Abstract: Data Mining aims at discovering knowledge out of
data and presenting it in a form that is easily comprehensible to
humans. One of the useful applications in Egypt is the Cancer
management, especially the management of Acute Lymphoblastic
Leukemia or ALL, which is the most common type of cancer in
children.
This paper discusses the process of designing a prototype that can
help in the management of childhood ALL, which has a great
significance in the health care field. Besides, it has a social impact
on decreasing the rate of infection in children in Egypt. It also
provides valubale information about the distribution and
segmentation of ALL in Egypt, which may be linked to the possible
risk factors.
Undirected Knowledge Discovery is used since, in the case of this
research project, there is no target field as the data provided is
mainly subjective. This is done in order to quantify the subjective
variables. Therefore, the computer will be asked to identify
significant patterns in the provided medical data about ALL. This
may be achieved through collecting the data necessary for the
system, determimng the data mining technique to be used for the
system, and choosing the most suitable implementation tool for the
domain.
The research makes use of a data mining tool, Clementine, so as to
apply Decision Trees technique. We feed it with data extracted from
real-life cases taken from specialized Cancer Institutes. Relevant
medical cases details such as patient medical history and diagnosis
are analyzed, classified, and clustered in order to improve the disease
management.
Abstract: One field experiment was conducted on corn (Zea
mays L.Var. SC 704) to study the effect of three different basic levels
of nitrogen (90, 140and 190 Kg/ha as urea) with 0.01% and 0.02%
pyridoxine pre-sowing seed soaking for 8 hours. Water-soaked seeds
were treated as controled. biomass production was recorded on 45,
70 and 95 days after sowing. Total dry material (TDM), leaf area
index (LAI), crop growth rate (CGR), relative growth rate (RGR) and
net assimilation rate (NAR) was calculated form 45until 95 days after
sowing. Yield and its components such as kernel yield, grain weight,
biologic yield, harvest index and protein percentage was measured at
harvest. In general, 0.02% pyridoxine and 190 Kg pure nitrogen/ha
was shown gave maximum value for growth and yield parameters.
N190 + 0.02 % pyridoxine enhanced seed yield and biologic yield by
57.15% and 62.98% compared to 90kg N and water – soaked
treatment.
Abstract: Natural frequencies and dynamic response of a spur
gear sector are investigated using a two dimensional finite element
model that offers significant advantages for dynamic gear analyses.
The gear teeth are analyzed for different operating speeds. A primary
feature of this modeling is determination of mesh forces using a
detailed contact analysis for each time step as the gears roll through
the mesh. ANSYS software has been used on the proposed model to
find the natural frequencies by Block Lanczos technique and
displacements and dynamic stresses by transient mode super position
method. The effect of rotational speed of the gear on the dynamic
response of gear tooth has been studied and design limits have been
discussed.
Abstract: There are many real world problems in which
parameters like the arrival time of new jobs, failure of resources, and
completion time of jobs change continuously. This paper tackles the
problem of scheduling jobs with random due dates on multiple
identical machines in a stochastic environment. First to assign jobs to
different machine centers LPT scheduling methods have been used,
after that the particular sequence of jobs to be processed on the
machine have been found using simple stochastic techniques. The
performance parameter under consideration has been the maximum
lateness concerning the stochastic due dates which are independent
and exponentially distributed. At the end a relevant problem has been
solved using the techniques in the paper..
Abstract: The new idea of analyze of power system failure with
use of artificial neural network is proposed. An analysis of the
possibility of simulating phenomena accompanying system faults and
restitution is described. It was indicated that the universal model for
the simulation of phenomena in whole analyzed range does not exist.
The main classic method of search of optimal structure and
parameter identification are described shortly. The example with
results of calculation is shown.
Abstract: The objective of this research is to study the technical
and economic performance of wind/diesel/battery (W/D/B) system
supplying a remote small gathering of six families using HOMER
software package. The electrical energy is to cater for the basic needs
for which the daily load pattern is estimated. Net Present Cost (NPC)
and Cost of Energy (COE) are used as economic criteria, while the measure of performance is % of power shortage. Technical and
economic parameters are defined to estimate the feasibility of the
system under study. Optimum system configurations are estimated for two sites. Using HOMER software, the simulation results showed that W/D/B systems are economical for the assumed community sites
as the price of generated electricity is about 0.308 $/kWh, without
taking external benefits into considerations. W/D/B systems are more
economical than W/B or diesel alone systems, as the COE is 0.86 $/kWh for W/B and 0.357 $/kWh for diesel alone.
Abstract: Shoots, with three leaves, of Paphiopedilum 'Delrosi'
were used as explants for multiple shoot induction. Modified
Hyponex medium was supplemented with thidiazuron (TDZ), N6-
benzyladenine (BA) or kinetin (Kn) alone and in combinations with
2,4-dichlorophenoxyacetic acid (2,4-D). All explants were cultured
for 15 weeks. It was found that TDZ alone at the concentration of
0.45μM or in combination with 4.52μM 2,4-D and 8.88μM BA in
combination with 13.56μM 2,4-D promoted multiple shoots. The
highest shoot sprouting efficiencies (80.0, 90.0 and 80.0%) and new
shoot numbers (1.5, 1.3 and 1.1) were obtained, respectively. Fresh
weight, height, numbers of leaf and root of new shoots and initial
explants were discussed.
Abstract: The optimization problem using time scales is studied.
Time scale is a model of time. The language of time scales seems to
be an ideal tool to unify the continuous-time and the discrete-time
theories. In this work we present necessary conditions for a solution
of an optimization problem on time scales. To obtain that result we
use properties and results of the partial diamond-alpha derivatives for
continuous-multivariable functions. These results are also presented
here.
Abstract: An Automated Rapid Maxillary Expander (ARME) is
a specially designed microcontroller-based orthodontic appliance to
overcome the shortcomings imposed by the traditional maxillary
expansion appliances. This new device is operates by automatically
widening the maxilla (upper jaw) by expanding the midpalatal suture
[1]. The ARME appliance that has been developed is a combination
of modified butterfly expander appliance, micro gear, micro motor,
and microcontroller to automatically produce light and continuous
pressure to expand the maxilla. For this study, the functionality of the
system is verified through laboratory tests by measure the forced
applied to the teeth each time the maxilla expands. The laboratory
test results show that the developed appliance meets the desired
performance specifications consistently.
Abstract: The deviation between the target state variable and the
practical state variable should be used to form the state tending factor
of complex systems, which can reflect the process for the complex
system to tend rationalization. Relating to the system of basic
equations of complete factor synergetics consisting of twenty
nonlinear stochastic differential equations, the two new models are
considered to set, which should be called respectively the
rationalizing tendency model and the non- rationalizing tendency
model. Therefore we can extend the theory of programming with the
objective function & constraint condition suitable only for the realm
of man-s activities into the new analysis with the tendency function &
constraint condition suitable for all the field of complex system.
Abstract: A novel nanofinishing process using improved ball
end magnetorheological (MR) finishing tool was developed for finishing of flat as well as 3D surfaces of ferromagnetic and non ferromagnetic workpieces. In this process a magnetically controlled
ball end of smart MR polishing fluid is generated at the tip surface of
the tool which is used as a finishing medium and it is guided to
follow the surface to be finished through computer controlled 3-axes
motion controller. The experiments were performed on ferromagnetic
workpiece surface in the developed MR finishing setup to study the effect of finishing time on final surface roughness. The performance
of present finishing process on final finished surface roughness was studied. The surface morphology was observed under scanning
electron microscopy and atomic force microscope. The final surface finish was obtained as low as 19.7 nm from the initial surface
roughness of 142.9 nm. The outcome of newly developed finishing process can be found useful in its applications in aerospace,
automotive, dies and molds manufacturing industries, semiconductor and optics machining etc.
Abstract: Semantic Web Technologies enable machines to
interpret data published in a machine-interpretable form on the web.
At the present time, only human beings are able to understand the
product information published online. The emerging semantic Web
technologies have the potential to deeply influence the further
development of the Internet Economy. In this paper we propose a
scenario based research approach to predict the effects of these new
technologies on electronic markets and business models of traders
and intermediaries and customers. Over 300 million searches are
conducted everyday on the Internet by people trying to find what
they need. A majority of these searches are in the domain of
consumer ecommerce, where a web user is looking for something to
buy. This represents a huge cost in terms of people hours and an
enormous drain of resources. Agent enabled semantic search will
have a dramatic impact on the precision of these searches. It will
reduce and possibly eliminate information asymmetry where a better
informed buyer gets the best value. By impacting this key
determinant of market prices semantic web will foster the evolution
of different business and economic models. We submit that there is a
need for developing these futuristic models based on our current
understanding of e-commerce models and nascent semantic web
technologies. We believe these business models will encourage
mainstream web developers and businesses to join the “semantic web
revolution."
Abstract: In this paper, we explore the applicability of the Sinc-
Collocation method to a three-dimensional (3D) oceanography model.
The model describes a wind-driven current with depth-dependent
eddy viscosity in the complex-velocity system. In general, the
Sinc-based methods excel over other traditional numerical methods
due to their exponentially decaying errors, rapid convergence and
handling problems in the presence of singularities in end-points.
Together with these advantages, the Sinc-Collocation approach that
we utilize exploits first derivative interpolation, whose integration
is much less sensitive to numerical errors. We bring up several
model problems to prove the accuracy, stability, and computational
efficiency of the method. The approximate solutions determined by
the Sinc-Collocation technique are compared to exact solutions and
those obtained by the Sinc-Galerkin approach in earlier studies. Our
findings indicate that the Sinc-Collocation method outperforms other
Sinc-based methods in past studies.
Abstract: The identification and classification of the spine deformity play an important role when considering surgical planning for adolescent patients with idiopathic scoliosis. The subject of this article is the Lenke classification of scoliotic spines using Cobb angle measurements. The purpose is two-fold: (1) design a rulebased diagram to assist clinicians in the classification process and (2) investigate a computer classifier which improves the classification time and accuracy. The rule-based diagram efficiency was evaluated in a series of scoliotic classifications by 10 clinicians. The computer classifier was tested on a radiographic measurement database of 603 patients. Classification accuracy was 93% using the rule-based diagram and 99% for the computer classifier. Both the computer classifier and the rule based diagram can efficiently assist clinicians in their Lenke classification of spine scoliosis.
Abstract: The empirical studies on High Performance Work Systems (HPWSs) and their impacts on firm performance have remarkably little in the developing countries. This paper reviews literatures on the HPWSs practices in different work settings, Western and Asian countries. A review on the empirical research leads to a conclusion that, country differences influence the Human Resource Management (HRM) practices. It is anticipated that there are similarities and differences in the extent of implementation of HPWSs practices by the Malaysian manufacturing firms due to the organizational contextual factors and, the HPWSs have a significant impact on firms- better performance amongst MNCs and local firms.
Abstract: Green house effect has becomes a serious concern in
many countries due to the increase consumption of the fossil fuel.
There have been many studies to find an alternative power source.
Wind energy found to be one of the most useful solutions to help in
overcoming the air pollution and global. There is no agreed solution
to conversion of wind energy to electrical energy. In this paper, the
advantages of using a Switched Reluctance Generator (SRG) for
wind energy applications. The theoretical study of the self excitation
of a SRG and the determination of the variable parameters in a SRG
design are discussed. The design parameters for the maximum power
output of the SRG are computed using Matlab simulation. The
designs of the circuit to control the variable parameters in a SRG to
provide the maximum power output are also discussed.
Abstract: In this paper, subtractive clustering based fuzzy inference system approach is used for early detection of faults in the function oriented software systems. This approach has been tested with real time defect datasets of NASA software projects named as PC1 and CM1. Both the code based model and joined model (combination of the requirement and code based metrics) of the datasets are used for training and testing of the proposed approach. The performance of the models is recorded in terms of Accuracy, MAE and RMSE values. The performance of the proposed approach is better in case of Joined Model. As evidenced from the results obtained it can be concluded that Clustering and fuzzy logic together provide a simple yet powerful means to model the earlier detection of faults in the function oriented software systems.
Abstract: Due to the mobility of users, many information
systems are now developed with the capability of supporting retrieval
of information from both static and mobile users. Hence, the
amount, content and format of the information retrieved will need to
be tailored according to the device and the user who requested for it.
Thus, this paper presents a framework for the design and
implementation of such a system, which is to be developed for
communicating final examination related information to the
academic community at one university in Malaysia. The concept of
personalization will be implemented in the system so that only highly
relevant information will be delivered to the users. The
personalization concept used will be based on user profiling as well
as context. The system in its final state will be accessible through cell
phones as well as intranet connected personal computers.
Abstract: In this paper a new approach is proposed for the
adaptation of the simulated annealing search in the field of the
Multi-Objective Optimization (MOO). This new approach is called
Multi-Case Multi-Objective Simulated Annealing (MC-MOSA). It
uses some basics of a well-known recent Multi-Objective Simulated
Annealing proposed by Ulungu et al., which is referred in the
literature as U-MOSA. However, some drawbacks of this algorithm
have been found, and are substituted by other ones, especially in
the acceptance decision criterion. The MC-MOSA has shown better
performance than the U-MOSA in the numerical experiments. This
performance is further improved by some other subvariants of the
MC-MOSA, such as Fast-annealing MC-MOSA, Re-annealing MCMOSA
and the Two-Stage annealing MC-MOSA.
Abstract: A model is presented to find the optimal design of the
mixed renewable warranty policy for non-repairable Weibull life
products. The optimal design considers the conflict of interests
between the customer and the manufacturer: the customer interests
are longer full rebate coverage period and longer total warranty
coverage period, the manufacturer interests are lower warranty cost
and lower risk. The design factors are full rebate and total warranty
coverage periods. Results showed that mixed policy is better than full
rebate policy in terms of risk and total warranty coverage period in all
of the three bathtub regions. In addition, results showed that linear
policy is better than mixed policy in infant mortality and constant
failure regions while the mixed policy is better than linear policy in
ageing region of the model. Furthermore, the results showed that
using burn-in period for infant mortality products reduces warranty
cost and risk.