Abstract: The scope of this research was to study the relation between the facial expressions of three lecturers in a real academic lecture theatre and the reactions of the students to those expressions. The first experiment aimed to investigate the effectiveness of a virtual lecturer-s expressions on the students- learning outcome in a virtual pedagogical environment. The second experiment studied the effectiveness of a single facial expression, i.e. the smile, on the students- performance. Both experiments involved virtual lectures, with virtual lecturers teaching real students. The results suggest that the students performed better by 86%, in the lectures where the lecturer performed facial expressions compared to the results of the lectures that did not use facial expressions. However, when simple or basic information was used, the facial expressions of the virtual lecturer had no substantial effect on the students- learning outcome. Finally, the appropriate use of smiles increased the interest of the students and consequently their performance.
Abstract: Adhesively bonded joints are preferred over the
conventional methods of joining such as riveting, welding, bolting
and soldering. Some of the main advantages of adhesive joints
compared to conventional joints are the ability to join dissimilar
materials and damage-sensitive materials, better stress distribution,
weight reduction, fabrication of complicated shapes, excellent
thermal and insulation properties, vibration response and enhanced
damping control, smoother aerodynamic surfaces and an
improvement in corrosion and fatigue resistance. This paper presents
the behavior of adhesively bonded joints subjected to combined
thermal loadings, using the numerical methods. The joint
configuration considers aluminum as central adherend with six
different outer adherends including aluminum, steel, titanium, boronepoxy,
unidirectional graphite-epoxy and cross-ply graphite-epoxy
and epoxy-based adhesives. Free expansion of the joint in x
direction was permitted and stresses in adhesive layer and interfaces
calculated for different adherends.
Abstract: Prediction of bacterial virulent protein sequences can
give assistance to identification and characterization of novel
virulence-associated factors and discover drug/vaccine targets against
proteins indispensable to pathogenicity. Gene Ontology (GO)
annotation which describes functions of genes and gene products as a
controlled vocabulary of terms has been shown effectively for a
variety of tasks such as gene expression study, GO annotation
prediction, protein subcellular localization, etc. In this study, we
propose a sequence-based method Virulent-GO by mining informative
GO terms as features for predicting bacterial virulent proteins.
Each protein in the datasets used by the existing method
VirulentPred is annotated by using BLAST to obtain its homologies
with known accession numbers for retrieving GO terms. After
investigating various popular classifiers using the same five-fold
cross-validation scheme, Virulent-GO using the single kind of GO
term features with an accuracy of 82.5% is slightly better than
VirulentPred with 81.8% using five kinds of sequence-based features.
For the evaluation of independent test, Virulent-GO also yields better
results (82.0%) than VirulentPred (80.7%). When evaluating single
kind of feature with SVM, the GO term feature performs much well,
compared with each of the five kinds of features.
Abstract: Emergence of smartphones brings to live the concept
of converged devices with the availability of web amenities. Such
trend also challenges the mobile devices manufactures and service
providers in many aspects, such as security on mobile phones,
complex and long time design flow, as well as higher development
cost. Among these aspects, security on mobile phones is getting more
and more attention. Microkernel based virtualization technology will
play a critical role in addressing these challenges and meeting mobile
market needs and preferences, since virtualization provides essential
isolation for security reasons and it allows multiple operating systems
to run on one processor accelerating development and cutting development
cost. However, virtualization benefits do not come for free.
As an additional software layer, it adds some inevitable virtualization
overhead to the system, which may decrease the system performance.
In this paper we evaluate and analyze the virtualization performance
cost of L4 microkernel based virtualization on a competitive mobile
phone by comparing the L4Linux, a para-virtualized Linux on top of
L4 microkernel, with the native Linux performance using lmbench
and a set of typical mobile phone applications.
Abstract: Biofuels, like biobutanol, have been recognized for
being renewable and sustainable fuels which can be produced from
lignocellulosic biomass. To convert lignocellulosic biomass to
biofuel, pretreatment process is an important step to remove
hemicelluloses and lignin to improve enzymatic hydrolysis. Dilute
acid pretreatment has been successful developed for pretreatment of
corncobs and the optimum conditions of dilute sulfuric and
phosphoric acid pretreatment were obtained at 120 °C for 5 min with
15:1 liquid to solid ratio and 140 °C for 10 min with 10:1 liquid to
solid ratio, respectively. The result shows that both of acid
pretreatments gave the content of total sugar approximately 34–35
g/l. In case of inhibitor content (furfural), phosphoric acid
pretreatment gives higher than sulfuric acid pretreatment.
Characterizations of corncobs after pretreatment indicate that both of
acid pretreatments can improve enzymatic accessibility and the better
results present in corncobs pretreated with sulfuric acid in term of
surface area, crystallinity, and composition analysis.
Abstract: Recent trends in building constructions in Libya are
more toward tall (high-rise) building projects. As a consequence, a
better estimation of the lateral loading in the design process is
becoming the focal of a safe and cost effective building industry. Byin-
large, Libya is not considered a potential earthquake prone zone,
making wind is the dominant design lateral loads. Current design
practice in the country estimates wind speeds on a mere random
bases by considering certain factor of safety to the chosen wind
speed. Therefore, a need for a more accurate estimation of wind
speeds in Libya was the motivation behind this study. Records of
wind speed data were collected from 22 metrological stations in
Libya, and were statistically analysed. The analysis of more than four
decades of wind speed records suggests that the country can be
divided into four zones of distinct wind speeds. A computer “survey"
program was manipulated to draw design wind speeds contour map
for the state of Libya.
The paper presents the statistical analysis of Libya-s recorded
wind speed data and proposes design wind speed values for a 50-year
return period that covers the entire country.
Abstract: In this paper, we propose a face recognition algorithm
using AAM and Gabor features. Gabor feature vectors which are well
known to be robust with respect to small variations of shape, scaling,
rotation, distortion, illumination and poses in images are popularly
employed for feature vectors for many object detection and
recognition algorithms. EBGM, which is prominent among face
recognition algorithms employing Gabor feature vectors, requires
localization of facial feature points where Gabor feature vectors are
extracted. However, localization method employed in EBGM is based
on Gabor jet similarity and is sensitive to initial values. Wrong
localization of facial feature points affects face recognition rate. AAM
is known to be successfully applied to localization of facial feature
points. In this paper, we devise a facial feature point localization
method which first roughly estimate facial feature points using AAM
and refine facial feature points using Gabor jet similarity-based facial
feature localization method with initial points set by the rough facial
feature points obtained from AAM, and propose a face recognition
algorithm using the devised localization method for facial feature
localization and Gabor feature vectors. It is observed through
experiments that such a cascaded localization method based on both
AAM and Gabor jet similarity is more robust than the localization
method based on only Gabor jet similarity. Also, it is shown that the
proposed face recognition algorithm using this devised localization
method and Gabor feature vectors performs better than the
conventional face recognition algorithm using Gabor jet
similarity-based localization method and Gabor feature vectors like
EBGM.
Abstract: Multiphase flow transport in porous medium is very common and significant in science and engineering applications. For example, in CO2 Storage and Enhanced Oil Recovery processes, CO2 has to be delivered to the pore spaces in reservoirs and aquifers. CO2 storage and enhance oil recovery are actually displacement processes, in which oil or water is displaced by CO2. This displacement is controlled by pore size, chemical and physical properties of pore surfaces and fluids, and also pore wettability. In this study, a technique was developed to measure the pressure profile for driving gas/liquid to displace water in pores. Through this pressure profile, the impact of pore size on the multiphase flow transport and displacement can be analyzed. The other rig developed can be used to measure the static and dynamic pore wettability and investigate the effects of pore size, surface tension, viscosity and chemical structure of liquids on pore wettability.
Abstract: The output beam quality of multi transverse modes of
laser, are relatively poor. In order to obtain better beam quality, one
may use an aperture inside the laser resonator. In this case, various
transverse modes can be selected. We have selected various
transverse modes both by simulation and doing experiment. By
inserting a circular aperture inside the diode end-pumped Nd:YAG
pulsed laser resonator, we have obtained 00 TEM , 01 TEM
, 20 TEM and have studied which parameters, can change the mode
shape. Then, we have determined the beam quality factor of TEM00
gaussian mode.
Abstract: In this paper is presented a Geographic Information System (GIS) approach in order to qualify and monitor the broadband lines in efficient way. The methodology used for interpolation is the Delaunay Triangular Irregular Network (TIN). This method is applied for a case study in ISP Greece monitoring 120,000 broadband lines.
Abstract: Non-saturated soils that while saturation greatly
decrease their volume, have sudden settlement due to increasing
humidity, fracture and structural crack are called loess soils. Whereas
importance of civil projects including: dams, canals and
constructions bearing this type of soil and thereof problems, it is
required for carrying out more research and study in relation to loess
soils. This research studies shear strength parameters by using
grading test, Atterberg limit, compression, direct shear and
consolidation and then effect of using cement and lime additives on
stability of loess soils is studied. In related tests, lime and cement are
separately added to mixed ratios under different percentages of soil
and for different times the stabilized samples are processed and effect
of aforesaid additives on shear strength parameters of soil is studied.
Results show that upon passing time the effect of additives and
collapsible potential is greatly decreased and upon increasing
percentage of cement and lime the maximum dry density is
decreased; however, optimum humidity is increased. In addition,
liquid limit and plastic index is decreased; however, plastic index
limit is increased. It is to be noted that results of direct shear test
reveal increasing shear strength of soil due to increasing cohesion
parameter and soil friction angle.
Abstract: Time varying network induced delays in networked
control systems (NCS) are known for degrading control system-s
quality of performance (QoP) and causing stability problems. In
literature, a control method employing modeling of communication
delays as probability distribution, proves to be a better method. This
paper focuses on modeling of network induced delays as probability
distribution.
CAN and MIL-STD-1553B are extensively used to carry periodic
control and monitoring data in networked control systems.
In literature, methods to estimate only the worst-case delays for
these networks are available. In this paper probabilistic network
delay model for CAN and MIL-STD-1553B networks are given.
A systematic method to estimate values to model parameters from
network parameters is given. A method to predict network delay in
next cycle based on the present network delay is presented. Effect of
active network redundancy and redundancy at node level on network
delay and system response-time is also analyzed.
Abstract: The paper presents the potential of fuzzy logic (FL-I)
and neural network techniques (ANN-I) for predicting the
compressive strength, for SCC mixtures. Six input parameters that is
contents of cement, sand, coarse aggregate, fly ash, superplasticizer
percentage and water-to-binder ratio and an output parameter i.e. 28-
day compressive strength for ANN-I and FL-I are used for modeling.
The fuzzy logic model showed better performance than neural
network model.
Abstract: In this study, effects of premixed and equivalence
ratios on CO and HC emissions of a dual fuel HCCI engine are
investigated. Tests were conducted on a single-cylinder engine with
compression ratio of 17.5. Premixed gasoline is provided by a
carburetor connected to intake manifold and equipped with a screw
to adjust premixed air-fuel ratio, and diesel fuel is injected directly
into the cylinder through an injector at pressure of 250 bars. A heater
placed at inlet manifold is used to control the intake charge
temperature. Optimal intake charge temperature results in better
HCCI combustion due to formation of a homogeneous mixture,
therefore, all tests were carried out over the optimum intake
temperature of 110-115 ºC. Timing of diesel fuel injection has a great
effect on stratification of in-cylinder charge and plays an important
role in HCCI combustion phasing. Experiments indicated 35 BTDC
as the optimum injection timing. Varying the coolant temperature in
a range of 40 to 70 ºC, better HCCI combustion was achieved at 50
ºC. Therefore, coolant temperature was maintained 50 ºC during all
tests. Simultaneous investigation of effective parameters on HCCI
combustion was conducted to determine optimum parameters
resulting in fast transition to HCCI combustion. One of the
advantages of the method studied in this study is feasibility of easy
and fast transition of typical diesel engine to a dual fuel HCCI
engine. Results show that increasing premixed ratio, while keeping
EGR rate constant, increases unburned hydrocarbon (UHC)
emissions due to quenching phenomena and trapping of premixed
fuel in crevices, but CO emission decreases due to increase in CO to
CO2 reactions.
Abstract: A diamond-like carbon (DLC) based solid-lubricant
film was designed and DLC films were successfully prepared using a
microwave plasma enhanced magnetron sputtering deposition
technology. Post-test characterizations including Raman
spectrometry, X-ray diffraction, nano-indentation test, adhesion test,
friction coefficient test were performed to study the influence of
substrate bias voltage on the mechanical properties of the W- and
S-doped DLC films. The results indicated that the W- and S-doped
DLC films also had the typical structure of DLC films and a better
mechanical performance achieved by the application of a substrate
bias of -200V.
Abstract: Physical urban form is recognized to be the media for
human transactions. It directly influences the travel demand of people
in a specific urban area and the amount of energy used for
transportation. Distorted, sprawling form often creates sustainability
problems in urban areas. It is declared in EU strategic planning
documents that compact urban form and mixed land use pattern must
be given the main focus to achieve better sustainability in urban
areas, but the methods to measure and compare these characteristics
are still not clear.
This paper presents the simple methods to measure the spatial
characteristics of urban form by analyzing the location and
distribution of objects in an urban environment. The extended CA
(cellular automata) model is used to simulate urban development
scenarios.
Abstract: LDPC codes could be used in magnetic storage devices because of their better decoding performance compared to other error correction codes. However, their hardware implementation results in large and complex decoders. This one of the main obstacles the decoders to be incorporated in magnetic storage devices. We construct small high girth and rate 2 columnweight codes from cage graphs. Though these codes have low performance compared to higher column weight codes, they are easier to implement. The ease of implementation makes them more suitable for applications such as magnetic recording. Cages are the smallest known regular distance graphs, which give us the smallest known column-weight 2 codes given the size, girth and rate of the code.
Abstract: A trend in agent community or enterprises is that they are shifting from closed to open architectures composed of a large number of autonomous agents. One of its implications could be that interface agent framework is getting more important in multi-agent system (MAS); so that systems constructed for different application domains could share a common understanding in human computer interface (HCI) methods, as well as human-agent and agent-agent interfaces. However, interface agent framework usually receives less attention than other aspects of MAS. In this paper, we will propose an interface web agent framework which is based on our former project called WAF and a Distributed HCI template. A group of new functionalities and implications will be discussed, such as web agent presentation, off-line agent reference, reconfigurable activation map of agents, etc. Their enabling techniques and current standards (e.g. existing ontological framework) are also suggested and shown by examples from our own implementation in WAF.
Abstract: This research paper evaluates and compares the
performance of equal cost adaptive multi-path routing algorithms
taking the transport protocols TCP (Transmission Control Protocol)
and UDP (User Datagram Protocol) using network simulator ns2 and
concludes which one is better.
Abstract: This paper presents a new approach using Combined Artificial Neural Network (CANN) module for daily peak load forecasting. Five different computational techniques –Constrained method, Unconstrained method, Evolutionary Programming (EP), Particle Swarm Optimization (PSO), and Genetic Algorithm (GA) – have been used to identify the CANN module for peak load forecasting. In this paper, a set of neural networks has been trained with different architecture and training parameters. The networks are trained and tested for the actual load data of Chennai city (India). A set of better trained conventional ANNs are selected to develop a CANN module using different algorithms instead of using one best conventional ANN. Obtained results using CANN module confirm its validity.