Abstract: The fatigue life of tubular joints commonly found in
offshore industry is not only dependent on the value of hot-spot stress
(HSS), but is also significantly influenced by the through-thethickness
stress distribution characterized by the degree of bending
(DoB). The determination of DoB values in a tubular joint is essential
for improving the accuracy of fatigue life estimation using the stresslife
(S–N) method and particularly for predicting the fatigue crack
growth based on the fracture mechanics (FM) approach. In the
present paper, data extracted from finite element (FE) analyses of
tubular KT-joints, verified against experimental data and parametric
equations, was used to investigate the effects of geometrical
parameters on DoB values at the crown 0°, saddle, and crown 180°
positions along the weld toe of central brace in tubular KT-joints
subjected to axial loading. Parametric study was followed by a set of
nonlinear regression analyses to derive DoB parametric formulas for
the fatigue analysis of KT-joints under axial loads. The tubular KTjoint
is a quite common joint type found in steel offshore structures.
However, despite the crucial role of the DoB in evaluating the fatigue
performance of tubular joints, this paper is the first attempt to study
and formulate the DoB values in KT-joints.
Abstract: Cooperative spectrum sensing is a crucial challenge in
cognitive radio networks. Cooperative sensing can increase the
reliability of spectrum hole detection, optimize sensing time and
reduce delay in cooperative networks. In this paper, an efficient
central capacity optimization algorithm is proposed to minimize
cooperative sensing time in a homogenous sensor network using OR
decision rule subject to the detection and false alarm probabilities
constraints. The evaluation results reveal significant improvement in
the sensing time and normalized capacity of the cognitive sensors.
Abstract: Water miscible cutting fluids are conventionally used to lubricate and cool the machining zone. But issues related to health hazards, maintenance and disposal costs have limited their usage, leading to application of Minimum Quantity Lubrication (MQL). To increase the effectiveness of MQL, nanocutting fluids are proposed. In the present work, water miscible nanographite cutting fluids of varying concentration are applied at cutting zone by two systems A and B. System A utilizes high pressure air and supplies cutting fluid at a flow rate of 1ml/min. System B uses low pressure air and supplies cutting fluid at a flow rate of 5ml/min. Their performance in machining is evaluated by measuring cutting temperatures, tool wear, cutting forces and surface roughness and compared with dry machining and flood machining. Application of nanocutting fluid using both systems showed better performance than dry machining. Cutting temperatures and cutting forces obtained by both techniques are more than flood machining. But tool wear and surface roughness showed improvement compared to flood machining. Economic analysis has been carried out in all the cases to decide the applicability of the techniques.
Abstract: In this paper, a summary of analytical and
experimental studies into the behavior of a new hysteretic damper,
designed for seismic protection of structures is presented. The Multidirectional
Torsional Hysteretic Damper (MRSD) is a patented
invention in which a symmetrical arrangement of identical cylindrical
steel cores is so configured as to yield in torsion while the structure
experiences planar movements due to earthquake shakings. The new
device has certain desirable properties. Notably, it is characterized by
a variable and controllable-via-design post-elastic stiffness. The
mentioned property is a result of MRSD’s kinematic configuration
which produces this geometric hardening, rather than being a
secondary large-displacement effect. Additionally, the new system is
capable of reaching high force and displacement capacities, shows
high levels of damping, and very stable cyclic response. The device
has gone through many stages of design refinement, multiple
prototype verification tests and development of design guide-lines
and computer codes to facilitate its implementation in practice.
Practicality of the new device, as offspring of an academic sphere, is
assured through extensive collaboration with industry in its final
design stages, prototyping and verification test programs.
Abstract: The main purpose of this study was to figure out
employees’ attitudes toward the new performance appraisal program
and to examine whether three different types of appraisal processes
differentially affected job satisfaction and employee engagement. The
second purpose of this study was to investigate the relationship
between performance appraisal reform, job satisfaction, and employee
engagement. A large polyester and textile corporation had 2046
non-operational employees in February 2014. The valid participants
were 1474 (72.04%) in this study. Data analysis included descriptive
statistics, one-way ANOVA, one-way MANOVA, Pearson correlation,
Content Validity Index, the exploratory factor analysis, and reliability
analysis. The general results showed that employees who received the
new performance appraisal program evaluated the program more
positively and showed more job satisfaction than those who did not. In
particular, the implementation effects of this new performance
appraisal program were most highly rated by employees who used the
KPI to rate their job performance. Moreover, employees’ attitudes
toward the new performance appraisal program were positively related
to their job satisfaction and employee engagement. Lastly, most
employees regarded themselves as engaged workers. To sum up, the
HR department of this company has made an effective contribution to
performance appraisal reforms.
Abstract: Auditory hallucinations among the most invalidating
and distressing experiences reported by patients diagnosed with
schizophrenia, leading to feelings of powerlessness and helplessness
towards their illness. In more severe cases, these auditory
hallucinations can take the form of commanding voices, which are
often related to high suicidality rates in these patients. Several
authors propose that the meanings attributed to the hallucinatory
experience, rather than characteristics like form and content, can be
determinant in patients’ reactions to hallucinatory activity,
particularly in the case of voice-hearing experiences. In this study, 48
patients diagnosed with paranoid schizophrenia presenting auditory
hallucinations were studied. Multiple regression analyses were
computed to study the influence of several developmental aspects,
such as family and social dynamics, bullying, depression, and sociocognitive
variables on the auditory hallucinations, on patients’
attributions and relationships with their voices, and on the resulting
invalidation of hallucinatory experience. Overall, results showed how
relationships with voices can mirror several aspects of interpersonal
relationship with others, and how self-schemas, depression and actual
social relationships help shaping the voice-hearing experience. Early
experiences of victimization and submission help predict the
attributions of omnipotence of the voices, and increased hostility
from parents seems to increase the malevolence of the voices,
suggesting that socio-cognitive factors can significantly contribute to
the etiology and maintenance of auditory hallucinations. The
understanding of the characteristics of auditory hallucinations and the
relationships patients established with their voices can allow the
development of more promising therapeutic interventions that can be
more effective in decreasing invalidation caused by this devastating
mental illness.
Abstract: This paper describes an optimization tool-based
design strategy for a Current Mode Logic CML divide-by-2 circuit.
Representing a building block for output frequency generation in a
RFID protocol based-frequency synthesizer, the circuit was designed
to minimize the power consumption for driving of multiple loads
with unbalancing (at transceiver level). Implemented with XFAB
XC08 180 nm technology, the circuit was optimized through
MunEDA WiCkeD tool at Cadence Virtuoso Analog Design
Environment ADE.
Abstract: Image Processing is a structure of Signal Processing
for which the input is the image and the output is also an image or
parameter of the image. Image Resolution has been frequently
referred as an important aspect of an image. In Image Resolution
Enhancement, images are being processed in order to obtain more
enhanced resolution. To generate highly resoluted image for a low
resoluted input image with high PSNR value. Stationary Wavelet
Transform is used for Edge Detection and minimize the loss occurs
during Downsampling. Inverse Discrete Wavelet Transform is to get
highly resoluted image. Highly resoluted output is generated from the
Low resolution input with high quality. Noisy input will generate
output with low PSNR value. So Noisy resolution enhancement
technique has been used for adaptive sub-band thresholding is used.
Downsampling in each of the DWT subbands causes information loss
in the respective subbands. SWT is employed to minimize this loss.
Inverse Discrete wavelet transform (IDWT) is to convert the object
which is downsampled using DWT into a highly resoluted object.
Used Image denoising and resolution enhancement techniques will
generate image with high PSNR value. Our Proposed method will
improve Image Resolution and reached the optimized threshold.
Abstract: The chemical and physical characteristics of rainwater
harvested from a typical rooftop were progressively studied. The
samples of rainwater collected were analyzed for pH, major ion
concentrations, TDS, turbidity, conductivity. All the Physicochemical
constituents fell within the WHO guideline limits at some points as
rainfall progresses except the pH. All the components of rainwater
quality measured during the study showed higher concentrations
during the early stages of rainfall and reduce as time progresses.
There was a downward trend in terms of pH as rain progressed, with
18% of the samples recording pH below the WHO limit of 6.5-8.0. It
was observed that iron concentration was above the WHO threshold
value of 0.3 mg/l on occasions of heavy rains. The results revealed
that most of physicochemical characteristics of rainwater samples
were generally below the WHO threshold, as such, the rainwater
characteristics showed satisfactory conditions in terms of
physicochemical constituents.
Abstract: Roles of the vegetation to mitigate the erosion of the
stream bed or to facilitate the deposition of the fine sediments by the
species of the aquatic plants were presented. Field investigation on the
estimation of the change of the bed level and the estimation of the flow
characteristics were performed. The results showed that Phragmites
japonica has the mitigation function of 0.3m-0.4m of the erosion in the
range of higher than 1.0m/s of flow velocity at the vegetated region.
Phragmites communis has the mitigation function of 0.2m-0.3m of the
erosion in the range of higher than 0.7m/s of flow velocity at the
vegetated region. Salix gracilistyla has greater role than Phragmites
japonica and Phragmites communis to sustain the stable channel. It
has the mitigation function of 0.4m-0.5m of the erosion in the range of
higher than 1.4m/s of flow velocity. Miscanthus sacchariflorus has a
weak role compared with that of Phragmites japonica and Salix
gracilistyla, but it has still function for sustaining the stable bed. From
these results, the vegetation has effective roles to mitigate the erosion
or to facilitate the deposition of the stream bed.
Abstract: The addition of lime as Ca(OH)2 to sewage sludge to
destroy pathogens (Escherichia coli), was evaluated also in relation
to heavy metal bioavailability.
The obtained results show that the use of calcium hydroxide at the
dose of 3% effectively destroyed pathogens ensuring the stability at
high pH values over long period and the duration of the sewage
sludge stabilization. In general, lime addition decreased the total
extractability of heavy metals indicating a reduced bioavailability of
these elements. This is particularly important for a safe utilization in
agricultural soils to reduce the possible transfer of heavy metals to
the food chain.
Abstract: In this research, TRACE model of Chinshan BWR/4
nuclear power plant (NPP) has been developed for the simulation and
analysis of ultimate response guideline (URG).The main actions of
URG are the depressurization and low pressure water injection of
reactor and containment venting. This research focuses to verify the
URG efficiency under Fukushima-like conditions. TRACE analysis
results show that the URG can keep the PCT below the criteria
1088.7 K under Fukushima-like conditions. It indicated that Chinshan
NPP was safe.
Abstract: In statistics parameter theory, usually the
parameter estimations have two kinds, one is the least-square
estimation (LSE), and the other is the best linear unbiased
estimation (BLUE). Due to the determining theorem of
minimum variance unbiased estimator (MVUE), the parameter
estimation of BLUE in linear model is most ideal. But since
the calculations are complicated or the covariance is not
given, people are hardly to get the solution. Therefore, people
prefer to use LSE rather than BLUE. And this substitution
will take some losses. To quantize the losses, many scholars
have presented many kinds of different relative efficiencies in
different views. For the linear weighted regression model, this
paper discusses the relative efficiencies of LSE of β to BLUE
of β. It also defines two new relative efficiencies and gives
their lower bounds.
Abstract: Froth flotation remains to date as one of the most used
metallurgical processes for concentrating metal-bearing minerals in
ores. Oxide ores are relatively less amenable to froth flotation and
require a judicious choice of reagents for the recovery of metals to be
optimised. Laboratory batch flotation tests were conducted to
determine the effect of two types of gasoil-rinkalore mixtures on the
flotation response of a copper cobalt oxide ore sample. The head
assay conducted on the initial ore sample showed that it contained
about 2.90% of Cu, 0.12% of Co.
Upon the flotation test work, the results obtained indicated that the
concentrate obtained with use of the mixture gazoil-rinkalore RX
yielded 8.24% Cu and 0.22% Co concentrate grades with recoveries
of 76.0% Cu and 78.0% Co respectively. But, the concentrate
obtained by use of the mixture gazoil-rinkalore RX3 yielded
relatively bad results with 5.92% Cu and 0.18% Cu concentrate
grades with recoveries of 70.3% Cu and 65.3% Co respectively.
Abstract: Software fault prediction models are created by using
the source code, processed metrics from the same or previous version
of code and related fault data. Some company do not store and keep
track of all artifacts which are required for software fault prediction.
To construct fault prediction model for such company, the training
data from the other projects can be one potential solution. Earlier we
predicted the fault the less cost it requires to correct. The training
data consists of metrics data and related fault data at function/module
level. This paper investigates fault predictions at early stage using the
cross-project data focusing on the design metrics. In this study,
empirical analysis is carried out to validate design metrics for cross
project fault prediction. The machine learning techniques used for
evaluation is Naïve Bayes. The design phase metrics of other projects
can be used as initial guideline for the projects where no previous
fault data is available. We analyze seven datasets from NASA
Metrics Data Program which offer design as well as code metrics.
Overall, the results of cross project is comparable to the within
company data learning.
Abstract: The Speexx results revealed four main factors
affecting the success of 190 Thai sophomores as follows: 1) Future
English training should be pursued in applied Speexx development.
2) Thai students didn’t see the benefit of having an Online Language
Training Program. 3) There is a great need to educate the next
generation of learners on the benefits of Speexx within the
community. 4) A great majority of Thai Sophomores didn't know
what Speexx was.
A guideline for self-reliance planning consisted of four aspects: 1)
Development planning: by arranging groups to further improve
English abilities with the Speexx Language Training program and
encourage using Speexx into every day practice. Local communities
need to develop awareness of the usefulness of Speexx and share the
value of using the program among family and friends. 2) Humanities
and Social Science staff should develop skills using this Online
Language Training Program to expand on the benefits of Speexx
within their departments. 3) Further research should be pursued on
the Thai Students progression with Speexx and how it helps them
improve their language skills with Business English. 4) University’s
and Language centers should focus on using Speexx to encourage
learning for any language, not just English.
Abstract: In order to use bitumen in hot mix asphalt, it must
have specific characteristics. There are some methods to reach these
properties. Using polymer modifiers are one of the methods to
modify the bitumen properties. In this paper the effect of Styrene-
Butadiene-Rubber that is one of the bitumen polymer modifiers on
rheology properties of bitumen is studied. In this regard, the
rheological properties of base bitumen and the modified bitumen with
3, 4, and 5 percent of Styrene-Butadiene-Rubber (SBR) were
analysed. The results show that bitumen modified with 5 percent of
SBR has the best performance than the other samples.
Abstract: This paper presents the design and characterization of
analog readout interface circuits for ion sensitive field effect
transistor (ISFET) and ion selective electrode (ISE) based sensor.
These interface circuits are implemented using MIMOS’s 0.35um
CMOS technology and experimentally characterized under 24-leads
QFN package. The characterization evaluates the circuit’s
functionality, output sensitivity and output linearity. Commercial
sensors for both ISFET and ISE are employed together with glass
reference electrode during testing. The test result shows that the
designed interface circuits manage to readout signals produced by
both sensors with measured sensitivity of ISFET and ISE sensor are
54mV/pH and 62mV/decade, respectively. The characterized output
linearity for both circuits achieves above 0.999 Rsquare. The readout
also has demonstrated reliable operation by passing all qualifications
in reliability test plan.
Abstract: The concept of national security in Iran is a
permanently effective factor in acceptance or rejection of many
international obligations. These obligations had been defined
according to the type of legislation of Iran in many aspects.
Therefore, there are several treaties at international level which
requires Iran’s security to come in contact with obligations in these
treaties in a way that an obstacle to join to them and their passage in
parliament. This issue is a typical category which every country pays
attention to be accepted in treaties or to include their national
security in that treaties and also they can see the related treaties from
this perspective, but this issue that 'what is the concept of Iran’s
national security', and 'To what extent it is changed in recent years,
especially after Islamic Revolution' are important issues that can be
criticized. Thus, this study is trying to assess singed treaties from the
perspective of Iran’s national security according of the true meaning
of treaty and to investigate how the international treaties may be in
conflict with Iran’s national security.
Abstract: On the basis of the theory of nonlinear elasticity, the
effect of homogeneous stress on the propagation of Lamb waves in
an initially isotropic hyperelastic plate is analysed. The equations
governing the propagation of small amplitude waves in the prestressed
plate are derived using the theory of small deformations
superimposed on large deformations. By enforcing traction free
boundary conditions at the upper and lower surfaces of the plate,
acoustoelastic dispersion equations for Lamb wave propagation are
obtained, which are solved numerically. Results are given for an
aluminum plate subjected to a range of applied stresses.