Abstract: The protection of groundwater resources is the great
important many semiarid and arid environments. Baghan watershed
is located in the north of Kangan in the Boshehr province in Iran. The
groundwater resources have a vital role in supplying agricultural,
drinking, domestic and industrial water demand in Baghan
watershed. For our investigation into the water quality we collected
30 samples to chemical and physical analysis. The result showed the
marl and evaporation deposits that contain anhydrite and gypsum is
the main source of groundwater pollution, and one part of the
groundwater was polluted by oil and gas industrial. Another part of
the groundwater was contaminated by urban waste water. The
electrical conductivity and captions and anions increased around of
towns and gas refinery. Although the negative impact of untreated
domestic wastewater is relatively low but the results showed strongly
the negative impact of wastewater refinery is very considerable. This
negative impact increased in downstream due to shallow aquifer.
Additionally, the agents that adversely affect the quality of
groundwater come from a variety of sources, including geology,
domestic wastewater and the Jam refinery in Baghan watershed.
Abstract: The ionization energy in semiconductor
systems in nano scale was investigated by using effective mass
approximation. By introducing the Hamiltonian of the system, the
variational technique was employed to calculate the ground state and
the ionization energy of a donor at the center and in the case that the
impurities are randomly distributed inside a cubic quantum well. The
numerical results for GaAs/GaAlAs show that the ionization energy
strongly depends on the well width for both cases and it decreases as
the well width increases. The ionization energy of a quantum wire
was also calculated and compared with the results for the well.
Abstract: To achieve competitive advantage nowadays, most of
the industrial companies are considering that success is sustained to
great product development. That is to manage the product throughout
its entire lifetime ranging from design, manufacture, operation and
destruction. Achieving this goal requires a tight collaboration
between partners from a wide variety of domains, resulting in various
product data types and formats, as well as different software tools. So
far, the lack of a meaningful unified representation for product data
semantics has slowed down efficient product development. This
paper proposes an ontology based approach to enable such semantic
interoperability. Generic and extendible product ontology is
described, gathering main concepts pertaining to the mechanical field
and the relations that hold among them. The ontology is not
exhaustive; nevertheless, it shows that such a unified representation
is possible and easily exploitable. This is illustrated thru a case study
with an example product and some semantic requests to which the
ontology responds quite easily. The study proves the efficiency of
ontologies as a support to product data exchange and information
sharing, especially in product development environments where
collaboration is not just a choice but a mandatory prerequisite.
Abstract: The objective of this work was to examine the
changes in the microstructure and macro physical properties caused
by the carbonation of normalised CEM II mortar. Samples were
prepared and subjected to accelerated carbonation at 20°C, 65%
relative humidity and 20% CO2 concentration. On the microstructure
scale, the evolutions of the cumulative pore volume, pore size
distribution, and specific surface area during carbonation were
calculated from the adsorption desorption isotherms of nitrogen. We
also examined the evolution of macro physical properties such as the
porosity accessible to water, the gas permeability, and thermal
conductivity. The conflict between the results of nitrogen porosity
and water porosity indicated that the porous domains explored using
these two techniques are different and help to complementarily
evaluate the effects of carbonation. This is a multi-scale study where
results on microstructural changes can help to explain the evolution
of macro physical properties.
Abstract: This paper studies the effect of time delay on stability
of mutualism population model with limited resources for both
species. First, the stability of the model without time delay is
analyzed. The model is then improved by considering a time delay in
the mechanism of the growth rate of the population. We analyze the
effect of time delay on the stability of the stable equilibrium point.
Result showed that the time delay can induce instability of the stable
equilibrium point, bifurcation and stability switches.
Abstract: In this paper, an overview of the radio over fiber (RoF) technology is provided. Obstacles for reducing the capital and operational expenses in the existing systems are discussed in various perspectives. Some possible RoF deployment scenarios for WiMAX
data transmission are proposed as a means for capital and operational
expenses reduction. IEEE 802.16a standard based end-to-end physical layer model is simulated including intensity modulated direct detection RoF technology. Finally the feasibility of RoF
technology to carry WiMAX signals between the base station and the
remote antenna units is demonstrated using the simulation results.
Abstract: Antioxidants contribute to endogenous photoprotection
and are important for the maintenance of skin health. The study was carried out to compare the skin hydration and transepidermal
water loss (TEWL) effects of a stable cosmetic preparation
containing flavonoids, following two applications a day over a period
of tenth week. The skin trans-epidermal water loss and skin hydration
effect was measured at the beginning and up to the end of study period of ten weeks. Any effect produced was measured by Corneometer and TEWA meter (Non-invasive probe).
Two formulations were developed for this study design. Formulation one the control formulation in which no apple juice
extract( Flavonoids) was incorporated while second one was the active formulation in which the apple juice extract (3%) containing
flavonoids was incorporated into water in oil emulsion using Abil EM 90 as an emulsifier. Stable formulations (control and Active)
were applied on human cheeks (n = 12) for a study period of 10 weeks. Result of each volunteer of skin hydration and TEWL was
measured by corneometer and TEWA meter. By using ANOVA and Paired sample t test as a statistical evaluation, result of both base and
formulation were compared. Statistical significant results (p≤0.05)
were observed regarding skin hydration and TEWL when two creams, control and Formulation were compared. It showed that
desired formulation (Active) may have interesting application as an
active moisturizing cream on healthy skin.
Abstract: In the present work, study of the vibration of thin cylindrical shells made of a functionally gradient material (FGM) composed of stainless steel and nickel is presented. Material properties are graded in the thickness direction of the shell according to volume fraction power law distribution. The objective is to study the natural frequencies, the influence of constituent volume fractions and the effects of boundary conditions on the natural frequencies of the FG cylindrical shell. The study is carried out using third order shear deformation shell theory. The governing equations of motion of FG cylindrical shells are derived based on shear deformation theory. Results are presented on the frequency characteristics, influence of constituent volume fractions and the effects of free-free boundary conditions.
Abstract: While to minimize the overall project cost is always
one of the objectives of construction managers, to obtain the
maximum economic return is definitely one the ultimate goals of the
project investors. As there is a trade-off relationship between the
project time and cost, and the project delivery time directly affects the
timing of economic recovery of an investment project, to provide a
method that can quantify the relationship between the project delivery
time and cost, and identify the optimal delivery time to maximize
economic return has always been the focus of researchers and
industrial practitioners. Using genetic algorithms, this study
introduces an optimization model that can quantify the relationship
between the project delivery time and cost and furthermore, determine
the optimal delivery time to maximize the economic return of the
project. The results provide objective quantification for accurately
evaluating the project delivery time and cost, and facilitate the
analysis of the economic return of a project.
Abstract: In deregulated operating regime power system security is an issue that needs due thoughtfulness from researchers in the horizon of unbundling of generation and transmission. Electric power systems are exposed to various contingencies. Network contingencies often contribute to overloading of branches, violation of voltages and also leading to problems of security/stability. To maintain the security of the systems, it is desirable to estimate the effect of contingencies and pertinent control measurement can be taken on to improve the system security. This paper presents the application of particle swarm optimization algorithm to find the optimal location of multi type FACTS devices in a power system in order to eliminate or alleviate the line over loads. The optimizations are performed on the parameters, namely the location of the devices, their types, their settings and installation cost of FACTS devices for single and multiple contingencies. TCSC, SVC and UPFC are considered and modeled for steady state analysis. The selection of UPFC and TCSC suitable location uses the criteria on the basis of improved system security. The effectiveness of the proposed method is tested for IEEE 6 bus and IEEE 30 bus test systems.
Abstract: A new algorithm called Character-Comparison to
Character-Access (CCCA) is developed to test the effect of both: 1)
converting character-comparison and number-comparison into
character-access and 2) the starting point of checking on the
performance of the checking operation in string searching. An
experiment is performed; the results are compared with five
algorithms, namely, Naive, BM, Inf_Suf_Pref, Raita, and Circle.
With the CCCA algorithm, the results suggest that the evaluation
criteria of the average number of comparisons are improved up to
74.0%. Furthermore, the results suggest that the clock time required
by the other algorithms is improved in range from 28% to 68% by the
new CCCA algorithm
Abstract: Retinal prostheses have been successful in eliciting
visual responses in implanted subjects. As these prostheses progress,
one of their major limitations is the need for increased resolution. As
an alternative to increasing the number of electrodes, virtual
electrodes may be used to increase the effective resolution of current
electrode arrays. This paper presents a virtual electrode technique
based upon time-offsets between stimuli. Two adjacent electrodes are
stimulated with identical pulses with too short of pulse widths to
activate a neuron, but one has a time offset of one pulse width. A
virtual electrode of twice the pulse width was then shown to appear in
the center, with a total width capable of activating a neuron. This can
be used in retinal implants by stimulating electrodes with pulse
widths short enough to not elicit responses in neurons, but with their
combined pulse width adequate to activate a neuron in between them.
Abstract: With a growing number of digital libraries and other
open education repositories being made available throughout the
world, effective search and retrieval tools are necessary to access the
desired materials that surpass the effectiveness of traditional, allinclusive
search engines. This paper discusses the design and use of
Folksemantic, a platform that integrates OpenCourseWare search,
Open Educational Resource recommendations, and social network
functionality into a single open source project. The paper describes
how the system was originally envisioned, its goals for users, and
data that provides insight into how it is actually being used. Data
sources include website click-through data, query logs, web server
log files and user account data. Based on a descriptive analysis of its
current use, modifications to the platform's design are recommended
to better address goals of the system, along with recommendations
for additional phases of research.
Abstract: Post-disaster reconstruction projects offer
opportunities to facilitate physical, social and economic development
and to reduce future hazard vulnerability long after the disasters.
Sustainability of post-disaster reconstruction project conducted in the
villages of Dinar following the 1995 earthquake was investigated in
this paper. Officials of the Government who were involved in the
project were interviewed. Besides, two field surveys were done in 12
villages of Dinar in winter months of 2008. Beneficiaries were
interviewed and physical, socio-cultural and economic impacts of the
reconstruction were examined. The research revealed that the postdisaster
reconstruction project has negative aspects from the point
view of sustainability. The physical, socio-cultural and economic
factors were not considered during decision making process of the
project.
Abstract: With a rapid growth in 3D graphics technology over the last few years, people are desired to see more flexible reacting motions of a biped in animations. In particular, it is impossible to anticipate all reacting motions of a biped while facing a perturbation. In this paper, we propose a three-level tracking method for animating a 3D humanoid character. First, we take the laws of physics into account to attach physical attributes, such as mass, gravity, friction, collision, contact, and torque, to bones and joints of a character. The next step is to employ PD controller to follow a reference motion as closely as possible. Once the character cannot tolerate a strong perturbation to prevent itself from falling down, we are capable of tracking a desirable falling-down action to avoid any falling condition inaccuracy. From the experimental results, we demonstrate the effectiveness and flexibility of the proposed method in comparison with conventional data-driven approaches.
Abstract: the article analyzes the national security as a scientific and practical problem, characterized by the state's political institutions to ensure effective action to maintain optimal conditions for the existence and development of the individual and society. National security, as a category of political science reflects the relationship between the security to the nation, including public relations and social consciousness, social institutions and their activities, ensuring the realization of national interests in a particular historical situation. In national security are three security levels: individual, society and state. Their role and place determined by the nature of social relations, political systems, the presence of internal and external threats. In terms of content in the concept of national security is taken to provide political, economic, military, environmental, information security and safety of the cultural development of the nation.
Abstract: Non-premixed turbulent combustion Computational Fluid Dynamics (CFD) has been carried out in a simplified methanefuelled coaxial jet combustor employing Large Eddy Simulation (LES). The objective of this study is to evaluate the performance of LES in modelling non-premixed combustion using a commercial software, FLUENT, and investigate the effects of the grid density and chemistry models employed on the accuracy of the simulation results. A comparison has also been made between LES and Reynolds Averaged Navier-Stokes (RANS) predictions. For LES grid sensitivity test, 2.3 and 6.2 million cell grids are employed with the equilibrium model. The chemistry model sensitivity analysis is achieved by comparing the simulation results from the equilibrium chemistry and steady flamelet models. The predictions of the mixture fraction, axial velocity, species mass fraction and temperature by LES are in good agreement with the experimental data. The LES results are similar for the two chemistry models but influenced considerably by the grid resolution in the inner flame and near-wall regions.
Abstract: Under the variation of crude oil price and the impact of
greenhouse effect, it is urgent to find a potential alternative fuel.
Among these alternative fuels, non edible plant oils are the most
potential ones, because they don-t have the problem of food and
cropland competitions. Among the non-edible plant oils, Jatropha oil
is the most potential one. Jatropha oil is non-eatable oil and has good
oil quality and low temperature performance. It has potential to
become one of the most competitive biomass crude oils. The crude
plant oil will be blended with diesel fuel to be tested in a power
generator. The international collaboration between Taiwan and
Indonesia on the production of Jatropha in Indonesia will also be
presented in this study.
Abstract: The significance of environmental protection is wellknown in today's world. The execution of any program depends on sufficient knowledge and required familiarity with environment and its pollutants. Taking advantage of a systematic method, as a new science, in environmental planning can solve many problems. In this article, air pollution in Tehran and its relationship with health and population growth have been analyzed using dynamic systems. Firstly, by using casual loops, the relationship between the parameters effective on air pollution in Tehran were taken into consideration, then these casual loops were turned into flow diagrams [6], and finally, they were simulated using the software Vensim [16]in order to conclude what the effect of each parameter will be on air pollution in Tehran in the next 10 years, how changing of one or more parameters influences other parameters, and which parameter among all other parameters requires to be controlled more.
Abstract: The optimal control is one of the possible controllers
for a dynamic system, having a linear quadratic regulator and using
the Pontryagin-s principle or the dynamic programming method .
Stochastic disturbances may affect the coefficients (multiplicative
disturbances) or the equations (additive disturbances), provided that
the shocks are not too great . Nevertheless, this approach encounters
difficulties when uncertainties are very important or when the probability
calculus is of no help with very imprecise data. The fuzzy
logic contributes to a pragmatic solution of such a problem since it
operates on fuzzy numbers. A fuzzy controller acts as an artificial
decision maker that operates in a closed-loop system in real time.
This contribution seeks to explore the tracking problem and control
of dynamic macroeconomic models using a fuzzy learning algorithm.
A two inputs - single output (TISO) fuzzy model is applied to the
linear fluctuation model of Phillips and to the nonlinear growth model
of Goodwin.