Abstract: This paper develops driver reaction-time models for
car-following analysis based on human factors. The reaction time
was classified as brake-reaction time (BRT) and
acceleration/deceleration reaction time (ADRT). The BRT occurs
when the lead vehicle is barking and its brake light is on, while the
ADRT occurs when the driver reacts to adjust his/her speed using the
gas pedal only. The study evaluates the effect of driver
characteristics and traffic kinematic conditions on the driver reaction
time in a car-following environment. The kinematic conditions
introduced urgency and expectancy based on the braking behaviour
of the lead vehicle at different speeds and spacing. The kinematic
conditions were used for evaluating the BRT and are classified as
normal, surprised, and stationary. Data were collected on a driving
simulator integrated into a real car and included the BRT and ADRT
(as dependent variables) and driver-s age, gender, driving experience,
driving intensity (driving hours per week), vehicle speed, and
spacing (as independent variables). The results showed that there was
a significant difference in the BRT at normal, surprised, and
stationary scenarios and supported the hypothesis that both urgency
and expectancy had significant effects on BRT. Driver-s age, gender,
speed, and spacing were found to be significant variables for the
BRT in all scenarios. The results also showed that driver-s age and
gender were significant variables for the ADRT. The research
presented in this paper is part of a larger project to develop a driversensitive
in-vehicle rear-end collision warning system.
Abstract: This paper identifies five key design characteristics of
production scheduling software systems in printed circuit board (PCB) manufacturing. The authors consider that, in addition to an effective scheduling engine, a scheduling system should be able to
process a preventative maintenance calendar, to give the user the
flexibility to handle data using a variety of electronic sources, to run
simulations to support decision-making, and to have simple and
customisable graphical user interfaces. These design considerations
were the result of a review of academic literature, the evaluation of
commercial applications and a compilation of requirements of a PCB manufacturer. It was found that, from those systems that were evaluated, those that effectively addressed all five characteristics
outlined in this paper were the most robust of all and could be used in
PCB manufacturing.
Abstract: Short circuit currents plays a vital role in influencing the design and operation of equipment and power system and could not be avoided despite careful planning and design, good maintenance and thorough operation of the system. This paper discusses the short circuit analysis conducted in KSO briefly comprising of its significances, methods and results. A result sample of the analysis based on a single transformer is detailed in this paper. Furthermore, the results of the analysis and its significances were also discussed and commented.
Abstract: Power-line networks are widely used today for broadband data transmission. However, due to multipaths within the broadband power line communication (BPLC) systems owing to stochastic changes in the network load impedances, branches, etc., network or channel capacity performances are affected. This paper attempts to investigate the performance of typical medium voltage channels that uses Orthogonal Frequency Division Multiplexing (OFDM) techniques with Quadrature Amplitude Modulation (QAM) sub carriers. It has been observed that when the load impedances are different from line characteristic impedance channel performance decreases. Also as the number of branches in the link between the transmitter and receiver increases a loss of 4dB/branch is found in the signal to noise ratio (SNR). The information presented in the paper could be useful for an appropriate design of the BPLC systems.
Abstract: Linear stability of wake-shear layers in two-phase
shallow flows is analyzed in the present paper. Stability analysis is
based on two-dimensional shallow water equations. It is assumed that
the fluid contains uniformly distributed solid particles. No dynamic
interaction between the carrier fluid and particles is expected in the
initial moment. Linear stability curves are obtained for different
values of the particle loading parameter, the velocity ratio and the
velocity deficit. It is shown that the increase in the velocity ratio
destabilizes the flow. The particle loading parameter has a stabilizing
effect on the flow. The role of the velocity deficit is also
destabilizing: the increase of the velocity deficit leads to less stable
flow.
Abstract: This research focuses on the use of a recommender
system in decision support by means of a used car dealer case study
in Bangkok Metropolitan. The goal is to develop an effective used car
purchasing system for dealers based on the above premise. The
underlying principle rests on content-based recommendation from a
set of usability surveys. A prototype was developed to conduct
buyers- survey selected from 5 experts and 95 general public. The
responses were analyzed to determine the mean and standard
deviation of buyers- preference. The results revealed that both groups
were in favor of using the proposed system to assist their buying
decision. This indicates that the proposed system is meritorious to
used car dealers.
Abstract: Standards for learning objects focus primarily on
content presentation. They were already extended to support automatic evaluation but it is limited to exercises with a predefined
set of answers. The existing standards lack the metadata required by specialized evaluators to handle types of exercises with an indefinite
set of solutions. To address this issue existing learning object standards were extended to the particular requirements of a
specialized domain. A definition of programming problems as learning objects, compatible both with Learning Management Systems and with systems performing automatic evaluation of
programs, is presented in this paper. The proposed definition includes
metadata that cannot be conveniently represented using existing standards, such as: the type of automatic evaluation; the requirements
of the evaluation engine; and the roles of different assets - tests cases, program solutions, etc. The EduJudge project and its main services
are also presented as a case study on the use of the proposed definition of programming problems as learning objects.
Abstract: Polymers are one of the most widely used materials in our every day life. The subject of renewable resources has attracted great attention in the last period of time. New polymeric materials derived from renewable resources, like carbohydrates draw attention to public eye especially because of their biocompatibility and biodegradability. The aim of our paper was to obtain environmentally compatible polymers from monosaccharides. Novel glycopolymers based on D-glucose have been obtained from copolymerization of a new monomer carrying carbohydrate moiety with methyl methacrylate (MMA) via free radical bulk polymerization. Differential scanning calorimetry (DSC) was performed in order to study the copolymerization process of the monomer into the chosen co-monomer; the activation energy of this process was evaluated using Ozawa method. The copolymers obtained were characterized using ATR-FTIR spectroscopy. The thermal stability of the obtained products was studied by thermogravimetry (TG).
Abstract: The research study is carried out to determine the efficiency of the Biofilm sewage treatment plant which is located at the Engineering Complex-s. Wastewater analyses have been carried out at the Environmental Engineering laboratory to study the six parameters: Biochemical Oxygen Demand BOD, Chemical Oxygen Demand COD l, and Total Suspended Solids TSS, Ammoniac Nitrogen NH3-N and Phosphorous P which have been selected to determine the wastewater quality. The plant was designed to treat 750 Pe (population equivalent) at hydraulic retention time of 5 hours in the aerobic zone. The results show that Biofilm wastewater treatment plant was able to treat sewage successfully at different flow condition. The discharge has fulfilled the Malaysia Environmental of Standard A water quality. The achieved BOD removal is more than 85%, COD is more than 80%, TSS is more than 80%, NH3-N is more than 70%, and P was more than 70%. The Biofilm system provides a very efficient process for sewage treatment and it is compact in structure thus minimizes the required land area.
Abstract: This study applies the sequential panel selection
method (SPSM) procedure proposed by Chortareas and Kapetanios
(2009) to investigate the time-series properties of energy
consumption in 50 US states from 1963 to 2009. SPSM involves the
classification of the entire panel into a group of stationary series and
a group of non-stationary series to identify how many and which
series in the panel are stationary processes. Empirical results obtained
through SPSM with the panel KSS unit root test developed by Ucar
and Omay (2009) combined with a Fourier function indicate that
energy consumption in all the 50 US states are stationary. The results
of this study have important policy implications for the 50 US states.
Abstract: A study was carried out at the Rice Research Institute of Iran (RRII) to investigate the effect of rollers differential peripheral speed of commercial rubber roll husker and paddy moisture content on the husking index and percentage of broken rice. The experiment was conducted at six levels of rollers differential speed (1.5, 2.2, 2.9, 3.6, 4.3 and 5 m/s) and three levels of paddy moisture content (8-9, 10-11 and 12-13% w.b.). Two common paddy varieties namely, Binam and Khazer, were selected for this study. Results revealed that the effect of rollers differential speed and moisture content significantly (P
Abstract: In this paper, experimental testing and numerical analysis were used to investigate the effect of tube thickness on the face bending for concrete filled hollow sections connected to other structural members using Extended Hollobolts. Six samples were tested experimentally by applying pull-out load on the bolts. These samples were designed to fail by column face bending. The main variable in all tests is the column face thickness. Finite element analyses were also performed using ABAQUS 6.11 to extend the experimental results and to quantify the effect of column face thickness. Results show that, the column face thickness has a clear impact on the connection strength and stiffness. However, the amount of improvement in the connection stiffness by changing the column face thickness from 5mm to 6.3mm seems to be higher than that when increasing it from 6.3mm to 8mm. The displacement at which the bolts start pulling-out from their holes increased with the use of thinner column face due to the high flexibility of the section. At the ultimate strength, the yielding of the column face propagated to the column corner and there was no yielding in its walls. After the ultimate resistance is reached, the propagation of the yielding was mainly in the column face with a miner yielding in the walls.
Abstract: Electrocardiogram (ECG) data compression algorithm
is needed that will reduce the amount of data to be transmitted, stored
and analyzed, but without losing the clinical information content. A
wavelet ECG data codec based on the Set Partitioning In Hierarchical
Trees (SPIHT) compression algorithm is proposed in this paper. The
SPIHT algorithm has achieved notable success in still image coding.
We modified the algorithm for the one-dimensional (1-D) case and
applied it to compression of ECG data.
By this compression method, small percent root mean square
difference (PRD) and high compression ratio with low
implementation complexity are achieved. Experiments on selected
records from the MIT-BIH arrhythmia database revealed that the
proposed codec is significantly more efficient in compression and in
computation than previously proposed ECG compression schemes.
Compression ratios of up to 48:1 for ECG signals lead to acceptable
results for visual inspection.
Abstract: Gradual patterns have been studied for many years as
they contain precious information. They have been integrated in
many expert systems and rule-based systems, for instance to reason
on knowledge such as “the greater the number of turns, the greater
the number of car crashes”. In many cases, this knowledge has been
considered as a rule “the greater the number of turns → the greater
the number of car crashes” Historically, works have thus been
focused on the representation of such rules, studying how implication
could be defined, especially fuzzy implication. These rules were
defined by experts who were in charge to describe the systems they
were working on in order to turn them to operate automatically. More
recently, approaches have been proposed in order to mine databases
for automatically discovering such knowledge. Several approaches
have been studied, the main scientific topics being: how to determine
what is an relevant gradual pattern, and how to discover them as
efficiently as possible (in terms of both memory and CPU usage).
However, in some cases, end-users are not interested in raw level
knowledge, and are rather interested in trends. Moreover, it may be
the case that no relevant pattern can be discovered at a low level of
granularity (e.g. city), whereas some can be discovered at a higher
level (e.g. county). In this paper, we thus extend gradual pattern
approaches in order to consider multiple level gradual patterns. For
this purpose, we consider two aggregation policies, namely
horizontal and vertical.
Abstract: Multicarrier code-division multiple-access is one of the
effective techniques to gain its multiple access capability, robustness
against fading, and to mitigate the ISI. In this paper, we propose an
improved mulcarrier CDMA system with adaptive subchannel
allocation. We analyzed the performance of our proposed system in
frequency selective fading environment with narrowband interference
existing and compared it with that of parallel transmission over many
subchannels (namely, conventional MC-CDMA scheme) and
DS-CDMA system. Simulation results show that adaptive subchannel
allocation scheme, when used in conventional multicarrier CDMA
system, the performance will be greatly improved.
Abstract: An innovative approach utilizing highly alkaline oil
shale waste ash and carbon dioxide gas (CO2), associated with power
production, as a resource for production of precipitated calcium
carbonate (PCC) is introduced in this paper. The specifics and
feasibility of the integrated ash valorization and CO2 sequestration
process by indirect aqueous carbonation of lime-consisting ash were
elaborated and the main parameters established. Detailed description
of the formed precipitates was included. Complimentary carbonation
experiments with commercial CaO fine powder were conducted for
comparative characterization of the final products obtained on the
basis of two different raw materials. Finally, the expected CO2
uptake was evaluated.
Abstract: Radio Frequency Identification (RFID) initially introduced
during WW-II, has revolutionized the world with its numerous
benefits and plethora of implementations in diverse areas ranging
from manufacturing to agriculture to healthcare to hotel management.
This work reviews the current research in this area with emphasis
on applications for supply chain management and to develop a
taxonomic framework to classify literature which will enable swift
and easy content analysis and also help identify areas for future
research.
Abstract: In this study, we investigated the effects of ginger and
L-carnitine on the reproductive performance of male rats with respect
to semen parameters, male sex hormones and the testicular
antioxidant system. A total of sixty mature male albino rats were
divided into four groups of fifteen rats. The control group received
saline, whereas the other three groups received ginger (100 mg kg-1 d-
1.), L-carnitine (150 mg kg-1 d-1.) or a combination of both ginger
(100 mg kg-1 d-1.) and L-carnitine (150 mg kg-1 d-1.) via a stomach
tube daily for one month. At the end of the treatment period, the rats
were sacrificed, and their sperm characteristics (count, motility and
viability), antioxidant enzyme factors levels (reduced glutathione,
catalase, superoxide dismutase and total antioxidant capacity) and sex
hormone levels (testosterone, Follicle stimulating hormone(FSH) and
luteinizing hormone (LH) were analysed. Our results showed that the
three experimental treatments improved sperm parameters,
antioxidant enzyme activity and testosterone hormone levels; the
most pronounced positive effects were observed in the group that
received a combination of both ginger and L-carnitine. Therefore, the
administration of a combination of ginger and L-carnitine may be
beneficial for improving male sexual performance.
Abstract: ECG analysis method was developed using ROC
analysis of PVC detecting algorithm. ECG signal of MIT-BIH
arrhythmia database was analyzed by MATLAB. First of all, the
baseline was removed by median filter to preprocess the ECG signal.
R peaks were detected for ECG analysis method, and normal VCG
was extracted for VCG analysis method. Four PVC detecting
algorithm was analyzed by ROC curve, which parameters are
maximum amplitude of QRS complex, width of QRS complex, r-r
interval and geometric mean of VCG. To set cut-off value of
parameters, ROC curve was estimated by true-positive rate
(sensitivity) and false-positive rate. sensitivity and false negative rate
(specificity) of ROC curve calculated, and ECG was analyzed using
cut-off value which was estimated from ROC curve. As a result, PVC
detecting algorithm of VCG geometric mean have high availability,
and PVC could be detected more accurately with amplitude and width
of QRS complex.
Abstract: Erroneous computer entry problems [here: 'e'errors] in hospital labs threaten the patients-–health carers- relationship, undermining the health system credibility. Are e-errors random, and do lab professionals make them accidentally, or may they be traced through meaningful determinants? Theories on internal causality of mistakes compel to seek specific causal ascriptions of hospital lab eerrors instead of accepting some inescapability. Undeniably, 'To Err is Human'. But in view of rapid global health organizational changes, e-errors are too expensive to lack in-depth considerations. Yet, that efunction might supposedly be entrenched in the health carers- job description remains under dispute – at least for Hellenic labs, where e-use falls behind generalized(able) appreciation and application. In this study: i) an empirical basis of a truly high annual cost of e-errors at about €498,000.00 per rural Hellenic hospital was established, hence interest in exploring the issue was sufficiently substantiated; ii) a sample of 270 lab-expert nurses, technicians and doctors were assessed on several personality, burnout and e-error measures, and iii) the hypothesis that the Hardiness vs Alienation personality construct disposition explains resistance vs proclivity to e-errors was tested and verified: Hardiness operates as a resilience source in the encounter of high pressures experienced in the hospital lab, whereas its 'opposite', i.e., Alienation, functions as a predictor, not only of making e-errors, but also of leading to burn-out. Implications for apt interventions are discussed.