Abstract: In this paper, the effect of bolt clamping force on the fatigue behavior of bolted single lap joints of aluminum alloy 2024- T3 have been studied using numerical finite element method. To do so, a three dimensional model according to the bolted single lap joint has been created and numerical analysis has been carried out using finite element based package. Then the stress distribution and also the slip amplitudes have been calculated in the critical regions and the outcome have been compared with the available experimental fatigue tests results. The numerical results show that in low applied clamping force, the fatigue failure of the specimens occur around the stress concentration location (the bolted hole edge) due to the tensile stresses and thus fatigue crack propagation, but with increase of the clamping force, the fatigue life increases and the cracks nucleate and propagate far from the hole edge because of fretting fatigue. In other words, with the further increase of clamping force value of the joint, the fatigue life reduces due to occurrence of the fretting fatigue in the critical location where the slip amplitude is within its critical occurs earlier.
Abstract: In this paper we present, propose and examine
additional membership functions for the Smoothing Transition
Autoregressive (STAR) models. More specifically, we present the
tangent hyperbolic, Gaussian and Generalized bell functions.
Because Smoothing Transition Autoregressive (STAR) models
follow fuzzy logic approach, more fuzzy membership functions
should be tested. Furthermore, fuzzy rules can be incorporated or
other training or computational methods can be applied as the error
backpropagation or genetic algorithm instead to nonlinear squares.
We examine two macroeconomic variables of US economy, the
inflation rate and the 6-monthly treasury bills interest rates.
Abstract: In diversity rich environments, such as in Ultra-
Wideband (UWB) applications, the a priori determination of the
number of strong diversity branches is difficult, because of the considerably large number of diversity paths, which are characterized
by a variety of power delay profiles (PDPs). Several
Rake implementations have been proposed in the past, in order to reduce the number of the estimated and combined paths. To this
aim, we introduce two adaptive Rake receivers, which combine
a subset of the resolvable paths considering simultaneously the
quality of both the total combining output signal-to-noise ratio (SNR) and the individual SNR of each path. These schemes achieve
better adaptation to channel conditions compared to other known receivers, without further increasing the complexity. Their performance
is evaluated in different practical UWB channels, whose models are based on extensive propagation measurements. The
proposed receivers compromise between the power consumption,
complexity and performance gain for the additional paths, resulting in important savings in power and computational resources.
Abstract: In this paper the neural network-based controller is
designed for motion control of a mobile robot. This paper treats the
problems of trajectory following and posture stabilization of the
mobile robot with nonholonomic constraints. For this purpose the
recurrent neural network with one hidden layer is used. It learns
relationship between linear velocities and error positions of the
mobile robot. This neural network is trained on-line using the
backpropagation optimization algorithm with an adaptive learning
rate. The optimization algorithm is performed at each sample time to
compute the optimal control inputs. The performance of the proposed
system is investigated using a kinematic model of the mobile robot.
Abstract: In the context of channel coding, the Generalized Belief Propagation (GBP) is an iterative algorithm used to recover the transmission bits sent through a noisy channel. To ensure a reliable transmission, we apply a map on the bits, that is called a code. This code induces artificial correlations between the bits to send, and it can be modeled by a graph whose nodes are the bits and the edges are the correlations. This graph, called Tanner graph, is used for most of the decoding algorithms like Belief Propagation or Gallager-B. The GBP is based on a non unic transformation of the Tanner graph into a so called region-graph. A clear advantage of the GBP over the other algorithms is the freedom in the construction of this graph. In this article, we explain a particular construction for specific graph topologies that involves relevant performance of the GBP. Moreover, we investigate the behavior of the GBP considered as a dynamic system in order to understand the way it evolves in terms of the time and in terms of the noise power of the channel. To this end we make use of classical measures and we introduce a new measure called the hyperspheres method that enables to know the size of the attractors.
Abstract: Minimization methods for training feed-forward networks with Backpropagation are compared. Feedforward network training is a special case of functional minimization, where no explicit model of the data is assumed. Therefore due to the high dimensionality of the data, linearization of the training problem through use of orthogonal basis functions is not desirable. The focus is functional minimization on any basis. A number of methods based on local gradient and Hessian matrices are discussed. Modifications of many methods of first and second order training methods are considered. Using share rates data, experimentally it is proved that Conjugate gradient and Quasi Newton?s methods outperformed the Gradient Descent methods. In case of the Levenberg-Marquardt algorithm is of special interest in financial forecasting.
Abstract: Nonlinear system identification is becoming an important tool which can be used to improve control performance. This paper describes the application of adaptive neuro-fuzzy inference system (ANFIS) model for controlling a car. The vehicle must follow a predefined path by supervised learning. Backpropagation gradient descent method was performed to train the ANFIS system. The performance of the ANFIS model was evaluated in terms of training performance and classification accuracies and the results confirmed that the proposed ANFIS model has potential in controlling the non linear system.
Abstract: Recent scientific investigations indicate that
multimodal biometrics overcome the technical limitations of
unimodal biometrics, making them ideally suited for everyday life
applications that require a reliable authentication system. However,
for a successful adoption of multimodal biometrics, such systems
would require large heterogeneous datasets with complex multimodal
fusion and privacy schemes spanning various distributed
environments. From experimental investigations of current
multimodal systems, this paper reports the various issues related to
speed, error-recovery and privacy that impede the diffusion of such
systems in real-life. This calls for a robust mechanism that caters to
the desired real-time performance, robust fusion schemes,
interoperability and adaptable privacy policies.
The main objective of this paper is to present a framework that
addresses the abovementioned issues by leveraging on the
heterogeneous resource sharing capacities of Grid services and the
efficient machine learning capabilities of artificial neural networks
(ANN). Hence, this paper proposes a Grid-based neural network
framework for adopting multimodal biometrics with the view of
overcoming the barriers of performance, privacy and risk issues that
are associated with shared heterogeneous multimodal data centres.
The framework combines the concept of Grid services for reliable
brokering and privacy policy management of shared biometric
resources along with a momentum back propagation ANN (MBPANN)
model of machine learning for efficient multimodal fusion and
authentication schemes. Real-life applications would be able to adopt
the proposed framework to cater to the varying business requirements
and user privacies for a successful diffusion of multimodal
biometrics in various day-to-day transactions.
Abstract: Developing techniques for mobile robot navigation constitutes one of the major trends in the current
research on mobile robotics. This paper develops a local
model network (LMN) for mobile robot navigation. The
LMN represents the mobile robot by a set of locally valid
submodels that are Multi-Layer Perceptrons (MLPs).
Training these submodels employs Back Propagation (BP) algorithm. The paper proposes the fuzzy C-means (FCM) in this scheme to divide the input space to sub regions, and then a submodel (MLP) is identified to represent a particular
region. The submodels then are combined in a unified
structure. In run time phase, Radial Basis Functions (RBFs) are employed as windows for the activated submodels. This
proposed structure overcomes the problem of changing operating regions of mobile robots. Read data are used in all experiments. Results for mobile robot navigation using the
proposed LMN reflect the soundness of the proposed
scheme.
Abstract: The aim of this paper is to rank the impact of Object
Oriented(OO) metrics in fault prediction modeling using Artificial
Neural Networks(ANNs). Past studies on empirical validation of
object oriented metrics as fault predictors using ANNs have focused
on the predictive quality of neural networks versus standard
statistical techniques. In this empirical study we turn our attention to
the capability of ANNs in ranking the impact of these explanatory
metrics on fault proneness. In ANNs data analysis approach, there is
no clear method of ranking the impact of individual metrics. Five
ANN based techniques are studied which rank object oriented
metrics in predicting fault proneness of classes. These techniques are
i) overall connection weights method ii) Garson-s method iii) The
partial derivatives methods iv) The Input Perturb method v) the
classical stepwise methods. We develop and evaluate different
prediction models based on the ranking of the metrics by the
individual techniques. The models based on overall connection
weights and partial derivatives methods have been found to be most
accurate.
Abstract: Security has been an important issue and concern in the
smart home systems. Smart home networks consist of a wide range of
wired or wireless devices, there is possibility that illegal access to
some restricted data or devices may happen. Password-based
authentication is widely used to identify authorize users, because this
method is cheap, easy and quite accurate. In this paper, a neural
network is trained to store the passwords instead of using verification
table. This method is useful in solving security problems that
happened in some authentication system. The conventional way to
train the network using Backpropagation (BPN) requires a long
training time. Hence, a faster training algorithm, Resilient
Backpropagation (RPROP) is embedded to the MLPs Neural
Network to accelerate the training process. For the Data Part, 200
sets of UserID and Passwords were created and encoded into binary
as the input. The simulation had been carried out to evaluate the
performance for different number of hidden neurons and combination
of transfer functions. Mean Square Error (MSE), training time and
number of epochs are used to determine the network performance.
From the results obtained, using Tansig and Purelin in hidden and
output layer and 250 hidden neurons gave the better performance. As
a result, a password-based user authentication system for smart home
by using neural network had been developed successfully.
Abstract: The Euler-s equation of motion is extended to include
the viscosity stress tensor leading to the formulation of Navier–
Stokes type equation. The latter is linearized and applied to
investigate the rotational motion or vorticity in a viscous fluid.
Relations for the velocity of viscous waves and attenuation parameter
are obtained in terms of viscosity (μ) and the density (¤ü) of the fluid.
μ and ¤ü are measured experimentally as a function of temperature for
two different samples of light and heavy crude oil. These data
facilitated to determine the activation energy, velocity of viscous
wave and the attenuation parameter. Shear wave velocity in heavy oil
is found to be much larger than the light oil, whereas the attenuation
parameter in heavy oil is quite low in comparison to light one. The
activation energy of heavy oil is three times larger than light oil.
Abstract: Radio wave propagation on the road surface is a major
problem on wireless sensor network for traffic monitoring. In this
paper, we compare receiving signal strength on two scenarios 1) an
empty road and 2) a road with a vehicle. We investigate the effect of
antenna polarization and antenna height to the receiving signal
strength. The transmitting antenna is installed on the road surface.
The receiving signal is measured 360 degrees around the transmitting
antenna with the radius of 2.5 meters. Measurement results show the
receiving signal fluctuation around the transmitting antenna in both
scenarios. Receiving signal with vertical polarization antenna results
in higher signal strength than horizontal polarization antenna. The
optimum antenna elevation is 1 meter for both horizon and vertical
polarizations with the vehicle on the road. In the empty road, the
receiving signal level is unvarying with the elevation when the
elevation is greater than 1.5 meters.
Abstract: Nonlinear propagation of ion-acoustic waves in a selfgravitating
dusty plasma consisting of warm positive ions,
isothermal two-temperature electrons and negatively charged dust
particles having charge fluctuations is studied using the reductive
perturbation method. It is shown that the nonlinear propagation of
ion-acoustic waves in such plasma can be described by an uncoupled
third order partial differential equation which is a modified form of
the usual Korteweg-deVries (KdV) equation. From this nonlinear
equation, a new type of solution for the ion-acoustic wave is
obtained. The effects of two-temperature electrons, gravity and dust
charge fluctuations on the ion-acoustic solitary waves are discussed
with possible applications.
Abstract: This paper presents a studyof the impact of reference
node locations on the accuracy of the indoor positioning systems. In
particular, we analyze the localization accuracy of the RSSI database
mapping techniques, deploying on the IEEE 802.15.4 wireless
networks. The results show that the locations of the reference nodes
used in the positioning systems affect the signal propagation
characteristics in the service area. Thisin turn affects the accuracy of the wireless indoor positioning system. We found that suitable
location of reference nodes could reduce the positioning error upto 35 %.
Abstract: The objective of this paper is to a design of pattern
classification model based on the back-propagation (BP) algorithm for
decision support system. Standard BP model has done full connection
of each node in the layers from input to output layers. Therefore, it
takes a lot of computing time and iteration computing for good
performance and less accepted error rate when we are doing some
pattern generation or training the network.
However, this model is using exclusive connection in between
hidden layer nodes and output nodes. The advantage of this model is
less number of iteration and better performance compare with standard
back-propagation model. We simulated some cases of classification
data and different setting of network factors (e.g. hidden layer number
and nodes, number of classification and iteration). During our
simulation, we found that most of simulations cases were satisfied by
BP based using exclusive connection network model compared to
standard BP. We expect that this algorithm can be available to
identification of user face, analysis of data, mapping data in between
environment data and information.
Abstract: The advancement in wireless technology with the wide
use of mobile devices have drawn the attention of the research and
technological communities towards wireless environments, such as
Wireless Local Area Networks (WLANs), Wireless Wide Area
Networks (WWANs), and mobile systems and ad-hoc networks.
Unfortunately, wired and wireless networks are expressively different
in terms of link reliability, bandwidth, and time of propagation delay
and by adapting new solutions for these enhanced
telecommunications, superior quality, efficiency, and opportunities
will be provided where wireless communications were otherwise
unfeasible. Some researchers define 4G as a significant improvement
of 3G, where current cellular network’s issues will be solved and data
transfer will play a more significant role. For others, 4G unifies
cellular and wireless local area networks, and introduces new routing
techniques, efficient solutions for sharing dedicated frequency bands,
and an increased mobility and bandwidth capacity. This paper
discusses the possible solutions and enhancements probabilities that
proposed to improve the performance of Transmission Control
Protocol (TCP) over different wireless networks and also the paper
investigated each approach in term of advantages and disadvantages.
Abstract: In a handwriting recognition problem, characters can
be represented using chain codes. The main problem in representing
characters using chain code is optimizing the length of the chain
code. This paper proposes to use randomized algorithm to minimize
the length of Freeman Chain Codes (FCC) generated from isolated
handwritten characters. Feedforward neural network is used in the
classification stage to recognize the image characters. Our test results
show that by applying the proposed model, we reached a relatively
high accuracy for the problem of isolated handwritten when tested on
NIST database.
Abstract: Renewable energy resources are inexhaustible, clean as compared with conventional resources. Also, it is used to supply regions with no grid, no telephone lines, and often with difficult accessibility by common transport. Satellite earth stations which located in remote areas are the most important application of renewable energy. Neural control is a branch of the general field of intelligent control, which is based on the concept of artificial intelligence. This paper presents the mathematical modeling of satellite earth station power system which is required for simulating the system.Aswan is selected to be the site under consideration because it is a rich region with solar energy. The complete power system is simulated using MATLAB–SIMULINK.An artificial neural network (ANN) based model has been developed for the optimum operation of earth station power system. An ANN is trained using a back propagation with Levenberg–Marquardt algorithm. The best validation performance is obtained for minimum mean square error. The regression between the network output and the corresponding target is equal to 96% which means a high accuracy. Neural network controller architecture gives satisfactory results with small number of neurons, hence better in terms of memory and time are required for NNC implementation. The results indicate that the proposed control unit using ANN can be successfully used for controlling the satellite earth station power system.
Abstract: Financial forecasting is an example of signal processing problems. A number of ways to train/learn the network are available. We have used Levenberg-Marquardt algorithm for error back-propagation for weight adjustment. Pre-processing of data has reduced much of the variation at large scale to small scale, reducing the variation of training data.