Abstract: The purpose of the study is to investigate the level of
intrinsic motivation of trainers after attending a Continuous
Professional Development Course (CPD) organized by Institute of
Teacher Training Malaysia titled, “Transformation of Teaching and
Learning the Fun Way”. This study employed a survey whereby 96
teacher trainers were given Situational Intrinsic Motivational Scale
(SIMS) Instruments. Confirmatory factor analysis was carried out to
get the validity of this instrument in local setting. Data were analyzed
with SPSS for descriptive statistic. Semi- structured interviews were
also administrated to collect qualitative data on participants’
experiences after participating in the two-day fun-filled program. The
findings showed that the participants’ level of intrinsic motivation
showed higher mean than the amotivation. The results revealed that
the intrinsic motivation mean is 19.0 followed by Identified
regulation with a mean of 17.4, external regulation 9.7 and
amotivation 6.9. The interview data also revealed that the participants
were motivated after attending this training program. It can be
concluded that this program, which was organized by Institute of
Teacher Training Malaysia, was able to enhance participants’ level of
motivation. Self-Determination Theory (SDT) as a multidimensional
approach to motivation was utilized. Therefore, teacher trainers may
have more success using the “The fun way approach” in conducting
training program in future.
Abstract: The power electronic components within Electric Vehicles (EV) need to operate in several important modes. Some modes directly influence safety, while others influence vehicle performance. Given the variety of functions and operational modes required of the power electronics, it needs to meet efficiency requirements to minimize power losses. Another challenge in the control and construction of such systems is the ability to support bidirectional power flow. This paper considers the construction, operation, and feasibility of available converters for electric vehicles with feasible configurations of electrical buses and loads. This paper describes logic and control signals for the converters for different operations conditions based on the efficiency and energy usage bases.
Abstract: The aim of the study was to investigate the effect of
Saccharomyces cerevisiae (SC) live yeast culture on microbial
protein supply to small intestine in Kivircik male yearlings when fed
with different ratio of forage and concentrate diets. Four Kivircik
male yearlings with permanent rumen canula were used in the
experiment. The treatments were allocated to a 4x4 Latin square
design. Diet I consisted of 70% alfalfa hay and 30% concentrate, Diet
II consisted of 30% alfalfa hay and 70% concentrate, Diet I and II
were supplemented with a SC. Daily urine was collected and stored at
-20°C until analysis. Calorimetric methods were used for the
determination of urinary allantoin and creatinine levels. The
estimated microbial N supply to small intestine for Diets I, I+SC, II
and II+SC were 2.51, 2.64, 2.95 and 3.43 g N/d respectively.
Supplementation of Diets I and II with SC significantly affected the
allantoin levels in μmol/W0.75 (p
Abstract: The transesterification of dimethyl malonate (DMM)
with phenol has been studied in vapour phase over cordierite
honeycomb coated with solid acid catalysts such as ZrO2,
Mo(VI)/ZrO2 and SO42-/ZrO2. The catalytic materials were prepared
honeycomb coated, powder forms, and characterized for their total
surface acidity by NH3-TPD and crystalinity by powder XRD
methods. Phenyl methyl malonate (PMM) and diphenyl malonate
(DPM) were obtained as the reaction products. A good conversion of
DMM (up to 82%) of MPM with 95% selectivity was observed when
the reactions were carried out at a catalyst bed temperature of 200 °C
and flow-rate of 10 mL/h in presence of Mo(VI)/ZrO2 as catalyst.
However, over SO4^2-/ZrO2 catalyst, the yield of DPM was found to be
higher. The results have been interpreted based on the variation of
acidic properties and powder XRD phases of zirconia on
incorporation of Mo(VI) or SO42– ions. Transesterification reactions
were also carried out over powder forms of the catalytic materials
and the yield of the desired phenyl ester products were compared
with that of the HC coated catalytic materials. The solid acids were
found to be reusable when used for at least 5 reaction cycles.
Abstract: Considering the challenges of short product life cycles
and growing variant diversity, cost minimization and manufacturing
flexibility increasingly gain importance to maintain a competitive
edge in today’s global and dynamic markets. In this context, an
aerodynamic part feeding system for high-speed industrial assembly
applications has been developed at the Institute of Production
Systems and Logistics (IFA), Leibniz Universitaet Hannover. The
aerodynamic part feeding system outperforms conventional systems
with respect to its process safety, reliability, and operating speed. In
this paper, a multi-objective optimisation of the aerodynamic feeding
system regarding the orientation rate, the feeding velocity, and the
required nozzle pressure is presented.
Abstract: In this paper, a robust fault detection and isolation
(FDI) scheme is developed to monitor a multivariable nonlinear
chemical process called the Chylla-Haase polymerization reactor,
when it is under the cascade PI control. The scheme employs a radial
basis function neural network (RBFNN) in an independent mode to
model the process dynamics, and using the weighted sum-squared
prediction error as the residual. The Recursive Orthogonal Least
Squares algorithm (ROLS) is employed to train the model to
overcome the training difficulty of the independent mode of the
network. Then, another RBFNN is used as a fault classifier to isolate
faults from different features involved in the residual vector. Several
actuator and sensor faults are simulated in a nonlinear simulation of
the reactor in Simulink. The scheme is used to detect and isolate the
faults on-line. The simulation results show the effectiveness of the
scheme even the process is subjected to disturbances and
uncertainties including significant changes in the monomer feed rate,
fouling factor, impurity factor, ambient temperature, and
measurement noise. The simulation results are presented to illustrate
the effectiveness and robustness of the proposed method.
Abstract: Durian skin is a newly explores natural fibre
potentially reinforced polyolefin for diverse applications. In this
work, investigation on the effect of coupling agent, maleic anhydride
polypropylene (MAPP) on the mechanical, morphological, and
thermal properties of polypropylene (PP) reinforced with durian skin
fibre (DSF) was conducted. The presence of 30 wt% DSF
significantly reduced the tensile strength of PP-DSF composite.
Interestingly, even though the same trend goes to PP-DSF with the
presence of MAPP, the reduction is only about 4% relative to
unreinforced PP and 18% higher than PP-DSF without MAPP
(untreated composite or UTC). The used of MAPP in treated
composite (TC) also increased the tensile modulus, flexural
properties and degradation temperature. The enhanced mechanical
properties are consistent with good interfacial interaction as
evidenced under scanning electron microscopy.
Abstract: A model to predict the plastic zone size for material
under plane stress condition has been developed and verified
experimentally. The developed model is a function of crack size,
crack angle and material property (dislocation density). Simulation
and validation results show that the model developed show good
agreement with experimental results. Samples of low carbon steel
(0.035%C) with included surface crack angles of 45o, 50o, 60o, 70o
and 90o and crack depths of 2mm and 4mm were subjected to low
strain rate between 0.48 x 10-3 s-1 – 2.38 x 10-3 s-1. The mechanical
properties studied were ductility, tensile strength, modulus of
elasticity, yield strength, yield strain, stress at fracture and fracture
toughness. The experimental study shows that strain rate has no
appreciable effect on the size of plastic zone while crack depth and
crack angle plays an imperative role in determining the size of the
plastic zone of mild steel materials.
Abstract: The goal of this paper is to identify the main
differences in the way men and women perceive TV ads. This paper
is based on a research project conducted partly as a review of relevant
papers, which deals with gender influence on the cognitive process
and postmodern perception of advertising. In addition to that,
qualitative research was conducted by means of interviews and
structured questionnaires. Furthermore, data acquired from the
research were used to evaluate our objectives and hypotheses. The
goal of this paper is to compare women's and men's perception of
advertisement. Although women are able to perceive more details
than men, men are more susceptible to sexual appeals in advertising.
Significant differences were also found in the perception of sexual
appeals in the context of gender.
Abstract: Political participation involves voluntary and
deliberate efforts by the members of a political system to determine
the kinds of political institution and individuals that will govern them
and equally influence the mobilization and allocation of the available
societal resources. Over the years, youths in Nigeria participate
actively in political party rallies and voting to elect their leaders and
representatives in governance. This paper examines categories and
nature of participation in politics as well as factors that drive youths
into politics in Sokoto State. A survey conducted, through focus
group discussions, interviews and questionnaire, in the six sampled
Local Government of Sokoto State identifies three category of
political participation; namely, active, moderate and apathetic
participation. The findings reveal that 63.57% of respondents are
apathetic to politics in the State and unemployed youth constitutes
34.74% of the entire responses. The paper establishes that lack of
attainment of need (63.22%) is one of the reasons that make youths
engage into participatory activities that encourage political thuggery
and manipulation of electoral outcomes. The paper recommends that
youths should be engaged into positive rational participatory
activities that ensure inclusiveness and promotion of good
governance in Nigeria. It is hoped that this will enlighten youths and
policy implementers on the constructive strategies in controlling
youths’ negative participation in politics in Nigeria.
Abstract: Production fluids are transported from the platform to
tankers or process facilities through transfer pipelines. Water being
one of the heavier phases tends to settle at the bottom of pipelines
especially at low flow velocities and this has adverse consequences
for pipeline integrity. On restart after a shutdown, this could result in
corrosion and issues for process equipment, thus the need to have the
heavier liquid dispersed into the flowing lighter fluid. This study
looked at the flow regime of low water cut and low flow velocity oil
and water flow using conductive film thickness probes in a large
diameter 4-inch pipe to obtain oil and water interface height and the
interface structural velocity. A wide range of 0.1–1.0 m/s oil and
water mixture velocities was investigated for 0.5–5% water cut. Two
fluid model predictions were used to compare with the experimental
results.
Abstract: Selenium is an-antioxidant which is important for
human health enters food chain through crops. In Kenya Zea mays is
consumed by 96% of population hence is a cheap and convenient
method to provide selenium to large number of population. Several
soil factors are known to have antagonistic effects on selenium
speciation hence the uptake by Zea mays. There are no studies in
Kenya that has been done to determine the effects of soil
characteristics (pH, Tcarbon, CEC, Eh) affect accumulation of
selenium in Zea mays grains in Maize Belt in Kenya. About 100 Zea mays grain samples together with 100 soil samples
were collected from the study site put in separate labeled Ziplocs and
were transported to laboratories at room temperature for analysis.
Maize grains were analyzed for selenium while soil samples were
analyzed for pH, Cat Ion Exchange Capacity, total carbon, and
electrical conductivity. The mean selenium in Zea mays grains varied from 1.82 ± 0.76
mg/Kg to 11±0.86 mg/Kg. There was no significant difference
between selenium levels between different grain batches {χ (Df =76)
= 26.04 P= 1.00} The pH levels varied from 5.43± 0.58 to 5.85±
0.32. No significant correlations between selenium in grains and soil
pH (Pearson’s correlations = - 0.143), and between selenium levels in
grains and the four (pH, Tcarbon, CEC, Eh) soil chemical
characteristics {F (4,91) = 0.721 p = 0.579} was observed. It can be concluded that the soil chemical characteristics in the
study site did not significantly affect the accumulation of native
selenium in Zea mays grains.
Abstract: Poverty alleviation is one of the most difficult
challenges facing third world countries in their development efforts.
Evidences in Nigeria showed that the number of those in poverty has
continued to increase. This paper is aimed at analyzing the
performance of poverty alleviation measures undertaken by
successive administrations in Nigeria with a view to addressing the
quagmire. The study identified the whole gamut of factors that served
as stumbling blocks to the implementation of each of the strategies
and recommended the involvement of local people in the
identification and design of projects so that sufficient participation
could be achieved.
Abstract: The modelling of physical phenomena, such as the
earth’s free oscillations, the vibration of strings, the interaction of
atomic particles, or the steady state flow in a bar give rise to Sturm-
Liouville (SL) eigenvalue problems. The boundary applications of
some systems like the convection-diffusion equation, electromagnetic
and heat transfer problems requires the combination of Dirichlet and
Neumann boundary conditions. Hence, the incorporation of Robin
boundary condition in the analyses of Sturm-Liouville problem. This
paper deals with the computation of the eigenvalues and
eigenfunction of generalized Sturm-Liouville problems with Robin
boundary condition using the finite element method. Numerical
solution of classical Sturm–Liouville problem is presented. The
results show an agreement with the exact solution. High results
precision is achieved with higher number of elements.
Abstract: Global economy today is full of sophistication. All
over the world, business and marketing practices are undergoing
unprecedented transformation. In realization of this fact, the federal
government of Nigeria has put in place a robust transformation
agenda in order to put Nigeria in a better position to be a competitive
player and in the process transform all sectors of its economy. New
technologies, especially the Internet, are the driving force behind this
transformation. However, technology has inadvertently affected the
way businesses are done thus necessitating the acquisition of new
skills. In developing countries like Nigeria, citizens are still battling
with effective application of those technologies. Obviously, students
of business education need to acquire relevant business knowledge to
be able to transit into the world of work on graduation from school
and compete favorably in the labor market. Therefore, effective
utilization of social media by both teachers and students can help
extensively in empowering students with the needed skills. Social
media which is a group of Internet-based applications built on the
ideological foundations of Web 2.0, that allow the creation and
exchange of user generated content, and if incorporated into the
classroom experience may be the needed answer to unemployment
and poverty in Nigeria as beneficiaries can easily connect with
existing and potential enterprises and customers, engage with them
and reinforce mutual business benefits. Challenges and benefits of
social media use in education in Nigeria universities were revealed in
this study.
Abstract: This research was made during the 2015 growing
periods in the trial filed of "Research Station for Department of Field
Crops, Agricultural Faculty, Selcuk University" according to
“Randomized Blocks Design” with 3 replications. Research material
was the following pea lines; PS16, PS18, PS21, PS23, PS24, PS25,
PS36, PS47, PS49, PS51, PS54, PS58, PS67, PS69, PS71, PS73,
PS83, PS84, PS87 and PSKY and three cultivars and other 2
commercial varieties named as Bolero, Rondo and Ultrello. Some
agronomical characteristics such as plant height (cm) number of pod
per plant number of seed per pod number of seed per plant 100 seed
weight (g) and seed yield (kg ha-1) were determined. The highest seed
yield was obtained 2727.0 kg ha-1 in the PS71 line and the lowest
value was obtained 1238.0 kg ha-1 in the commercial variety of
Bolero. Results of the research implicated that the new developed
lines were superior compared with the control (commercial) varieties
by means of most of the characteristics. Nevertheless, similar
researches should be continued in different locations and years.
Abstract: This research work presents the surface
thermodynamics approach to M-TB/HIV-Human sputum
interactions. This involved the use of the Hamaker coefficient
concept as a surface energetics tool in determining the interaction
processes, with the surface interfacial energies explained using van
der Waals concept of particle interactions. The Lifshitz derivation for
van der Waals forces was applied as an alternative to the contact
angle approach which has been widely used in other biological
systems. The methodology involved taking sputum samples from
twenty infected persons and from twenty uninfected persons for
absorbance measurement using a digital Ultraviolet visible
Spectrophotometer. The variables required for the computations with
the Lifshitz formula were derived from the absorbance data. The
Matlab software tools were used in the mathematical analysis of the
data produced from the experiments (absorbance values). The
Hamaker constants and the combined Hamaker coefficients were
obtained using the values of the dielectric constant together with the
Lifshitz Equation. The absolute combined Hamaker coefficients
A132abs and A131abs on both infected and uninfected sputum samples
gave the values of A132abs = 0.21631x10-21Joule for M-TB infected
sputum and Ã132abs = 0.18825x10-21Joule for M-TB/HIV infected
sputum. The significance of this result is the positive value of the
absolute combined Hamaker coefficient which suggests the existence
of net positive van der waals forces demonstrating an attraction
between the bacteria and the macrophage. This however, implies that
infection can occur. It was also shown that in the presence of HIV,
the interaction energy is reduced by 13% conforming adverse effects
observed in HIV patients suffering from tuberculosis.
Abstract: Education and practical training crisis management
members are a topical issue nowadays. The paper deals with the
perspectives and possibilities of "smart solutions" to education for
crisis management staff. Currently, there is a large number of
simulation tools, which notes that they are suitable for practical
training of crisis management staff. The first part of the paper is focused on the introduction of the
technology simulation tools. The simulators aim is to create a
realistic environment for the practical training of extending units of
crisis staff. The second part of the paper concerns the possibilities of using the
simulation technology to the education process. The aim of this
section is to introduce the practical capabilities and potential of the
simulation programs for practical training of crisis management staff.
Abstract: The aim of this study is to evaluate the effect of
supplementing broiler starter diet with different levels of an essential
oil blend (EOB) containing capsaicin, carvacrol and cinnamaldehyde
on the performance of broilers. A total of 300 day-old straight-run
Cobb broiler chicks were randomly assigned to three treatments after
7-day group brooding following a completely randomized design
(CRD). Birds assigned in treatment 1 were given starter basal diet
while those in treatments 2 and 3 were given starter basal diet with
400 mg/kg antibiotic growth promoter (AGP) and 150 mg/kg EOB,
respectively, until the 28th day. Basal finisher feed were given for all
the treatments until harvest. Following 37 d feeding, body weight
gain, feed consumption, feed efficiency, dressing percentage,
livability and jejunal villi height were determined. Results showed no
significant differences (P>0.05) in growth performance. However,
villi height and crypt depth was significantly lower for birds fed
EOB.
Abstract: Finding the optimal 3D path of an aerial vehicle under
flight mechanics constraints is a major challenge, especially when
the algorithm has to produce real time results in flight. Kinematics
models and Pythagorian Hodograph curves have been widely used
in mobile robotics to solve this problematic. The level of difficulty
is mainly driven by the number of constraints to be saturated at the
same time while minimizing the total length of the path. In this paper,
we suggest a pragmatic algorithm capable of saturating at the same
time most of dimensioning helicopter 3D trajectories’ constraints
like: curvature, curvature derivative, torsion, torsion derivative, climb
angle, climb angle derivative, positions. The trajectories generation
algorithm is able to generate versatile complex 3D motion primitives
feasible by a helicopter with parameterization of the curvature and the
climb angle. An upper ”motion primitives’ concatenation” algorithm
is presented based. In this article we introduce a new way of designing
three-dimensional trajectories based on what we call the ”Dubins
gliding symmetry conjecture”. This extremely performing algorithm
will be soon integrated to a real-time decisional system dealing with
inflight safety issues.