Abstract: Midpoint filter is quite effective in recovering the
images confounded by the short-tailed (uniform) noise. It, however,
performs poorly in the presence of additive long-tailed (impulse)
noise and it does not preserve the edge structures of the image
signals. Median smoother discards outliers (impulses) effectively, but
it fails to provide adequate smoothing for images corrupted with nonimpulse
noise. In this paper, two nonlinear techniques for image
filtering, namely, New Filter I and New Filter II are proposed based
on a nonlinear high-pass filter algorithm. New Filter I is constructed
using a midpoint filter, a highpass filter and a combiner. It suppresses
uniform noise quite well. New Filter II is configured using an alpha
trimmed midpoint filter, a median smoother of window size 3x3, the
high pass filter and the combiner. It is robust against impulse noise
and attenuates uniform noise satisfactorily. Both the filters are shown
to exhibit good response at the image boundaries (edges). The
proposed filters are evaluated for their performance on a test image
and the results obtained are included.
Abstract: Based on the sources- smoothed rank profile (SRP) and modified minimum description length (MMDL) principle, a method for estimation of the source coherency structure (SCS) and the number of wideband sources is proposed in this paper. Instead of focusing, we first use a spatial smoothing technique to pre-process the array covariance matrix of each frequency for de-correlating the sources and then use smoothed rank profile to determine the SCS and the number of wideband sources. We demonstrate the availability of the method by numerical simulations.
Abstract: Most of the Question Answering systems
composed of three main modules: question processing,
document processing and answer processing. Question
processing module plays an important role in QA systems. If
this module doesn't work properly, it will make problems for
other sections. Moreover answer processing module is an
emerging topic in Question Answering, where these systems
are often required to rank and validate candidate answers.
These techniques aiming at finding short and precise answers
are often based on the semantic classification.
This paper discussed about a new model for question
answering which improved two main modules, question
processing and answer processing.
There are two important components which are the bases
of the question processing. First component is question
classification that specifies types of question and answer.
Second one is reformulation which converts the user's
question into an understandable question by QA system in a
specific domain. Answer processing module, consists of
candidate answer filtering, candidate answer ordering
components and also it has a validation section for interacting
with user. This module makes it more suitable to find exact
answer. In this paper we have described question and answer
processing modules with modeling, implementing and
evaluating the system. System implemented in two versions.
Results show that 'Version No.1' gave correct answer to 70%
of questions (30 correct answers to 50 asked questions) and
'version No.2' gave correct answers to 94% of questions (47
correct answers to 50 asked questions).
Abstract: Due to the tremendous amount of information provided
by the World Wide Web (WWW) developing methods for mining
the structure of web-based documents is of considerable interest. In
this paper we present a similarity measure for graphs representing
web-based hypertext structures. Our similarity measure is mainly
based on a novel representation of a graph as linear integer strings,
whose components represent structural properties of the graph. The
similarity of two graphs is then defined as the optimal alignment of
the underlying property strings. In this paper we apply the well known
technique of sequence alignments for solving a novel and challenging
problem: Measuring the structural similarity of generalized trees.
In other words: We first transform our graphs considered as high
dimensional objects in linear structures. Then we derive similarity
values from the alignments of the property strings in order to
measure the structural similarity of generalized trees. Hence, we
transform a graph similarity problem to a string similarity problem for
developing a efficient graph similarity measure. We demonstrate that
our similarity measure captures important structural information by
applying it to two different test sets consisting of graphs representing
web-based document structures.
Abstract: The virulent debates that have dogged research on,
and the diffusion of, a wide range of technologies indicate a growing
loss of confidence in what we might call, the techno-scientific
endeavour to reshape the world. Utopian images of a world rendered
ever more amenable to human desires are now closely shadowed by
just as compelling dystopian visions of monstrosity and disaster that
are nevertheless constructed from the same cultural material. The
paper uses the case of the debates over developments in reproductive
technology to offer some observations on the ways in which such
technologies routinely become enmirred in cultural ambivalence.
Abstract: The purpose of this research was to study the behavior
trend factors of consumers to roasted coffee at the petrol station on
the route of Rangsit to Nakhon Nayok. The research drew upon data
collected from the regular consumers of roasted coffee stands. The
majority of respondents was male, 33-39 years old, and holding a
bachelor degree. The majority of respondents considered themselves
private business proprietors or entrepreneurs and had a monthly
income of between 10,000-16,000 baht. The regular coffee
consumers spent a minimum coffee expense of between 45 and 300
baht per day. These consumers also displayed good attitude and good
motivation which can be ranked as very high. From the hypothesis
testing of the behavior trend for the roasted coffee consumers in
repurchasing coffee and recommended the coffee to others, the
findings revealed that it had a significant correlation. Moreover, the
overall attitude towards the marketing mix factors also had a
significant correlation with the behavior trend consumers.
Abstract: The last two decades witnessed some advances in the development of an Arabic character recognition (CR) system. Arabic CR faces technical problems not encountered in any other language that make Arabic CR systems achieve relatively low accuracy and retards establishing them as market products. We propose the basic stages towards a system that attacks the problem of recognizing online Arabic cursive handwriting. Rule-based methods are used to perform simultaneous segmentation and recognition of word portions in an unconstrained cursively handwritten document using dynamic programming. The output of these stages is in the form of a ranked list of the possible decisions. A new technique for text line separation is also used.
Abstract: The refueling of a transparent rectangular fuel tank
fitted with a standard filler pipe and roll-over valve was
experimentally studied. A fuel-conditioning cart, capable of
handling fuels of different Reid vapor pressure at a constant
temperature, was used to dispense fuel at the desired rate. The
experimental protocol included transient recording of the tank and
filler tube pressures while video recording the flow patterns in the
filler tube and tank during the refueling process. This information
was used to determine the effect of changes in the vent tube
diameter, fuel-dispense flow rate and fuel Reid vapor pressure on the
pressure-time characteristics and the occurrence of premature fuel
filling shut-off and fuel spill-back. Pressure-time curves for the case
of normal shut-off demonstrated the classic, three-phase
characteristic noted in the literature. The variation of the maximum
values of tank dome and filler tube pressures are analyzed in relation
to the occurrence of premature shut-off.
Abstract: Author presents the results of a study conducted to identify criteria of efficient information system (IS) with serviceoriented architecture (SOA) realization and proposes a ranking method to evaluate SOA information systems using a set of architecture quality criteria before the systems are implemented. The method is used to compare 7 SOA projects and ranking result for SOA efficiency of the projects is provided. The choice of SOA realization project depends on following criteria categories: IS internal work and organization, SOA policies, guidelines and change management, processes and business services readiness, risk management and mitigation. The last criteria category was analyzed on the basis of projects statistics.
Abstract: The method of gait identification based on the nearest neighbor classification technique with motion similarity assessment by the dynamic time warping is proposed. The model based kinematic motion data, represented by the joints rotations coded by Euler angles and unit quaternions is used. The different pose distance functions in Euler angles and quaternion spaces are considered. To evaluate individual features of the subsequent joints movements during gait cycle, joint selection is carried out. To examine proposed approach database containing 353 gaits of 25 humans collected in motion capture laboratory is used. The obtained results are promising. The classifications, which takes into consideration all joints has accuracy over 91%. Only analysis of movements of hip joints allows to correctly identify gaits with almost 80% precision.
Abstract: This paper aimed to study the factors that relate to
working behavior of employees at Pakkred Municipality, Nonthaburi
Province. A questionnaire was utilized as the tool in collecting
information. Descriptive statistics included frequency, percentage,
mean and standard deviation. Independent- sample t- test, analysis of
variance and Pearson Correlation were also used. The findings of this
research revealed that the majority of the respondents were female,
between 25- 35 years old, married, with a Bachelor degree. The
average monthly salary of respondents was between 8,001- 12,000
Baht, and having about 4-7 years of working experience. Regarding
the overall working motivation factors, the findings showed that
interrelationship, respect, and acceptance were ranked as highly
important factors, whereas motivation, remunerations & welfare,
career growth, and working conditions were ranked as moderately
important factors. Also, overall working behavior was ranked as high.
The hypotheses testing revealed that different genders had a
different working behavior and had a different way of working as a
team, which was significant at the 0.05 confidence level, Moreover,
there was a difference among employees with different monthly
salary in working behavior, problem- solving and decision making,
which all were significant at the 0.05 confidence level. Employees
with different years of working experience were found to have work
working behavior both individual and as a team at the statistical
significance level of 0.01 and 0.05. The result of testing the
relationship between motivation in overall working revealed that
interrelationship, respect and acceptance from others, career growth,
and working conditions related to working behavior at a moderate
level, while motivation in performing duties and remunerations and
welfares related to working behavior towards the same direction at a
low level, with a statistical significance of 0.01.
Abstract: The objective of current study is to investigate the
differences of winning and losing teams in terms of goal scoring and
passing sequences. Total of 31 matches from UEFA-EURO 2012
were analyzed and 5 matches were excluded from analysis due to
matches end up drawn. There are two groups of variable used in the
study which is; i. the goal scoring variable and: ii. passing sequences
variable. Data were analyzed using Wilcoxon matched pair rank test
with significant value set at p < 0.05. Current study found the timing
of goal scored was significantly higher for winning team at 1st half
(Z=-3.416, p=.001) and 2nd half (Z=-3.252, p=.001). The scoring
frequency was also found to be increase as time progressed and the
last 15 minutes of the game was the time interval the most goals
scored. The indicators that were significantly differences between
winning and losing team were the goal scored (Z=-4.578, p=.000),
the head (Z=-2.500, p=.012), the right foot (Z=-3.788,p=.000),
corner (Z=-.2.126,p=.033), open play (Z=-3.744,p=.000), inside the
penalty box (Z=-4.174, p=.000) , attackers (Z=-2.976, p=.003) and
also the midfielders (Z=-3.400, p=.001). Regarding the passing
sequences, there are significance difference between both teams in
short passing sequences (Z=-.4.141, p=.000). While for the long
passing, there were no significance difference (Z=-.1.795, p=.073).
The data gathered in present study can be used by the coaches to
construct detailed training program based on their objectives.
Abstract: Feature selection plays an important role in applications with high dimensional data. The assessment of the stability of feature selection/ranking algorithms becomes an important issue when the dataset is small and the aim is to gain insight into the underlying process by analyzing the most relevant features. In this work, we propose a graphical approach that enables to analyze the similarity between feature ranking techniques as well as their individual stability. Moreover, it works with whatever stability metric (Canberra distance, Spearman's rank correlation coefficient, Kuncheva's stability index,...). We illustrate this visualization technique evaluating the stability of several feature selection techniques on a spectral binary dataset. Experimental results with a neural-based classifier show that stability and ranking quality may not be linked together and both issues have to be studied jointly in order to offer answers to the domain experts.
Abstract: The aim of the current work is to present a comparison among three popular optimization methods in the inverse elastostatics problem (IESP) of flaw detection within a solid. In more details, the performance of a simulated annealing, a Hooke & Jeeves and a sequential quadratic programming algorithm was studied in the test case of one circular flaw in a plate solved by both the boundary element (BEM) and the finite element method (FEM). The proposed optimization methods use a cost function that utilizes the displacements of the static response. The methods were ranked according to the required number of iterations to converge and to their ability to locate the global optimum. Hence, a clear impression regarding the performance of the aforementioned algorithms in flaw identification problems was obtained. Furthermore, the coupling of BEM or FEM with these optimization methods was investigated in order to track differences in their performance.
Abstract: Recently ORC(Organic Rankine Cycle) has attracted
much attention due to its potential in reducing consumption of fossil
fuels and its favorable characteristics to exploit low-grade heat sources.
In this work thermodynamic performance of ORC with superheating of
vapor is comparatively assessed for various working fluids. Special
attention is paid to the effects of system parameters such as the evaporating
temperature and the turbine inlet temperature on the characteristics
of the system such as maximum possible work extraction from
the given source, volumetric flow rate per 1 kW of net work and
quality of the working fluid at turbine exit as well as thermal and
exergy efficiencies. Results show that for a given source the thermal
efficiency increases with decrease of the superheating but exergy
efficiency may have a maximum value with respect to the superheating
of the working fluid. Results also show that in selection of working
fluid it is required to consider various criteria of performance characteristics
as well as thermal efficiency.
Abstract: Protein-protein interactions (PPI) play a crucial role in many biological processes such as cell signalling, transcription, translation, replication, signal transduction, and drug targeting, etc. Structural information about protein-protein interaction is essential for understanding the molecular mechanisms of these processes. Structures of protein-protein complexes are still difficult to obtain by biophysical methods such as NMR and X-ray crystallography, and therefore protein-protein docking computation is considered an important approach for understanding protein-protein interactions. However, reliable prediction of the protein-protein complexes is still under way. In the past decades, several grid-based docking algorithms based on the Katchalski-Katzir scoring scheme were developed, e.g., FTDock, ZDOCK, HADDOCK, RosettaDock, HEX, etc. However, the success rate of protein-protein docking prediction is still far from ideal. In this work, we first propose a more practical measure for evaluating the success of protein-protein docking predictions,the rate of first success (RFS), which is similar to the concept of mean first passage time (MFPT). Accordingly, we have assessed the ZDOCK bound and unbound benchmarks 2.0 and 3.0. We also createda new benchmark set for protein-protein docking predictions, in which the complexes have experimentally determined binding affinity data. We performed free energy calculation based on the solution of non-linear Poisson-Boltzmann equation (nlPBE) to improve the binding mode prediction. We used the well-studied thebarnase-barstarsystem to validate the parameters for free energy calculations. Besides,thenlPBE-based free energy calculations were conducted for the badly predicted cases by ZDOCK and ZRANK. We found that direct molecular mechanics energetics cannot be used to discriminate the native binding pose from the decoys.Our results indicate that nlPBE-based calculations appeared to be one of the promising approaches for improving the success rate of binding pose predictions.
Abstract: An effort has been taken to simulate the combustion
and performance characteristics of biodiesel fuel in direct injection
(D.I) low heat rejection (LHR) diesel engine. Comprehensive
analyses on combustion characteristics such as cylinder pressure,
peak cylinder pressure, heat release and performance characteristics
such as specific fuel consumption and brake thermal efficiency are
carried out. Compression ignition (C.I) engine cycle simulation was
developed and modified in to LHR engine for both diesel and
biodiesel fuel. On the basis of first law of thermodynamics the
properties at each degree crank angle was calculated. Preparation and
reaction rate model was used to calculate the instantaneous heat
release rate. A gas-wall heat transfer calculations are based on the
ANNAND-s combined heat transfer model with instantaneous wall
temperature to analyze the effect of coating on heat transfer. The
simulated results are validated by conducting the experiments on the
test engine under identical operating condition on a turbocharged D.I
diesel engine. In this analysis 20% of biodiesel (derived from
Jatropha oil) blended with diesel and used in both conventional and
LHR engine. The simulated combustion and performance
characteristics results are found satisfactory with the experimental
value.
Abstract: We study the semiconvergence of Gauss-Seidel iterative
methods for the least squares solution of minimal norm of rank
deficient linear systems of equations. Necessary and sufficient conditions
for the semiconvergence of the Gauss-Seidel iterative method
are given. We also show that if the linear system of equations is
consistent, then the proposed methods with a zero vector as an initial
guess converge in one iteration. Some numerical results are given to
illustrate the theoretical results.
Abstract: Ranking of fuzzy numbers play an important role in
decision making, optimization, forecasting etc. Fuzzy numbers must
be ranked before an action is taken by a decision maker. In this
paper, with the help of several counter examples it is proved that
ranking method proposed by Chen and Chen (Expert Systems with
Applications 36 (2009) 6833-6842) is incorrect. The main aim of this
paper is to propose a new approach for the ranking of generalized
trapezoidal fuzzy numbers. The main advantage of the proposed
approach is that the proposed approach provide the correct ordering
of generalized and normal trapezoidal fuzzy numbers and also the
proposed approach is very simple and easy to apply in the real life
problems. It is shown that proposed ranking function satisfies all
the reasonable properties of fuzzy quantities proposed by Wang and
Kerre (Fuzzy Sets and Systems 118 (2001) 375-385).
Abstract: This paper proposes a bi-objective model for the
facility location problem under a congestion system. The idea of the
model is motivated by applications of locating servers in bank
automated teller machines (ATMS), communication networks, and so
on. This model can be specifically considered for situations in which
fixed service facilities are congested by stochastic demand within
queueing framework. We formulate this model with two perspectives
simultaneously: (i) customers and (ii) service provider. The
objectives of the model are to minimize (i) the total expected
travelling and waiting time and (ii) the average facility idle-time.
This model represents a mixed-integer nonlinear programming
problem which belongs to the class of NP-hard problems. In addition,
to solve the model, two metaheuristic algorithms including nondominated
sorting genetic algorithms (NSGA-II) and non-dominated
ranking genetic algorithms (NRGA) are proposed. Besides, to
evaluate the performance of the two algorithms some numerical
examples are produced and analyzed with some metrics to determine
which algorithm works better.