Abstract: In Image processing the Image compression can improve
the performance of the digital systems by reducing the cost and
time in image storage and transmission without significant reduction
of the Image quality. This paper describes hardware architecture of
low complexity Discrete Cosine Transform (DCT) architecture for
image compression[6]. In this DCT architecture, common computations
are identified and shared to remove redundant computations
in DCT matrix operation. Vector processing is a method used for
implementation of DCT. This reduction in computational complexity
of 2D DCT reduces power consumption. The 2D DCT is performed
on 8x8 matrix using two 1-Dimensional Discrete cosine transform
blocks and a transposition memory [7]. Inverse discrete cosine
transform (IDCT) is performed to obtain the image matrix and
reconstruct the original image. The proposed image compression
algorithm is comprehended using MATLAB code. The VLSI design
of the architecture is implemented Using Verilog HDL. The proposed
hardware architecture for image compression employing DCT was
synthesized using RTL complier and it was mapped using 180nm
standard cells. . The Simulation is done using Modelsim. The
simulation results from MATLAB and Verilog HDL are compared.
Detailed analysis for power and area was done using RTL compiler
from CADENCE. Power consumption of DCT core is reduced to
1.027mW with minimum area[1].
Abstract: Mercury is a natural occurring element and present in
various concentrations in the environment. Due to its toxic effects, it
is desirable to research mercury sensitive materials to adsorb
mercury. This paper describes the preparation of Au nanoparticles for
mercury adsorption by using a microwave (MW)-polyol method in
the presence of three different Sodium Chloride (NaCl)
concentrations (10, 20 and 30 mM). Mixtures of spherical, triangular,
octahedral, decahedral particles and 1-D product were obtained using
this rapid method. Sizes and shapes was found strongly depend on the
concentrations of NaCl. Without NaCl concentration, spherical,
triangular plates, octahedral, decahedral nanoparticles and 1D
product were produced. At the lower NaCl concentration (10 mM),
spherical, octahedral and decahedral nanoparticles were present,
while spherical and decahedral nanoparticles were preferentially form
by using 20 mM of NaCl concentration. Spherical, triangular plates,
octahedral and decahedral nanoparticles were obtained at the highest
NaCl concentration (30 mM). The amount of mercury adsorbed using
20 ppm mercury solution is the highest (67.5 %) for NaCl
concentration of 30 mM. The high yield of polygonal particles will
increase the mercury adsorption. In addition, the adsorption of
mercury is also due to the sizes of the particles. The sizes of particles
become smaller with increasing NaCl concentrations (size ranges, 5-
16 nm) than those synthesized without addition of NaCl (size ranges
11-32 nm). It is concluded that NaCl concentrations affects the
formation of sizes and shapes of Au nanoparticles thus affects the
mercury adsorption.
Abstract: An experiment was conducted to determine the effect
of the rearing system on growth performance, carcass yield,
hematological parameters, and feather pecking damage of Thai
indigenous chickens. Three hundred and sixty 1-d-old chicks were
randomly assigned to 2 treatments: indoor treatment and outdoor
access treatment. In the indoor treatment, the chickens were housed
in floor pens (5 birds/m2). In the outdoor access treatment, the
chickens were housed in a similar indoor house; in addition, they also
had an outdoor grass paddock (1 bird/m2). All birds were provided
with same diet and were raised for 16 wk of age. The results showed
that growth performance and carcass yield were not different among
treatment (P>0.05). Outdoor access had no effect on hematological
parameters (P>0.05). However, the feather pecking damage of the
chickens in the outdoor access treatment was lower than that of the
chickens in the indoor treatment (P
Abstract: In this paper optical code-division multiple-access (OCDMA) packet network is considered, which offers inherent security in the access networks. Two types of random access protocols are proposed for packet transmission. In protocol 1, all distinct codes and in protocol 2, distinct codes as well as shifted versions of all these codes are used. O-CDMA network performance using optical orthogonal codes (OOCs) 1-D and two-dimensional (2-D) wavelength/time single-pulse-per-row (W/T SPR) codes are analyzed. The main advantage of using 2-D codes instead of onedimensional (1-D) codes is to reduce the errors due to multiple access interference among different users. In this paper, correlation receiver is considered in the analysis. Using analytical model, we compute and compare packet-success probability for 1-D and 2-D codes in an O-CDMA network and the analysis shows improved performance with 2-D codes as compared to 1-D codes.
Abstract: This paper is concerned with the numerical minimization
of energy functionals in BV (
) (the space of bounded variation
functions) involving total variation for gray-scale 1-dimensional inpainting
problem. Applications are shown by finite element method
and discontinuous Galerkin method for total variation minimization.
We include the numerical examples which show the different recovery
image by these two methods.
Abstract: Since the driving speed and control accuracy of
commercial optical disk are increasing significantly, it needs an
efficient controller to monitor the track seeking and following
operations of the servo system for achieving the desired data
extracting response. The nonlinear behaviors of the actuator and servo
system of the optical disk drive will influence the laser spot
positioning. Here, the model-free fuzzy control scheme is employed to
design the track seeking servo controller for a d.c. motor driving
optical disk drive system. In addition, the sliding model control
strategy is introduced into the fuzzy control structure to construct a
1-D adaptive fuzzy rule intelligent controller for simplifying the
implementation problem and improving the control performance. The
experimental results show that the steady state error of the track
seeking by using this fuzzy controller can maintain within the track
width (1.6 μm ). It can be used in the track seeking and track
following servo control operations.
Abstract: This paper describes a one-dimensional numerical model for natural gas production from the dissociation of methane hydrate in hydrate-capped gas reservoir under depressurization and thermal stimulation. Some of the hydrate reservoirs discovered are overlying a free-gas layer, known as hydrate-capped gas reservoirs. These reservoirs are thought to be easiest and probably the first type of hydrate reservoirs to be produced. The mathematical equations that can be described this type of reservoir include mass balance, heat balance and kinetics of hydrate decomposition. These non-linear partial differential equations are solved using finite-difference fully implicit scheme. In the model, the effect of convection and conduction heat transfer, variation change of formation porosity, the effect of using different equations of state such as PR and ER and steam or hot water injection are considered. In addition distributions of pressure, temperature, saturation of gas, hydrate and water in the reservoir are evaluated. It is shown that the gas production rate is a sensitive function of well pressure.
Abstract: In this paper, we have combined some spatial derivatives with the optimised time derivative proposed by Tam and Webb in order to approximate the linear advection equation which is given by = 0. Ôêé Ôêé + Ôêé Ôêé x f t u These spatial derivatives are as follows: a standard 7-point 6 th -order central difference scheme (ST7), a standard 9-point 8 th -order central difference scheme (ST9) and optimised schemes designed by Tam and Webb, Lockard et al., Zingg et al., Zhuang and Chen, Bogey and Bailly. Thus, these seven different spatial derivatives have been coupled with the optimised time derivative to obtain seven different finite-difference schemes to approximate the linear advection equation. We have analysed the variation of the modified wavenumber and group velocity, both with respect to the exact wavenumber for each spatial derivative. The problems considered are the 1-D propagation of a Boxcar function, propagation of an initial disturbance consisting of a sine and Gaussian function and the propagation of a Gaussian profile. It is known that the choice of the cfl number affects the quality of results in terms of dissipation and dispersion characteristics. Based on the numerical experiments solved and numerical methods used to approximate the linear advection equation, it is observed in this work, that the quality of results is dependent on the choice of the cfl number, even for optimised numerical methods. The errors from the numerical results have been quantified into dispersion and dissipation using a technique devised by Takacs. Also, the quantity, Exponential Error for Low Dispersion and Low Dissipation, eeldld has been computed from the numerical results. Moreover, based on this work, it has been found that when the quantity, eeldld can be used as a measure of the total error. In particular, the total error is a minimum when the eeldld is a minimum.
Abstract: Biochemical investigations were carried out to assess
the effect of different exposure regimes of Kazakhstan crude oil
(KCO) on hepatic antioxidant defense system in albino rats.
Contaminants were delivered under two different dosing regimes,
with all treatments receiving the same total contaminant load by the
end of the exposure period. Rats in regime A injected with KCO
once at a dose of 6 ml/kg bw while in regime B injected multiply at a
dose of 1.5 ml/kg bw on day 1, 3, 5 and 8. Antioxidant biomarkers
were measured in hepatic tissue after 1, 3, 5 and 8 days. Significant
induction was observed in serum aminotransferases (ALT, AST)
(p
Abstract: Dengue, a disease found in most tropical and
subtropical areas of the world. It has become the most common
arboviral disease of humans. This disease is caused by any of four
serotypes of dengue virus (DEN1-DEN4). In many endemic
countries, the average age of getting dengue infection is shifting
upwards, dengue in pregnancy and infancy are likely to be
encountered more frequently. The dynamics of the disease is studied
by a compartmental model involving ordinary differential equations
for the pregnant, infant human and the vector populations. The
stability of each equilibrium point is given. The epidemic dynamic is
discussed. Moreover, the numerical results are shown for difference
values of dengue antibody.
Abstract: A feeding trial was conducted to investigate the effect
of periodically use of garlic on performance and carcass
characteristics in broiler chickens. 240 1-day-old Ross broiler chicks
randomly allocated into the 10 dietary treatments (A, B, C, D, E, F,
G, H, I and J) for 6 wk. Treatment A or control group, received basal
diet (based on standards of Ross management guidelines) without
supplementation of garlic powder while B, C and D dietary
treatments were basal diet supplemented with 0.5, 1 and 3% garlic
powder, respectively for the whole time of experiment (6 weeks).
Birds in group E, F and G were fed control diet supplemented with
0.5, 1 and 3% garlic powder, respectively just in their starter diet (0-
21d). Birds in three other treatments (H, I and J) received control diet
for the first 21 days and 0.5, 1 and 3% of garlic powder was added to
their finisher diets, respectively. 1 and 3% supplemented groups in
finisher period had better performance as compared with other
groups. Since present study conducted in optimum and antiseptic
conditions, it seems that better or more responses could be expected
in performance if the raising conditions would not be healthy.
Abstract: Electrocardiogram (ECG) data compression algorithm
is needed that will reduce the amount of data to be transmitted, stored
and analyzed, but without losing the clinical information content. A
wavelet ECG data codec based on the Set Partitioning In Hierarchical
Trees (SPIHT) compression algorithm is proposed in this paper. The
SPIHT algorithm has achieved notable success in still image coding.
We modified the algorithm for the one-dimensional (1-D) case and
applied it to compression of ECG data.
By this compression method, small percent root mean square
difference (PRD) and high compression ratio with low
implementation complexity are achieved. Experiments on selected
records from the MIT-BIH arrhythmia database revealed that the
proposed codec is significantly more efficient in compression and in
computation than previously proposed ECG compression schemes.
Compression ratios of up to 48:1 for ECG signals lead to acceptable
results for visual inspection.
Abstract: A 2.4GHz (RF) down conversion Gilbert Cell mixer,
implemented in a 0.18-μm CMOS technology with a 1.8V supply, is
presented. Current bleeding (charge injection) technique has been
used to increase the conversion gain and the linearity of the mixer.
The proposed mixer provides 10.75 dB conversion gain ( C G ) with
14.3mw total power consumption. The IIP3 and 1-dB compression
point of the mixer are 8dbm and -4.6dbm respectively, at 300 MHz
IF frequencies. Comparing the current design against the
conventional mixer design, demonstrates better performance in the
conversion gain, linearity, noise figure and port-to-port isolation.
Abstract: In this paper, study on carbonation process of several types of advanced plasters on lime basis is presented. The movement of carbonation head was measured by colorimetric method using phenolphtalein. The rate of carbonation was accessed also by gravimetric method. Samples of studied materials were placed into the climatic chamber for simulation of environment with high concentration of CO2. The particular samples were on all lateral sides and on the bottom side provided by epoxy resin in order to arrange 1-D transport of CO2 into the studied samples. The carbonation rates of particular materials pointed to the time dependence of diffusion process of CO2 for all the studied plasters. From the quantitative point of view, the carbonation of advanced modified plasters was much faster than for the reference lime plaster, what is beneficial for the practical application of the tested newly developed materials.
Abstract: The potential of antioxidant activities of the plant
extract Gynura procumbens, Achyranthes aspera and Polygenum
tomentosum were studied by using 1, 1-diphenyl-2-picrylhydrazyl
(DPPH) .Antioxidant activity was qualitatively and quantitatively
determined. In this analysis , Ascorbic acid (Vitamin C) was used as
the standard .The antioxidant activities were observed all three plant
extracts and the EC50 values of G procumbens A.aspera and
P.tomemtosum were 13.7 μg /ml,14.37 μg /ml and 14.35 μg /ml.
Among these plants, G.procumbens is more potent antioxidant
activity then others. Antitumor activities were found with A.aspera
(s2) extracts in the dose of 100ppm in carrot disks and G.procumbens
(s1) and P.tomentosum (s3) in the dose of 1000 ppm. Therefore, these
herbal plants are used in traditional medicines.
Abstract: Traditional object segmentation methods are time consuming and computationally difficult. In this paper, onedimensional object detection along the secant lines is applied. Statistical features of texture images are computed for the recognition process. Example matrices of these features and formulae for calculation of similarities between two feature patterns are expressed. And experiments are also carried out using these features.
Abstract: This paper describes the crashworthiness assessment and improvement of tlting train made of sandwich composites. The crashworhiness assessment of tilting train was conducted according to four collision scenarios of the Korean railway safety law. Collision analysis was carried out using explicit finite element analysis code LS-DYNA 3D. The finite element model consists of 3-D finite element model and 1-D equivalent model to save the finite element modeling and calculation time. It found that the crashworthiness analysis results were satisfied with the performance requirements except the crash scenario-2. In order to meet the crashworthiness requirements for crash scenario-2, the stiffness reinforcement for the laminate composite cover and metal frames of cabmask structure were proposed. Consequentially, it has satisfied the requirement for crash scenario-2.