Abstract: High speed networks provide realtime variable bit rate
service with diversified traffic flow characteristics and quality
requirements. The variable bit rate traffic has stringent delay and
packet loss requirements. The burstiness of the correlated traffic
makes dynamic buffer management highly desirable to satisfy the
Quality of Service (QoS) requirements. This paper presents an
algorithm for optimization of adaptive buffer allocation scheme for
traffic based on loss of consecutive packets in data-stream and buffer
occupancy level. Buffer is designed to allow the input traffic to be
partitioned into different priority classes and based on the input
traffic behavior it controls the threshold dynamically. This algorithm
allows input packets to enter into buffer if its occupancy level is less
than the threshold value for priority of that packet. The threshold is
dynamically varied in runtime based on packet loss behavior. The
simulation is run for two priority classes of the input traffic –
realtime and non-realtime classes. The simulation results show that
Adaptive Partial Buffer Sharing (ADPBS) has better performance
than Static Partial Buffer Sharing (SPBS) and First In First Out
(FIFO) queue under the same traffic conditions.
Abstract: This paper presents the significant factor and give
some suggestion that should know before design. The main objective of this paper is guide the first step for someone who attends to design of grounding system before study in details later. The overview of
grounding system can protect damage from fault such as can save a human life and power system equipment. The unsafe conditions have
three cases. Case 1) maximum touch voltage exceeds the safety
criteria. In this case, the conductor compression ratio of the ground gird should be first adjusted to have optimal spacing of ground grid
conductors. If it still over limit, earth resistivity should be consider afterward. Case 2) maximum step voltage exceeds the safety criteria.
In this case, increasing the number of ground grid conductors around
the boundary can solve this problem. Case 3) both of maximum touch
and step voltage exceed the safety criteria. In this case, follow the solutions explained in case 1 and case 2. Another suggestion, vary depth of ground grid until maximum step and touch voltage do not
exceed the safety criteria.
Abstract: This study investigates the relationship between 10
year bond value, Yen/U.S dollar exchange rate, non-farm payrolls (all
employs) and crude oil to U.S. Dow Jones Sustainability Index. A
GARCH model is used to test these relationships for the period
January 1st 1999 to January 31st 2008 using monthly data. Results
show that an increase of the 10 year bond and non farm payrolls (all
employs) lead to an increase of the D.J.S.I returns. On the contrary
the volatility of the Yen/U.S dollar exchange rates as well as the
increase of crude oil returns has negative effects on the U.S D.J.S.I
returns. This study aims at assisting investors to understand the
influences certain macroeconomic indicators have on the companies-
stock returns as reported by the D.J.S.I.
Abstract: We have developed a microfluidic device system for the continuous producting of nanoparticles, and we have clarified the relationship between the mixing performance of reactors and the particle size. First, we evaluated the mixing performance of reactors by carring out the Villermaux–Dushman reaction and determined the experimental conditions for producing AgCl nanoparticles. Next, we produced AgCl nanoparticles and evaluated the mixing performance and the particle size. We found that as the mixing performance improves the size of produced particles decreases and the particle size distribution becomes sharper. We produced AgCl nanoparticles with a size of 86 nm using the microfluidic device that had the best mixing performance among the three reactors we tested in this study; the coefficient of variation (Cv) of the size distribution of the produced nanoparticles was 26.1%.
Abstract: A new concept for long-term reagent storage for Labon- a-Chip (LoC) devices is described. Here we present a polymer multilayer stack with integrated stick packs for long-term storage of several liquid reagents, which are necessary for many diagnostic applications. Stick packs are widely used in packaging industry for storing solids and liquids for long time. The storage concept fulfills two main requirements: First, a long-term storage of reagents in stick packs without significant losses and interaction with surroundings, second, on demand releasing of liquids, which is realized by pushing a membrane against the stick pack through pneumatic pressure. This concept enables long-term on-chip storage of liquid reagents at room temperature and allows an easy implementation in different LoC devices.
Abstract: If price and quantity are the fundamental building
blocks of any theory of market interactions, the importance of trading
volume in understanding the behavior of financial markets is clear.
However, while many economic models of financial markets have
been developed to explain the behavior of prices -predictability,
variability, and information content- far less attention has been
devoted to explaining the behavior of trading volume. In this article,
we hope to expand our understanding of trading volume by
developing a new measure of herding behavior based on a cross
sectional dispersion of volumes betas. We apply our measure to the
Toronto stock exchange using monthly data from January 2000 to
December 2002. Our findings show that the herd phenomenon
consists of three essential components: stationary herding, intentional
herding and the feedback herding.
Abstract: A major requirement for Grid application developers is ensuring performance and scalability of their applications. Predicting the performance of an application demands understanding its specific features. This paper discusses performance modeling and prediction of multi-agent based simulation (MABS) applications on the Grid. An experiment conducted using a synthetic MABS workload explains the key features to be included in the performance model. The results obtained from the experiment show that the prediction model developed for the synthetic workload can be used as a guideline to understand to estimate the performance characteristics of real world simulation applications.
Abstract: Although in sustainable development field, innovative
solutions have been sought worldwide by environmental groups,
academia, governments and companies for many years, recently,
citizens and communities have emerged as a new group and taken
more and more active role in this field. Many scholars call for more
research on the role of community and community innovation in
sustainable development. This paper is to respond to the calls. In
this paper, we first summarize a comprehensive set of innovation
principles. Then, we do a qualitative cross case study by comparing
three community innovation cases in three different areas of sustainable
development according to the innovation principles. Finally,
we summarize the case comparison and discuss the implications
to sustainable development. A unified role model and innovation
distribution map of community innovation are developed to better
understand community innovation in sustainable development..
Abstract: The main objective of this paper is applying a
comparison between the Wolf Pack Search (WPS) as a newly
introduced intelligent algorithm with several other known algorithms
including Particle Swarm Optimization (PSO), Shuffled Frog
Leaping (SFL), Binary and Continues Genetic algorithms. All
algorithms are applied on two benchmark cost functions. The aim is
to identify the best algorithm in terms of more speed and accuracy in
finding the solution, where speed is measured in terms of function
evaluations. The simulation results show that the SFL algorithm with
less function evaluations becomes first if the simulation time is
important, while if accuracy is the significant issue, WPS and PSO
would have a better performance.
Abstract: Results are presented from a combined experimental
and modeling study undertaken to understand the effect of fuel spray
angle on soot production in turbulent liquid spray flames. The
experimental work was conducted in a cylindrical laboratory furnace
at fuel spray cone angle of 30º, 45º and 60º. Soot concentrations
inside the combustor are measured by filter paper technique. The soot
concentration is modeled by using the soot particle number density
and the mass density based acetylene concentrations. Soot oxidation
occurred by both hydroxide radicals and oxygen molecules. The
comparison of calculated results against experimental measurements
shows good agreement. Both the numerical and experimental results
show that the peak value of soot and its location in the furnace
depend on fuel spray cone angle. An increase in spray angle enhances
the evaporating rate and peak temperature near the nozzle. Although
peak soot concentration increase with enhance of fuel spray angle but
soot emission from the furnace decreases.
Abstract: The purpose of this study was to develop a “teachers’
self-efficacy scale for high school physical education teachers
(TSES-HSPET)” in Taiwan. This scale is based on the self-efficacy
theory of Bandura [1], [2]. This study used exploratory and
confirmatory factor analyses to test the reliability and validity. The
participants were high school physical education teachers in Taiwan.
Both stratified random sampling and cluster sampling were used to
sample participants for the study. 350 teachers were sampled in the
first stage and 234 valid scales (male 133, female 101) returned.
During the second stage, 350 teachers were sampled and 257 valid
scales (male 143, female 110, 4 did not indicate gender) returned. The
exploratory factor analysis was used in the first stage, and it got
60.77% of total variance for construct validity. The Cronbach’s alpha
coefficient of internal consistency was 0.91 for sumscale, and
subscales were 0.84 and 0.90. In the second stage, confirmatory factor
analysis was used to test construct validity. The result showed that the
fit index could be accepted (χ2 (75) =167.94, p
Abstract: The cinema in Turkey during the 1940s was shaped
under the Second World War conditions. The amateur film makers
from different socioeconomic roots experienced movie production in
those years. Having similar socioeconomic characteristics and
autobiographies, each of them has a different understanding of
cinema. Nevertheless, they joined in making movies which address
native culture and audience. They narrated indigenous stories with
native music, amateur players and simple settings. Although the
martial law, censorship and economical deficiencies, they started to
produce films in the Second World War. The cinematographers of the
1940s usually called as thetransition period cinematographers in
Turkey, producing in the passage between the period of thetheatre
playersand the period of thenational cinema. But, 1940- 1950 period
of Turkish cinema should be defined not as a transition but a period
of forming the professional conscioussness in cinema.
Abstract: In this paper, a generalized form of the Banzhaf-Owen value for cooperative fuzzy games with a coalition structure is proposed. Its axiomatic system is given by extending crisp case. In order to better understand the Banzhaf-Owen value for fuzzy games with a coalition structure, we briefly introduce the Banzhaf-Owen values for two special kinds of fuzzy games with a coalition structure, and give their explicit forms.
Abstract: Reduction of Single Input Single Output (SISO) discrete systems into lower order model, using a conventional and an evolutionary technique is presented in this paper. In the conventional technique, the mixed advantages of Modified Cauer Form (MCF) and differentiation are used. In this method the original discrete system is, first, converted into equivalent continuous system by applying bilinear transformation. The denominator of the equivalent continuous system and its reciprocal are differentiated successively, the reduced denominator of the desired order is obtained by combining the differentiated polynomials. The numerator is obtained by matching the quotients of MCF. The reduced continuous system is converted back into discrete system using inverse bilinear transformation. In the evolutionary technique method, Particle Swarm Optimization (PSO) is employed to reduce the higher order model. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical example.
Abstract: Understanding the cell's large-scale organization is an
interesting task in computational biology. Thus, protein-protein
interactions can reveal important organization and function of the
cell. Here, we investigated the correspondence between protein
interactions and function for the yeast. We obtained the correlations
among the set of proteins. Then these correlations are clustered using
both the hierarchical and biclustering methods. The detailed analyses
of proteins in each cluster were carried out by making use of their
functional annotations. As a result, we found that some functional
classes appear together in almost all biclusters. On the other hand, in
hierarchical clustering, the dominancy of one functional class is
observed. In brief, from interaction data to function, some correlated
results are noticed about the relationship between interaction and
function which might give clues about the organization of the
proteins.
Abstract: With Power system movement toward restructuring along with factors such as life environment pollution, problems of transmission expansion and with advancement in construction technology of small generation units, it is expected that small units like wind turbines, fuel cells, photovoltaic, ... that most of the time connect to the distribution networks play a very essential role in electric power industry. With increase in developing usage of small generation units, management of distribution networks should be reviewed. The target of this paper is to present a new method for optimal management of active and reactive power in distribution networks with regard to costs pertaining to various types of dispersed generations, capacitors and cost of electric energy achieved from network. In other words, in this method it-s endeavored to select optimal sources of active and reactive power generation and controlling equipments such as dispersed generations, capacitors, under load tapchanger transformers and substations in a way that firstly costs in relation to them are minimized and secondly technical and physical constraints are regarded. Because the optimal management of distribution networks is an optimization problem with continuous and discrete variables, the new evolutionary method based on Ant Colony Algorithm has been applied. The simulation results of the method tested on two cases containing 23 and 34 buses exist and will be shown at later sections.
Abstract: Detection and tracking of the lip contour is an important
issue in speechreading. While there are solutions for lip tracking
once a good contour initialization in the first frame is available,
the problem of finding such a good initialization is not yet solved
automatically, but done manually. We have developed a new tracking
solution for lip contour detection using only few landmarks (15
to 25) and applying the well known Active Shape Models (ASM).
The proposed method is a new LMS-like adaptive scheme based on
an Auto regressive (AR) model that has been fit on the landmark
variations in successive video frames. Moreover, we propose an extra
motion compensation model to address more general cases in lip
tracking. Computer simulations demonstrate a fair match between
the true and the estimated spatial pixels. Significant improvements
related to the well known LMS approach has been obtained via a
defined Frobenius norm index.
Abstract: In this paper, position vector of a partially null unit speed curve with respect to standard frame of Minkowski space-time is studied. First, it is proven that position vector of every partially null unit speed curve satisfies a vector differential equation of fourth order. In terms of solution of the differential equation, position vector of a partially null unit speed curve is expressed.
Abstract: The purpose of this paper is to present teacher candidates- beliefs about technology integration in their field of study, which is classroom teaching in this case. The study was conducted among the first year students in college of education in Turkey. This study is based on both quantitative and qualitative data. For the quantitative data- Likert scale was used and for the qualitative data pattern matching was employed. The primary findings showed that students defined educational technology as technologies that improve learning with their visual, easily accessible, and productive features. They also believe these technologies could affect their future students- learning positively.
Abstract: This study deals with Computational Fluid Dynamics
(CFD) studies of the interactions between the air flow and louvered
fins which equipped the automotive heat exchangers. 3D numerical
simulation results are obtained by using the ANSYS Fluent 13.0 code
and compared to experimental data. The paper studies the effect of
louver angle and louver pitch geometrical parameters, on overall
thermal hydraulic performances of louvered fins.
The comparison between CFD simulations and experimental data
show that established 3-D CFD model gives a good agreement. The
validation agrees, with about 7% of deviation respectively of friction
and Colburn factors to experimental results. As first, it is found that
the louver angle has a strong influence on the heat transfer rate. Then,
louver angle and louver pitch variation of the louvers and their effects
on thermal hydraulic performances are studied. In addition to this
study, it is shown that the second half of the fin takes has a
significant contribution on pressure drop increase without any
increase in heat transfer.