Abstract: To meet the demands of wireless sensor networks
(WSNs) where data are usually aggregated at a single source prior to
transmitting to any distant user, there is a need to establish a tree
structure inside any given event region. In this paper , a novel
technique to create one such tree is proposed .This tree preserves the
energy and maximizes the lifetime of event sources while they are
constantly transmitting for data aggregation. The term Decentralized
Lifetime Maximizing Tree (DLMT) is used to denote this tree.
DLMT features in nodes with higher energy tend to be chosen as data
aggregating parents so that the time to detect the first broken tree link
can be extended and less energy is involved in tree maintenance. By
constructing the tree in such a way, the protocol is able to reduce the
frequency of tree reconstruction, minimize the amount of data loss
,minimize the delay during data collection and preserves the energy.
Abstract: This paper presents a generalized form of the
mechanistic deconvolution technique (GMD) to modeling image sensors applicable in various pan–tilt planes of view. The mechanistic deconvolution technique (UMD) is modified with the
given angles of a pan–tilt plane of view to formulate constraint parameters and characterize distortion effects, and thereby, determine
the corrected image data. This, as a result, does not require experimental setup or calibration. Due to the mechanistic nature of
the sensor model, the necessity for the sensor image plane to be
orthogonal to its z-axis is eliminated, and it reduces the dependency on image data. An experiment was constructed to evaluate the
accuracy of a model created by GMD and its insensitivity to changes in sensor properties and in pan and tilt angles. This was compared
with a pre-calibrated model and a model created by UMD using two sensors with different specifications. It achieved similar accuracy
with one-seventh the number of iterations and attained lower mean error by a factor of 2.4 when compared to the pre-calibrated and
UMD model respectively. The model has also shown itself to be robust and, in comparison to pre-calibrated and UMD model, improved the accuracy significantly.
Abstract: The Knowledge Management (KM) Criteria is an
essential foundation to evaluate KM outcomes. Different sets of
criteria were developed and tailored by many researchers to
determine the results of KM initiatives. However, literature review
has emphasized on incomplete set of criteria for evaluating KM
outcomes. Hence, this paper tried to address the problem of
determining the criteria for measuring knowledge management
outcomes among different types of Malaysian organizations.
Successively, this paper was assumed to develop widely accepted
criteria to measure success of knowledge management efforts for
Malaysian organizations. Our analysis approach was based on the
ANOVA procedure to compare a set of criteria among different types
of organizations. This set of criteria was exploited from literature
review. It is hoped that this study provides a better picture for
different types of Malaysian organizations to establish a
comprehensive set of criteria due to measure results of KM programs.
Abstract: The upgrading of low quality crude natural gas (NG) is attracting interest due to high demand of pipeline-grade gas in recent years. Membrane processes are commercially proven technology for the removal of impurities like carbon dioxide from NG. In this work, cross flow mathematical model has been suggested to be incorporated with ASPEN HYSYS as a user defined unit operation in order to design the membrane system for CO2/CH4 separation. The effect of operating conditions (such as feed composition and pressure) and membrane selectivity on the design parameters (methane recovery and total membrane area required for the separation) has been studied for different design configurations. These configurations include single stage (with and without recycle) and double stage membrane systems (with and without permeate or retentate recycle). It is shown that methane recovery can be improved by recycling permeate or retentate stream as well as by using double stage membrane systems. The ASPEN HYSYS user defined unit operation proposed in the study has potential to be applied for complex membrane system design and optimization.
Abstract: In this paper two mathematical models for definition of gas accidental escape localization in the gas pipelines are suggested. The first model was created for leak localization in the horizontal branched pipeline and second one for leak detection in inclined section of the main gas pipeline. The algorithm of leak localization in the branched pipeline did not demand on knowledge of corresponding initial hydraulic parameters at entrance and ending points of each sections of pipeline. For detection of the damaged section and then leak localization in this section special functions and equations have been constructed. Some results of calculations for compound pipelines having two, four and five sections are presented. Also a method and formula for the leak localization in the simple inclined section of the main gas pipeline are suggested. Some results of numerical calculations defining localization of gas escape for the inclined pipeline are presented.
Abstract: Interaction effects of xanthan gum (XG), carboxymethyl
cellulose (CMC), and locust bean gum (LBG) on the flow properties
of oil-in-water emulsions were investigated by a mixture design
experiment. Blends of XG, CMC and LBG were prepared according
to an augmented simplex-centroid mixture design (10 points) and used
at 0.5% (wt/wt) in the emulsion formulations. An appropriate
mathematical model was fitted to express each response as a function
of the proportions of the blend components that are able to
empirically predict the response to any blend of combination of the
components. The synergistic interaction effect of the ternary
XG:CMC:LBG blends at approximately 33-67% XG levels was
shown to be much stronger than that of the binary XG:LBG blend at
50% XG level (p < 0.05). Nevertheless, an antagonistic interaction
effect became significant as CMC level in blends was more than 33%
(p < 0.05). Yield stress and apparent viscosity (at 10 s-1) responses
were successfully fitted with a special quartic model while flow
behaviour index and consistency coefficient were fitted with a full
quartic model (R2
adjusted ≥ 0.90). This study found that a mixture
design approach could serve as a valuable tool in better elucidating
and predicting the interaction effects beyond the conventional twocomponent
blends.
Abstract: This paper describes a practical approach to design
and develop a hybrid learning with acceleration feedback control
(HLC) scheme for input tracking and end-point vibration suppression
of flexible manipulator systems. Initially, a collocated proportionalderivative
(PD) control scheme using hub-angle and hub-velocity
feedback is developed for control of rigid-body motion of the system.
This is then extended to incorporate a further hybrid control scheme
of the collocated PD control and iterative learning control with
acceleration feedback using genetic algorithms (GAs) to optimize the
learning parameters. Experimental results of the response of the
manipulator with the control schemes are presented in the time and
frequency domains. The performance of the HLC is assessed in terms
of input tracking, level of vibration reduction at resonance modes and
robustness with various payloads.
Abstract: This paper presents the vibrations suppression of a thermoelastic beam subject to sudden heat input by a distributed piezoelectric actuators. An optimization problem is formulated as the minimization of a quadratic functional in terms of displacement and velocity at a given time and with the least control effort. The solution method is based on a combination of modal expansion and variational approaches. The modal expansion approach is used to convert the optimal control of distributed parameter system into the optimal control of lumped parameter system. By utilizing the variational approach, an explicit optimal control law is derived and the determination of the corresponding displacement and velocity is reduced to solving a set of ordinary differential equations.
Abstract: The private theme parks are gradually surpassing
public-owned scenic areas after many years of development and have
become a mainstream choice for domestic tourists. Previous studies
show that visitors from different backgrounds differ in consumer
behavior and satisfaction factors. An understanding of visitor
satisfaction is therefore of extreme importance to operators of
privately-owned theme parks. Importance-Performance Analysis (IPA)
is used to measure consumer's potential satisfaction with services and
has become a widely used management tool for strength and weakness
analysis for brands, products, services and point of sales. As IPA has
so far not been used to evaluate the visitor satisfaction with
privately-owned theme parks, in this study the IPA method is used to
analyze visitor satisfaction with Janfusun Fancyworld (one of the most
popular private theme parks in Taiwan) and to rank visitor focus and
satisfaction on/in theme park facilities and services. Results of the
analysis provide private theme park operators with an understanding
of user or consumer demands as well as an assessment of the quality of
services currently offered.
Abstract: The seismic rehabilitation designs of two reinforced
concrete school buildings, representative of a wide stock of similar
edifices designed under earlier editions of the Italian Technical
Standards, are presented in this paper. The mutual retrofit solution
elaborated for the two buildings consists in the incorporation of a
dissipative bracing system including pressurized fluid viscous springdampers
as passive protective devices. The mechanical parameters,
layouts and locations selected for the constituting elements of the
system; the architectural renovation projects developed to properly
incorporate the structural interventions and improve the appearance
of the buildings; highlights of the installation works already
completed in one of the two structures; and a synthesis of the
performance assessment analyses carried out in original and
rehabilitated conditions, are illustrated. The results of the analyses
show a remarkable enhancement of the seismic response capacities of
both structures. This allows reaching the high performance objectives
postulated in the retrofit designs with much lower costs and
architectural intrusion as compared to traditional rehabilitation
interventions designed for the same objectives.
Abstract: Effectiveness of Artificial Neural Networks (ANN)
and Support Vector Machines (SVM) classifiers for fault diagnosis of
rolling element bearings are presented in this paper. The
characteristic features of vibration signals of rotating driveline that
was run in its normal condition and with faults introduced were used
as input to ANN and SVM classifiers. Simple statistical features such
as standard deviation, skewness, kurtosis etc. of the time-domain
vibration signal segments along with peaks of the signal and peak of
power spectral density (PSD) are used as features to input the ANN
and SVM classifier. The effect of preprocessing of the vibration
signal by Discreet Wavelet Transform (DWT) prior to feature
extraction is also studied. It is shown from the experimental results
that the performance of SVM classifier in identification of bearing
condition is better then ANN and pre-processing of vibration signal
by DWT enhances the effectiveness of both ANN and SVM classifier
Abstract: Thirty six samples from each (aerobic and anoxic)
activated sludge were collected from two wastewater treatment plants
with MBRs in Berlin, Germany. The samples were prepared for count
and definition of fungal isolates; these isolates were purified by
conventional techniques and identified by microscopic examination.
Sixty tow species belonging to 28 genera were isolated from
activated sludge samples under aerobic conditions (28 genera and 58
species) and anoxic conditions (26 genera and 52 species). The
obtained data show that, Aspergillus was found at 94.4% followed by
Penicillium 61.1 %, Fusarium (61.1 %), Trichoderma (44.4 %) and
Geotrichum candidum (41.6 %) species were the most prevalent in all
activated sludge samples. The study confirmed that fungi can thrive
in activated sludge and sporulation, but isolated in different numbers
depending on the effect of aeration system. Some fungal species in
our study are saprophytic, and other a pathogenic to plants and
animals.
Abstract: It is crucial to quantitatively evaluate the treatment of
epilepsy patients. This study was undertaken to test the hypothesis that
compared to the healthy control subjects, the epilepsy patients have
abnormal resting-state connectivity. In this study, we used the
imaginary part of coherency to measure the resting-state connectivity.
The analysis results shown that compared to the healthy control
subjects, epilepsy patients tend to have abnormal rhythm brain
connectivity over their epileptic focus.
Abstract: The vertex connectivity of a graph is the smallest number of vertices whose deletion separates the graph or makes it trivial. This work is devoted to the problem of vertex connectivity test of graphs in a distributed environment based on a general and a constructive approach. The contribution of this paper is threefold. First, using a preconstructed spanning tree of the considered graph, we present a protocol to test whether a given graph is 2-connected using only local knowledge. Second, we present an encoding of this protocol using graph relabeling systems. The last contribution is the implementation of this protocol in the message passing model. For a given graph G, where M is the number of its edges, N the number of its nodes and Δ is its degree, our algorithms need the following requirements: The first one uses O(Δ×N2) steps and O(Δ×logΔ) bits per node. The second one uses O(Δ×N2) messages, O(N2) time and O(Δ × logΔ) bits per node. Furthermore, the studied network is semi-anonymous: Only the root of the pre-constructed spanning tree needs to be identified.
Abstract: The objective of this project is to produce computer
assisted instruction(CAI) for welding and brazing in order to
determine the efficiency of the instruction package and the study
accomplishment of learner by studying through computer assisted
instruction for welding and brazing it was examined through the
target group surveyed from the 30 students studying in the two year
of 5-year-academic program, department of production technology
education, faculty of industrial education and technology, king
mongkut-s university of technology thonburi. The result of the
research indicated that the media evaluated by experts and subject
matter quality evaluation of computer assisted instruction for welding
and brazing was in line for the good criterion. The mean of score
evaluated before the study, during the study and after the study was
34.58, 83.33 and 83.43, respectively. The efficiency of the lesson was
83.33/83.43 which was higher than the expected value, 80/80. The
study accomplishment of the learner, who utilizes computer assisted
instruction for welding and brazing as a media, was higher and equal
to the significance statistical level of 95%. The value was 1.669
which was equal to 35.36>1.669. It could be summarized that
computer assisted instruction for welding and brazing was the
efficient media to use for studying and teaching.
Abstract: Sustainability and sustainable development have been
the main theme of many international conferences, such the UN Rio
de Janeiro 1992 Earth Summit This was followed by the appearance
of the global conferences at the late of the nineties and the early of
2000 to confirm the importance of the sustainable development .it
was focused on the importance of the economic development as it is
considered an effective tool in the operations of the sustainable
development. Industry plays a critical role in technological
innovations and research and development activities, which are
crucial for the economic and social development of any country.
Transportation and mobility are an important part or urban
economics and the quality of life. To analyze urban transportation
and its environmental impacts, a comprehensive approach is needed.
So this research aims to apply new approach for the development of
the urban communities that insure the continuity and facing the
deterioration. This approach aims to integrate sustainable transport
solutions with economic development and community development.
For that purpose we will concentrate on one of the most sustainable
cities in the world (Curitiba in Brazil) which provides the world with
a model in how to integrate sustainable transport considerations into
business development, road infrastructure development, and local
community development.
Abstract: In this research, effect of combustion reaction
mechanism on direct initiation of detonation has been studied
numerically. For this purpose, reaction mechanism has been
simulated by using a three-step chemical kinetics model. The reaction
scheme consists sequentially of a chain-initiation and chainbranching
step, followed by a temperature -independent chaintermination.
In a previous research, the effect of chain-branching on
the direct initiation of detonation is studied. In this research effect of
chain-initiation on direct initiation of detonation is investigated. For
the investigation, first a characteristic time (τ) for each step of
mechanism, which includes effect of different kinetics parameters, is
defined. Then the effect of characteristic time of chain-initiation (τI)
on critical initiation energy is studied. It is seen that increasing τI,
causes critical initiation energy to be increased. Drawing detonation's
shock pressure diagrams for different cases, shows that in small value
of τI , kinetics has more important effect on the behavior of the wave.
Abstract: As the demand and prices of various petroleum products have been on the rise in recent years, there is a growing need for alternative fuels. Biodiesel, which consists of alkyl monoesters of fatty acids from vegetable oils and animal fats, is considered as an alternative to petroleum diesel. Biodiesel has comparable performance with that of diesel and has lower brake specific fuel consumption than diesel with significant reduction in emissions of CO, hydrocarbons (HC) and smoke with however, a slight increase in NOx emissions. This paper analyzes the effect of cooled exhaust gas recirculation in the combustion characteristics of a direct injection compression ignition engine using biodiesel blended fuel as opposed to the conventional system. The combustion parameters such as cylinder pressure, heat release rate, delay period and peak pressure were analyzed at various loads. The maximum cylinder pressure reduces as the fraction of biodiesel increases in the blend the maximum rate of pressure rise was found to be higher for diesel at higher engine loads.
Abstract: Many works have been carried out to compare the
efficiency of several goodness of fit procedures for identifying
whether or not a particular distribution could adequately explain a
data set. In this paper a study is conducted to investigate the power
of several goodness of fit tests such as Kolmogorov Smirnov (KS),
Anderson-Darling(AD), Cramer- von- Mises (CV) and a proposed
modification of Kolmogorov-Smirnov goodness of fit test which
incorporates a variance stabilizing transformation (FKS). The
performances of these selected tests are studied under simple
random sampling (SRS) and Ranked Set Sampling (RSS). This
study shows that, in general, the Anderson-Darling (AD) test
performs better than other GOF tests. However, there are some
cases where the proposed test can perform as equally good as the
AD test.
Abstract: In this paper, Novel method, Particle Swarm Optimization (PSO) algorithm, based technique is proposed to estimate and analyze the steady state performance of self-excited induction generator (SEIG). In this novel method the tedious job of deriving the complex coefficients of a polynomial equation and solving it, as in previous methods, is not required. By comparing the simulation results obtained by the proposed method with those obtained by the well known mathematical methods, a good agreement between these results is obtained. The comparison validates the effectiveness of the proposed technique.