Abstract: The emergence of networked information and communication has transformed the accessibility and delivery of scholarly information and fundamentally impacted on the processes of research and scholarly communication. The purpose of this study is to investigate disciplinary differences in the use of networked information for research and scholarly communication at Sultan Qaboos University, Oman. This study has produced quantitative data about how and why academics within different disciplines utilize networked information that is made available either internally through the university library, or externally through networked services accessed by the Internet. The results indicate some significant differences between the attitudes and practice of academics in the science disciplines when compared to those from the social sciences and humanities. While respondents from science disciplines show overall longer and more frequent use of networked information, respondents from humanities and social sciences indicated more positive attitudes and a greater degree of satisfaction toward library networked services.
Abstract: This paper considers the influence of promotion
instruments for renewable energy sources (RES) on a multi-energy
modeling framework. In Europe, so called Feed-in Tariffs are
successfully used as incentive structures to increase the amount of
energy produced by RES. Because of the stochastic nature of large
scale integration of distributed generation, many problems have
occurred regarding the quality and stability of supply. Hence, a
macroscopic model was developed in order to optimize the power
supply of the local energy infrastructure, which includes electricity,
natural gas, fuel oil and district heating as energy carriers. Unique
features of the model are the integration of RES and the adoption of
Feed-in Tariffs into one optimization stage. Sensitivity studies are
carried out to examine the system behavior under changing profits
for the feed-in of RES. With a setup of three energy exchanging
regions and a multi-period optimization, the impact of costs and
profits are determined.
Abstract: Search for a tertiary substructure that geometrically
matches the 3D pattern of the binding site of a well-studied protein provides a solution to predict protein functions. In our previous work,
a web server has been built to predict protein-ligand binding sites
based on automatically extracted templates. However, a drawback of such templates is that the web server was prone to resulting in many
false positive matches. In this study, we present a sequence-order constraint to reduce the false positive matches of using automatically
extracted templates to predict protein-ligand binding sites. The binding site predictor comprises i) an automatically constructed template library and ii) a local structure alignment algorithm for
querying the library. The sequence-order constraint is employed to
identify the inconsistency between the local regions of the query protein and the templates. Experimental results reveal that the sequence-order constraint can largely reduce the false positive matches and is effective for template-based binding site prediction.
Abstract: School leadership is commonly considered to have a
significant influence on school effectiveness and improvement.
Effective school leaders are expected to successfully introduce and
support change and innovation at the school unit. Despite an
abundance of studies on educational leadership, very few studies
have provided evidence on the link between leadership models, and
specific educational and school outcomes. This is true of a popular
contemporary approach to leadership, namely, distributed leadership.
The paper provides an overview of research findings on the effect of
distributed leadership on educational outcomes. The theoretical basis
for this approach to leadership is presented, with reference to
methodological and research limitations. The paper discusses
research findings and draws their implications for educational
research on school leadership.
Abstract: The error diffusion method generates worm artifacts,
and weakens the edge of the halftone image when the continuous gray
scale image is reproduced by a binary image. First, to enhance the
edges, we propose the edge-enhancing filter by considering the
quantization error information and gradient of the neighboring pixels.
Furthermore, to remove worm artifacts often appearing in a halftone
image, we add adaptively random noise into the weights of an error
filter.
Abstract: Hybrid knowledge model is suggested as an underlying
framework for product development management. It can support such
hybrid features as ontologies and rules. Effective collaboration in
product development environment depends on sharing and reasoning
product information as well as engineering knowledge. Many studies
have considered product information and engineering knowledge.
However, most previous research has focused either on building the
ontology of product information or rule-based systems of engineering
knowledge. This paper shows that F-logic based knowledge model can
support such desirable features in a hybrid way.
Abstract: CT assessment of postoperative spine is challenging in the presence of metal streak artifacts that could deteriorate the
quality of CT images. In this paper, we studied the influence of different acquisition parameters on the magnitude of metal streaking.
A water-bath phantom was constructed with metal insertion similar with postoperative spine assessment. The phantom was scanned with
different acquisition settings and acquired data were reconstructed
using various reconstruction settings. Standardized ROIs were defined within streaking region for image analysis. The result shows
increased kVp and mAs enhanced SNR values by reducing image
noise. Sharper kernel enhanced image quality compared to smooth
kernel, but produced more noise in the images with higher CT fluctuation. The noise between both kernels were significantly
different (P
Abstract: The purpose of this research is to reduce the amount of incomplete coating of stainless steel washers in the electrodeposition painting process by using an experimental design technique. The surface preparation was found to be a major cause of painted surface quality. The influence of pretreating and painting process parameters, which are cleaning time, chemical concentration and shape of hanger were studied. A 23 factorial design with two replications was performed. The analysis of variance for the designed experiment showed the great influence of cleaning time and shape of hanger. From this study, optimized cleaning time was determined and a newly designed electrical conductive hanger was proved to be superior to the original one. The experimental verification results showed that the amount of incomplete coating defects decreased from 4% to 1.02% and operation cost decreased by 10.5%.
Abstract: Wireless sensor networks (WSN) consists of many sensor nodes that are placed on unattended environments such as military sites in order to collect important information. Implementing a secure protocol that can prevent forwarding forged data and modifying content of aggregated data and has low delay and overhead of communication, computing and storage is very important. This paper presents a new protocol for concealed data aggregation (CDA). In this protocol, the network is divided to virtual cells, nodes within each cell produce a shared key to send and receive of concealed data with each other. Considering to data aggregation in each cell is locally and implementing a secure authentication mechanism, data aggregation delay is very low and producing false data in the network by malicious nodes is not possible. To evaluate the performance of our proposed protocol, we have presented computational models that show the performance and low overhead in our protocol.
Abstract: Conception is the primordial part in the realization of
a computer system. Several tools have been used to help inventors to
describe their software. These tools knew a big success in the
relational databases domain since they permit to generate SQL script
modeling the database from an Entity/Association model. However,
with the evolution of the computer domain, the relational databases
proved their limits and object-relational model became used more
and more. Tools of present conception don't support all new concepts
introduced by this model and the syntax of the SQL3 language. We
propose in this paper a tool of help to the conception and
implementation of object-relational databases called «NAVIGTOOLS"
that allows the user to generate script modeling its database
in SQL3 language. This tool bases itself on the Entity/Association
and navigational model for modeling the object-relational databases.
Abstract: In the present study, the surface temperature history of the adaptor part in a two-stage supersonic launch vehicle is accurately predicted. The full Navier-Stokes equations are used to estimate the aerodynamic heat flux and the one-dimensional heat conduction in solid phase is used to compute the temperature history. The instantaneous surface temperature is used to improve the applied heat flux, to improve the accuracy of the results.
Abstract: An improved topology of a voltage-fed quasi-resonant
soft switching LCrCdc series-parallel half bridge inverter with a constant-frequency for electronic ballast applications is proposed in this paper. This new topology introduces a low-cost solution to
reduce switching losses and circuit rating to achieve high-efficiency
ballast. Switching losses effect on ballast efficiency is discussed
through experimental point of view. In this discussion, an improved
topology in which accomplishes soft switching operation over a wide
power regulation range is proposed. The proposed structure uses reverse recovery diode to provide better operation for the ballast system. A symmetrical pulse wide modulation (PWM) control scheme is implemented to regulate a wide range of out-put power.
Simulation results are kindly verified with the experimental
measurements obtained by ballast-lamp laboratory prototype. Different load conditions are provided in order to clarify the
performance of the proposed converter.
Abstract: This study is to investigate the electroencephalogram (EEG) differences generated from a normal and Alzheimer-s disease (AD) sources. We also investigate the effects of brain tissue distortions due to AD on EEG. We develop a realistic head model from T1 weighted magnetic resonance imaging (MRI) using finite element method (FEM) for normal source (somatosensory cortex (SC) in parietal lobe) and AD sources (right amygdala (RA) and left amygdala (LA) in medial temporal lobe). Then, we compare the AD sourced EEGs to the SC sourced EEG for studying the nature of potential changes due to sources and 5% to 20% brain tissue distortions. We find an average of 0.15 magnification errors produced by AD sourced EEGs. Different brain tissue distortion models also generate the maximum 0.07 magnification. EEGs obtained from AD sources and different brain tissue distortion levels vary scalp potentials from normal source, and the electrodes residing in parietal and temporal lobes are more sensitive than other electrodes for AD sourced EEG.
Abstract: Variable ordering heuristics are used in constraint satisfaction algorithms. Different characteristics of various variable ordering heuristics are complementary. Therefore we have tried to get the advantages of all heuristics to improve search algorithms performance for solving constraint satisfaction problems. This paper considers combinations based on products and quotients, and then a newer form of combination based on weighted sums of ratings from a set of base heuristics, some of which result in definite improvements in performance.
Abstract: In present work the problem of the ITER fusion
plasma neutron source parameter reconstruction using only the
Vertical Neutron Camera data was solved. The possibility of neutron
source parameter reconstruction was estimated by the numerical
simulations and the analysis of adequateness of mathematic model
was performed. The neutron source was specified in a parametric
form. The numerical analysis of solution stability with respect to data
distortion was done. The influence of the data errors on the
reconstructed parameters is shown:
• is reconstructed with errors less than 4% at all examined values
of δ (until 60%);
• is determined with errors less than 10% when δ do not overcome
5%;
• is reconstructed with relative error more than 10 %;
• integral intensity of the neutron source is determined with error
10% while δ error is less than 15%;
where -error of signal measurements, (R0,Z0), the plasma center
position,- /parameter of neutron source profile.
Abstract: In the past decade, the development of microstrip
sensor application has evolved tremendously. Although cut and trial
method was adopted to develop microstrip sensing applications in the
past, Computer-Aided-Design (CAD) is a more effective as it ensures
less time is consumed and cost saving is achieved in developing
microstrip sensing applications. Therefore microstrip sensing
applications has gained popularity as an effective tool adopted in
continuous sensing of moisture content particularly in products that is
administered mainly by liquid content. In this research, the Cole-Cole
representation of reactive relaxation is applied to assess the
performance of the microstrip sensor devices. The microstrip sensor
application is an effective tool suitable for sensing the moisture
content of dielectric material. Analogous to dielectric relaxation
consideration of Cole-Cole diagrams as applied to dielectric
materials, a “reactive relaxation concept” concept is introduced to
represent the frequency-dependent and moisture content
characteristics of microstrip sensor devices.
Abstract: As is known, one of the priority directions of research
works of natural sciences is introduction of applied section of
contemporary mathematics as approximate and numerical methods to
solving integral equation into practice. We fare with the solving of
integral equation while studying many phenomena of nature to whose
numerically solving by the methods of quadrature are mainly applied.
Taking into account some deficiency of methods of quadrature for
finding the solution of integral equation some sciences suggested of
the multistep methods with constant coefficients. Unlike these papers,
here we consider application of hybrid methods to the numerical
solution of Volterra integral equation. The efficiency of the suggested
method is proved and a concrete method with accuracy order p = 4
is constructed. This method in more precise than the corresponding
known methods.
Abstract: Object Relational Databases (ORDB) are complex in
nature than traditional relational databases because they combine the
characteristics of both object oriented concepts and relational
features of conventional databases. Design of an ORDB demands
efficient and quality schema considering the structural, functional
and componential traits. This internal quality of the schema is
assured by metrics that measure the relevant attributes. This is
extended to substantiate the understandability, usability and
reliability of the schema, thus assuring external quality of the
schema. This work institutes a formalization of ORDB metrics;
metric definition, evaluation methodology and the calibration of the
metric. Three ORDB schemas were used to conduct the evaluation
and the formalization of the metrics. The metrics are calibrated using
content and criteria related validity based on the measurability,
consistency and reliability of the metrics. Nominal and summative
scales are derived based on the evaluated metric values and are
standardized. Future works pertaining to ORDB metrics forms the
concluding note.
Abstract: Insect pests are the major source of crop
damage, yield and quality reduction in Pakistan and else
where in the world. Cotton crop is the most hit crop in
Pakistan followed by rice and the second most important
foreign exchange earning crop. A wide variety of staple,
horticultural and cash crops grown, reflect serious problems of
many types of insect pests. To overcome the insect pest
problem, pesticide use in Pakistan has increased substantially
which has now been further intensified. Pesticides worth more
than billions of rupees are imported every year. This paper
reviews the over all pesticide use in Pakistan in relation to
pesticide prices, support price of cotton and rice, pesticide use
in different provinces of Pakistan on different crops and their
impact on crop productivity. The environmental pollution
caused by the use of pesticides, contamination of soil and
water resources and the danger associated with the disposal of
their empty containers is also discussed in detail.
Abstract: In switch mode power inverters, small sized inverters
can be obtained by increasing the switching frequency. Switching
frequency increment causes high driver losses. Also, high dt
di
and
dt
dv
produced by the switching action creates high Electromagnetic
Interference (EMI) and Radio Frequency Interference (RFI). In this
paper, a series half bridge series resonant inverter circuit is simulated
and evaluated practically to demonstrate the turn-on and turn-off
conditions during zero or close to zero voltage switching. Also, the
reverse recovery current effects of the body diode of the MOSFETs
were investigated by operating above and below resonant frequency.