Abstract: In this work Artificial Intelligence (AI) techniques like Fuzzy logic, Genetic Algorithms and Particle Swarm Optimization have been used to improve the performance of the Automatic Generation Control (AGC) system. Instead of applying Genetic Algorithms and Particle swarm optimization independently for optimizing the parameters of the conventional AGC with PI controller, an intelligent tuned Fuzzy logic controller (acting as the secondary controller in the AGC system) has been designed. The controller gives an improved dynamic performance for both hydrothermal and thermal-thermal power systems under a variety of operating conditions.
Abstract: Impinging jets are widely used in industrial cooling
systems for their high heat transfer characteristics at stagnation points.
However, the heat transfer characteristics are low in the downstream
direction. In order to improve the heat transfer coefficient further
downstream, investigations introducing ribs on jet-cooled flat plates
have been conducted. Most studies regarding the heat-transfer
enhancement using a rib-roughened wall have dealt with the rib pitch.
In this paper, we focused on the rib spacing and demonstrated that the
rib spacing must be more than 6 times the nozzle width to improve heat
transfer at Reynolds number Re=5.0×103 because it is necessary to
have enough space to allow reattachment of flow behind the first rib.
Abstract: In the real application of active control systems to
mitigate the response of structures subjected to sever external
excitations such as earthquake and wind induced vibrations, since the
capacity of actuators is limited then the actuators saturate. Hence, in
designing controllers for linear and nonlinear structures under sever
earthquakes, the actuator saturation should be considered as a
constraint. In this paper optimal design of active controllers for
nonlinear structures by considering the actuator saturation has been
studied. To this end a method has been proposed based on defining
an optimization problem which considers the minimizing of the
maximum displacement of the structure as objective when a limited
capacity for actuator has been used as a constraint in optimization
problem. To evaluate the effectiveness of the proposed method, a
single degree of freedom (SDF) structure with a bilinear hysteretic
behavior has been simulated under a white noise ground acceleration
of different amplitudes. Active tendon control mechanism, comprised
of pre-stressed tendons and an actuator, and extended nonlinear
Newmark method based instantaneous optimal control algorithm
have been used as active control mechanism and algorithm. To
enhance the efficiency of the controllers, the weights corresponding
to displacement, velocity, acceleration and control force in the
performance index have been found by using the Distributed Genetic
Algorithm (DGA). According to the results it has been concluded
that the proposed method has been effective in considering the
actuator saturation in designing optimal controllers for nonlinear
frames. Also it has been shown that the actuator capacity and the
average value of required control force are two important factors in
designing nonlinear controllers for considering the actuator
saturation.
Abstract: The successful use of CDMA technology is based on
the construction of large families of encoding sequences with good
correlation properties. This paper discusses PN sequence generation
based on Residue Arithmetic with an effort to improve the performance
of existing interference-limited CDMA technology for mobile
cellular systems. All spreading codes with residual number system
proposed earlier did not consider external interferences, multipath
propagation, Doppler effect etc. In literature the use of residual
arithmetic in DS-CDMA was restricted to encoding of already spread
sequence; where spreading of sequence is done by some existing
techniques. The novelty of this paper is the use of residual number
system in generation of the PN sequences which is used to spread
the message signal. The significance of cross-correlation factor in
alleviating multi-access interference is also discussed. The RNS based
PN sequence has superior performance than most of the existing
codes that are widely used in DS-CDMA applications. Simulation
results suggest that the performance of the proposed system is
superior to many existing systems.
Abstract: We present a white LED-based optical wireless
communication systems for indoor ubiquitous sensor networks. Each
sensor node could access to the server through the PLC (Power Line
Communication)-Ethernet interface. The proposed system offers a
full-duplex wireless link by using different wavelengths to reduce the
inter-symbol interference between uplink and downlink. Through the
1-to-n optical wireless sensor network and PLC modem, the mobile
terminals send a temperature data to server. The data transmission
speed and distance are 115.2kbps and about 60cm, respectively.
Abstract: To simulate heating systems in buildings, a research oriented computer code has been developed in Sharif University of Technology in Iran where the climate, existing heating equipment in buildings, consumer behavior and their interactions are considered for simulating energy consumption in conventional systems such as heaters, radiators and fan-coils. In order to validate the computer code, the available data of five buildings was used and the computed consumed energy was compared with the estimated energy extracted from monthly bills. The initial heating system was replaced by the alternative system and the effect of this change was observed on the energy consumption. As a result, the effect of changing heating equipment on energy consumption was investigated in different climates. Changing heater to radiator renders energy conservation up to 50% in all climates and changing radiator to fan-coil decreases energy consumption in climates with cold and dry winter.
Abstract: The Beijing road traffic system, as a typical huge
urban traffic system, provides a platform for analyzing the complex
characteristics and the evolving mechanisms of urban traffic systems.
Based on dynamic network theory, we construct the dynamic model
of the Beijing road traffic system in which the dynamical properties
are described completely. Furthermore, we come into the conclusion
that urban traffic systems can be viewed as static networks, stochastic
networks and complex networks at different system phases by
analyzing the structural randomness. As well as, we demonstrate the
evolving process of the Beijing road traffic network based on real
traffic data, validate the stochastic characteristics and the scale-free
property of the network at different phases
Abstract: User interaction components of Augmented Reality (AR) systems have to be tested with users in order to find and fix usability problems as early as possible. In this paper we will report on a user-centered design approach for AR systems following the experience acquired during the design and evaluation of a software prototype for an AR-based educational platform. In this respect we will focus on the re-design of the user task based on the results from a formative usability evaluation. The basic idea of our approach is to describe task scenarios in a tabular format, to develop a task model in a task modeling environment and then to simulate the execution.
Abstract: This paper presents a set of guidelines for the design
of multi-user awareness systems. In a first step, general requirements
for team awareness systems are analyzed. In the second part of the
paper, the identified requirements are aggregated and transformed
into concrete design guidelines for the development of team
awareness systems.
Abstract: The peng-Robinson (PR), a cubic equation of state (EoS), is extended to polymers by using a single set of energy (A1, A2, A3) and co-volume (b) parameters per polymer fitted to experimental volume data. Excellent results for the volumetric behavior of the 11 polymer up to 2000 bar pressure are obtained. The EoS is applied to the correlation and prediction of Henry constants in polymer solutions comprising three polymer and many nonpolar and polar solvents, including supercritical gases. The correlation achieved with two adjustable parameter is satisfactory compared with the experimental data. As a result, the present work provides a simple and useful model for the prediction of Henry's constant for polymer containing systems including those containing polar, nonpolar and supercritical fluids.
Abstract: The problem of updating damped gyroscopic systems using measured modal data can be mathematically formulated as following two problems. Problem I: Given Ma ∈ Rn×n, Λ = diag{λ1, ··· , λp} ∈ Cp×p, X = [x1, ··· , xp] ∈ Cn×p, where p
Abstract: Knowledge discovery from text and ontology learning
are relatively new fields. However their usage is extended in many
fields like Information Retrieval (IR) and its related domains. Human
Plausible Reasoning based (HPR) IR systems for example need a
knowledge base as their underlying system which is currently made
by hand. In this paper we propose an architecture based on ontology
learning methods to automatically generate the needed HPR
knowledge base.
Abstract: Social bookmarking is an environment in which
the user gradually changes interests over time so that the tag
data associated with the current temporal period is usually more
important than tag data temporally far from the current period.
This implies that in the social tagging system, the newly tagged
items by the user are more relevant than older items. This study
proposes a novel recommender system that considers the users-
recent tag preferences. The proposed system includes the
following stages: grouping similar users into clusters using an
E-M clustering algorithm, finding similar resources based on
the user-s bookmarks, and recommending the top-N items to
the target user. The study examines the system-s information
retrieval performance using a dataset from del.icio.us, which is
a famous social bookmarking web site. Experimental results
show that the proposed system is better and more effective than
traditional approaches.
Abstract: Non-Destructive evaluation of in-service power
transformer condition is necessary for avoiding catastrophic failures.
Dissolved Gas Analysis (DGA) is one of the important methods.
Traditional, statistical and intelligent DGA approaches have been
adopted for accurate classification of incipient fault sources.
Unfortunately, there are not often enough faulty patterns required for
sufficient training of intelligent systems. By bootstrapping the
shortcoming is expected to be alleviated and algorithms with better
classification success rates to be obtained. In this paper the
performance of an artificial neural network, K-Nearest Neighbour
and support vector machine methods using bootstrapped data are
detailed and shown that while the success rate of the ANN algorithms
improves remarkably, the outcome of the others do not benefit so
much from the provided enlarged data space. For assessment, two
databases are employed: IEC TC10 and a dataset collected from
reported data in papers. High average test success rate well exhibits
the remarkable outcome.
Abstract: With the extensive inclusion of document, especially
text, in the business systems, data mining does not cover the full
scope of Business Intelligence. Data mining cannot deliver its impact
on extracting useful details from the large collection of unstructured
and semi-structured written materials based on natural languages.
The most pressing issue is to draw the potential business intelligence
from text. In order to gain competitive advantages for the business, it
is necessary to develop the new powerful tool, text mining, to expand
the scope of business intelligence.
In this paper, we will work out the strong points of text mining in
extracting business intelligence from huge amount of textual
information sources within business systems. We will apply text
mining to each stage of Business Intelligence systems to prove that
text mining is the powerful tool to expand the scope of BI. After
reviewing basic definitions and some related technologies, we will
discuss the relationship and the benefits of these to text mining. Some
examples and applications of text mining will also be given. The
motivation behind is to develop new approach to effective and
efficient textual information analysis. Thus we can expand the scope
of Business Intelligence using the powerful tool, text mining.
Abstract: Fatigue tests of specimen-s with numerous holes are
presented. The tests were made up till fatigue cracks have been
created on both sides of the hole. Their extension was stopping with
pressed plastic deformation at the mouth of the detected crack. It is
shown that the moments of occurrence of cracks on holes are
stochastically dependent. This dependence has positive and negative
correlation relations. Shown that the positive correlation is formed
across of the applied force, while negative one – along it. The
negative relationship extends over a greater distance. The
mathematical model of dependence area formation is represented as
well as the estimating of model parameters. The positive correlation
of fatigue cracks origination can be considered as an extension of one
main crack. With negative correlation the first crack locates the place
of its origin, leading to the appearance of multiple cracks; do not
merge with each other.
Abstract: This study analyzed the creativity of student teams
participating in an exploratory information system development
project (ISDP) and examined antecedents of their creativity. By using
partial least squares (PLS) to analyze a sample of thirty-six teams
enrolled in an information system department project training course
that required three semesters of project-based lessons, the results
found social capitals (structural, relational and cognitive social capital)
positively influence knowledge integration. However, relational social
capital does not significantly influence knowledge integration.
Knowledge integration positively affects team creativity. This study
also demonstrated that social capitals significantly influence team
creativity through knowledge integration. The implications of our
findings for future research are discussed.
Abstract: Optical emission based on excitonic scattering processes becomes important in dense exciton systems in which the average distance between excitons is of the order of a few Bohr radii but still below the exciton screening threshold. The phenomena due to interactions among excited states play significant role in the emission near band edge of the material. The theory of two-exciton collisions for GaAs/AlGaAs quantum well systems is a mild attempt to understand the physics associated with the optical spectra due to excitonic scattering processes in these novel systems. The four typical processes considered give different spectral shape, peak position and temperature dependence of the emission spectra. We have used the theory of scattering together with the second order perturbation theory to derive the radiative power spontaneously emitted at an energy ħω by these processes. The results arrived at are purely qualitative in nature. The intensity of emitted light in quantum well systems varies inversely to the square of temperature, whereas in case of bulk materials it simply decreases with the temperature.
Abstract: In this work, Experimental tie-line results and
solubility (binodal) curves were obtained for the ternary systems
(water + acetic acid + methyl isobutyl ketone (MIBK)), (water +
lactic acid+ methyl isobutyl ketone) at T = 294.15K and atmospheric
pressure. The consistency of the values of the experimental tie-lines
was determined through the Othmer-Tobias and Hands correlations.
For the extraction effectiveness of solvents, the distribution and
selectivity curves were plotted. In addition, these experimental tieline
data were also correlated with NRTL model. The interaction
parameters for the NRTL model were retrieved from the obtained
experimental results by means of a combination of the homotopy
method and the genetic algorithms.
Abstract: In this paper we present high performance
dynamically allocated multi-queue (DAMQ) buffer schemes for fault
tolerance systems on chip applications that require an interconnection
network. Two virtual channels shared the same buffer space. Fault
tolerant mechanisms for interconnection networks are becoming a
critical design issue for large massively parallel computers. It is also
important to high performance SoCs as the system complexity keeps
increasing rapidly. On the message switching layer, we make
improvement to boost system performance when there are faults
involved in the components communication. The proposed scheme is
when a node or a physical channel is deemed as faulty, the previous
hop node will terminate the buffer occupancy of messages destined
to the failed link. The buffer usage decisions are made at switching
layer without interactions with higher abstract layer, thus buffer
space will be released to messages destined to other healthy nodes
quickly. Therefore, the buffer space will be efficiently used in case
fault occurs at some nodes.