Abstract: In this paper an algorithm based on the adaptive
neuro-fuzzy controller is provided to enhance the tipover stability of
mobile manipulators when they are subjected to predefined
trajectories for the end-effector and the vehicle. The controller
creates proper configurations for the manipulator to prevent the robot
from being overturned. The optimal configuration and thus the most
favorable control are obtained through soft computing approaches
including a combination of genetic algorithm, neural networks, and
fuzzy logic. The proposed algorithm, in this paper, is that a look-up
table is designed by employing the obtained values from the genetic
algorithm in order to minimize the performance index and by using
this data base, rule bases are designed for the ANFIS controller and
will be exerted on the actuators to enhance the tipover stability of the
mobile manipulator. A numerical example is presented to
demonstrate the effectiveness of the proposed algorithm.
Abstract: A simple analytical model has been developed to
optimize biasing conditions for obtaining maximum linearity among
lattice-matched, pseudomorphic and metamorphic HEMT types as
well as enhancement and depletion HEMT modes. A nonlinear
current-voltage model has been simulated based on extracted data to
study and select the most appropriate type and mode of HEMT in
terms of a given gate-source biasing voltage within the device so as
to employ the circuit for the highest possible output current or
voltage linear swing. Simulation results can be used as a basis for the
selection of optimum gate-source biasing voltage for a given type
and mode of HEMT with regard to a circuit design. The
consequences can also be a criterion for choosing the optimum type
or mode of HEMT for a predetermined biasing condition.
Abstract: A numerical study on the turbulent flow and heat
transfer characteristics in the rectangular channel with different types
of baffles is carried out. The inclined baffles have the width of 19.8
cm, the square diamond type hole having one side length of 2.55 cm,
and the inclination angle of 5o. Reynolds number is varied between
23,000 and 57,000. The SST turbulence model is applied in the
calculation. The validity of the numerical results is examined by the
experimental data. The numerical results of the flow field depict that
the flow patterns around the different baffle type are entirely different
and these significantly affect the local heat transfer characteristics.
The heat transfer and friction factor characteristics are significantly
affected by the perforation density of the baffle plate. It is found that
the heat transfer enhancement of baffle type II (3 hole baffle) has the
best values.
Abstract: A prototype of an anomaly detection system was
developed to automate process of recognizing an anomaly of
roentgen image by utilizing fuzzy histogram hyperbolization image
enhancement and back propagation artificial neural network.
The system consists of image acquisition, pre-processor, feature
extractor, response selector and output. Fuzzy Histogram
Hyperbolization is chosen to improve the quality of the roentgen
image. The fuzzy histogram hyperbolization steps consist of
fuzzyfication, modification of values of membership functions and
defuzzyfication. Image features are extracted after the the quality of
the image is improved. The extracted image features are input to the
artificial neural network for detecting anomaly. The number of nodes
in the proposed ANN layers was made small.
Experimental results indicate that the fuzzy histogram
hyperbolization method can be used to improve the quality of the
image. The system is capable to detect the anomaly in the roentgen
image.
Abstract: A new analysis of perceptual speech enhancement is
presented. It focuses on the fact that if only noise above the masking
threshold is filtered, then noise below the masking threshold, but
above the absolute threshold of hearing, can become audible after the
masker filtering. This particular drawback of some perceptual filters,
hereafter called the maskee-to-audible-noise (MAN) phenomenon,
favours the emergence of isolated tonals that increase musical noise.
Two filtering techniques that avoid or correct the MAN phenomenon
are proposed to effectively suppress background noise without introducing
much distortion. Experimental results, including objective
and subjective measurements, show that these techniques improve
the enhanced speech quality and the gain they bring emphasizes the
importance of the MAN phenomenon.
Abstract: A conventional image posterization method
occasionally fails to preserve the shape and color of objects due to the
uneffective color reduction. This paper proposes a new image
posterizartion method by using modified color quantization for
preserving the shape and color of objects and color contrast
enhancement for improving lightness contrast and saturation.
Experiment results show that our proposed method can provide
visually more satisfactory posterization result than that of the
conventional method.
Abstract: Healthcare providers sometimes use the power of
humor as a treatment and therapy for buffering mental health or easing
mental disorders because humor can provide relief from distress and
conflict. Humor is also very suitable for advertising because of similar
benefits. This study carefully examines humor's widespread use in
advertising and identifies relationships among humor mechanisms,
female depictions, and product types. The purpose is to conceptualize
how humor theories can be used not only to successfully define a
product as fitting within one of four color categories of the product
color matrix, but also to identify compelling contemporary female
depictions through humor in ads. The results can offer an idealization
for marketing managers and consumers to help them understand how
female role depictions can be effectively used with humor in ads. The
four propositions developed herein are derived from related literature,
through the identification of marketing strategy formulations that
achieve product memory enhancement by adopting humor
mechanisms properly matched with female role depictions.
Abstract: The neurogenic potential of many herbal extracts used
in Indian medicine is hitherto unknown. Extracts derived from
Clitoria ternatea Linn have been used in Indian Ayurvedic system of
medicine as an ingredient of “Medhya rasayana", consumed for
improving memory and longevity in humans and also in treatment of
various neurological disorders. Our earlier experimental studies with
oral intubation of Clitoria ternatea aqueous root extract (CTR) had
shown significant enhancement of learning and memory in postnatal
and young adult Wistar rats. The present study was designed to
elucidate the in vitro effects of 200ng/ml of CTR on proliferation,
differentiation and growth of anterior subventricular zone neural
stem cells (aSVZ NSC-s) derived from prenatal and postnatal rat
pups. Results show significant increase in proliferation and growth of
neurospheres and increase in the yield of differentiated neurons of
aSVZ neural precursor cells (aSVZNPC-s) at 7 days in vitro when
treated with 200ng/ml of CTR as compared to age matched control.
Results indicate that CTR has growth promoting neurogenic effect on
aSVZ neural stem cells and their survival similar to neurotrophic
factors like Survivin, Neuregulin 1, FGF-2, BDNF possibly the basis
for enhanced learning and memory.
Abstract: To compress, improve bit error performance and also enhance 2D images, a new scheme, called Iterative Cellular-Turbo System (IC-TS) is introduced. In IC-TS, the original image is partitioned into 2N quantization levels, where N is denoted as bit planes. Then each of the N-bit-plane is coded by Turbo encoder and transmitted over Additive White Gaussian Noise (AWGN) channel. At the receiver side, bit-planes are re-assembled taking into consideration of neighborhood relationship of pixels in 2-D images. Each of the noisy bit-plane values of the image is evaluated iteratively using IC-TS structure, which is composed of equalization block; Iterative Cellular Image Processing Algorithm (ICIPA) and Turbo decoder. In IC-TS, there is an iterative feedback link between ICIPA and Turbo decoder. ICIPA uses mean and standard deviation of estimated values of each pixel neighborhood. It has extra-ordinary satisfactory results of both Bit Error Rate (BER) and image enhancement performance for less than -1 dB Signal-to-Noise Ratio (SNR) values, compared to traditional turbo coding scheme and 2-D filtering, applied separately. Also, compression can be achieved by using IC-TS systems. In compression, less memory storage is used and data rate is increased up to N-1 times by simply choosing any number of bit slices, sacrificing resolution. Hence, it is concluded that IC-TS system will be a compromising approach in 2-D image transmission, recovery of noisy signals and image compression.
Abstract: In this paper, we study on color transformation
method on website images for the color blind. The most common
category of color blindness is red-green color blindness which is
viewed as beige color. By transforming the colors of the images, the
color blind can improve their color visibility. They can have a better
view when browsing through the websites. To transform colors on
the website images, we study on two algorithms which are the
conversion techniques from RGB color space to HSV color space and
self-organizing color transformation. The comparative study focuses
on criteria based on the ease of use, quality, accuracy and efficiency.
The outcome of the study leads to enhancement of website images to
meet the color blinds- vision requirements in perceiving image
detailed.
Abstract: Soft clays are defined as cohesive soil whose water
content is higher than its liquid limits. Thus, soil-cement mixing is
adopted to improve the ground conditions by enhancing the strength
and deformation characteristics of the soft clays. For the above
mentioned reasons, a series of laboratory tests were carried out to
study some fundamental mechanical properties of cement stabilized
soft clay. The test specimens were prepared by varying the portion of
ordinary Portland cement to the soft clay sample retrieved from the
test site of RECESS (Research Centre for Soft Soil). Comparisons
were made for both homogeneous and columnar system specimens
by relating the effects of cement stabilized clay of for 0, 5 and 10 %
cement and curing for 3, 28 and 56 days. The mechanical properties
examined included one-dimensional compressibility and undrained
shear strength. For the mechanical properties, both homogeneous and
columnar system specimens were prepared to examine the effect of
different cement contents and curing periods on the stabilized soil.
The one-dimensional compressibility test was conducted using an
oedometer, while a direct shear box was used for measuring the
undrained shear strength. The higher the value of cement content, the
greater is the enhancement of the yield stress and the decrease of
compression index. The value of cement content in a specimen is a
more active parameter than the curing period.
Abstract: Cement, the most widely used construction material
is very brittle and characterized by low tensile strength and strain
capacity. Macro to nano fibers are added to cement to provide
tensile strength and ductility to it. Carbon Nanotube (CNT), one of
the nanofibers, has proven to be a promising reinforcing material in
the cement composites because of its outstanding mechanical
properties and its ability to close cracks at the nano level. The
experimental investigations for CNT reinforced cement is costly,
time consuming and involves huge number of trials. Mathematical
modeling of CNT reinforced cement can be done effectively and
efficiently to arrive at the mechanical properties and to reduce the
number of trials in the experiments. Hence, an attempt is made to
numerically study the effective mechanical properties of CNT
reinforced cement numerically using Representative Volume
Element (RVE) method. The enhancement in its mechanical
properties for different percentage of CNTs is studied in detail.
Abstract: In mechanical and environmental engineering, mixed
convection is a frequently encountered thermal fluid phenomenon
which exists in atmospheric environment, urban canopy flows, ocean
currents, gas turbines, heat exchangers, and computer chip cooling
systems etc... . This paper deals with a numerical investigation of
mixed convection in a vertical heated channel. This flow results from
the mixing of the up-going fluid along walls of the channel with the
one issued from a flat nozzle located in its entry section. The fluiddynamic
and heat-transfer characteristics of vented vertical channels
are investigated for constant heat-flux boundary conditions, a
Rayleigh number equal to 2.57 1010, for two jet Reynolds number
Re=3 103 and 2104 and the aspect ratio in the 8-20 range. The system
of governing equations is solved with a finite volumes method and an
implicit scheme. The obtained results show that the turbulence and
the jet-wall interaction activate the heat transfer, as does the drive of
ambient air by the jet. For low Reynolds number Re=3 103, the
increase of the aspect Ratio enhances the heat transfer of about 3%,
however; for Re=2 104, the heat transfer enhancement is of about
12%. The numerical velocity, pressure and temperature fields are
post-processed to compute the quantities of engineering interest such
as the induced mass flow rate, and average Nusselt number, in terms
of Rayleigh, Reynolds numbers and dimensionless geometric
parameters are presented.
Abstract: In this paper, an algorithm for detecting and attenuating
puff noises frequently generated under the mobile environment is
proposed. As a baseline system, puff detection system is designed
based on Gaussian Mixture Model (GMM), and 39th Mel Frequency
Cepstral Coefficient (MFCC) is extracted as feature parameters. To
improve the detection performance, effective acoustic features for puff
detection are proposed. In addition, detected puff intervals are
attenuated by high-pass filtering. The speech recognition rate was
measured for evaluation and confusion matrix and ROC curve are used
to confirm the validity of the proposed system.
Abstract: Image coding based on clustering provides immediate
access to targeted features of interest in a high quality decoded
image. This approach is useful for intelligent devices, as well as for
multimedia content-based description standards. The result of image
clustering cannot be precise in some positions especially on pixels
with edge information which produce ambiguity among the clusters.
Even with a good enhancement operator based on PDE, the quality of
the decoded image will highly depend on the clustering process. In
this paper, we introduce an ambiguity cluster in image coding to
represent pixels with vagueness properties. The presence of such
cluster allows preserving some details inherent to edges as well for
uncertain pixels. It will also be very useful during the decoding phase
in which an anisotropic diffusion operator, such as Perona-Malik,
enhances the quality of the restored image. This work also offers a
comparative study to demonstrate the effectiveness of a fuzzy
clustering technique in detecting the ambiguity cluster without losing
lot of the essential image information. Several experiments have been
carried out to demonstrate the usefulness of ambiguity concept in
image compression. The coding results and the performance of the
proposed algorithms are discussed in terms of the peak signal-tonoise
ratio and the quantity of ambiguous pixels.
Abstract: This paper presents the results of enhancing images from a left and right stereo pair in order to increase the resolution of a 3D representation of a scene generated from that same pair. A new neural network structure known as a Self Delaying Dynamic Network (SDN) has been used to perform the enhancement. The advantage of SDNs over existing techniques such as bicubic interpolation is their ability to cope with motion and noise effects. SDNs are used to generate two high resolution images, one based on frames taken from the left view of the subject, and one based on the frames from the right. This new high resolution stereo pair is then processed by a disparity map generator. The disparity map generated is compared to two other disparity maps generated from the same scene. The first is a map generated from an original high resolution stereo pair and the second is a map generated using a stereo pair which has been enhanced using bicubic interpolation. The maps generated using the SDN enhanced pairs match more closely the target maps. The addition of extra noise into the input images is less problematic for the SDN system which is still able to out perform bicubic interpolation.
Abstract: This paper presents a genetic algorithm based
approach for solving security constrained optimal power flow
problem (SCOPF) including FACTS devices. The optimal location of
FACTS devices are identified using an index called overload index
and the optimal values are obtained using an enhanced genetic
algorithm. The optimal allocation by the proposed method optimizes
the investment, taking into account its effects on security in terms of
the alleviation of line overloads. The proposed approach has been
tested on IEEE-30 bus system to show the effectiveness of the
proposed algorithm for solving the SCOPF problem.
Abstract: Discrete particle swarm optimization (DPSO) is a
powerful stochastic evolutionary algorithm that is used to solve the
large-scale, discrete and nonlinear optimization problems. However,
it has been observed that standard DPSO algorithm has premature
convergence when solving a complex optimization problem like
transmission expansion planning (TEP). To resolve this problem an
advanced discrete particle swarm optimization (ADPSO) is proposed
in this paper. The simulation result shows that optimization of lines
loading in transmission expansion planning with ADPSO is better
than DPSO from precision view point.
Abstract: During the last decade ultrafine grained (UFG) and nano-structured (NS) materials have experienced a rapid development. In this research work finite element analysis has been carried out to investigate the plastic strain distribution in equal channel angular process (ECAP). The magnitudes of Standard deviation (S. D.) and inhomogeneity index (Ci) were compared for different ECAP passes. Verification of a three-dimensional finite element model was performed with experimental tests. Finally the mechanical property including impact energy of ultrafine grained pure commercially pure Aluminum produced by severe plastic deformation method has been examined. For this aim, equal channel angular pressing die with the channel angle, outer corner angle and channel diameter of 90°, 20° and 20mm had been designed and manufactured. Commercial pure Aluminum billets were ECAPed up to four passes by route BC at the ambient temperature. The results indicated that there is a great improvement at the hardness measurement, yield strength and ultimate tensile strength after ECAP process. It is found that the magnitudes of HV reach 67HV from 21HV after the final stage of process. Also, about 330% and 285% enhancement at the YS and UTS values have been obtained after the fourth pass as compared to the as-received conditions, respectively. On the other hand, the elongation to failure and impact energy have been reduced by 23% and 50% after imposing four passes of ECAP process, respectively.
Abstract: Composite nanostructures of metal
core/semiconductor shell (Au/CdS) configuration were prepared
using organometalic method. UV-Vis spectra for the Au/CdS colloids
show initially two well separated bands, corresponding to surface
plasmon of the Au core, and the exciton of CdS shell. The absorption
of CdS shell is enhanced, while the Au plasmon band is suppressed
as the shell thickness increases. The shell sizes were estimated from
the optical spectra using the effective mass approximation model
(EMA), and compared to the sizes of the Au core and CdS shell
measured by high resolution transmission electron microscope
(HRTEM). The changes in the absorption features are discussed in
terms of gradual increase in the coupling strength of the Au core
surface plasmon and the exciton in the CdS. leading to charge
transfer and modification of electron oscillation in Au core.