation of long turbine blades from one place
to another is a difficult process. Hence a feasibility study of
modularization of wind turbine blade was taken from structural
standpoint through finite element analysis. Initially, a non-segmented
blade is modeled and its structural behavior is evaluated to serve as
reference. The resonant, static bending and fatigue tests are simulated
in accordance with IEC61400-23 standard for comparison purpose.
The non-segmented test blade is separated at suitable location based
on trade off studies and the segments are joined with an innovative
double strap bonded joint configuration. The adhesive joint is
modeled by adopting cohesive zone modeling approach in ANSYS.
The developed blade model is analyzed for its structural response
through simulation. Performances of both the blades are found to be
similar, which indicates that, efficient segmentation of the long blade
is possible which facilitates easy transportation of the blades and on
site reassembling. The location selected for segmentation and
adopted joint configuration has resulted in an efficient segmented
blade model which proves the methodology adopted for segmentation
was quite effective. The developed segmented blade appears to be the
viable alternative considering its structural response specifically in
fatigue within considered assumptions.
Abstract: The area of liberty, security and justice within the
European Union is still a work in progress. No one can deny that the
EU struggles between a monistic and a dualist approach.
The aim of our essay is to first review how the European law is
perceived by the rest of the international scene. It will then discuss
two main mechanisms at play: the interpretation of larger
international treaties and the penal mechanisms of European law.
Finally, it will help us understand the role of a penal Europe on the
international scene with concrete examples.
Special attention will be paid to cases that deal with fundamental
rights as they represent an interesting case study in Europe and in the
rest of the World. It could illustrate the aforementioned duality
currently present in the Union’s interpretation of international public
law. On the other hand, it will explore some specific European penal
mechanism through mutual recognition and the European arrest
warrant in the transnational criminality frame.
Concerning the interpretation of the treaties, it will first, underline
the ambiguity and the general nature of some treaties that leave the
EU exposed to tension and misunderstanding then it will review the
validity of an EU act (whether or not it is compatible with the rules of
International law).
Finally, it will focus on the most complete manifestation of liberty,
security and justice through the principle of mutual recognition. Used
initially in commercial matters, it has become “the cornerstone” of
European construction. It will see how it is applied in judicial
decisions (its main event and achieving success is via the European
arrest warrant) and how European member states have managed to
develop this cooperation.
Abstract: This paper presents a numerical investigation of two
horizontally mounted four-lobed swirl pipes in terms of swirl
induction effectiveness into flows passing through them. The swirl
flows induced by the two swirl pipes have the potential to improve
the efficiency of Clean-In-Place procedures in a closed processing
system by local intensification of hydrodynamic impact on the
internal pipe surface. Pressure losses, swirl development within the
two swirl pipe, swirl induction effectiveness, swirl decay and wall
shear stress variation downstream of two swirl pipes are analyzed and
compared. It was found that a shorter length of swirl inducing pipe
used in joint with transition pipes is more effective in swirl induction
than when a longer one is used, in that it has a less constraint to the
induced swirl and results in slightly higher swirl intensity just
downstream of it with the expense of a smaller pressure loss. The
wall shear stress downstream of the shorter swirl pipe is also slightly
larger than that downstream of the longer swirl pipe due to the
slightly higher swirl intensity induced by the shorter swirl pipe. The
advantage of the shorter swirl pipe in terms of swirl induction is more
significant in flows with a larger Reynolds Number.
Abstract: Aim of this work is to determine the theoretical and
experimental properties of filament wound glass fiber/epoxy resin
composite pipes with different winding design subjected under
bending. For determination of bending strength of composite samples
three point bending tests were conducted. Good correlation between
theoretical and experimental results has been obtained, where sample
No4 has shown the highest value of bending strength. All samples
have demonstrated matrix cracking and fiber failure followed by
layers delamination during testing. Also, it was found that smaller
winding angles lead to an increase in bending stress. From presented
results good merger between glass fibers and epoxy resin was
confirmed by SEM analysis.
Abstract: In this study, firstly democratic thoughts which
directly or indirectly affect economic development and/or the
interaction between authoritarian regimes and the economic
development and the direction and channels of this interaction were
studied and then the study tried to determine how democracy affects
economic development. It was concluded that the positive
contributions of democracy to economic development were more
determinant than the effects that were either negative or restrictive in
terms of development. When compared to autocracy, since
democracy is more successful in managing social conflicts, ensuring
political stability and preventing social disasters such as famine, it
contributes more to economic development. Democracy also
facilitates delegation of authority, provides a stable investment
environment and accelerates mobilization of resources in accordance
with economic growth/development. Democracy leads to an increase
in human capital accumulation and increases the growth rate through
reducing income inequality. It can be said that democratic regimes
are the most appropriate ones in terms of increasing economic
performance and supporting economic development through their
strong institutional structures and the assurance they will ensure in
property rights.
Abstract: Non-crimp 3D orthogonal fabric composite is one of
the textile-based composite materials that are rapidly developing
light-weight engineering materials. The present paper focuses on
geometric and micromechanical modeling of non-crimp 3D
orthogonal carbon fabric and composites reinforced with it for
aerospace applications. In this research meso-finite element (FE)
modeling employs for stress analysis in different load conditions.
Since mechanical testing of expensive textile carbon composites with
specific application isn't affordable, simulation composite in a virtual
environment is a helpful way to investigate its mechanical properties
in different conditions.
Abstract: Background: Worldwide, at least 2.8 million people
die each year as a result of being overweight or obese, and 35.8
million (2.3%) of global DALYs are caused by overweight or
obesity. Obesity is acknowledged as one of the burning public
health problems reducing life expectancy and quality of life. The
body composition analysis of the university population is essential
in assessing the nutritional status, as well as the risk of developing
diseases associated with abnormal body fat content so as to make
nutritional recommendations. Objectives: The main aim was to
determine the prevalence of obesity and overweight in University
students using Anthropometric analysis and BIA methods. Material
and Methods: In this cross-sectional study, 283 university students
participated. The body composition analysis was undertaken by
using mainly: i) Anthropometric Measurement: Height, Weight,
BMI, waist circumference, hip circumference and skin fold
thickness, ii) Bio-electrical impedance was used for analysis of
body fat mass, fat percent and visceral fat which was measured by
Tanita SC-330P Professional Body Composition Analyzer. The
data so collected were compiled in MS Excel and analyzed for
males and females using SPSS 16. Results and Discussion: The
mean age of the male (n= 153) studied subjects was 25.37 ±2.39
years and females (n=130) was 22.53 ±2.31. The data of BIA
revealed very high mean fat per cent of the female subjects i.e.
30.3±6.5 per cent whereas mean fat per cent of the male subjects
was 15.60±6.02 per cent indicating a normal body fat range. The
findings showed high visceral fat of both males (12.92±3.02) and
females (16.86±4.98). BMI, BF% and WHR were higher among
females, and BMI was higher among males. The most evident
correlation was verified between BF% and WHR for female
students (r=0.902; p
Abstract: A new steganographic method via the use of numeric
data on public websites with a self-authentication capability is
proposed. The proposed technique transforms a secret message into
partial shares by Shamir’s (k, n)-threshold secret sharing scheme with
n = k + 1. The generated k+1 partial shares then are embedded into the
numeric items to be disguised as part of the website’s numeric content,
yielding the stego numeric content. Afterward, a receiver links to the
website and extracts every k shares among the k+1 ones from the stego
numeric content to compute k+1 copies of the secret, and the
phenomenon of value consistency of the computed k+1 copies is taken
as an evidence to determine whether the extracted message is authentic
or not, attaining the goal of self-authentication of the extracted secret
message. Experimental results and discussions are provided to show
the feasibility and effectiveness of the proposed method.
Abstract: Family is a basic unit of the society and the main
source of human development. The initial aim of the family is
psychological and social support of its members and has special
developmental stages. Researches show the families who have less
cohesion, have more conflicts and maladjustments and the members
of such families are not able to communicate effectively. Family is a
system in which any inter communication is related to child rearing
patterns and can affect it. Even the child rearing styles in childhood
can determine the family communications in adulthood. Therefore,
the aim of the present research was to examine the relationship
between child-rearing styles including authoritative, authoritarian and
permissive with dimensions of family communication patterns
including the conversation and conformity. The research design was a
correlational and the population consisted of the psychology students
of Roudehen Islamic Azad University who were studying in
academic year 2013-2014. A sample of 324 students was selected
randomly from the population. The research tools were the Baumrind
Child-rearing Questionnaires and Family Communication
Patterns Inventory, The Revised Scale of Koerner and Fitzpatrick.
The result was as below: (a) there was a positive and significant
relationship between conversation orientation and authoritative style.
(b) There was no significant relationship between conversation
orientation and other child-rearing styles. (c) There was a negative
significant relationship between conformity orientation and
authoritative style. (d) There was a positive significant relationship
between conformity orientation with authoritarian and permissive
styles. (e) There was a significant relationship between 3 dimensions
of child-rearing and communication patterns.
Abstract: The US Consumer Price Indices (CPIs) measures
hundreds of items in the US economy. Many social programs
and government benefits index to the CPIs. The purpose of
this project is to modernize an existing process. This paper will
show the development of a small, visual, software product that
documents the Economic Price Adjustment (EPA) for longterm
contracts. The existing workbook does not provide the
flexibility to calculate EPAs where the base-month and the
option-month are different. Nor does the workbook provide
automated error checking. The small, visual, software product
provides the additional flexibility and error checking. This
paper presents the feedback to project.
Abstract: Experimental studies to investigate the depth of the
scour conducted at a side-weir intersection located at the 1800 curved
flume which located Hydraulic Laboratory of Yıldız Technical
University, Istanbul, Turkey. Side weirs were located at the middle of
the straight part of the main channel. Three different lengths (25, 40
and 50 cm) and three different weir crest height (7, 10 and 12 cm) of
the side weir placed on the side weir station. There is no scour when
the material is only kaolin. Therefore, the cohesive bed was prepared
by properly mixing clay material (kaolin) with 31% sand in all
experiments. Following 24h consolidation time, in order to observe
the effect of flow intensity on the scour depth, experiments were
carried out for five different upstream Froude numbers in the range of
0.33-0.81.
As a result of this study the relation between scour depth and
upstream flow intensity as a function of time have been established.
The longitudinal velocities decreased along the side weir; towards the
downstream due to overflow over the side-weirs. At the beginning,
the scour depth increases rapidly with time and then asymptotically
approached constant values in all experiments for all side weir
dimensions as in non-cohesive sediment. Thus, the scour depth
reached equilibrium conditions. Time to equilibrium depends on the
approach flow intensity and the dimensions of side weirs. For
different heights of the weir crest, dimensionless scour depths
increased with increasing upstream Froude number. Equilibrium
scour depths which formed 7 cm side-weir crest height were obtained
higher than that of the 12 cm side-weir crest height. This means when
side-weir crest height increased equilibrium scour depths decreased.
Although the upstream side of the scour hole is almost vertical, the
downstream side of the hole is inclined.
Abstract: Plasmin plays an important role in the human
circulatory system owing to its catalytic ability of fibrinolysis. The
immediate injection of plasmin in patients of strokes has intrigued
many scientists to design vectors that can transport plasmin to the
desired location in human body. Here we predict the structure of
human plasmin and investigate the interaction of plasmin with the
gold-nanoparticle.
Because the crystal structure of plasminogen has been solved, we
deleted N-terminal domain (Pan-apple domain) of plasminogen and
generate a mimic of the active form of this enzyme (plasmin). We
conducted a simulated annealing process on plasmin and discovered a
very large conformation occurs. Kringle domains 1, 4 and 5 had been
observed to leave its original location relative to the main body of the
enzyme and the original doughnut shape of this enzyme has been
transformed to a V-shaped by opening its two arms. This observation
of conformational change is consistent with the experimental results of
neutron scattering and centrifugation.
We subsequently docked the plasmin on the simulated gold surface
to predict their interaction. The V-shaped plasmin could utilize its
Kringle domain and catalytic domain to contact the gold surface.
Our findings not only reveal the flexibility of plasmin structure but
also provide a guide for the design of a plasmin-gold nanoparticle.
Abstract: Al6061 alloy base matrix, reinforced with particles of
silicon carbide (10 wt %) and Graphite powder (1wt%), known as
hybrid composites have been fabricated by liquid metallurgy route
(stir casting technique) and optimized at different parameters like
applied load, sliding speed and sliding distance by taguchi method. A
plan of experiment generated through taguchi technique was used to
perform experiments based on L27 orthogonal array. The developed
ANOVA and regression equations are used to find the optimum
coefficient of friction and wear under the influence of applied load,
sliding speed and sliding distance. On the basis of “smaller the best”
the dry sliding wear resistance was analysed and finally confirmation
tests were carried out to verify the experimental results.
Abstract: This paper investigates and compares the community
support for tourism development between two groups of minority
ethnic descendants in Malacca, Malaysia, namely the Baba-Nyonya
and Portuguese. A descriptive research design using a quantitative
method with self-reported and self-administered questionnaires
through across-sectional approach was applied. Through the
descriptive and inferential statistics, some significantly useful
insights pertaining to the issue investigated were obtained. The
research outcomes indicate that the sense of community is somewhat
more effective in small communities in terms of togetherness,
closeness and a sense of belonging compared to the slightly bigger
minority group. In addition, the sense of community attributes
through membership, influence, integration and shared emotional
connections contributes to community participation in tourism
development regardless of which ethnic group one belongs to.
Abstract: Quantitative analyses of whisker movements provide a
means to study functional recovery and regeneration of mouse facial
nerve after an injury. However, accurate tracking of the mouse whisker
movement is challenging. Most methods for whisker tracking require
manual intervention, e.g. fixing the head of the mouse during a study.
Here we describe a semi-automated image processing method, which
is applied to high-speed video recordings of free-moving mice to track
the whisker movements. We first track the head movement of a mouse
by delineating the lower head contour frame-by-frame that allows for
detection of the location and orientation of the head. Then, a region of
interest is identified for each frame; the subsequent application of a
mask and the Hough transform detects the selected whiskers on each
side of the head. Our approach is used to examine the functional
recovery of damaged facial nerves in mice over a course of 21 days.
Abstract: Mass media campaigns against obesity are often
designed to impact large audiences. This usually means that their
audience is defined based on general demographic characteristics like
age, gender, occupation etc., not taking into account psychographics
like behavior, motivations, wants, etc. Using psychographics, as the
base for the audience segmentation, is a common practice in case of
successful campaigns, as it allows developing more relevant
messages. It also serves a purpose of identifying key segments, those
that generate the best return on investment. For a health campaign,
that would be segments that have the best chance of being converted
into healthy lifestyle at the lowest cost. This paper presents the
limitations of the demographic targeting, based on the findings from
the reception study of IMSS (Mexican Social Security Institute) antiobesity
TV commercials and proposes mothers as the first level of
segmentation, in the process of identifying the key segment for these
campaigns.
Abstract: Purpose: The study aimed to assess the depressant or
antidepressant effects of several Nonsteroidal Anti-Inflammatory
Drugs (NSAIDs) in mice: the selective cyclooxygenase-2 (COX-2)
inhibitor meloxicam, and the non-selective COX-1 and COX-2
inhibitors lornoxicam, sodium metamizole, and ketorolac. The
current literature data regarding such effects of these agents are
scarce.
Materials and methods: The study was carried out on NMRI mice
weighing 20-35 g, kept in a standard laboratory environment. The
study was approved by the Ethics Committee of the University of
Medicine and Pharmacy „Carol Davila”, Bucharest. The study agents
were injected intraperitoneally, 10 mL/kg body weight (bw) 1 hour
before the assessment of the locomotor activity by cage testing (n=10
mice/ group) and 2 hours before the forced swimming tests (n=15).
The study agents were dissolved in normal saline (meloxicam,
sodium metamizole), ethanol 11.8% v/v in normal saline (ketorolac),
or water (lornoxicam), respectively. Negative and positive control
agents were also given (amitryptilline in the forced swimming test).
The cage floor used in the locomotor activity assessment was divided
into 20 equal 10 cm squares. The forced swimming test involved
partial immersion of the mice in cylinders (15/9cm height/diameter)
filled with water (10 cm depth at 28C), where they were left for 6
minutes. The cage endpoint used in the locomotor activity assessment
was the number of treaded squares. Four endpoints were used in the
forced swimming test (immobility latency for the entire 6 minutes,
and immobility, swimming, and climbing scores for the final 4
minutes of the swimming session), recorded by an observer that was
„blinded” to the experimental design. The statistical analysis used the
Levene test for variance homogeneity, ANOVA and post-hoc
analysis as appropriate, Tukey or Tamhane tests.
Results: No statistically significant increase or decrease in the
number of treaded squares was seen in the locomotor activity
assessment of any mice group. In the forced swimming test,
amitryptilline showed an antidepressant effect in each experiment, at
the 10 mg/kg bw dosage. Sodium metamizole was depressant at 100
mg/kg bw (increased the immobility score, p=0.049, Tamhane test),
but not in lower dosages as well (25 and 50 mg/kg bw). Ketorolac
showed an antidepressant effect at the intermediate dosage of 5
mg/kg bw, but not so in the dosages of 2.5 and 10 mg/kg bw,
respectively (increased the swimming score, p=0.012, Tamhane test).
Meloxicam and lornoxicam did not alter the forced swimming
endpoints at any dosage level.
Discussion: 1) Certain NSAIDs caused changes in the forced
swimming patterns without interfering with locomotion. 2) Sodium
metamizole showed a depressant effect, whereas ketorolac proved
antidepressant. Conclusion: NSAID-induced mood changes are not
class effects of these agents and apparently are independent of the
type of inhibited cyclooxygenase (COX-1 or COX-2).
Disclosure: This paper was co-financed from the European Social
Fund, through the Sectorial Operational Programme Human Resources Development 2007-2013, project number POSDRU /159
/1.5 /S /138907 "Excellence in scientific interdisciplinary research,
doctoral and postdoctoral, in the economic, social and medical fields
-EXCELIS", coordinator The Bucharest University of Economic
Studies.
Abstract: The aim of the current study was to develop and
validate a Response to Stressful Situations Scale (RSSS) for the
Portuguese population. This scale assesses the degree of stress
experienced in scenarios that can constitute positive, negative and
more neutral stressors, and also describes the physiological,
emotional and behavioral reactions to those events according to their
intensity. These scenarios include typical stressor scenarios relevant
to patients with schizophrenia, which are currently absent from most
scales, assessing specific risks that these stressors may bring on
subjects, which may prove useful in non-clinical and clinical
populations (i.e. Patients with mood or anxiety disorders,
schizophrenia). Results from Principal Components Analysis and
Confirmatory Factor Analysis of two adult samples from general
population allowed to confirm a three-factor model with good fit
indices: χ2 (144)= 370.211, p = 0.000; GFI = 0.928; CFI = 0.927; TLI =
0.914, RMSEA = 0.055, P(rmsea ≤0.005) = .096; PCFI = .781.
Further data analysis of the scale revealed that RSSS is an adequate
assessment tool of stress response in adults to be used in further
research and clinical settings, with good psychometric characteristics,
adequate divergent and convergent validity, good temporal stability
and high internal consistency.
Abstract: Advanced treatments such as forward osmosis (FO)
can be used to separate or reject nutrients from secondary treated
effluents. Forward osmosis uses the chemical potential across the
membrane, which is the osmotic pressure gradient, to induce water to
flow through the membrane from a feed solution (FS) into a draw
solution (DS). The performance of FO is affected by the membrane
characteristics, composition of the FS and DS, and operating
conditions. The aim of this study was to investigate the optimum
velocity and temperature for nutrient rejection and water flux
performance in FO treatments. MgCl2 was used as the DS in the FO
process. The results showed that higher cross flow velocities yielded
higher water fluxes. High rejection of nutrients was achieved by using
a moderate cross flow velocity at 0.25 m/s. Nutrient rejection was
insensitive to temperature variation, whereas water flux was
significantly impacted by it. A temperature of 25°C was found to be
good for nutrient rejection.
Abstract: The Orthogonal Frequency Division Multiplexing
(OFDM) with high data rate, high spectral efficiency and its ability to
mitigate the effects of multipath makes them most suitable in wireless
application. Impulsive noise distorts the OFDM transmission and
therefore methods must be investigated to suppress this noise. In this
paper, a State Space Recursive Least Square (SSRLS) algorithm
based adaptive impulsive noise suppressor for OFDM
communication system is proposed. And a comparison with another
adaptive algorithm is conducted. The state space model-dependent
recursive parameters of proposed scheme enables to achieve steady
state mean squared error (MSE), low bit error rate (BER), and faster
convergence than that of some of existing algorithm.